[PATCH AUTOSEL 5.7 09/60] drm/amdgpu: avoid dereferencing a NULL pointer

[PATCH AUTOSEL 5.7 09/60] drm/amdgpu: avoid dereferencing a NULL pointer

[Sasha Levin]

From: Jack Xiao <Jack.Xiao@amd.com>

[ Upstream commit 55611b507fd6453d26030c0c0619fdf0c262766d ]

Check if irq_src is NULL to avoid dereferencing a NULL pointer,
for MES ring is uneccessary to recieve an interrupt notification.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index 7531527067dfb..892c1e9a1eb04 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -408,7 +408,9 @@ int amdgpu_fence_driver_start_ring(struct amdgpu_ring *ring,
 		ring->fence_drv.gpu_addr = adev->uvd.inst[ring->me].gpu_addr + index;
 	}
 	amdgpu_fence_write(ring, atomic_read(&ring->fence_drv.last_seq));
-	amdgpu_irq_get(adev, irq_src, irq_type);
+
+	if (irq_src)
+		amdgpu_irq_get(adev, irq_src, irq_type);
 
 	ring->fence_drv.irq_src = irq_src;
 	ring->fence_drv.irq_type = irq_type;
@@ -529,8 +531,9 @@ void amdgpu_fence_driver_fini(struct amdgpu_device *adev)
 			/* no need to trigger GPU reset as we are unloading */
 			amdgpu_fence_driver_force_completion(ring);
 		}
-		amdgpu_irq_put(adev, ring->fence_drv.irq_src,
-			       ring->fence_drv.irq_type);
+		if (ring->fence_drv.irq_src)
+			amdgpu_irq_put(adev, ring->fence_drv.irq_src,
+				       ring->fence_drv.irq_type);
 		drm_sched_fini(&ring->sched);
 		del_timer_sync(&ring->fence_drv.fallback_timer);
 		for (j = 0; j <= ring->fence_drv.num_fences_mask; ++j)
@@ -566,8 +569,9 @@ void amdgpu_fence_driver_suspend(struct amdgpu_device *adev)
 		}
 
 		/* disable the interrupt */
-		amdgpu_irq_put(adev, ring->fence_drv.irq_src,
-			       ring->fence_drv.irq_type);
+		if (ring->fence_drv.irq_src)
+			amdgpu_irq_put(adev, ring->fence_drv.irq_src,
+				       ring->fence_drv.irq_type);
 	}
 }
 
@@ -593,8 +597,9 @@ void amdgpu_fence_driver_resume(struct amdgpu_device *adev)
 			continue;
 
 		/* enable the interrupt */
-		amdgpu_irq_get(adev, ring->fence_drv.irq_src,
-			       ring->fence_drv.irq_type);
+		if (ring->fence_drv.irq_src)
+			amdgpu_irq_get(adev, ring->fence_drv.irq_src,
+				       ring->fence_drv.irq_type);
 	}
 }
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 10/60] drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_display.c | 4 +++-
 drivers/gpu/drm/radeon/radeon_drv.c     | 4 +++-
 drivers/gpu/drm/radeon/radeon_kms.c     | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 35db79a168bf7..df1a7eb736517 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -635,8 +635,10 @@ radeon_crtc_set_config(struct drm_mode_set *set,
 	dev = set->crtc->dev;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_crtc_helper_set_config(set, ctx);
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 59f8186a24151..0cf0b00a0623e 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -549,8 +549,10 @@ long radeon_drm_ioctl(struct file *filp,
 	long ret;
 	dev = file_priv->minor->dev;
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_ioctl(filp, cmd, arg);
 	
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 58176db85952c..779e4cd86245d 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -638,8 +638,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (r < 0)
+	if (r < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return r;
+	}
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 28/60] drm/radeon: disable AGP by default

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit ba806f98f868ce107aa9c453fef751de9980e4af ]

Always use the PCI GART instead. We just have to many cases
where AGP still causes problems. This means a performance
regression for some GPUs, but also a bug fix for some others.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 0cf0b00a0623e..6f0d1971099b7 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -171,12 +171,7 @@ int radeon_no_wb;
 int radeon_modeset = -1;
 int radeon_dynclks = -1;
 int radeon_r4xx_atom = 0;
-#ifdef __powerpc__
-/* Default to PCI on PowerPC (fdo #95017) */
 int radeon_agpmode = -1;
-#else
-int radeon_agpmode = 0;
-#endif
 int radeon_vram_limit = 0;
 int radeon_gart_size = -1; /* auto */
 int radeon_benchmarking = 0;
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 32/60] drm/amd/display: Improve DisplayPort monitor interop

[Sasha Levin]

From: Aric Cyr <aric.cyr@amd.com>

[ Upstream commit eec3303de3378cdfaa0bb86f43546dbbd88f94e2 ]

[Why]
DC is very fast at link training and stream enablement
which causes issues such as blackscreens for non-compliant
monitors.

[How]
After debugging with scaler vendors we implement the
minimum delays at the necessary locations to ensure
the monitor does not hang.  Delays are generic due to
lack of IEEE OUI information on the failing displays.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c    |  4 +++-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 16 ++++++++++------
 .../amd/display/dc/dce110/dce110_hw_sequencer.c  | 11 ++++++++++-
 3 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 67cfff1586e9f..3f157bcc174b9 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3146,9 +3146,11 @@ void core_link_disable_stream(struct pipe_ctx *pipe_ctx)
 			write_i2c_redriver_setting(pipe_ctx, false);
 		}
 	}
-	dc->hwss.disable_stream(pipe_ctx);
 
 	disable_link(pipe_ctx->stream->link, pipe_ctx->stream->signal);
+
+	dc->hwss.disable_stream(pipe_ctx);
+
 	if (pipe_ctx->stream->timing.flags.DSC) {
 		if (dc_is_dp_signal(pipe_ctx->stream->signal))
 			dp_set_dsc_enable(pipe_ctx, false);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index caa090d0b6acc..1ada01322cd2c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1103,6 +1103,10 @@ static inline enum link_training_result perform_link_training_int(
 	dpcd_pattern.v1_4.TRAINING_PATTERN_SET = DPCD_TRAINING_PATTERN_VIDEOIDLE;
 	dpcd_set_training_pattern(link, dpcd_pattern);
 
+	/* delay 5ms after notifying sink of idle pattern before switching output */
+	if (link->connector_signal != SIGNAL_TYPE_EDP)
+		msleep(5);
+
 	/* 4. mainlink output idle pattern*/
 	dp_set_hw_test_pattern(link, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0);
 
@@ -1552,6 +1556,12 @@ bool perform_link_training_with_retries(
 	struct dc_link *link = stream->link;
 	enum dp_panel_mode panel_mode = dp_get_panel_mode(link);
 
+	/* We need to do this before the link training to ensure the idle pattern in SST
+	 * mode will be sent right after the link training
+	 */
+	link->link_enc->funcs->connect_dig_be_to_fe(link->link_enc,
+							pipe_ctx->stream_res.stream_enc->id, true);
+
 	for (j = 0; j < attempts; ++j) {
 
 		dp_enable_link_phy(
@@ -1568,12 +1578,6 @@ bool perform_link_training_with_retries(
 
 		dp_set_panel_mode(link, panel_mode);
 
-		/* We need to do this before the link training to ensure the idle pattern in SST
-		 * mode will be sent right after the link training
-		 */
-		link->link_enc->funcs->connect_dig_be_to_fe(link->link_enc,
-								pipe_ctx->stream_res.stream_enc->id, true);
-
 		if (link->aux_access_disabled) {
 			dc_link_dp_perform_link_training_skip_aux(link, link_setting);
 			return true;
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 10527593868cc..24ca592c90df5 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1090,8 +1090,17 @@ void dce110_blank_stream(struct pipe_ctx *pipe_ctx)
 		dc_link_set_abm_disable(link);
 	}
 
-	if (dc_is_dp_signal(pipe_ctx->stream->signal))
+	if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
 		pipe_ctx->stream_res.stream_enc->funcs->dp_blank(pipe_ctx->stream_res.stream_enc);
+
+		/*
+		 * After output is idle pattern some sinks need time to recognize the stream
+		 * has changed or they enter protection state and hang.
+		 */
+		if (!dc_is_embedded_signal(pipe_ctx->stream->signal))
+			msleep(60);
+	}
+
 }
 
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 33/60] drm/amdgpu/display bail early in dm_pp_get_static_clocks

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 376814f5fcf1aadda501d1413d56e8af85d19a97 ]

If there are no supported callbacks.  We'll fall back to the
nominal clocks.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
index a2e1a73f66b81..7cee8070cb113 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
@@ -530,6 +530,8 @@ bool dm_pp_get_static_clocks(
 			&pp_clk_info);
 	else if (adev->smu.ppt_funcs)
 		ret = smu_get_current_clocks(&adev->smu, &pp_clk_info);
+	else
+		return false;
 	if (ret)
 		return false;
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 34/60] drm/amdgpu/display: properly guard the calls to swSMU functions

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 4072327a2622af8688b88f5cd0a472136d3bf33d ]

It's only applicable on newer asics.  We could end up here when
using DC on older asics like SI or KV.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
index 7cee8070cb113..5c6a6ae48d396 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
@@ -106,7 +106,7 @@ bool dm_pp_apply_display_requirements(
 			adev->powerplay.pp_funcs->display_configuration_change(
 				adev->powerplay.pp_handle,
 				&adev->pm.pm_display_cfg);
-		else
+		else if (adev->smu.ppt_funcs)
 			smu_display_configuration_change(smu,
 							 &adev->pm.pm_display_cfg);
 
@@ -592,7 +592,7 @@ void pp_rv_set_wm_ranges(struct pp_smu *pp,
 	if (pp_funcs && pp_funcs->set_watermarks_for_clocks_ranges)
 		pp_funcs->set_watermarks_for_clocks_ranges(pp_handle,
 							   &wm_with_clock_ranges);
-	else
+	else if (adev->smu.ppt_funcs)
 		smu_set_watermarks_for_clock_ranges(&adev->smu,
 				&wm_with_clock_ranges);
 }
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 35/60] drm/amd/powerplay: fix compile error with ARCH=arc

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 9822ba2ead1baa3de4860ad9472f652c4cc78c9c ]

Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
      22 |  pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
         |  ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
     176 |   BUG();

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index 655ba4fb05dcd..48af305d42d54 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -159,7 +159,8 @@ int smu_v11_0_init_microcode(struct smu_context *smu)
 		chip_name = "navi12";
 		break;
 	default:
-		BUG();
+		dev_err(adev->dev, "Unsupported ASIC type %d\n", adev->asic_type);
+		return -EINVAL;
 	}
 
 	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_smc.bin", chip_name);
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.7 44/60] drm/amd/powerplay: suppress compile error around BUG_ON

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 75bc07e2403caea9ecac69f766dfb7dc33547594 ]

To suppress the compile error below for "ARCH=arc".
   drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c: In function 'arcturus_fill_eeprom_i2c_req':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
      22 |  pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
         |  ^~~~~~~
   include/asm-generic/bug.h:62:57: note: in expansion of macro 'BUG'
      62 | #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
         |                                                         ^~~
   drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2157:2: note: in expansion of macro 'BUG_ON'
    2157 |  BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
index 1ef0923f71906..9ad0e6f18be49 100644
--- a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
@@ -2035,8 +2035,6 @@ static void arcturus_fill_eeprom_i2c_req(SwI2cRequest_t  *req, bool write,
 {
 	int i;
 
-	BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);
-
 	req->I2CcontrollerPort = 0;
 	req->I2CSpeed = 2;
 	req->SlaveAddress = address;
@@ -2074,6 +2072,12 @@ static int arcturus_i2c_eeprom_read_data(struct i2c_adapter *control,
 	struct smu_table_context *smu_table = &adev->smu.smu_table;
 	struct smu_table *table = &smu_table->driver_table;
 
+	if (numbytes > MAX_SW_I2C_COMMANDS) {
+		dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
+			numbytes, MAX_SW_I2C_COMMANDS);
+		return -EINVAL;
+	}
+
 	memset(&req, 0, sizeof(req));
 	arcturus_fill_eeprom_i2c_req(&req, false, address, numbytes, data);
 
@@ -2110,6 +2114,12 @@ static int arcturus_i2c_eeprom_write_data(struct i2c_adapter *control,
 	SwI2cRequest_t req;
 	struct amdgpu_device *adev = to_amdgpu_device(control);
 
+	if (numbytes > MAX_SW_I2C_COMMANDS) {
+		dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
+			numbytes, MAX_SW_I2C_COMMANDS);
+		return -EINVAL;
+	}
+
 	memset(&req, 0, sizeof(req));
 	arcturus_fill_eeprom_i2c_req(&req, true, address, numbytes, data);
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx