From: "Christian König" <ckoenig.leichtzumerken-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: "Yang, Philip" <Philip.Yang-5C7GfCeVMHo@public.gmane.org>,
"Deucher,
Alexander" <Alexander.Deucher-5C7GfCeVMHo@public.gmane.org>,
"amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
Subject: Re: [PATCH 3/3] drm/amdgpu: enable paging queue based on FW version
Date: Tue, 20 Nov 2018 10:58:21 +0100 [thread overview]
Message-ID: <0195565f-3dcb-341d-662e-9e2582938a99@gmail.com> (raw)
In-Reply-To: <f9918fbe-7cab-e8ce-0ecb-a53d1ba5f0c0-5C7GfCeVMHo@public.gmane.org>
Am 19.11.18 um 22:16 schrieb Yang, Philip:
> On 2018-11-19 3:57 p.m., Deucher, Alexander wrote:
>>> -----Original Message-----
>>> From: amd-gfx <amd-gfx-bounces@lists.freedesktop.org> On Behalf Of
>>> Yang, Philip
>>> Sent: Monday, November 19, 2018 3:20 PM
>>> To: amd-gfx@lists.freedesktop.org
>>> Cc: Yang, Philip <Philip.Yang@amd.com>
>>> Subject: [PATCH 3/3] drm/amdgpu: enable paging queue based on FW
>>> version
>>>
>>> Based SDMA fw version to enable has_page_queue support. Have to move
>>> sdma_v4_0_init_microcode from sw_init to early_init, to load firmware and
>>> init fw_version before set_ring/buffer/vm_pte_funcs use it.
>>>
>>> Change-Id: Ife5d4659d28bc2a7012b48947b27e929749d87c1
>>> Signed-off-by: Philip Yang <Philip.Yang@amd.com>
>>> ---
>>> drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 46 +++++++++++++++++----
>>> -----
>>> 1 file changed, 30 insertions(+), 16 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
>>> b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
>>> index 4d873fd3242c..0a3b68dd49a0 100644
>>> --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
>>> +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
>>> @@ -1447,23 +1447,44 @@ static void
>>> sdma_v4_0_ring_emit_reg_wait(struct amdgpu_ring *ring, uint32_t reg,
>>> sdma_v4_0_wait_reg_mem(ring, 0, 0, reg, 0, val, mask, 10); }
>>>
>>> +static bool sdma_v4_0_fw_support_paging_queue(struct amdgpu_device
>>> +*adev) {
>>> + uint fw_version = adev->sdma.instance[0].fw_version;
>>> +
>>> + switch (adev->asic_type) {
>>> + case CHIP_VEGA10:
>>> + return fw_version >= 430;
>>> + case CHIP_VEGA12:
>>> + return fw_version >= 31;
>>> + case CHIP_VEGA20:
>>> + return fw_version >= 115;
>>> + default:
>>> + return false;
>>> + }
>>> +}
>>> +
>>> static int sdma_v4_0_early_init(void *handle) {
>>> struct amdgpu_device *adev = (struct amdgpu_device *)handle;
>>> + int r;
>>>
>>> - if (adev->asic_type == CHIP_RAVEN) {
>>> + if (adev->asic_type == CHIP_RAVEN)
>>> adev->sdma.num_instances = 1;
>>> - adev->sdma.has_page_queue = false;
>>> - } else {
>>> + else
>>> adev->sdma.num_instances = 2;
>>> - /* TODO: Page queue breaks driver reload under SRIOV */
>>> - if ((adev->asic_type == CHIP_VEGA10) &&
>>> amdgpu_sriov_vf((adev)))
>>> - adev->sdma.has_page_queue = false;
>>> - else if (adev->asic_type != CHIP_VEGA20 &&
>>> - adev->asic_type != CHIP_VEGA12)
>>> - adev->sdma.has_page_queue = true;
>>> +
>>> + r = sdma_v4_0_init_microcode(adev);
>>> + if (r) {
>>> + DRM_ERROR("Failed to load sdma firmware!\n");
>>> + return r;
>> I think this should be ok. As long as you've verified that sdam_v4_0_init_microcode() doesn't depend on any other init from another module like psp. I took a quick look at the code and it seems like we should be ok.
>> Acked-by: Alex Deucher <alexander.deucher@amd.com>
> sdma_v4_0_init_microcode() reads fw binary file and setup fw version etc
> data structure. It doesn't depend on other init so it is fine to move it
> from sw_init() to early_init(). sdma_v4_0_load_microcode() will start fw
> from sdma_v4_0_start() which depends on psp, gmc etc. This happens after
> early_init()->sw_init()->hw_init().
Yeah, that sounds like it should work.
Patches #1 and #2 are Reviewed-by: Christian König
<christian.koenig@amd.com>
Patch #3 is Acked-by: Christian König <christian.koenig@amd.com>
Thanks for taking care of that,
Christian.
>
> Philip
>>> }
>>>
>>> + /* TODO: Page queue breaks driver reload under SRIOV */
>>> + if ((adev->asic_type == CHIP_VEGA10) &&
>>> amdgpu_sriov_vf((adev)))
>>> + adev->sdma.has_page_queue = false;
>>> + else if (sdma_v4_0_fw_support_paging_queue(adev))
>>> + adev->sdma.has_page_queue = true;
>>> +
>>> sdma_v4_0_set_ring_funcs(adev);
>>> sdma_v4_0_set_buffer_funcs(adev);
>>> sdma_v4_0_set_vm_pte_funcs(adev);
>>> @@ -1472,7 +1493,6 @@ static int sdma_v4_0_early_init(void *handle)
>>> return 0;
>>> }
>>>
>>> -
>>> static int sdma_v4_0_sw_init(void *handle) {
>>> struct amdgpu_ring *ring;
>>> @@ -1491,12 +1511,6 @@ static int sdma_v4_0_sw_init(void *handle)
>>> if (r)
>>> return r;
>>>
>>> - r = sdma_v4_0_init_microcode(adev);
>>> - if (r) {
>>> - DRM_ERROR("Failed to load sdma firmware!\n");
>>> - return r;
>>> - }
>>> -
>>> for (i = 0; i < adev->sdma.num_instances; i++) {
>>> ring = &adev->sdma.instance[i].ring;
>>> ring->ring_obj = NULL;
>>> --
>>> 2.17.1
>>>
>>> _______________________________________________
>>> amd-gfx mailing list
>>> amd-gfx@lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next prev parent reply other threads:[~2018-11-20 9:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-19 20:20 [PATCH 1/3] drm/amdgpu: fix typo in function sdma_v4_0_page_resume Yang, Philip
[not found] ` <20181119201946.5354-1-Philip.Yang-5C7GfCeVMHo@public.gmane.org>
2018-11-19 20:20 ` [PATCH 2/3] drm/amdgpu: enable paging queue doorbell support v4 Yang, Philip
[not found] ` <20181119201946.5354-2-Philip.Yang-5C7GfCeVMHo@public.gmane.org>
2018-11-19 20:49 ` Deucher, Alexander
2018-11-19 20:20 ` [PATCH 3/3] drm/amdgpu: enable paging queue based on FW version Yang, Philip
[not found] ` <20181119201946.5354-3-Philip.Yang-5C7GfCeVMHo@public.gmane.org>
2018-11-19 20:57 ` Deucher, Alexander
[not found] ` <BN6PR12MB18091E4BBC1BB24609AF383EF7D80-/b2+HYfkarSEx6ez0IUAagdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2018-11-19 21:16 ` Yang, Philip
[not found] ` <f9918fbe-7cab-e8ce-0ecb-a53d1ba5f0c0-5C7GfCeVMHo@public.gmane.org>
2018-11-20 9:58 ` Christian König [this message]
2018-11-19 20:49 ` [PATCH 1/3] drm/amdgpu: fix typo in function sdma_v4_0_page_resume Deucher, Alexander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0195565f-3dcb-341d-662e-9e2582938a99@gmail.com \
--to=ckoenig.leichtzumerken-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=Alexander.Deucher-5C7GfCeVMHo@public.gmane.org \
--cc=Philip.Yang-5C7GfCeVMHo@public.gmane.org \
--cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=christian.koenig-5C7GfCeVMHo@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).