[PATCH AUTOSEL 4.19 048/258] drm/amd/display: fix gamma not being applied correctly

[PATCH AUTOSEL 4.19 048/258] drm/amd/display: fix gamma not being applied correctly

[Sasha Levin]

From: Murton Liu <murton.liu@amd.com>

[ Upstream commit 8ce504b9389be846bcdf512ed5be8f661b3bf097 ]

[why]
Gamma was always being set as identity on SDR monitor,
leading to no changes in gamma. This caused nightlight to
not apply correctly.

[how]
Added a default gamma structure to compare against
in the sdr case.

Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index cfcc54f2ce65..33a9d0c58966 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1190,7 +1190,8 @@ static bool dcn10_set_input_transfer_func(struct pipe_ctx *pipe_ctx,
 		tf = plane_state->in_transfer_func;
 
 	if (plane_state->gamma_correction &&
-		!plane_state->gamma_correction->is_identity
+		!dpp_base->ctx->dc->debug.always_use_regamma
+		&& !plane_state->gamma_correction->is_identity
 			&& dce_use_lut(plane_state->format))
 		dpp_base->funcs->dpp_program_input_lut(dpp_base, plane_state->gamma_correction);
 
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 049/258] drm/amd/display: calculate stream->phy_pix_clk before clock mapping

[Sasha Levin]

From: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>

[ Upstream commit 08e1c28dd521c7b08d1b0af0bae9fb22ccc012a4 ]

[why]
phy_pix_clk is one of the variable used to check if one PLL can be shared
with displays having common mode set configuration. As of now
phy_pix_clock varialbe is calculated in function dc_validate_stream().
dc_validate_stream() function is called after clocks are assigned for the
new display. Due to this during hotplug, when PLL sharing conditions are
checked for new display phy_pix_clk variable will be 0 and for displays
that are already enabled phy_pix_clk will have some value. Hence PLL will
not be shared and if the display hardware doesn't have any more PLL to
assign, mode set will fail due to resource unavailability.

[how]
Instead of only calculating the phy_pix_clk variable after the PLL is
assigned for new display, this patch calculates phy_pix_clk also during
the before assigning the PLL for new display.

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index ea6beccfd89d..87bf422f16be 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -1917,6 +1917,8 @@ enum dc_status resource_map_pool_resources(
 		}
 	*/
 
+	calculate_phy_pix_clks(stream);
+
 	/* acquire new resources */
 	pipe_idx = acquire_first_free_pipe(&context->res_ctx, pool, stream);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 109/258] drm/amdgpu/powerplay: fix clock stretcher limits on polaris (v2)

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit de4aaab5cc9770a8c4dc13d9bfb6a83b06bba57e ]

Adjust limits for newer polaris variants.

v2: fix polaris11 kicker (Jerry)

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/powerplay/smumgr/polaris10_smumgr.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c
index 5b67f575cd34..45629f26dbc2 100644
--- a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smumgr.c
@@ -1528,8 +1528,21 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr)
 	efuse = efuse >> 24;
 
 	if (hwmgr->chip_id == CHIP_POLARIS10) {
-		min = 1000;
-		max = 2300;
+		if (hwmgr->is_kicker) {
+			min = 1200;
+			max = 2500;
+		} else {
+			min = 1000;
+			max = 2300;
+		}
+	} else if (hwmgr->chip_id == CHIP_POLARIS11) {
+		if (hwmgr->is_kicker) {
+			min = 900;
+			max = 2100;
+		} else {
+			min = 1100;
+			max = 2100;
+		}
 	} else {
 		min = 1100;
 		max = 2100;
-- 
2.19.1

[PATCH AUTOSEL 4.19 183/258] drm/amd/display: Add retry to read ddc_clock pin

[Sasha Levin]

From: Paul Hsieh <paul.hsieh@amd.com>

[ Upstream commit bd4905a9583c760da31ded7256dca6f71483c3dc ]

[WHY]
On customer board, there is one pluse (1v , < 1ms) on
DDC_CLK pin when plug / unplug DP cable. Driver will read
it and config DP to HDMI/DVI dongle.

[HOW]
If there is a real dongle, DDC_CLK should be always pull high.
Try to read again to recovery this special case. Retry times = 3.
Need additional 3ms to detect DP passive dongle(3 failures)

Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 23 ++++++++++++++-----
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 7c89785fd731..23a7ef97afdd 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -324,7 +324,7 @@ bool dc_link_is_dp_sink_present(struct dc_link *link)
 {
 	enum gpio_result gpio_result;
 	uint32_t clock_pin = 0;
-
+	uint8_t retry = 0;
 	struct ddc *ddc;
 
 	enum connector_id connector_id =
@@ -353,11 +353,22 @@ bool dc_link_is_dp_sink_present(struct dc_link *link)
 		return present;
 	}
 
-	/* Read GPIO: DP sink is present if both clock and data pins are zero */
-	/* [anaumov] in DAL2, there was no check for GPIO failure */
-
-	gpio_result = dal_gpio_get_value(ddc->pin_clock, &clock_pin);
-	ASSERT(gpio_result == GPIO_RESULT_OK);
+	/*
+	 * Read GPIO: DP sink is present if both clock and data pins are zero
+	 *
+	 * [W/A] plug-unplug DP cable, sometimes customer board has
+	 * one short pulse on clk_pin(1V, < 1ms). DP will be config to HDMI/DVI
+	 * then monitor can't br light up. Add retry 3 times
+	 * But in real passive dongle, it need additional 3ms to detect
+	 */
+	do {
+		gpio_result = dal_gpio_get_value(ddc->pin_clock, &clock_pin);
+		ASSERT(gpio_result == GPIO_RESULT_OK);
+		if (clock_pin)
+			udelay(1000);
+		else
+			break;
+	} while (retry++ < 3);
 
 	present = (gpio_result == GPIO_RESULT_OK) && !clock_pin;
 
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 185/258] drm/amd/display: fix YCbCr420 blank color

[Sasha Levin]

From: Eric Yang <Eric.Yang2@amd.com>

[ Upstream commit 12750d1647f118496f1da727146f255f5e44d500 ]

[Why]
YCbCr420 packing format uses two chanels for luma, and 1
channel for both chroma component. Our previous implementation
did not account for this and results in every other pixel having
very high luma value, showing greyish color instead of black.

YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> .....
YCbCr420 = <Y1, Y2,  Cb1>; <Y3, Y4,  Cr1> .....

[How]
Program the second channel with the black color value for luma
as well.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dce110/dce110_hw_sequencer.c   | 11 ++++++++++-
 .../gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c |  9 +++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 0941f3c689bc..580e7e82034f 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1268,10 +1268,19 @@ static void program_scaler(const struct dc *dc,
 		pipe_ctx->plane_res.scl_data.lb_params.depth,
 		&pipe_ctx->stream->bit_depth_params);
 
-	if (pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color)
+	if (pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color) {
+		/*
+		 * The way 420 is packed, 2 channels carry Y component, 1 channel
+		 * alternate between Cb and Cr, so both channels need the pixel
+		 * value for Y
+		 */
+		if (pipe_ctx->stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420)
+			color.color_r_cr = color.color_g_y;
+
 		pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color(
 				pipe_ctx->stream_res.tg,
 				&color);
+	}
 
 	pipe_ctx->plane_res.xfm->funcs->transform_set_scaler(pipe_ctx->plane_res.xfm,
 		&pipe_ctx->plane_res.scl_data);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 33a9d0c58966..4058b59d9bea 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -2121,6 +2121,15 @@ static void dcn10_blank_pixel_data(
 	color_space = stream->output_color_space;
 	color_space_to_black_color(dc, color_space, &black_color);
 
+	/*
+	 * The way 420 is packed, 2 channels carry Y component, 1 channel
+	 * alternate between Cb and Cr, so both channels need the pixel
+	 * value for Y
+	 */
+	if (stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420)
+		black_color.color_r_cr = black_color.color_g_y;
+
+
 	if (stream_res->tg->funcs->set_blank_color)
 		stream_res->tg->funcs->set_blank_color(
 				stream_res->tg,
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 203/258] drm/amd/display: validate extended dongle caps

[Sasha Levin]

From: Wenjing Liu <Wenjing.Liu@amd.com>

[ Upstream commit 99b922f9ed6a6313c0d2247cde8aa1e4a0bd67e4 ]

[why]
Some dongle doesn't have a valid extended dongle caps,
but we still set the extended dongle caps to be valid.
This causes validation fails for all timing.

[how]
If no dp_hdmi_max_pixel_clk is provided,
don't use extended dongle caps.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index a7553b6d59c2..05840f5bddd5 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2240,7 +2240,8 @@ static void get_active_converter_info(
 					translate_dpcd_max_bpc(
 						hdmi_color_caps.bits.MAX_BITS_PER_COLOR_COMPONENT);
 
-				link->dpcd_caps.dongle_caps.extendedCapValid = true;
+				if (link->dpcd_caps.dongle_caps.dp_hdmi_max_pixel_clk != 0)
+					link->dpcd_caps.dongle_caps.extendedCapValid = true;
 			}
 
 			break;
-- 
2.19.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx