[PATCH AUTOSEL 5.8 12/20] drm/amdkfd: fix a memory leak issue

[PATCH AUTOSEL 5.8 12/20] drm/amdkfd: fix a memory leak issue

[Sasha Levin]

From: Dennis Li <Dennis.Li@amd.com>

[ Upstream commit 087d764159996ae378b08c0fdd557537adfd6899 ]

In the resume stage of GPU recovery, start_cpsch will call pm_init
which set pm->allocated as false, cause the next pm_release_ib has
no chance to release ib memory.

Add pm_release_ib in stop_cpsch which will be called in the suspend
stage of GPU recovery.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index e9c4867abeffb..00b042a15373a 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -1177,6 +1177,8 @@ static int stop_cpsch(struct device_queue_manager *dqm)
 	dqm->sched_running = false;
 	dqm_unlock(dqm);
 
+	pm_release_ib(&dqm->packets);
+
 	kfd_gtt_sa_free(dqm->dev, dqm->fence_mem);
 	pm_uninit(&dqm->packets, hanging);
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 13/20] drm/amd/display: Don't use DRM_ERROR() for DTM add topology

[Sasha Levin]

From: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>

[ Upstream commit 4cdd7b332ed139b1e37faeb82409a14490adb644 ]

[Why]
Previously we were only calling add_topology when hdcp was being enabled.
Now we call add_topology by default so the ERROR messages are printed if
the firmware is not loaded.

This error message is not relevant for normal display functionality so
no need to print a ERROR message.

[How]
Change DRM_ERROR to DRM_INFO

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
index fb1161dd7ea80..3a367a5968ae1 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
@@ -88,7 +88,7 @@ enum mod_hdcp_status mod_hdcp_add_display_to_topology(struct mod_hdcp *hdcp,
 	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
 	if (!psp->dtm_context.dtm_initialized) {
-		DRM_ERROR("Failed to add display topology, DTM TA is not initialized.");
+		DRM_INFO("Failed to add display topology, DTM TA is not initialized.");
 		display->state = MOD_HDCP_DISPLAY_INACTIVE;
 		return MOD_HDCP_STATUS_FAILURE;
 	}
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 14/20] drm/amd/display: update nv1x stutter latencies

[Sasha Levin]

From: Jun Lei <jun.lei@amd.com>

[ Upstream commit c4790a8894232f39c25c7c546c06efe074e63384 ]

[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.

[how]
Update SOC params to account for this worst case latency.

Signed-off-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 2d9055eb3ce92..20bdabebbc434 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -409,8 +409,8 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_0_nv14_soc = {
 			},
 		},
 	.num_states = 5,
-	.sr_exit_time_us = 8.6,
-	.sr_enter_plus_exit_time_us = 10.9,
+	.sr_exit_time_us = 11.6,
+	.sr_enter_plus_exit_time_us = 13.9,
 	.urgent_latency_us = 4.0,
 	.urgent_latency_pixel_data_only_us = 4.0,
 	.urgent_latency_pixel_mixed_with_vm_data_us = 4.0,
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 15/20] drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is

[Sasha Levin]

From: Michel Dänzer <mdaenzer@redhat.com>

[ Upstream commit 2f228aab21bbc74e90e267a721215ec8be51daf7 ]

Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:

 * Hence drivers must not consult @active in their various
 * &drm_mode_config_funcs.atomic_check callback to reject an atomic
 * commit.

atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.

This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):

* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
  (which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
  value from off to on returned EINVAL.

v2:
* Minor changes to code comment and commit log, per review feedback.

GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 32 ++++++-------------
 1 file changed, 10 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 3f7eced92c0c8..7c1cc0ba30a55 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5257,19 +5257,6 @@ static void dm_crtc_helper_disable(struct drm_crtc *crtc)
 {
 }
 
-static bool does_crtc_have_active_cursor(struct drm_crtc_state *new_crtc_state)
-{
-	struct drm_device *dev = new_crtc_state->crtc->dev;
-	struct drm_plane *plane;
-
-	drm_for_each_plane_mask(plane, dev, new_crtc_state->plane_mask) {
-		if (plane->type == DRM_PLANE_TYPE_CURSOR)
-			return true;
-	}
-
-	return false;
-}
-
 static int count_crtc_active_planes(struct drm_crtc_state *new_crtc_state)
 {
 	struct drm_atomic_state *state = new_crtc_state->state;
@@ -5349,19 +5336,20 @@ static int dm_crtc_helper_atomic_check(struct drm_crtc *crtc,
 		return ret;
 	}
 
-	/* In some use cases, like reset, no stream is attached */
-	if (!dm_crtc_state->stream)
-		return 0;
-
 	/*
-	 * We want at least one hardware plane enabled to use
-	 * the stream with a cursor enabled.
+	 * We require the primary plane to be enabled whenever the CRTC is, otherwise
+	 * drm_mode_cursor_universal may end up trying to enable the cursor plane while all other
+	 * planes are disabled, which is not supported by the hardware. And there is legacy
+	 * userspace which stops using the HW cursor altogether in response to the resulting EINVAL.
 	 */
-	if (state->enable && state->active &&
-	    does_crtc_have_active_cursor(state) &&
-	    dm_crtc_state->active_planes == 0)
+	if (state->enable &&
+	    !(state->plane_mask & drm_plane_mask(crtc->primary)))
 		return -EINVAL;
 
+	/* In some use cases, like reset, no stream is attached */
+	if (!dm_crtc_state->stream)
+		return 0;
+
 	if (dc_validate_stream(dc, dm_crtc_state->stream) == DC_OK)
 		return 0;
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 16/20] drm/amd/display: Don't log hdcp module warnings in dmesg

[Sasha Levin]

From: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>

[ Upstream commit 875d369d8f75275d30e59421602d9366426abff7 ]

[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()

[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.h b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.h
index d3192b9d0c3d8..47f8ee2832ff0 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.h
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_log.h
@@ -27,7 +27,7 @@
 #define MOD_HDCP_LOG_H_
 
 #ifdef CONFIG_DRM_AMD_DC_HDCP
-#define HDCP_LOG_ERR(hdcp, ...) DRM_WARN(__VA_ARGS__)
+#define HDCP_LOG_ERR(hdcp, ...) DRM_DEBUG_KMS(__VA_ARGS__)
 #define HDCP_LOG_VER(hdcp, ...) DRM_DEBUG_KMS(__VA_ARGS__)
 #define HDCP_LOG_FSM(hdcp, ...) DRM_DEBUG_KMS(__VA_ARGS__)
 #define HDCP_LOG_TOP(hdcp, ...) pr_debug("[HDCP_TOP]:"__VA_ARGS__)
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx