From: James Zhu <jamesz-5C7GfCeVMHo@public.gmane.org>
To: Alex Deucher
<alexdeucher-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Zhu, James" <James.Zhu-5C7GfCeVMHo@public.gmane.org>
Cc: "Shamis, Leonid" <Leonid.Shamis-5C7GfCeVMHo@public.gmane.org>,
"Gabra, Maroun" <Maroun.Gabra-5C7GfCeVMHo@public.gmane.org>,
"amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>,
"Liu, Shaoyun" <Shaoyun.Liu-5C7GfCeVMHo@public.gmane.org>
Subject: Re: [PATCH] drm/amdgpu: Add GDS clearing workaround in later init for gfx9
Date: Fri, 7 Jun 2019 19:12:57 +0000 [thread overview]
Message-ID: <19203faa-970e-732b-a0e0-d2d1fe69ce30@amd.com> (raw)
In-Reply-To: <CADnq5_NBWcUtXsBbQP5uBvaOFgWXw3Lhj=ZOisVyTctqZph=xQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 2019-06-07 2:16 p.m., Alex Deucher wrote:
> On Fri, Jun 7, 2019 at 12:38 PM Zhu, James <James.Zhu@amd.com> wrote:
>> Since Hardware bug, GDS exist ECC error after cold boot up,
>> adding GDS clearing workaround in later init for gfx9.
>>
>> Signed-off-by: James Zhu <James.Zhu@amd.com>
>> ---
>> drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 48 +++++++++++++++++++++++++++++++++++
>> 1 file changed, 48 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
>> index 76722fc..81f6ba8 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
>> @@ -3634,6 +3634,50 @@ static const struct soc15_reg_entry sec_ded_counter_registers[] = {
>> { SOC15_REG_ENTRY(GC, 0, mmSQC_EDC_CNT3), 0, 4, 6},
>> };
>>
>> +
>> +static int gfx_v9_0_do_edc_gds_workarounds(struct amdgpu_device *adev)
>> +{
>> + struct amdgpu_ring *ring = &adev->gfx.compute_ring[0];
>> + int r;
>> +
>> + r = amdgpu_ring_alloc(ring, 17);
>> + if (r) {
>> + DRM_ERROR("amdgpu: GDS workarounds failed to lock ring %s (%d).\n",
>> + ring->name, r);
>> + return r;
>> + }
>> +
>> + amdgpu_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
>> + amdgpu_ring_write(ring, WRITE_DATA_ENGINE_SEL(0) |
>> + WRITE_DATA_DST_SEL(0));
>> + amdgpu_ring_write(ring, SOC15_REG_OFFSET(GC, 0, mmGDS_VMID0_SIZE));
>> + amdgpu_ring_write(ring, 0);
>> + amdgpu_ring_write(ring, 0x10000);
> hardcoded size, please use the size from the driver.
>
>> +
>> + amdgpu_ring_write(ring, PACKET3(PACKET3_DMA_DATA, 5));
>> + amdgpu_ring_write(ring, (PACKET3_DMA_DATA_CP_SYNC |
>> + PACKET3_DMA_DATA_DST_SEL(1) |
>> + PACKET3_DMA_DATA_SRC_SEL(2) |
>> + PACKET3_DMA_DATA_ENGINE(0)));
>> + amdgpu_ring_write(ring, 0);
>> + amdgpu_ring_write(ring, 0);
>> + amdgpu_ring_write(ring, 0);
>> + amdgpu_ring_write(ring, 0);
>> + amdgpu_ring_write(ring, PACKET3_DMA_DATA_CMD_RAW_WAIT | 0x10000);
> Instead of hardcoding the size, can you use the gds size from the
> driver (adev->gds.gds_size).
Hi Alex,
Do you mean adev->gds.mem.total_size?
But I see below operation in gfx_v9_0_ngg_init.
adev->gds.mem.total_size -= ....
Or you want me to add gds_size in struct amdgpu_gds?
James
>
> With that fixed:
> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
>
>> +
>> + amdgpu_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
>> + amdgpu_ring_write(ring, WRITE_DATA_ENGINE_SEL(0) |
>> + WRITE_DATA_DST_SEL(0));
>> + amdgpu_ring_write(ring, SOC15_REG_OFFSET(GC, 0, mmGDS_VMID0_SIZE));
>> + amdgpu_ring_write(ring, 0);
>> + amdgpu_ring_write(ring, 0x0);
>> +
>> + amdgpu_ring_commit(ring);
>> +
>> + return 0;
>> +}
>> +
>> +
>> static int gfx_v9_0_do_edc_gpr_workarounds(struct amdgpu_device *adev)
>> {
>> struct amdgpu_ring *ring = &adev->gfx.compute_ring[0];
>> @@ -3810,6 +3854,10 @@ static int gfx_v9_0_ecc_late_init(void *handle)
>> return 0;
>> }
>>
>> + r = gfx_v9_0_do_edc_gds_workarounds(adev);
>> + if (r)
>> + return r;
>> +
>> /* requires IBs so do in late init after IB pool is initialized */
>> r = gfx_v9_0_do_edc_gpr_workarounds(adev);
>> if (r)
>> --
>> 2.7.4
>>
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next prev parent reply other threads:[~2019-06-07 19:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-07 16:38 [PATCH] drm/amdgpu: Add GDS clearing workaround in later init for gfx9 Zhu, James
[not found] ` <1559925472-20077-1-git-send-email-James.Zhu-5C7GfCeVMHo@public.gmane.org>
2019-06-07 18:16 ` Alex Deucher
[not found] ` <CADnq5_NBWcUtXsBbQP5uBvaOFgWXw3Lhj=ZOisVyTctqZph=xQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-06-07 19:12 ` James Zhu [this message]
[not found] ` <19203faa-970e-732b-a0e0-d2d1fe69ce30-5C7GfCeVMHo@public.gmane.org>
2019-06-07 19:42 ` James Zhu
[not found] ` <65266293-ac7a-c3ef-752b-1691299b1f28-5C7GfCeVMHo@public.gmane.org>
2019-06-07 20:16 ` Shamis, Leonid
[not found] ` <3598A781-7AF5-4DDE-83AE-8835E85573D3-5C7GfCeVMHo@public.gmane.org>
2019-06-08 12:50 ` Christian König
[not found] ` <3ab2a128-3433-0e45-b555-2aff0892f8e6-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-06-10 14:21 ` James Zhu
2019-06-10 14:16 ` James Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19203faa-970e-732b-a0e0-d2d1fe69ce30@amd.com \
--to=jamesz-5c7gfcevmho@public.gmane.org \
--cc=James.Zhu-5C7GfCeVMHo@public.gmane.org \
--cc=Leonid.Shamis-5C7GfCeVMHo@public.gmane.org \
--cc=Maroun.Gabra-5C7GfCeVMHo@public.gmane.org \
--cc=Shaoyun.Liu-5C7GfCeVMHo@public.gmane.org \
--cc=alexdeucher-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox