AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: sunpeng.li-5C7GfCeVMHo@public.gmane.org
Cc: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH v2] drm/sysfs: Add mstpath attribute to connector devices
Date: Wed, 10 Jul 2019 13:07:19 +0300	[thread overview]
Message-ID: <20190710100719.GB5942@intel.com> (raw)
In-Reply-To: <20190705143220.11109-1-sunpeng.li-5C7GfCeVMHo@public.gmane.org>

On Fri, Jul 05, 2019 at 10:32:20AM -0400, sunpeng.li@amd.com wrote:
> From: Leo Li <sunpeng.li@amd.com>
> 
> This can be used to create more descriptive symlinks for MST aux
> devices. Consider the following udev rule:
> 
> SUBSYSTEM=="drm_dp_aux_dev", SUBSYSTEMS=="drm", ATTRS{mstpath}=="?*",
> 	SYMLINK+="drm_dp_aux/by-path/$attr{mstpath}"
> 
> The following symlinks will be created (depending on your MST topology):
> 
> $ ls /dev/drm_dp_aux/by-path/
> card0-mst:0-1  card0-mst:0-1-1  card0-mst:0-1-8  card0-mst:0-8
> 
> v2: remove unnecessary locking of mode_config.mutex
> 
> Signed-off-by: Leo Li <sunpeng.li@amd.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/drm_sysfs.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
> index ad10810bc972..7d483ab684a0 100644
> --- a/drivers/gpu/drm/drm_sysfs.c
> +++ b/drivers/gpu/drm/drm_sysfs.c
> @@ -236,16 +236,36 @@ static ssize_t modes_show(struct device *device,
>  	return written;
>  }
>  
> +static ssize_t mstpath_show(struct device *device,
> +			    struct device_attribute *attr,
> +			    char *buf)
> +{
> +	struct drm_connector *connector = to_drm_connector(device);
> +	ssize_t ret = 0;
> +	char *path;
> +
> +	if (!connector->path_blob_ptr)
> +		return ret;
> +
> +	path = connector->path_blob_ptr->data;
> +	ret = snprintf(buf, PAGE_SIZE, "card%d-%s\n",
> +		       connector->dev->primary->index, path);
> +
> +	return ret;
> +}
> +
>  static DEVICE_ATTR_RW(status);
>  static DEVICE_ATTR_RO(enabled);
>  static DEVICE_ATTR_RO(dpms);
>  static DEVICE_ATTR_RO(modes);
> +static DEVICE_ATTR_RO(mstpath);
>  
>  static struct attribute *connector_dev_attrs[] = {
>  	&dev_attr_status.attr,
>  	&dev_attr_enabled.attr,
>  	&dev_attr_dpms.attr,
>  	&dev_attr_modes.attr,
> +	&dev_attr_mstpath.attr,
>  	NULL
>  };
>  
> -- 
> 2.22.0

-- 
Ville Syrjälä
Intel
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  parent reply	other threads:[~2019-07-10 10:07 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-04 19:05 [PATCH 00/10] Enable MST Aux devices (v2) sunpeng.li-5C7GfCeVMHo
     [not found] ` <20190704190519.29525-1-sunpeng.li-5C7GfCeVMHo@public.gmane.org>
2019-07-04 19:05   ` [PATCH 01/10] drm/dp: Use non-cyclic idr sunpeng.li-5C7GfCeVMHo
2019-07-04 19:05   ` [PATCH 02/10] drm/dp_mst: Enable registration of AUX devices for MST ports (v2) sunpeng.li-5C7GfCeVMHo
     [not found]     ` <20190704190519.29525-3-sunpeng.li-5C7GfCeVMHo@public.gmane.org>
2019-07-10 19:51       ` Lyude Paul
2019-07-10 23:25     ` Lyude Paul
2019-07-04 19:05   ` [PATCH 04/10] drm/nouveau: Use connector kdev as aux device parent sunpeng.li-5C7GfCeVMHo
2019-07-12 19:55     ` Lyude Paul
2019-07-04 19:05   ` [PATCH 05/10] drm/bridge/analogix-anx78xx: " sunpeng.li-5C7GfCeVMHo
2019-07-04 19:05   ` [PATCH 06/10] drm/amd/display: " sunpeng.li-5C7GfCeVMHo
2019-07-04 19:05   ` [PATCH 07/10] drm/i915: Implement MST Aux device registration sunpeng.li-5C7GfCeVMHo
2019-07-10 10:06     ` Ville Syrjälä
2019-07-12 19:48     ` Lyude Paul
2019-07-12 20:05       ` Ville Syrjälä
     [not found]         ` <20190712200559.GN5942-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2019-07-12 20:15           ` Ville Syrjälä
2019-07-23 14:01             ` Li, Sun peng (Leo)
2019-07-04 19:05   ` [PATCH 08/10] drm/nouveau/kms/nv50: " sunpeng.li-5C7GfCeVMHo
2019-07-12 19:54     ` Lyude Paul
2019-07-04 19:05   ` [PATCH 09/10] drm/radeon: " sunpeng.li-5C7GfCeVMHo
2019-07-04 19:05   ` [PATCH 10/10] drm/amd/display: " sunpeng.li-5C7GfCeVMHo
2019-07-09 19:10   ` [PATCH 00/10] Enable MST Aux devices (v2) Li, Sun peng (Leo)
2019-07-04 19:05 ` [PATCH 03/10] drm/sysfs: Add mstpath attribute to connector devices sunpeng.li
     [not found]   ` <20190704190519.29525-4-sunpeng.li-5C7GfCeVMHo@public.gmane.org>
2019-07-04 19:33     ` Ville Syrjälä
2019-07-05 14:03       ` Li, Sun peng (Leo)
2019-07-05 14:32     ` [PATCH v2] " sunpeng.li-5C7GfCeVMHo
     [not found]       ` <20190705143220.11109-1-sunpeng.li-5C7GfCeVMHo@public.gmane.org>
2019-07-10 10:07         ` Ville Syrjälä [this message]
2019-07-10 22:50         ` Lyude Paul
     [not found]           ` <346980b73f3b1fbbc70cbf3771788cec0777d4c0.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2019-07-16 18:28             ` Li, Sun peng (Leo)
2019-07-16 20:28               ` Lyude Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190710100719.GB5942@intel.com \
    --to=ville.syrjala-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=sunpeng.li-5C7GfCeVMHo@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox