public inbox for amd-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: nicolai.haehnle@amd.com, michel@daenzer.net,
	amd-gfx@lists.freedesktop.org, Christian.Koenig@amd.com,
	manasi.d.navare@intel.com, dri-devel@lists.freedesktop.org,
	Alexander.Deucher@amd.com, Marek.Olsak@amd.com
Subject: Re: [PATCH v2 1/3] drm: Add variable refresh rate properties to connector
Date: Mon, 24 Sep 2018 21:32:11 +0300	[thread overview]
Message-ID: <20180924183211.GW5565@intel.com> (raw)
In-Reply-To: <20180924181537.12092-2-nicholas.kazlauskas@amd.com>

On Mon, Sep 24, 2018 at 02:15:35PM -0400, Nicholas Kazlauskas wrote:
> Modern display hardware is capable of supporting variable refresh rates
> and adaptive sync technologies. The properties for querying and
> controlling these features should be exposed on the DRM connector.
> 
> This patch introduces two new properties for variable refresh rate
> support:
> 
> - variable_refresh_capable
> - variable_refresh_enabled
> 
> These are optional properties that can be added to a DRM connector
> dynamically by using drm_connector_attach_variable_refresh_properties.
> 
> DRM drivers should set variable_refresh_capable as applicable for
> their hardware. The property variable_refresh_enabled is a userspace
> controlled option.
> 
> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
> ---
>  drivers/gpu/drm/drm_atomic_uapi.c |  6 ++++++
>  drivers/gpu/drm/drm_connector.c   | 35 +++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h       | 27 ++++++++++++++++++++++++
>  3 files changed, 68 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index d5b7f315098c..0bb27a24a55c 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -723,6 +723,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
>  		state->content_type = val;
>  	} else if (property == connector->scaling_mode_property) {
>  		state->scaling_mode = val;
> +	} else if (property == connector->variable_refresh_enabled_property) {
> +		state->variable_refresh_enabled = val;
>  	} else if (property == connector->content_protection_property) {
>  		if (val == DRM_MODE_CONTENT_PROTECTION_ENABLED) {
>  			DRM_DEBUG_KMS("only drivers can set CP Enabled\n");
> @@ -797,6 +799,10 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
>  		*val = state->content_type;
>  	} else if (property == connector->scaling_mode_property) {
>  		*val = state->scaling_mode;
> +	} else if (property == connector->variable_refresh_capable_property) {
> +		*val = state->variable_refresh_capable;

Immutable props don't take this path. See
__drm_object_property_get_value().

> +	} else if (property == connector->variable_refresh_enabled_property) {
> +		*val = state->variable_refresh_enabled;
>  	} else if (property == connector->content_protection_property) {
>  		*val = state->content_protection;
>  	} else if (property == config->writeback_fb_id_property) {
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 1e40e5decbe9..fc1732639bd3 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1254,6 +1254,41 @@ int drm_mode_create_scaling_mode_property(struct drm_device *dev)
>  }
>  EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
>  
> +/**
> + * drm_connector_attach_variable_refresh_properties - creates and attaches
> + * properties for connectors that support adaptive refresh
> + * @connector: connector to create adaptive refresh properties on
> + */
> +int drm_connector_attach_variable_refresh_properties(
> +	struct drm_connector *connector)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct drm_property *prop;
> +
> +	if (!connector->variable_refresh_capable_property) {
> +		prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE,
> +			"variable_refresh_capable");
> +		if (!prop)
> +			return -ENOMEM;
> +
> +		connector->variable_refresh_capable_property = prop;
> +		drm_object_attach_property(&connector->base, prop, 0);
> +	}
> +
> +	if (!connector->variable_refresh_enabled_property) {
> +		prop = drm_property_create_bool(dev, 0,
> +			"variable_refresh_enabled");
> +		if (!prop)
> +			return -ENOMEM;
> +
> +		connector->variable_refresh_enabled_property = prop;
> +		drm_object_attach_property(&connector->base, prop, 0);
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_attach_variable_refresh_properties);
> +
>  /**
>   * drm_connector_attach_scaling_mode_property - attach atomic scaling mode property
>   * @connector: connector to attach scaling mode property on.
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 91a877fa00cb..e2c26842bd50 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -449,6 +449,18 @@ struct drm_connector_state {
>  	 */
>  	unsigned int content_protection;
>  
> +	/**
> +	 * @variable_refresh_enabled: Connector property used to check
> +	 * if variable refresh is supported on the device.
> +	 */
> +	bool variable_refresh_capable;
> +
> +	/**
> +	 * @variable_refresh_enabled: Connector property used to check
> +	 * if variable refresh is enabled.
> +	 */
> +	bool variable_refresh_enabled;
> +
>  	/**
>  	 * @writeback_job: Writeback job for writeback connectors
>  	 *
> @@ -910,6 +922,19 @@ struct drm_connector {
>  	 */
>  	struct drm_property *scaling_mode_property;
>  
> +	/**
> +	 * @variable_refresh_capable_property: Optional property for
> +	 * querying hardware support for variable refresh.
> +	 */
> +	struct drm_property *variable_refresh_capable_property;
> +
> +	/**
> +	 * @variable_refresh_enabled_property: Optional property for
> +	 * enabling or disabling support for variable refresh
> +	 * on the connector.
> +	 */
> +	struct drm_property *variable_refresh_enabled_property;
> +
>  	/**
>  	 * @content_protection_property: DRM ENUM property for content
>  	 * protection. See drm_connector_attach_content_protection_property().
> @@ -1183,6 +1208,8 @@ int drm_mode_create_scaling_mode_property(struct drm_device *dev);
>  int drm_connector_attach_content_type_property(struct drm_connector *dev);
>  int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
>  					       u32 scaling_mode_mask);
> +int drm_connector_attach_variable_refresh_properties(
> +	struct drm_connector *connector);
>  int drm_connector_attach_content_protection_property(
>  		struct drm_connector *connector);
>  int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
> -- 
> 2.19.0

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-09-24 18:32 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-24 18:15 [PATCH v2 0/3] A DRM API for adaptive sync and variable refresh rate support Nicholas Kazlauskas
2018-09-24 18:15 ` [PATCH v2 2/3] drm: Add variable refresh property to DRM CRTC Nicholas Kazlauskas
2018-09-24 18:38   ` Ville Syrjälä
2018-09-24 19:06     ` Kazlauskas, Nicholas
     [not found]       ` <4aa1583c-2be0-8cec-2857-6c3e489965b4-5C7GfCeVMHo@public.gmane.org>
2018-09-24 20:26         ` Ville Syrjälä
     [not found]           ` <20180924202655.GA9144-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2018-09-25 13:28             ` Michel Dänzer
     [not found]               ` <2158aa72-9156-5592-822a-c815f373fd53-otUistvHUpPR7s880joybQ@public.gmane.org>
2018-09-25 14:04                 ` Ville Syrjälä
     [not found]                   ` <20180925140433.GH9144-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2018-09-25 14:35                     ` Michel Dänzer
2018-09-25 15:28                       ` Ville Syrjälä
     [not found]                         ` <20180925152817.GK9144-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2018-10-01  7:10                           ` Daniel Vetter
2018-09-25 13:51             ` Kazlauskas, Nicholas
2018-10-05  8:10               ` Pekka Paalanen
2018-10-05 16:21                 ` Kazlauskas, Nicholas
     [not found]                   ` <fdc195dd-9650-8194-3a16-393f61bb2eee-5C7GfCeVMHo@public.gmane.org>
2018-10-05 16:56                     ` Michel Dänzer
2018-10-05 17:48                       ` Kazlauskas, Nicholas
2018-10-08 10:57                         ` Michel Dänzer
2018-10-10  7:14                     ` Pekka Paalanen
2018-10-10 13:35                       ` Kazlauskas, Nicholas
     [not found]                         ` <3bb5e05d-f7e6-8e44-cfae-202191d64245-5C7GfCeVMHo@public.gmane.org>
2018-10-12  7:23                           ` Pekka Paalanen
2018-10-12  7:35                             ` Koenig, Christian
     [not found]                               ` <894d12d3-aa0b-c0f6-6347-7d13e58e651a-5C7GfCeVMHo@public.gmane.org>
2018-10-12  9:21                                 ` Pekka Paalanen
2018-10-12 11:20                                   ` Koenig, Christian
2018-10-12 12:58                                     ` Kazlauskas, Nicholas
2018-10-15 13:57                                       ` Pekka Paalanen
2018-10-15 16:02                                         ` Kazlauskas, Nicholas
     [not found]                                           ` <52103366-510d-15a6-61d2-26196a4f0e57-5C7GfCeVMHo@public.gmane.org>
2018-10-16  7:36                                             ` Pekka Paalanen
     [not found] ` <20180924181537.12092-1-nicholas.kazlauskas-5C7GfCeVMHo@public.gmane.org>
2018-09-24 18:15   ` [PATCH v2 1/3] drm: Add variable refresh rate properties to connector Nicholas Kazlauskas
2018-09-24 18:32     ` Ville Syrjälä [this message]
2018-10-01  7:05       ` Daniel Vetter
2018-09-24 18:15   ` [PATCH v2 3/3] drm/amd/display: Set FreeSync state using DRM VRR properties Nicholas Kazlauskas
2018-10-01  7:15 ` [PATCH v2 0/3] A DRM API for adaptive sync and variable refresh rate support Daniel Vetter
2018-10-02 14:49   ` Harry Wentland
2018-10-03  8:41     ` Daniel Vetter
     [not found]       ` <20181003084120.GP11082-dv86pmgwkMBes7Z6vYuT8azUEOm+Xw19@public.gmane.org>
2018-10-03 18:35         ` Manasi Navare
2018-10-11 19:37           ` Harry Wentland
2018-10-11 19:41         ` Harry Wentland
2018-10-03  8:25   ` Mike Lothian
     [not found]     ` <CAHbf0-HhjG2xc1sAjHBR=Ep11LzumO6tdyzBcKSZ8h82H28Zbg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-10-11 19:44       ` Harry Wentland
2018-10-12  8:26         ` Michel Dänzer
     [not found]           ` <ac5b5865-6bb0-08e8-d83c-26893e75b11e-otUistvHUpPR7s880joybQ@public.gmane.org>
2018-10-12  8:31             ` Koenig, Christian
     [not found]               ` <84c4a243-ca2c-49a7-9e2c-22666292aea9-5C7GfCeVMHo@public.gmane.org>
2018-10-25 17:57                 ` Wentland, Harry
     [not found]                   ` <1c3d19a7-3afa-6de5-59e0-37a19d73848b-5C7GfCeVMHo@public.gmane.org>
2018-10-26  9:33                     ` Michel Dänzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180924183211.GW5565@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=Alexander.Deucher@amd.com \
    --cc=Christian.Koenig@amd.com \
    --cc=Marek.Olsak@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=manasi.d.navare@intel.com \
    --cc=michel@daenzer.net \
    --cc=nicholas.kazlauskas@amd.com \
    --cc=nicolai.haehnle@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox