[PATCH AUTOSEL 4.19 010/101] drm/amd/display: Fill prescale_params->scale for RGB565

[PATCH AUTOSEL 4.19 010/101] drm/amd/display: Fill prescale_params->scale for RGB565

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 1352c779cb74d427f4150cbe779a2f7886f70cae ]

[Why]
An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565
formats on DCE since the prescale_params->scale wasn't being filled.

Found by a dmesg-fail when running the
igt@kms_plane@pixel-format-pipe-a-planes test on Baffin.

[How]
Fill in the scale parameter.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 53ccacf99eca..c3ad2bbec1a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -242,6 +242,9 @@ static void build_prescale_params(struct ipp_prescale_params *prescale_params,
 	prescale_params->mode = IPP_PRESCALE_MODE_FIXED_UNSIGNED;
 
 	switch (plane_state->format) {
+	case SURFACE_PIXEL_FORMAT_GRPH_RGB565:
+		prescale_params->scale = 0x2082;
+		break;
 	case SURFACE_PIXEL_FORMAT_GRPH_ARGB8888:
 	case SURFACE_PIXEL_FORMAT_GRPH_ABGR8888:
 		prescale_params->scale = 0x2020;
-- 
2.20.1

[PATCH AUTOSEL 4.19 011/101] drm/amdgpu/sriov: Need to initialize the HDP_NONSURFACE_BAStE

[Sasha Levin]

From: Tiecheng Zhou <Tiecheng.Zhou@amd.com>

[ Upstream commit fe2b5323d2c3cedaa3bf943dc7a0d233c853c914 ]

it requires to initialize HDP_NONSURFACE_BASE, so as to avoid
using the value left by a previous VM under sriov scenario.

v2: it should not hurt baremetal, generalize it for both sriov
and baremetal

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
index 72f8018fa2a8..ede27dab675f 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -1037,6 +1037,9 @@ static int gmc_v9_0_gart_enable(struct amdgpu_device *adev)
 	tmp = RREG32_SOC15(HDP, 0, mmHDP_HOST_PATH_CNTL);
 	WREG32_SOC15(HDP, 0, mmHDP_HOST_PATH_CNTL, tmp);
 
+	WREG32_SOC15(HDP, 0, mmHDP_NONSURFACE_BASE, (adev->gmc.vram_start >> 8));
+	WREG32_SOC15(HDP, 0, mmHDP_NONSURFACE_BASE_HI, (adev->gmc.vram_start >> 40));
+
 	/* After HDP is initialized, flush HDP.*/
 	adev->nbio_funcs->hdp_flush(adev, NULL);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 013/101] drm/amdkfd: Fix a potential memory leak

[Sasha Levin]

From: Oak Zeng <ozeng@amd.com>

[ Upstream commit e73390d181103a19e1111ec2f25559a0570e9fe0 ]

Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails.

Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c
index 0cedb37cf513..985bebde5a34 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c
@@ -75,6 +75,7 @@ static int init_mqd(struct mqd_manager *mm, void **mqd,
 	struct v9_mqd *m;
 	struct kfd_dev *kfd = mm->dev;
 
+	*mqd_mem_obj = NULL;
 	/* From V9,  for CWSR, the control stack is located on the next page
 	 * boundary after the mqd, we will use the gtt allocation function
 	 * instead of sub-allocation function.
@@ -92,8 +93,10 @@ static int init_mqd(struct mqd_manager *mm, void **mqd,
 	} else
 		retval = kfd_gtt_sa_allocate(mm->dev, sizeof(struct v9_mqd),
 				mqd_mem_obj);
-	if (retval != 0)
+	if (retval) {
+		kfree(*mqd_mem_obj);
 		return -ENOMEM;
+	}
 
 	m = (struct v9_mqd *) (*mqd_mem_obj)->cpu_ptr;
 	addr = (*mqd_mem_obj)->gpu_addr;
-- 
2.20.1

[PATCH AUTOSEL 4.19 012/101] drm/amd/display: Disable ABM before destroy ABM struct

[Sasha Levin]

From: Paul Hsieh <paul.hsieh@amd.com>

[ Upstream commit 1090d58d4815b1fcd95a80987391006c86398b4c ]

[Why]
When disable driver, OS will set backlight optimization
then do stop device.  But this flag will cause driver to
enable ABM when driver disabled.

[How]
Send ABM disable command before destroy ABM construct

Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce/dce_abm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
index 29294db1a96b..070ab56a8aca 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
@@ -474,6 +474,8 @@ void dce_abm_destroy(struct abm **abm)
 {
 	struct dce_abm *abm_dce = TO_DCE_ABM(*abm);
 
+	abm_dce->base.funcs->set_abm_immediate_disable(*abm);
+
 	kfree(abm_dce);
 	*abm = NULL;
 }
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 014/101] drm/amdkfd: Fix sdma queue map issue

[Sasha Levin]

From: Oak Zeng <Oak.Zeng@amd.com>

[ Upstream commit 065e4bdfa1f3ab2884c110394d8b7e7ebe3b988c ]

Previous codes assumes there are two sdma engines.
This is not true e.g., Raven only has 1 SDMA engine.
Fix the issue by using sdma engine number info in
device_info.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c | 21 +++++++++++--------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index 4f22e745df51..189212cb3547 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -1268,12 +1268,17 @@ int amdkfd_fence_wait_timeout(unsigned int *fence_addr,
 	return 0;
 }
 
-static int unmap_sdma_queues(struct device_queue_manager *dqm,
-				unsigned int sdma_engine)
+static int unmap_sdma_queues(struct device_queue_manager *dqm)
 {
-	return pm_send_unmap_queue(&dqm->packets, KFD_QUEUE_TYPE_SDMA,
-			KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0, false,
-			sdma_engine);
+	int i, retval = 0;
+
+	for (i = 0; i < dqm->dev->device_info->num_sdma_engines; i++) {
+		retval = pm_send_unmap_queue(&dqm->packets, KFD_QUEUE_TYPE_SDMA,
+			KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0, false, i);
+		if (retval)
+			return retval;
+	}
+	return retval;
 }
 
 /* dqm->lock mutex has to be locked before calling this function */
@@ -1312,10 +1317,8 @@ static int unmap_queues_cpsch(struct device_queue_manager *dqm,
 	pr_debug("Before destroying queues, sdma queue count is : %u\n",
 		dqm->sdma_queue_count);
 
-	if (dqm->sdma_queue_count > 0) {
-		unmap_sdma_queues(dqm, 0);
-		unmap_sdma_queues(dqm, 1);
-	}
+	if (dqm->sdma_queue_count > 0)
+		unmap_sdma_queues(dqm);
 
 	retval = pm_send_unmap_queue(&dqm->packets, KFD_QUEUE_TYPE_COMPUTE,
 			filter, filter_param, false, 0);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 026/101] drm/amd/display: Always allocate initial connector state state

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit f04bee34d6e35df26cbb2d65e801adfd0d8fe20d ]

[Why]
Unlike our regular connectors, MST connectors don't start off with
an initial connector state. This causes a NULL pointer dereference to
occur when attaching the bpc property since it tries to modify the
connector state.

We need an initial connector state on the connector to avoid the crash.

[How]
Use our reset helper to allocate an initial state and reset the values
to their defaults. We were already doing this before, just not for
MST connectors.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index dac7978f5ee1..221de241535a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -3644,6 +3644,13 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 {
 	struct amdgpu_device *adev = dm->ddev->dev_private;
 
+	/*
+	 * Some of the properties below require access to state, like bpc.
+	 * Allocate some default initial connector state with our reset helper.
+	 */
+	if (aconnector->base.funcs->reset)
+		aconnector->base.funcs->reset(&aconnector->base);
+
 	aconnector->connector_id = link_index;
 	aconnector->dc_link = link;
 	aconnector->base.interlace_allowed = false;
@@ -3811,9 +3818,6 @@ static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm,
 			&aconnector->base,
 			&amdgpu_dm_connector_helper_funcs);
 
-	if (aconnector->base.funcs->reset)
-		aconnector->base.funcs->reset(&aconnector->base);
-
 	amdgpu_dm_connector_init_helper(
 		dm,
 		aconnector,
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 029/101] drm/amd/display: fix compilation error

[Sasha Levin]

From: Hariprasad Kelam <hariprasad.kelam@gmail.com>

[ Upstream commit 88099f53cc3717437f5fc9cf84205c5b65118377 ]

this patch fixes below compilation error

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In
function ‘dcn10_apply_ctx_for_surface’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3:
error: implicit declaration of function ‘udelay’
[-Werror=implicit-function-declaration]
   udelay(underflow_check_delay_us);

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 7736ef123e9b..ead221ccb93e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -23,6 +23,7 @@
  *
  */
 
+#include <linux/delay.h>
 #include "dm_services.h"
 #include "core_types.h"
 #include "resource.h"
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx