[PATCH AUTOSEL 5.2 18/76] drm/amd/display: Wait for backlight programming completion in set backlight level

[PATCH AUTOSEL 5.2 18/76] drm/amd/display: Wait for backlight programming completion in set backlight level

[Sasha Levin]

From: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>

[ Upstream commit c7990daebe71d11a9e360b5c3b0ecd1846a3a4bb ]

[WHY]
Currently we don't wait for blacklight programming completion in DMCU
when setting backlight level. Some sequences such as PSR static screen
event trigger reprogramming requires it to be complete.

[How]
Add generic wait for dmcu command completion in set backlight level.

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce/dce_abm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
index 2959c3c9390b9..da30ae04e82bb 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
@@ -234,6 +234,10 @@ static void dmcu_set_backlight_level(
 	s2 |= (backlight_8_bit << ATOM_S2_CURRENT_BL_LEVEL_SHIFT);
 
 	REG_WRITE(BIOS_SCRATCH_2, s2);
+
+	/* waitDMCUReadyForCmd */
+	REG_WAIT(MASTER_COMM_CNTL_REG, MASTER_COMM_INTERRUPT,
+			0, 1, 80000);
 }
 
 static void dce_abm_init(struct abm *abm)
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.2 19/76] drm/amd/display: fix DMCU hang when going into Modern Standby

[Sasha Levin]

From: Zi Yu Liao <ziyu.liao@amd.com>

[ Upstream commit 1ca068ed34d6b39d336c1b0d618ed73ba8f04548 ]

[why]
When the system is going into suspend, set_backlight gets called
after the eDP got blanked. Since smooth brightness is enabled,
the driver will make a call into the DMCU to ramp the brightness.
The DMCU would try to enable ABM to do so. But since the display is
blanked, this ends up causing ABM1_ACE_DBUF_REG_UPDATE_PENDING to
get stuck at 1, which results in a dead lock in the DMCU firmware.

[how]
Disable brightness ramping when the eDP display is blanked.

Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index a3ff33ff6da16..adf39e3b8d29d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2284,7 +2284,7 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
 			if (core_dc->current_state->res_ctx.pipe_ctx[i].stream) {
 				if (core_dc->current_state->res_ctx.
 						pipe_ctx[i].stream->link
-						== link)
+						== link) {
 					/* DMCU -1 for all controller id values,
 					 * therefore +1 here
 					 */
@@ -2292,6 +2292,13 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
 						core_dc->current_state->
 						res_ctx.pipe_ctx[i].stream_res.tg->inst +
 						1;
+
+					/* Disable brightness ramping when the display is blanked
+					 * as it can hang the DMCU
+					 */
+					if (core_dc->current_state->res_ctx.pipe_ctx[i].plane_state == NULL)
+						frame_ramp = 0;
+				}
 			}
 		}
 		abm->funcs->set_backlight_level_pwm(
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.2 20/76] drm/amd/display: use encoder's engine id to find matched free audio device

[Sasha Levin]

From: Tai Man <taiman.wong@amd.com>

[ Upstream commit 74eda776d7a4e69ec7aa1ce30a87636f14220fbb ]

[Why]
On some platforms, the encoder id 3 is not populated. So the encoders
are not stored in right order as index (id: 0, 1, 2, 4, 5) at pool. This
would cause encoders id 4 & id 5 to fail when finding corresponding
audio device, defaulting to the first available audio device. As result,
we cannot stream audio into two DP ports with encoders id 4 & id 5.

[How]
It need to create enough audio device objects (0 - 5) to perform matching.
Then use encoder engine id to find matched audio device.

Signed-off-by: Tai Man <taiman.wong@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index eac7186e4f084..ad82906b99db9 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -254,7 +254,7 @@ bool resource_construct(
 		 * PORT_CONNECTIVITY == 1 (as instructed by HW team).
 		 */
 		update_num_audio(&straps, &num_audio, &pool->audio_support);
-		for (i = 0; i < pool->pipe_count && i < num_audio; i++) {
+		for (i = 0; i < caps->num_audio; i++) {
 			struct audio *aud = create_funcs->create_audio(ctx, i);
 
 			if (aud == NULL) {
@@ -1702,6 +1702,12 @@ static struct audio *find_first_free_audio(
 			return pool->audios[i];
 		}
 	}
+
+    /* use engine id to find free audio */
+	if ((id < pool->audio_count) && (res_ctx->is_audio_acquired[id] == false)) {
+		return pool->audios[id];
+	}
+
 	/*not found the matching one, first come first serve*/
 	for (i = 0; i < pool->audio_count; i++) {
 		if (res_ctx->is_audio_acquired[i] == false) {
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.2 21/76] drm/amd/display: put back front end initialization sequence

[Sasha Levin]

From: Eric Yang <Eric.Yang2@amd.com>

[ Upstream commit feb7eb522e0a7a22c1e60d386bd3c3bfa1d5e4f7 ]

[Why]
Seamless boot optimization removed proper front end power off sequence.
In driver disable enable case, this causes driver to power gate hubp
and dpp while there is still memory fetching going on, this can cause
invalid memory requests to be generated which will hang data fabric.

[How]
Put back proper front end power off sequence

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index c7b4c3048b71d..5cc5dabf4d652 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1120,16 +1120,7 @@ static void dcn10_init_hw(struct dc *dc)
 	 * everything down.
 	 */
 	if (dcb->funcs->is_accelerated_mode(dcb) || dc->config.power_down_display_on_boot) {
-		for (i = 0; i < dc->res_pool->pipe_count; i++) {
-			struct hubp *hubp = dc->res_pool->hubps[i];
-			struct dpp *dpp = dc->res_pool->dpps[i];
-
-			hubp->funcs->hubp_init(hubp);
-			dc->res_pool->opps[i]->mpc_tree_params.opp_id = dc->res_pool->opps[i]->inst;
-			plane_atomic_power_down(dc, dpp, hubp);
-		}
-
-		apply_DEGVIDCN10_253_wa(dc);
+		dc->hwss.init_pipes(dc, dc->current_state);
 	}
 
 	for (i = 0; i < dc->res_pool->audio_count; i++) {
@@ -1298,10 +1289,6 @@ static bool dcn10_set_input_transfer_func(struct pipe_ctx *pipe_ctx,
 	return result;
 }
 
-
-
-
-
 static bool
 dcn10_set_output_transfer_func(struct pipe_ctx *pipe_ctx,
 			       const struct dc_stream_state *stream)
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.2 22/76] drm/amd/display: allocate 4 ddc engines for RV2

[Sasha Levin]

From: Derek Lai <Derek.Lai@amd.com>

[ Upstream commit 67fd6c0d2de8e51e84ff3fa6e68bbd524f823e49 ]

[Why]
Driver will create 0, 1, and 2 ddc engines for RV2,
but some platforms used 0, 1, and 3.

[How]
Still allocate 4 ddc engines for RV2.

Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
index 7eccb54c421d9..aac52eed6b2aa 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
@@ -512,7 +512,7 @@ static const struct resource_caps rv2_res_cap = {
 		.num_audio = 3,
 		.num_stream_encoder = 3,
 		.num_pll = 3,
-		.num_ddc = 3,
+		.num_ddc = 4,
 };
 #endif
 
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.2 25/76] drm/amd/display: Increase size of audios array

[Sasha Levin]

From: Tai Man <taiman.wong@amd.com>

[ Upstream commit 7352193a33dfc9b69ba3bf6a8caea925b96243b1 ]

[Why]
The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES)
but the max number of audio devices (num_audio) is 7. In some projects,
it will run out of audios array.

[How]
Incraese the audios array size to 7.

Signed-off-by: Tai Man <taiman.wong@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/inc/core_types.h   | 2 +-
 drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
index 6f5ab05d64677..6f0cc718fbd75 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
@@ -169,7 +169,7 @@ struct resource_pool {
 	struct clock_source *clock_sources[MAX_CLOCK_SOURCES];
 	unsigned int clk_src_count;
 
-	struct audio *audios[MAX_PIPES];
+	struct audio *audios[MAX_AUDIOS];
 	unsigned int audio_count;
 	struct audio_support audio_support;
 
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h b/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h
index 4c8e2c6fb6dbc..72266efd826cf 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h
@@ -34,6 +34,7 @@
  * Data types shared between different Virtual HW blocks
  ******************************************************************************/
 
+#define MAX_AUDIOS 7
 #define MAX_PIPES 6
 
 struct gamma_curve {
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.2 23/76] drm/amd/display: Fix dc_create failure handling and 666 color depths

[Sasha Levin]

From: Julian Parkin <julian.parkin@amd.com>

[ Upstream commit 0905f32977268149f06e3ce6ea4bd6d374dd891f ]

[Why]
It is possible (but very unlikely) that constructing dc fails
before current_state is created.

We support 666 color depth in some scenarios, but this
isn't handled in get_norm_pix_clk. It uses exactly the
same pixel clock as the 888 case.

[How]
Check for non null current_state before destructing.

Add case for 666 color depth to get_norm_pix_clk to
avoid assertion.

Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c          | 6 ++++--
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 1 +
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index ee6b646180b66..0a7adc2925e35 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -608,8 +608,10 @@ const struct dc_link_settings *dc_link_get_link_cap(
 
 static void destruct(struct dc *dc)
 {
-	dc_release_state(dc->current_state);
-	dc->current_state = NULL;
+	if (dc->current_state) {
+		dc_release_state(dc->current_state);
+		dc->current_state = NULL;
+	}
 
 	destroy_links(dc);
 
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index ad82906b99db9..b87e8d80bb6a8 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -1872,6 +1872,7 @@ static int get_norm_pix_clk(const struct dc_crtc_timing *timing)
 		pix_clk /= 2;
 	if (timing->pixel_encoding != PIXEL_ENCODING_YCBCR422) {
 		switch (timing->display_color_depth) {
+		case COLOR_DEPTH_666:
 		case COLOR_DEPTH_888:
 			normalized_pix_clk = pix_clk;
 			break;
-- 
2.20.1

[PATCH AUTOSEL 5.2 24/76] drm/amd/display: Only enable audio if speaker allocation exists

[Sasha Levin]

From: Alvin Lee <alvin.lee2@amd.com>

[ Upstream commit 6ac25e6d5b2fbf251e9fa2f4131d42c815b43867 ]

[Why]

In dm_helpers_parse_edid_caps, there is a corner case where no speakers
can be allocated even though the audio mode count is greater than 0.
Enabling audio when no speaker allocations exists can cause issues in
the video stream.

[How]

Add a check to not enable audio unless one or more speaker allocations
exist (since doing this can cause issues in the video stream).

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index b87e8d80bb6a8..0fd759d3a0e7d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -2019,7 +2019,7 @@ enum dc_status resource_map_pool_resources(
 	/* TODO: Add check if ASIC support and EDID audio */
 	if (!stream->converter_disable_audio &&
 	    dc_is_audio_capable_signal(pipe_ctx->stream->signal) &&
-	    stream->audio_info.mode_count) {
+	    stream->audio_info.mode_count && stream->audio_info.flags.all) {
 		pipe_ctx->stream_res.audio = find_first_free_audio(
 		&context->res_ctx, pool, pipe_ctx->stream_res.stream_enc->id);
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel