From: Takashi Iwai <tiwai@suse.de>
To: Raymond <rayau@netvigator.com>
Cc: alsa-devel@lists.sourceforge.net, openvortex-dev@nongnu.org
Subject: Re: Re: [ALSA - driver 0001138]: errors when installing au8820 modules
Date: Fri, 29 Jul 2005 17:09:27 +0200 [thread overview]
Message-ID: <s5hoe8lbqe0.wl%tiwai@suse.de> (raw)
In-Reply-To: <42EA4086.6030702@netvigator.com>
At Fri, 29 Jul 2005 22:43:18 +0800,
Raymond wrote:
>
> Takashi Iwai wrote:
> > At Wed, 08 Jun 2005 17:06:39 +0800,
> > Raymond wrote:
> >
> >
> >>Is there any reason to make this change ?
> >>
> >>alsa-kernel/pci/au88x0/au88x0.c
> >>@@ -144,15 +144,18 @@
> >> // check PCI availability (DMA).
> >> if ((err = pci_enable_device(pci)) < 0)
> >> return err;
> >>- if (!pci_dma_supported(pci, VORTEX_DMA_MASK)) {
> >>+ if (pci_set_dma_mask(pci, VORTEX_DMA_MASK) < 0 ||
> >>+ pci_set_consistent_dma_mask(pci, VORTEX_DMA_MASK) < 0) {
> >> printk(KERN_ERR "error to set DMA mask\n");
> >>+ pci_disable_device(pci);
> >> return -ENXIO;
> >> }
> >>- pci_set_dma_mask(pci, VORTEX_DMA_MASK);
> >
> >
> > This is clean up.
> >
> >
> >> chip = kcalloc(1, sizeof(*chip), GFP_KERNEL);
> >>- if (chip == NULL)
> >>+ if (chip == NULL) {
> >>+ pci_disable_device(pci);
> >> return -ENOMEM;
> >>+ }
> >
> >
> > This fixes the PCI state in the error path.
> >
> >
> >> chip->card = card;
> >>
> >>@@ -202,6 +205,8 @@
> >> goto alloc_out;
> >> }
> >>
> >>+ snd_card_set_dev(card, &pci->dev);
> >>+
> >> *rchip = chip;
> >
> >
> > And this sets up the missing sysfs stuff.
> >
> >
>
> It seem that these two patches for Kernel 2.6 were lost when au88x0
> migrate from alsa-driver to alsa-kernel.
You're right. It seems dropped at that time accidentally.
Could you care to post a patch to fix them?
thanks,
Takashi
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September
19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
next prev parent reply other threads:[~2005-07-29 15:09 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-28 20:22 [ALSA - driver 0001138]: errors when installing au8820 modules bugtrack
2005-06-06 2:09 ` Raymond
2005-06-06 15:49 ` Takashi Iwai
2005-06-07 15:05 ` Raymond
2005-06-07 15:16 ` Alien
2005-06-07 16:29 ` Takashi Iwai
2005-06-07 17:05 ` [Openvortex-dev] " Igor Kovalenko
2005-06-07 17:17 ` Alien
2005-06-07 17:38 ` Igor Kovalenko
2005-06-07 18:02 ` Alien
2005-06-08 10:18 ` Takashi Iwai
2005-06-08 11:13 ` Alien
2005-06-08 12:12 ` Takashi Iwai
2005-06-08 13:29 ` Alien
2005-06-08 13:41 ` Takashi Iwai
2005-06-08 18:09 ` Igor Kovalenko
2005-06-08 11:40 ` Raymond
2005-06-08 12:19 ` Takashi Iwai
2005-06-08 18:12 ` Igor Kovalenko
2005-06-09 8:13 ` Raymond
2005-06-08 12:34 ` Raymond
2005-06-08 12:43 ` Takashi Iwai
2005-06-08 18:03 ` Igor Kovalenko
2005-06-09 8:54 ` Raymond
2005-06-28 7:50 ` Raymond
2005-07-01 19:03 ` Igor Kovalenko
2005-07-02 12:53 ` Raymond
2005-07-14 16:43 ` Igor Kovalenko
2005-06-08 9:06 ` Raymond
2005-06-08 10:22 ` Takashi Iwai
2005-06-09 8:34 ` Raymond
2005-06-09 10:17 ` [Openvortex-dev] " Igor Kovalenko
2005-06-12 15:18 ` Raymond
2005-06-10 7:35 ` Raymond
2005-06-10 10:33 ` Takashi Iwai
2005-06-10 11:28 ` Raymond
2005-07-29 14:43 ` Raymond
2005-07-29 15:09 ` Takashi Iwai [this message]
2005-08-05 12:46 ` Raymond
2005-08-05 14:32 ` Takashi Iwai
[not found] ` <43067D3B.5040601@netvigator.com>
2005-08-21 12:41 ` Takashi Iwai
2005-08-23 15:20 ` Raymond
2005-08-23 17:18 ` Takashi Iwai
2005-08-23 21:40 ` Alien
2005-08-24 10:35 ` Takashi Iwai
2005-08-25 17:12 ` Raymond
2005-08-25 17:43 ` Alien
2005-08-26 9:01 ` Raymond
2005-08-25 18:58 ` Manuel Jander
2005-08-25 20:04 ` Alien
2005-06-08 10:23 ` Alien
2005-06-09 8:49 ` Raymond
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hoe8lbqe0.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=openvortex-dev@nongnu.org \
--cc=rayau@netvigator.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox