From: Takashi Iwai <tiwai@suse.de>
To: mengdong.lin@intel.com
Cc: pshou@realtek.com, alsa-devel@alsa-project.org, kailang@realtek.com
Subject: Re: [RFC PATCH] ALSA: hda - reset hda link during system/runtime suspend
Date: Mon, 24 Jun 2013 09:44:12 +0200 [thread overview]
Message-ID: <s5hr4fsvtpv.wl%tiwai@suse.de> (raw)
In-Reply-To: <1372083534-9706-1-git-send-email-mengdong.lin@intel.com>
At Mon, 24 Jun 2013 10:18:54 -0400,
mengdong.lin@intel.com wrote:
>
> From: Mengdong Lin <mengdong.lin@intel.com>
>
> If all the codecs report ClkStopOK (OK to stop bus clock) after being put to
> D3, this patch will reset the HDA link before the controller is put to D3.
>
> So the link will be in reset during system or runtime suspend, the bus clock
> stops and the codecs are in D3(ClkStop) state.
>
> This may help to reduce power consumption by dozens of mW on some peripheral
> hda codecs.
Do you have the actually measured result, or is it just a hypothesis?
The patch looks safe, so I'm going to apply it, but would like to know
the influence.
thanks,
Takashi
>
> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
>
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index f089fa0..9f110c7 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -1120,6 +1120,20 @@ static void azx_load_dsp_cleanup(struct hda_bus *bus,
> struct snd_dma_buffer *dmab);
> #endif
>
> +/* enter link reset */
> +static void azx_reset_link(struct azx *chip)
> +{
> + unsigned long timeout;
> +
> + /* reset controller */
> + azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_RESET);
> +
> + timeout = jiffies + msecs_to_jiffies(100);
> + while ((azx_readb(chip, GCTL) & ICH6_GCTL_RESET) &&
> + time_before(jiffies, timeout))
> + usleep_range(500, 1000);
> +}
> +
> /* reset codec link */
> static int azx_reset(struct azx *chip, int full_reset)
> {
> @@ -2894,6 +2908,7 @@ static int azx_suspend(struct device *dev)
> if (chip->initialized)
> snd_hda_suspend(chip->bus);
> azx_stop_chip(chip);
> + azx_reset_link(chip);
> if (chip->irq >= 0) {
> free_irq(chip->irq, chip);
> chip->irq = -1;
> @@ -2946,6 +2961,7 @@ static int azx_runtime_suspend(struct device *dev)
> struct azx *chip = card->private_data;
>
> azx_stop_chip(chip);
> + azx_reset_link(chip);
> azx_clear_irq_pending(chip);
> return 0;
> }
> --
> 1.7.10.4
>
next prev parent reply other threads:[~2013-06-24 7:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-24 14:18 [RFC PATCH] ALSA: hda - reset hda link during system/runtime suspend mengdong.lin
2013-06-24 7:44 ` Takashi Iwai [this message]
2013-06-24 8:47 ` David Henningsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hr4fsvtpv.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=kailang@realtek.com \
--cc=mengdong.lin@intel.com \
--cc=pshou@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox