AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Christian König" <ckoenig.leichtzumerken-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [PATCH 4/8] drm/amdgpu: remove non gfx specific handling from sdma_v4_0_gfx_resume
Date: Mon,  8 Oct 2018 15:35:17 +0200	[thread overview]
Message-ID: <20181008133521.3237-4-christian.koenig@amd.com> (raw)
In-Reply-To: <20181008133521.3237-1-christian.koenig-5C7GfCeVMHo@public.gmane.org>

Needed to start using the paging queue.

Signed-off-by: Christian König <christian.koenig@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 36 +++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index 5ecf6c9252c4..1124b45d166d 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -686,13 +686,10 @@ static void sdma_v4_0_gfx_resume(struct amdgpu_device *adev, unsigned int i)
 	u32 wb_offset;
 	u32 doorbell;
 	u32 doorbell_offset;
-	u32 temp;
 	u64 wptr_gpu_addr;
 
 	wb_offset = (ring->rptr_offs * 4);
 
-	WREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_SEM_WAIT_FAIL_TIMER_CNTL), 0);
-
 	/* Set ring buffer size in dwords */
 	rb_bufsz = order_base_2(ring->ring_size / 4);
 	rb_cntl = RREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_GFX_RB_CNTL));
@@ -752,18 +749,6 @@ static void sdma_v4_0_gfx_resume(struct amdgpu_device *adev, unsigned int i)
 	/* set minor_ptr_update to 0 after wptr programed */
 	WREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_GFX_MINOR_PTR_UPDATE), 0);
 
-	/* set utc l1 enable flag always to 1 */
-	temp = RREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_CNTL));
-	temp = REG_SET_FIELD(temp, SDMA0_CNTL, UTC_L1_ENABLE, 1);
-	WREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_CNTL), temp);
-
-	if (!amdgpu_sriov_vf(adev)) {
-		/* unhalt engine */
-		temp = RREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_F32_CNTL));
-		temp = REG_SET_FIELD(temp, SDMA0_F32_CNTL, HALT, 0);
-		WREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_F32_CNTL), temp);
-	}
-
 	/* setup the wptr shadow polling */
 	wptr_gpu_addr = adev->wb.gpu_addr + (ring->wptr_offs * 4);
 	WREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_GFX_RB_WPTR_POLL_ADDR_LO),
@@ -942,9 +927,28 @@ static int sdma_v4_0_start(struct amdgpu_device *adev)
 	}
 
 	/* start the gfx rings and rlc compute queues */
-	for (i = 0; i < adev->sdma.num_instances; i++)
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+		uint32_t temp;
+
+		WREG32(sdma_v4_0_get_reg_offset(adev, i,
+				mmSDMA0_SEM_WAIT_FAIL_TIMER_CNTL), 0);
 		sdma_v4_0_gfx_resume(adev, i);
 
+		/* set utc l1 enable flag always to 1 */
+		temp = RREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_CNTL));
+		temp = REG_SET_FIELD(temp, SDMA0_CNTL, UTC_L1_ENABLE, 1);
+		WREG32(sdma_v4_0_get_reg_offset(adev, i, mmSDMA0_CNTL), temp);
+
+		if (!amdgpu_sriov_vf(adev)) {
+			/* unhalt engine */
+			temp = RREG32(sdma_v4_0_get_reg_offset(adev, i,
+					mmSDMA0_F32_CNTL));
+			temp = REG_SET_FIELD(temp, SDMA0_F32_CNTL, HALT, 0);
+			WREG32(sdma_v4_0_get_reg_offset(adev, i,
+					mmSDMA0_F32_CNTL), temp);
+		}
+	}
+
 	if (amdgpu_sriov_vf(adev)) {
 		sdma_v4_0_ctx_switch_enable(adev, true);
 		sdma_v4_0_enable(adev, true);
-- 
2.14.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  parent reply	other threads:[~2018-10-08 13:35 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08 13:35 [PATCH 1/8] drm/amdgpu: fix incorrect use of amdgpu_irq_add_id in si_dma.c Christian König
     [not found] ` <20181008133521.3237-1-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-08 13:35   ` [PATCH 2/8] drm/amdgpu: fix sdma v4 startup under SRIOV Christian König
     [not found]     ` <20181008133521.3237-2-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:17       ` Huang Rui
2018-10-09 10:56         ` Christian König
     [not found]           ` <5ae6a2fe-80d6-858e-dcd2-2d44ab0b76ce-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-10-09 11:45             ` Liu, Monk
     [not found]               ` <CY4PR1201MB024521C2A0EA4BAE7272EA6584E70-1iTaO6aE1DBfNQakwlCMTGrFom/aUZj6nBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2018-10-09 13:03                 ` Koenig, Christian
     [not found]                   ` <dbab4a65-d9ec-8ac7-75bb-86033de043f5-5C7GfCeVMHo@public.gmane.org>
2018-10-10  6:53                     ` Liu, Monk
     [not found]                       ` <CY4PR1201MB0245F26FFD7EE7558A7401B984E00-1iTaO6aE1DBfNQakwlCMTGrFom/aUZj6nBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2018-10-10  7:24                         ` Ma, Sigil
     [not found]                           ` <CY4PR12MB1351B3D0E5E5A75BFAF7F0D487E00-rpdhrqHFk04aRV2spazHLQdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2018-10-10  7:52                             ` Liu, Monk
     [not found]                               ` <CY4PR1201MB024507BB222336DFA92304C784E00-1iTaO6aE1DBfNQakwlCMTGrFom/aUZj6nBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2018-10-12 14:27                                 ` Koenig, Christian
     [not found]                                   ` <8d7c9d2e-6d4d-34d3-d8dc-102e253610f2-5C7GfCeVMHo@public.gmane.org>
2018-10-16 12:34                                     ` Christian König
     [not found]                                       ` <2512cfee-a603-75c4-bf10-9ae0b4b8c5c7-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-10-16 14:42                                         ` Huang Rui
2018-10-08 13:35   ` [PATCH 3/8] drm/amdgpu: add basics for SDMA page queue support Christian König
     [not found]     ` <20181008133521.3237-3-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:31       ` Huang Rui
2018-10-08 13:35   ` Christian König [this message]
     [not found]     ` <20181008133521.3237-4-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:34       ` [PATCH 4/8] drm/amdgpu: remove non gfx specific handling from sdma_v4_0_gfx_resume Huang Rui
2018-10-08 13:35   ` [PATCH 5/8] drm/amdgpu: remove SRIOV " Christian König
     [not found]     ` <20181008133521.3237-5-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:35       ` Huang Rui
2018-10-08 13:35   ` [PATCH 6/8] drm/amdgpu: add some [WR]REG32_SDMA macros to sdma_v4_0.c Christian König
     [not found]     ` <20181008133521.3237-6-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:36       ` Huang Rui
2018-10-08 13:35   ` [PATCH 7/8] drm/amdgpu: activate paging queue on SDMA v4 Christian König
     [not found]     ` <20181008133521.3237-7-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:40       ` Huang Rui
2018-10-08 13:35   ` [PATCH 8/8] drm/amdgpu: use paging queue for VM page table updates Christian König
     [not found]     ` <20181008133521.3237-8-christian.koenig-5C7GfCeVMHo@public.gmane.org>
2018-10-09  9:43       ` Huang Rui
2018-10-09  8:37   ` [PATCH 1/8] drm/amdgpu: fix incorrect use of amdgpu_irq_add_id in si_dma.c Huang Rui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181008133521.3237-4-christian.koenig@amd.com \
    --to=ckoenig.leichtzumerken-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox