Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH RFC 5/9] ALSA: core: selection of audio_tstamp	type and accuracy reports
Date: Wed, 10 Dec 2014 17:35:55 +0100	[thread overview]
Message-ID: <s5hsignmphw.wl-tiwai@suse.de> (raw)
In-Reply-To: <1418077426-8309-6-git-send-email-pierre-louis.bossart@linux.intel.com>

Just a minor issue before going to detailed review:

At Mon,  8 Dec 2014 16:23:42 -0600,
Pierre-Louis Bossart wrote:
> 
> +/* user space provides config to kernel */
> +struct snd_pcm_audio_tstamp_config {
> +	__u32 type_requested:4;
> +	__u32 report_delay:1; /* add total delay to A/D or D/A */
> +};
....
> +/* kernel provides report to user-space */
> +struct snd_pcm_audio_tstamp_report {
> +	/* actual type if hardware could not support requested timestamp */
> +	__u32 actual_type:4;
> +
> +	/* accuracy represented in mantissa/exponent form */
> +	__u32 accuracy_report:1; /* 0 if accuracy unknown, 1 if rest of structure is valid */
> +	__u32 accuracy_m:7; /* 0..127, ~3 significant digit for mantissa */
> +	__u32 accuracy_e:4; /* base10 exponent, 0 for ns, 3 for us, 6 for ms, 9 for s */
> +};

Please avoid the bit fields in these, since these values will be a
part of ABI.  There is absolutely no compatibility when you're using
bitfields.  Use the explicit bit operations.


thanks,

Takashi

  reply	other threads:[~2014-12-10 16:35 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-08 22:23 [PATCH RFC 0/9] audio timestamping evolutions Pierre-Louis Bossart
2014-12-08 22:23 ` [PATCH RFC 1/9] ALSA: core: don't override timestamp unconditionally Pierre-Louis Bossart
2014-12-08 22:23 ` [PATCH RFC 2/9] ALSA: core: allow for trigger_tstamp snapshot in .trigger Pierre-Louis Bossart
2014-12-10 16:31   ` Takashi Iwai
2014-12-10 17:22     ` Pierre-Louis Bossart
2014-12-10 17:35       ` Takashi Iwai
2014-12-10 18:43         ` Pierre-Louis Bossart
2014-12-10 19:20           ` Takashi Iwai
2014-12-08 22:23 ` [PATCH RFC 3/9] ALSA: hda: read trigger_timestamp immediately after starting DMA Pierre-Louis Bossart
2014-12-08 22:23 ` [PATCH RFC 4/9] ALSA: usb: update trigger timestamp on first non-zero URB submitted Pierre-Louis Bossart
2014-12-08 22:23 ` [PATCH RFC 5/9] ALSA: core: selection of audio_tstamp type and accuracy reports Pierre-Louis Bossart
2014-12-10 16:35   ` Takashi Iwai [this message]
2014-12-10 17:27     ` Pierre-Louis Bossart
2014-12-10 17:39       ` Takashi Iwai
2014-12-10 20:08         ` Takashi Iwai
2014-12-10 21:48           ` Pierre-Louis Bossart
2014-12-10 22:27             ` Takashi Iwai
2014-12-10 23:04               ` Pierre-Louis Bossart
2014-12-11  5:54                 ` Takashi Iwai
2014-12-12  2:36                   ` Pierre-Louis Bossart
2014-12-12  8:37                     ` Takashi Iwai
2014-12-12 15:20                       ` Pierre-Louis Bossart
2014-12-14 15:03                         ` Takashi Iwai
2014-12-16 14:01               ` Tim Cussins
2014-12-08 22:23 ` [PATCH RFC 6/9] ALSA: core: pass audio tstamp config from userspace Pierre-Louis Bossart
2014-12-10 17:28   ` Takashi Iwai
2014-12-10 17:35     ` Pierre-Louis Bossart
2014-12-10 17:40       ` Takashi Iwai
2014-12-08 22:23 ` [PATCH RFC 7/9] ALSA: core: pass audio tstamp config from userspace in compat mode Pierre-Louis Bossart
2014-12-08 22:23 ` [PATCH RFC 8/9] ALSA: core: replace .wall_clock by .get_time_info Pierre-Louis Bossart
2014-12-08 22:23 ` [PATCH RFC 9/9] ALSA: hda: replace .wallclock " Pierre-Louis Bossart
2014-12-10  4:40 ` [PATCH RFC 0/9] audio timestamping evolutions Raymond Yau
2014-12-10 14:55   ` Pierre-Louis Bossart
2014-12-12  4:55     ` Raymond Yau
2014-12-12 15:28       ` Pierre-Louis Bossart
2014-12-14  3:34         ` Raymond Yau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hsignmphw.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox