AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Olšák" <maraeo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [PATCH 2/3] drm/amdgpu: increase the size of HQD EOP buffers
Date: Fri,  5 Oct 2018 17:01:43 -0400	[thread overview]
Message-ID: <20181005210144.13999-2-maraeo@gmail.com> (raw)
In-Reply-To: <20181005210144.13999-1-maraeo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Marek Olšák <marek.olsak@amd.com>

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 77e05c19022a..191feafc3b60 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -47,21 +47,21 @@
 #include "gca/gfx_8_0_enum.h"
 
 #include "dce/dce_10_0_d.h"
 #include "dce/dce_10_0_sh_mask.h"
 
 #include "smu/smu_7_1_3_d.h"
 
 #include "ivsrcid/ivsrcid_vislands30.h"
 
 #define GFX8_NUM_GFX_RINGS     1
-#define GFX8_MEC_HPD_SIZE 2048
+#define GFX8_MEC_HPD_SIZE 4096
 
 #define TOPAZ_GB_ADDR_CONFIG_GOLDEN 0x22010001
 #define CARRIZO_GB_ADDR_CONFIG_GOLDEN 0x22010001
 #define POLARIS11_GB_ADDR_CONFIG_GOLDEN 0x22011002
 #define TONGA_GB_ADDR_CONFIG_GOLDEN 0x22011003
 
 #define ARRAY_MODE(x)					((x) << GB_TILE_MODE0__ARRAY_MODE__SHIFT)
 #define PIPE_CONFIG(x)					((x) << GB_TILE_MODE0__PIPE_CONFIG__SHIFT)
 #define TILE_SPLIT(x)					((x) << GB_TILE_MODE0__TILE_SPLIT__SHIFT)
 #define MICRO_TILE_MODE_NEW(x)				((x) << GB_TILE_MODE0__MICRO_TILE_MODE_NEW__SHIFT)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 4b020cc4bea9..a9d3d6a3fb41 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -34,21 +34,21 @@
 #include "vega10_enum.h"
 #include "hdp/hdp_4_0_offset.h"
 
 #include "soc15_common.h"
 #include "clearstate_gfx9.h"
 #include "v9_structs.h"
 
 #include "ivsrcid/gfx/irqsrcs_gfx_9_0.h"
 
 #define GFX9_NUM_GFX_RINGS     1
-#define GFX9_MEC_HPD_SIZE 2048
+#define GFX9_MEC_HPD_SIZE 4096
 #define RLCG_UCODE_LOADING_START_ADDRESS 0x00002000L
 #define RLC_SAVE_RESTORE_ADDR_STARTING_OFFSET 0x00000000L
 
 #define mmPWR_MISC_CNTL_STATUS					0x0183
 #define mmPWR_MISC_CNTL_STATUS_BASE_IDX				0
 #define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN__SHIFT	0x0
 #define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS__SHIFT		0x1
 #define PWR_MISC_CNTL_STATUS__PWR_GFX_RLC_CGPG_EN_MASK		0x00000001L
 #define PWR_MISC_CNTL_STATUS__PWR_GFXOFF_STATUS_MASK		0x00000006L
 
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  parent reply	other threads:[~2018-10-05 21:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-05 21:01 [PATCH 1/3] drm/amdgpu: set GTT_USWC on reserved VRAM allocations Marek Olšák
     [not found] ` <20181005210144.13999-1-maraeo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-10-05 21:01   ` Marek Olšák [this message]
     [not found]     ` <20181005210144.13999-2-maraeo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-10-09 16:17       ` [PATCH 2/3] drm/amdgpu: increase the size of HQD EOP buffers Alex Deucher
     [not found]         ` <CADnq5_M-uz+ABbZpm1-SFS26f1Q8T-w00FwXiMxj9HeAx8PhQw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-10-18 19:46           ` Marek Olšák
2018-10-18 19:57             ` Alex Deucher
2018-10-05 21:01   ` [PATCH 3/3] drm/amdgpu: put HQD EOP buffers into VRAM Marek Olšák
     [not found]     ` <20181005210144.13999-3-maraeo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-10-09 16:18       ` Alex Deucher
2018-10-06 11:44   ` [PATCH 1/3] drm/amdgpu: set GTT_USWC on reserved VRAM allocations Christian König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181005210144.13999-2-maraeo@gmail.com \
    --to=maraeo-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox