[PATCH AUTOSEL 5.13 005/189] drm/amd/display: fix HDCP reset sequence on reinitialize

[PATCH AUTOSEL 5.13 005/189] drm/amd/display: fix HDCP reset sequence on reinitialize

[Sasha Levin]

From: Brandon Syu <Brandon.Syu@amd.com>

[ Upstream commit 99c248c41c2199bd34232ce8e729d18c4b343b64 ]

[why]
When setup is called after hdcp has already setup,
it would cause to disable HDCP flow won’t execute.

[how]
Don't clean up hdcp content to be 0.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
index 68a6481d7f8f..b963226e8af4 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c
@@ -260,7 +260,6 @@ enum mod_hdcp_status mod_hdcp_setup(struct mod_hdcp *hdcp,
 	struct mod_hdcp_output output;
 	enum mod_hdcp_status status = MOD_HDCP_STATUS_SUCCESS;
 
-	memset(hdcp, 0, sizeof(struct mod_hdcp));
 	memset(&output, 0, sizeof(output));
 	hdcp->config = *config;
 	HDCP_TOP_INTERFACE_TRACE(hdcp);
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 006/189] drm/amd/display: Revert wait vblank on update dpp clock

[Sasha Levin]

From: Lewis Huang <Lewis.Huang@amd.com>

[ Upstream commit d5433a9f692f57c814286f8af2746c567ef79fc8 ]

[Why]
This change only fix dpp clock switch to lower case.
New solution later can fix both case, which is "dc: skip
program clock when allow seamless boot"

[How]
This reverts commit "dc: wait vblank when stream enabled
and update dpp clock"

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c   | 10 +---------
 drivers/gpu/drm/amd/display/dc/core/dc.c            | 13 -------------
 drivers/gpu/drm/amd/display/dc/dc.h                 |  1 -
 3 files changed, 1 insertion(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index a06e86853bb9..49d19fdd750b 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -128,7 +128,7 @@ void rn_update_clocks(struct clk_mgr *clk_mgr_base,
 	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
 	struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;
 	struct dc *dc = clk_mgr_base->ctx->dc;
-	int display_count, i;
+	int display_count;
 	bool update_dppclk = false;
 	bool update_dispclk = false;
 	bool dpp_clock_lowered = false;
@@ -210,14 +210,6 @@ void rn_update_clocks(struct clk_mgr *clk_mgr_base,
 				clk_mgr_base->clks.dppclk_khz,
 				safe_to_lower);
 
-		for (i = 0; i < context->stream_count; i++) {
-			if (context->streams[i]->signal == SIGNAL_TYPE_EDP &&
-				context->streams[i]->apply_seamless_boot_optimization) {
-				dc_wait_for_vblank(dc, context->streams[i]);
-				break;
-			}
-		}
-
 		clk_mgr_base->clks.actual_dppclk_khz =
 				rn_vbios_smu_set_dppclk(clk_mgr, clk_mgr_base->clks.dppclk_khz);
 
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 4713f09bcbf1..e57df2f6f824 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3219,19 +3219,6 @@ void dc_link_remove_remote_sink(struct dc_link *link, struct dc_sink *sink)
 	}
 }
 
-void dc_wait_for_vblank(struct dc *dc, struct dc_stream_state *stream)
-{
-	int i;
-
-	for (i = 0; i < dc->res_pool->pipe_count; i++)
-		if (dc->current_state->res_ctx.pipe_ctx[i].stream == stream) {
-			struct timing_generator *tg =
-				dc->current_state->res_ctx.pipe_ctx[i].stream_res.tg;
-			tg->funcs->wait_for_state(tg, CRTC_STATE_VBLANK);
-			break;
-		}
-}
-
 void get_clock_requirements_for_state(struct dc_state *state, struct AsicStateEx *info)
 {
 	info->displayClock				= (unsigned int)state->bw_ctx.bw.dcn.clk.dispclk_khz;
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 100d434f7a03..65f801b50686 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -719,7 +719,6 @@ void dc_init_callbacks(struct dc *dc,
 void dc_deinit_callbacks(struct dc *dc);
 void dc_destroy(struct dc **dc);
 
-void dc_wait_for_vblank(struct dc *dc, struct dc_stream_state *stream);
 /*******************************************************************************
  * Surface Interfaces
  ******************************************************************************/
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 007/189] drm/amd/display: Fix BSOD with NULL check

[Sasha Levin]

From: Chris Park <Chris.Park@amd.com>

[ Upstream commit b2d4b9f72fb14c1e6e4f0128964a84539a72d831 ]

[Why]
CLK mgr is null for server settings.

[How]
Guard the function with NULL check.

Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index e57df2f6f824..a869702d77af 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3274,7 +3274,7 @@ void dc_allow_idle_optimizations(struct dc *dc, bool allow)
 	if (dc->debug.disable_idle_power_optimizations)
 		return;
 
-	if (dc->clk_mgr->funcs->is_smu_present)
+	if (dc->clk_mgr != NULL && dc->clk_mgr->funcs->is_smu_present)
 		if (!dc->clk_mgr->funcs->is_smu_present(dc->clk_mgr))
 			return;
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 008/189] drm/amd/amdgpu/sriov disable all ip hw status by default

[Sasha Levin]

From: Jack Zhang <Jack.Zhang1@amd.com>

[ Upstream commit 95ea3dbc4e9548d35ab6fbf67675cef8c293e2f5 ]

Disable all ip's hw status to false before any hw_init.
Only set it to true until its hw_init is executed.

The old 5.9 branch has this change but somehow the 5.11 kernrel does
not have this fix.

Without this change, sriov tdr have gfx IB test fail.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Review-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 57ec108b5972..f008f001951b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2856,7 +2856,7 @@ static int amdgpu_device_ip_reinit_early_sriov(struct amdgpu_device *adev)
 		AMD_IP_BLOCK_TYPE_IH,
 	};
 
-	for (i = 0; i < ARRAY_SIZE(ip_order); i++) {
+	for (i = 0; i < adev->num_ip_blocks; i++) {
 		int j;
 		struct amdgpu_ip_block *block;
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 014/189] drm/amd/display: fix potential gpu reset deadlock

[Sasha Levin]

From: Roman Li <Roman.Li@amd.com>

[ Upstream commit cf8b92a75646735136053ce51107bfa8cfc23191 ]

[Why]
In gpu reset dc_lock acquired in dm_suspend().
Asynchronously handle_hpd_rx_irq can also be called
through amdgpu_dm_irq_suspend->flush_work, which also
tries to acquire dc_lock. That causes a deadlock.

[How]
Check if amdgpu executing reset before acquiring dc_lock.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 652cc1a0e450..875fd187463e 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2726,13 +2726,15 @@ static void handle_hpd_rx_irq(void *param)
 		}
 	}
 
-	mutex_lock(&adev->dm.dc_lock);
+	if (!amdgpu_in_reset(adev))
+		mutex_lock(&adev->dm.dc_lock);
 #ifdef CONFIG_DRM_AMD_DC_HDCP
 	result = dc_link_handle_hpd_rx_irq(dc_link, &hpd_irq_data, NULL);
 #else
 	result = dc_link_handle_hpd_rx_irq(dc_link, NULL, NULL);
 #endif
-	mutex_unlock(&adev->dm.dc_lock);
+	if (!amdgpu_in_reset(adev))
+		mutex_unlock(&adev->dm.dc_lock);
 
 out:
 	if (result && !is_mst_root_connector) {
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 015/189] drm/amdgpu: change the default timeout for kernel compute queues

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 67387dfe0f6630f2d4f412ce77debec23a49db7a ]

Change to 60s.  This matches what we already do in virtualization.
Infinite timeout can lead to deadlocks in the kernel.

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 +++-----
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c    | 4 ++--
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index f008f001951b..d83f2ee150b8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -3181,8 +3181,8 @@ static int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
 	int ret = 0;
 
 	/*
-	 * By default timeout for non compute jobs is 10000.
-	 * And there is no timeout enforced on compute jobs.
+	 * By default timeout for non compute jobs is 10000
+	 * and 60000 for compute jobs.
 	 * In SR-IOV or passthrough mode, timeout for compute
 	 * jobs are 60000 by default.
 	 */
@@ -3191,10 +3191,8 @@ static int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
 	if (amdgpu_sriov_vf(adev))
 		adev->compute_timeout = amdgpu_sriov_is_pp_one_vf(adev) ?
 					msecs_to_jiffies(60000) : msecs_to_jiffies(10000);
-	else if (amdgpu_passthrough(adev))
-		adev->compute_timeout =  msecs_to_jiffies(60000);
 	else
-		adev->compute_timeout = MAX_SCHEDULE_TIMEOUT;
+		adev->compute_timeout =  msecs_to_jiffies(60000);
 
 	if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
 		while ((timeout_setting = strsep(&input, ",")) &&
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index f93883db2b46..57a055aa854d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -287,9 +287,9 @@ module_param_named(msi, amdgpu_msi, int, 0444);
  *   for SDMA and Video.
  *
  * By default(with no lockup_timeout settings), the timeout for all non-compute(GFX, SDMA and Video)
- * jobs is 10000. And there is no timeout enforced on compute jobs.
+ * jobs is 10000. The timeout for compute is 60000.
  */
-MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms (default: for bare metal 10000 for non-compute jobs and infinity timeout for compute jobs; "
+MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms (default: for bare metal 10000 for non-compute jobs and 60000 for compute jobs; "
 		"for passthrough or sriov, 10000 for all jobs."
 		" 0: keep default value. negative: infinity timeout), "
 		"format: for bare metal [Non-Compute] or [GFX,Compute,SDMA,Video]; "
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 016/189] drm/amd/display: Fix clock table filling logic

[Sasha Levin]

From: Ilya Bakoulin <Ilya.Bakoulin@amd.com>

[ Upstream commit c31bef1cb1203b26f901a511a3246204cfaf8a57 ]

[Why]
Currently, the code that fills the clock table can miss filling
information about some of the higher voltage states advertised
by the SMU. This, in turn, may cause some of the higher pixel clock
modes (e.g. 8k60) to fail validation.

[How]
Fill the table with one entry per DCFCLK level instead of one entry
per FCLK level. This is needed because the maximum FCLK does not
necessarily need maximum voltage, whereas DCFCLK values from SMU
cover the full voltage range.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 80 ++++++++++++-------
 .../drm/amd/display/dc/dcn21/dcn21_resource.c | 33 +++++---
 2 files changed, 74 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index 49d19fdd750b..1f56ceab5922 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -834,46 +834,67 @@ static struct wm_table lpddr4_wm_table_rn = {
 		},
 	}
 };
-static unsigned int find_socclk_for_voltage(struct dpm_clocks *clock_table, unsigned int voltage)
+
+static unsigned int find_max_fclk_for_voltage(struct dpm_clocks *clock_table,
+		unsigned int voltage)
 {
 	int i;
+	uint32_t max_clk = 0;
 
-	for (i = 0; i < PP_SMU_NUM_SOCCLK_DPM_LEVELS; i++) {
-		if (clock_table->SocClocks[i].Vol == voltage)
-			return clock_table->SocClocks[i].Freq;
+	for (i = 0; i < PP_SMU_NUM_FCLK_DPM_LEVELS; i++) {
+		if (clock_table->FClocks[i].Vol <= voltage) {
+			max_clk = clock_table->FClocks[i].Freq > max_clk ?
+				clock_table->FClocks[i].Freq : max_clk;
+		}
 	}
 
-	ASSERT(0);
-	return 0;
+	return max_clk;
 }
-static unsigned int find_dcfclk_for_voltage(struct dpm_clocks *clock_table, unsigned int voltage)
+
+static unsigned int find_max_memclk_for_voltage(struct dpm_clocks *clock_table,
+		unsigned int voltage)
 {
 	int i;
+	uint32_t max_clk = 0;
 
-	for (i = 0; i < PP_SMU_NUM_DCFCLK_DPM_LEVELS; i++) {
-		if (clock_table->DcfClocks[i].Vol == voltage)
-			return clock_table->DcfClocks[i].Freq;
+	for (i = 0; i < PP_SMU_NUM_MEMCLK_DPM_LEVELS; i++) {
+		if (clock_table->MemClocks[i].Vol <= voltage) {
+			max_clk = clock_table->MemClocks[i].Freq > max_clk ?
+				clock_table->MemClocks[i].Freq : max_clk;
+		}
 	}
 
-	ASSERT(0);
-	return 0;
+	return max_clk;
+}
+
+static unsigned int find_max_socclk_for_voltage(struct dpm_clocks *clock_table,
+		unsigned int voltage)
+{
+	int i;
+	uint32_t max_clk = 0;
+
+	for (i = 0; i < PP_SMU_NUM_SOCCLK_DPM_LEVELS; i++) {
+		if (clock_table->SocClocks[i].Vol <= voltage) {
+			max_clk = clock_table->SocClocks[i].Freq > max_clk ?
+				clock_table->SocClocks[i].Freq : max_clk;
+		}
+	}
+
+	return max_clk;
 }
 
 static void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params, struct dpm_clocks *clock_table, struct integrated_info *bios_info)
 {
 	int i, j = 0;
+	unsigned int volt;
 
 	j = -1;
 
-	ASSERT(PP_SMU_NUM_FCLK_DPM_LEVELS <= MAX_NUM_DPM_LVL);
-
-	/* Find lowest DPM, FCLK is filled in reverse order*/
-
-	for (i = PP_SMU_NUM_FCLK_DPM_LEVELS - 1; i >= 0; i--) {
-		if (clock_table->FClocks[i].Freq != 0 && clock_table->FClocks[i].Vol != 0) {
+	/* Find max DPM */
+	for (i = 0; i < PP_SMU_NUM_DCFCLK_DPM_LEVELS; ++i) {
+		if (clock_table->DcfClocks[i].Freq != 0 &&
+				clock_table->DcfClocks[i].Vol != 0)
 			j = i;
-			break;
-		}
 	}
 
 	if (j == -1) {
@@ -884,13 +905,18 @@ static void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params
 
 	bw_params->clk_table.num_entries = j + 1;
 
-	for (i = 0; i < bw_params->clk_table.num_entries; i++, j--) {
-		bw_params->clk_table.entries[i].fclk_mhz = clock_table->FClocks[j].Freq;
-		bw_params->clk_table.entries[i].memclk_mhz = clock_table->MemClocks[j].Freq;
-		bw_params->clk_table.entries[i].voltage = clock_table->FClocks[j].Vol;
-		bw_params->clk_table.entries[i].dcfclk_mhz = find_dcfclk_for_voltage(clock_table, clock_table->FClocks[j].Vol);
-		bw_params->clk_table.entries[i].socclk_mhz = find_socclk_for_voltage(clock_table,
-									bw_params->clk_table.entries[i].voltage);
+	for (i = 0; i < bw_params->clk_table.num_entries; i++) {
+		volt = clock_table->DcfClocks[i].Vol;
+
+		bw_params->clk_table.entries[i].voltage = volt;
+		bw_params->clk_table.entries[i].dcfclk_mhz =
+			clock_table->DcfClocks[i].Freq;
+		bw_params->clk_table.entries[i].fclk_mhz =
+			find_max_fclk_for_voltage(clock_table, volt);
+		bw_params->clk_table.entries[i].memclk_mhz =
+			find_max_memclk_for_voltage(clock_table, volt);
+		bw_params->clk_table.entries[i].socclk_mhz =
+			find_max_socclk_for_voltage(clock_table, volt);
 	}
 
 	bw_params->vram_type = bios_info->memory_type;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 8e3f1d0b4cc3..38a2aa87f5f5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -1575,10 +1575,12 @@ static struct _vcs_dpi_voltage_scaling_st construct_low_pstate_lvl(struct clk_li
 	low_pstate_lvl.phyclk_d18_mhz = dcn2_1_soc.clock_limits[high_voltage_lvl].phyclk_d18_mhz;
 	low_pstate_lvl.phyclk_mhz = dcn2_1_soc.clock_limits[high_voltage_lvl].phyclk_mhz;
 
-	for (i = clk_table->num_entries; i > 1; i--)
-		clk_table->entries[i] = clk_table->entries[i-1];
-	clk_table->entries[1] = clk_table->entries[0];
-	clk_table->num_entries++;
+	if (clk_table->num_entries < MAX_NUM_DPM_LVL) {
+		for (i = clk_table->num_entries; i > 1; i--)
+			clk_table->entries[i] = clk_table->entries[i-1];
+		clk_table->entries[1] = clk_table->entries[0];
+		clk_table->num_entries++;
+	}
 
 	return low_pstate_lvl;
 }
@@ -1610,10 +1612,6 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 			}
 		}
 
-		/* clk_table[1] is reserved for min DF PState.  skip here to fill in later. */
-		if (i == 1)
-			k++;
-
 		clock_limits[k].state = k;
 		clock_limits[k].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
 		clock_limits[k].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
@@ -1630,14 +1628,25 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 
 		k++;
 	}
-	for (i = 0; i < clk_table->num_entries + 1; i++)
-		dcn2_1_soc.clock_limits[i] = clock_limits[i];
+
+	if (clk_table->num_entries >= MAX_NUM_DPM_LVL) {
+		for (i = 0; i < clk_table->num_entries + 1; i++)
+			dcn2_1_soc.clock_limits[i] = clock_limits[i];
+	} else {
+		dcn2_1_soc.clock_limits[0] = clock_limits[0];
+		for (i = 2; i < clk_table->num_entries + 1; i++) {
+			dcn2_1_soc.clock_limits[i] = clock_limits[i - 1];
+			dcn2_1_soc.clock_limits[i].state = i;
+		}
+	}
+
 	if (clk_table->num_entries) {
-		dcn2_1_soc.num_states = clk_table->num_entries + 1;
 		/* fill in min DF PState */
 		dcn2_1_soc.clock_limits[1] = construct_low_pstate_lvl(clk_table, closest_clk_lvl);
+		dcn2_1_soc.num_states = clk_table->num_entries;
 		/* duplicate last level */
-		dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] = dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
+		dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] =
+			dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
 		dcn2_1_soc.clock_limits[dcn2_1_soc.num_states].state = dcn2_1_soc.num_states;
 	}
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 017/189] drm/amd/display: fix use_max_lb flag for 420 pixel formats

[Sasha Levin]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 8809a7a4afe90ad9ffb42f72154d27e7c47551ae ]

Right now the flag simply selects memory config 0 when flag is true
however 420 modes benefit more from memory config 3.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
index efa86d5c6847..98ab4b776924 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
@@ -496,10 +496,13 @@ static enum lb_memory_config dpp1_dscl_find_lb_memory_config(struct dcn10_dpp *d
 	int vtaps_c = scl_data->taps.v_taps_c;
 	int ceil_vratio = dc_fixpt_ceil(scl_data->ratios.vert);
 	int ceil_vratio_c = dc_fixpt_ceil(scl_data->ratios.vert_c);
-	enum lb_memory_config mem_cfg = LB_MEMORY_CONFIG_0;
 
-	if (dpp->base.ctx->dc->debug.use_max_lb)
-		return mem_cfg;
+	if (dpp->base.ctx->dc->debug.use_max_lb) {
+		if (scl_data->format == PIXEL_FORMAT_420BPP8
+				|| scl_data->format == PIXEL_FORMAT_420BPP10)
+			return LB_MEMORY_CONFIG_3;
+		return LB_MEMORY_CONFIG_0;
+	}
 
 	dpp->base.caps->dscl_calc_lb_num_partitions(
 			scl_data, LB_MEMORY_CONFIG_1, &num_part_y, &num_part_c);
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 037/189] drm/amdgpu/display: restore the backlight on modeset (v2)

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 7230362c78d441020a47d7d5ca81f8a3d07bd9f0 ]

To stay consistent with the user's setting.

v2: rebase on multi-eDP support

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 875fd187463e..62663e287b21 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -8967,6 +8967,12 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
 	/* Update audio instances for each connector. */
 	amdgpu_dm_commit_audio(dev, state);
 
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) ||		\
+	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
+	/* restore the backlight level */
+	if (dm->backlight_dev)
+		amdgpu_dm_backlight_set_level(dm, dm->brightness[0]);
+#endif
 	/*
 	 * send vblank event on all events not handled in flip and
 	 * mark consumed event for drm_atomic_helper_commit_hw_done
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 042/189] drm/amd/pm: fix return value in aldebaran_set_mp1_state()

[Sasha Levin]

From: Feifei Xu <Feifei.Xu@amd.com>

[ Upstream commit 5051cb794ac5d92154e186d87cdc12cba613f4f6 ]

For default cases,we should return 0. Otherwise resume will
abort because of the wrong return value.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index dcbe3a72da09..16ad4683eb69 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1779,10 +1779,8 @@ static int aldebaran_set_mp1_state(struct smu_context *smu,
 	case PP_MP1_STATE_UNLOAD:
 		return smu_cmn_set_mp1_state(smu, mp1_state);
 	default:
-		return -EINVAL;
+		return 0;
 	}
-
-	return 0;
 }
 
 static const struct pptable_funcs aldebaran_ppt_funcs = {
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 050/189] drm/amd/display: fix odm scaling

[Sasha Levin]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 6566cae7aef30da8833f1fa0eb854baf33b96676 ]

There are two issues with scaling calculations, odm recout
calculation and matching viewport to actual recout.

This change fixes both issues. Odm recout calculation via
special casing and viewport matching issue by reworking
the viewport calcualtion to use scaling ratios and recout
to derrive the required offset and size.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/core/dc_resource.c | 568 +++++++-----------
 drivers/gpu/drm/amd/display/dc/dc_types.h     |   5 -
 .../drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c |  12 +-
 .../drm/amd/display/dc/dcn20/dcn20_resource.c |  14 +-
 .../amd/display/dc/dml/display_mode_structs.h |   2 +
 .../drm/amd/display/dc/dml/display_mode_vba.c |  13 +
 .../gpu/drm/amd/display/dc/inc/hw/transform.h |   4 -
 7 files changed, 232 insertions(+), 386 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index 8cb937c046aa..78278a10d899 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -695,124 +695,23 @@ static void calculate_split_count_and_index(struct pipe_ctx *pipe_ctx, int *spli
 	}
 }
 
-static void calculate_viewport(struct pipe_ctx *pipe_ctx)
+/*
+ * This is a preliminary vp size calculation to allow us to check taps support.
+ * The result is completely overridden afterwards.
+ */
+static void calculate_viewport_size(struct pipe_ctx *pipe_ctx)
 {
-	const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
-	const struct dc_stream_state *stream = pipe_ctx->stream;
 	struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
-	struct rect surf_src = plane_state->src_rect;
-	struct rect clip, dest;
-	int vpc_div = (data->format == PIXEL_FORMAT_420BPP8
-			|| data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
-	int split_count = 0;
-	int split_idx = 0;
-	bool orthogonal_rotation, flip_y_start, flip_x_start;
-
-	calculate_split_count_and_index(pipe_ctx, &split_count, &split_idx);
 
-	if (stream->view_format == VIEW_3D_FORMAT_SIDE_BY_SIDE ||
-		stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM) {
-		split_count = 0;
-		split_idx = 0;
-	}
-
-	/* The actual clip is an intersection between stream
-	 * source and surface clip
-	 */
-	dest = plane_state->dst_rect;
-	clip.x = stream->src.x > plane_state->clip_rect.x ?
-			stream->src.x : plane_state->clip_rect.x;
-
-	clip.width = stream->src.x + stream->src.width <
-			plane_state->clip_rect.x + plane_state->clip_rect.width ?
-			stream->src.x + stream->src.width - clip.x :
-			plane_state->clip_rect.x + plane_state->clip_rect.width - clip.x ;
-
-	clip.y = stream->src.y > plane_state->clip_rect.y ?
-			stream->src.y : plane_state->clip_rect.y;
-
-	clip.height = stream->src.y + stream->src.height <
-			plane_state->clip_rect.y + plane_state->clip_rect.height ?
-			stream->src.y + stream->src.height - clip.y :
-			plane_state->clip_rect.y + plane_state->clip_rect.height - clip.y ;
-
-	/*
-	 * Need to calculate how scan origin is shifted in vp space
-	 * to correctly rotate clip and dst
-	 */
-	get_vp_scan_direction(
-			plane_state->rotation,
-			plane_state->horizontal_mirror,
-			&orthogonal_rotation,
-			&flip_y_start,
-			&flip_x_start);
-
-	if (orthogonal_rotation) {
-		swap(clip.x, clip.y);
-		swap(clip.width, clip.height);
-		swap(dest.x, dest.y);
-		swap(dest.width, dest.height);
-	}
-	if (flip_x_start) {
-		clip.x = dest.x + dest.width - clip.x - clip.width;
-		dest.x = 0;
-	}
-	if (flip_y_start) {
-		clip.y = dest.y + dest.height - clip.y - clip.height;
-		dest.y = 0;
-	}
-
-	/* offset = surf_src.ofs + (clip.ofs - surface->dst_rect.ofs) * scl_ratio
-	 * num_pixels = clip.num_pix * scl_ratio
-	 */
-	data->viewport.x = surf_src.x + (clip.x - dest.x) * surf_src.width / dest.width;
-	data->viewport.width = clip.width * surf_src.width / dest.width;
-
-	data->viewport.y = surf_src.y + (clip.y - dest.y) * surf_src.height / dest.height;
-	data->viewport.height = clip.height * surf_src.height / dest.height;
-
-	/* Handle split */
-	if (split_count) {
-		/* extra pixels in the division remainder need to go to pipes after
-		 * the extra pixel index minus one(epimo) defined here as:
-		 */
-		int epimo = 0;
-
-		if (orthogonal_rotation) {
-			if (flip_y_start)
-				split_idx = split_count - split_idx;
-
-			epimo = split_count - data->viewport.height % (split_count + 1);
-
-			data->viewport.y += (data->viewport.height / (split_count + 1)) * split_idx;
-			if (split_idx > epimo)
-				data->viewport.y += split_idx - epimo - 1;
-			data->viewport.height = data->viewport.height / (split_count + 1) + (split_idx > epimo ? 1 : 0);
-		} else {
-			if (flip_x_start)
-				split_idx = split_count - split_idx;
-
-			epimo = split_count - data->viewport.width % (split_count + 1);
-
-			data->viewport.x += (data->viewport.width / (split_count + 1)) * split_idx;
-			if (split_idx > epimo)
-				data->viewport.x += split_idx - epimo - 1;
-			data->viewport.width = data->viewport.width / (split_count + 1) + (split_idx > epimo ? 1 : 0);
-		}
+	data->viewport.width = dc_fixpt_ceil(dc_fixpt_mul_int(data->ratios.horz, data->recout.width));
+	data->viewport.height = dc_fixpt_ceil(dc_fixpt_mul_int(data->ratios.vert, data->recout.height));
+	data->viewport_c.width = dc_fixpt_ceil(dc_fixpt_mul_int(data->ratios.horz_c, data->recout.width));
+	data->viewport_c.height = dc_fixpt_ceil(dc_fixpt_mul_int(data->ratios.vert_c, data->recout.height));
+	if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 ||
+			pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) {
+		swap(data->viewport.width, data->viewport.height);
+		swap(data->viewport_c.width, data->viewport_c.height);
 	}
-
-	/* Round down, compensate in init */
-	data->viewport_c.x = data->viewport.x / vpc_div;
-	data->viewport_c.y = data->viewport.y / vpc_div;
-	data->inits.h_c = (data->viewport.x % vpc_div) != 0 ? dc_fixpt_half : dc_fixpt_zero;
-	data->inits.v_c = (data->viewport.y % vpc_div) != 0 ? dc_fixpt_half : dc_fixpt_zero;
-
-	/* Round up, assume original video size always even dimensions */
-	data->viewport_c.width = (data->viewport.width + vpc_div - 1) / vpc_div;
-	data->viewport_c.height = (data->viewport.height + vpc_div - 1) / vpc_div;
-
-	data->viewport_unadjusted = data->viewport;
-	data->viewport_c_unadjusted = data->viewport_c;
 }
 
 static void calculate_recout(struct pipe_ctx *pipe_ctx)
@@ -821,26 +720,21 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx)
 	const struct dc_stream_state *stream = pipe_ctx->stream;
 	struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
 	struct rect surf_clip = plane_state->clip_rect;
-	bool pri_split_tb = pipe_ctx->bottom_pipe &&
-			pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state &&
-			stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
-	bool sec_split_tb = pipe_ctx->top_pipe &&
-			pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state &&
-			stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
-	int split_count = 0;
-	int split_idx = 0;
+	bool split_tb = stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM;
+	int split_count, split_idx;
 
 	calculate_split_count_and_index(pipe_ctx, &split_count, &split_idx);
+	if (stream->view_format == VIEW_3D_FORMAT_SIDE_BY_SIDE)
+		split_idx = 0;
 
 	/*
 	 * Only the leftmost ODM pipe should be offset by a nonzero distance
 	 */
-	if (!pipe_ctx->prev_odm_pipe) {
+	if (!pipe_ctx->prev_odm_pipe || split_idx == split_count) {
 		data->recout.x = stream->dst.x;
 		if (stream->src.x < surf_clip.x)
 			data->recout.x += (surf_clip.x - stream->src.x) * stream->dst.width
 						/ stream->src.width;
-
 	} else
 		data->recout.x = 0;
 
@@ -861,26 +755,31 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx)
 	if (data->recout.height + data->recout.y > stream->dst.y + stream->dst.height)
 		data->recout.height = stream->dst.y + stream->dst.height - data->recout.y;
 
-	/* Handle h & v split, handle rotation using viewport */
-	if (sec_split_tb) {
-		data->recout.y += data->recout.height / 2;
-		/* Floor primary pipe, ceil 2ndary pipe */
-		data->recout.height = (data->recout.height + 1) / 2;
-	} else if (pri_split_tb)
+	/* Handle h & v split */
+	if (split_tb) {
+		ASSERT(data->recout.height % 2 == 0);
 		data->recout.height /= 2;
-	else if (split_count) {
-		/* extra pixels in the division remainder need to go to pipes after
-		 * the extra pixel index minus one(epimo) defined here as:
-		 */
-		int epimo = split_count - data->recout.width % (split_count + 1);
-
-		/*no recout offset due to odm */
+	} else if (split_count) {
 		if (!pipe_ctx->next_odm_pipe && !pipe_ctx->prev_odm_pipe) {
+			/* extra pixels in the division remainder need to go to pipes after
+			 * the extra pixel index minus one(epimo) defined here as:
+			 */
+			int epimo = split_count - data->recout.width % (split_count + 1);
+
 			data->recout.x += (data->recout.width / (split_count + 1)) * split_idx;
 			if (split_idx > epimo)
 				data->recout.x += split_idx - epimo - 1;
+			ASSERT(stream->view_format != VIEW_3D_FORMAT_SIDE_BY_SIDE || data->recout.width % 2 == 0);
+			data->recout.width = data->recout.width / (split_count + 1) + (split_idx > epimo ? 1 : 0);
+		} else {
+			/* odm */
+			if (split_idx == split_count) {
+				/* rightmost pipe is the remainder recout */
+				data->recout.width -= data->h_active * split_count - data->recout.x;
+				data->recout.x = 0;
+			} else
+				data->recout.width = data->h_active - data->recout.x;
 		}
-		data->recout.width = data->recout.width / (split_count + 1) + (split_idx > epimo ? 1 : 0);
 	}
 }
 
@@ -934,9 +833,15 @@ static void calculate_scaling_ratios(struct pipe_ctx *pipe_ctx)
 			pipe_ctx->plane_res.scl_data.ratios.vert_c, 19);
 }
 
-static inline void adjust_vp_and_init_for_seamless_clip(
+
+/*
+ * We completely calculate vp offset, size and inits here based entirely on scaling
+ * ratios and recout for pixel perfect pipe combine.
+ */
+static void calculate_init_and_vp(
 		bool flip_scan_dir,
-		int recout_skip,
+		int recout_offset_within_recout_full,
+		int recout_size,
 		int src_size,
 		int taps,
 		struct fixed31_32 ratio,
@@ -944,91 +849,87 @@ static inline void adjust_vp_and_init_for_seamless_clip(
 		int *vp_offset,
 		int *vp_size)
 {
-	if (!flip_scan_dir) {
-		/* Adjust for viewport end clip-off */
-		if ((*vp_offset + *vp_size) < src_size) {
-			int vp_clip = src_size - *vp_size - *vp_offset;
-			int int_part = dc_fixpt_floor(dc_fixpt_sub(*init, ratio));
-
-			int_part = int_part > 0 ? int_part : 0;
-			*vp_size += int_part < vp_clip ? int_part : vp_clip;
-		}
-
-		/* Adjust for non-0 viewport offset */
-		if (*vp_offset) {
-			int int_part;
-
-			*init = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_skip));
-			int_part = dc_fixpt_floor(*init) - *vp_offset;
-			if (int_part < taps) {
-				int int_adj = *vp_offset >= (taps - int_part) ?
-							(taps - int_part) : *vp_offset;
-				*vp_offset -= int_adj;
-				*vp_size += int_adj;
-				int_part += int_adj;
-			} else if (int_part > taps) {
-				*vp_offset += int_part - taps;
-				*vp_size -= int_part - taps;
-				int_part = taps;
-			}
-			init->value &= 0xffffffff;
-			*init = dc_fixpt_add_int(*init, int_part);
-		}
-	} else {
-		/* Adjust for non-0 viewport offset */
-		if (*vp_offset) {
-			int int_part = dc_fixpt_floor(dc_fixpt_sub(*init, ratio));
-
-			int_part = int_part > 0 ? int_part : 0;
-			*vp_size += int_part < *vp_offset ? int_part : *vp_offset;
-			*vp_offset -= int_part < *vp_offset ? int_part : *vp_offset;
-		}
+	struct fixed31_32 temp;
+	int int_part;
 
-		/* Adjust for viewport end clip-off */
-		if ((*vp_offset + *vp_size) < src_size) {
-			int int_part;
-			int end_offset = src_size - *vp_offset - *vp_size;
-
-			/*
-			 * this is init if vp had no offset, keep in mind this is from the
-			 * right side of vp due to scan direction
-			 */
-			*init = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_skip));
-			/*
-			 * this is the difference between first pixel of viewport available to read
-			 * and init position, takning into account scan direction
-			 */
-			int_part = dc_fixpt_floor(*init) - end_offset;
-			if (int_part < taps) {
-				int int_adj = end_offset >= (taps - int_part) ?
-							(taps - int_part) : end_offset;
-				*vp_size += int_adj;
-				int_part += int_adj;
-			} else if (int_part > taps) {
-				*vp_size += int_part - taps;
-				int_part = taps;
-			}
-			init->value &= 0xffffffff;
-			*init = dc_fixpt_add_int(*init, int_part);
-		}
+	/*
+	 * First of the taps starts sampling pixel number <init_int_part> corresponding to recout
+	 * pixel 1. Next recout pixel samples int part of <init + scaling ratio> and so on.
+	 * All following calculations are based on this logic.
+	 *
+	 * Init calculated according to formula:
+	 * 	init = (scaling_ratio + number_of_taps + 1) / 2
+	 * 	init_bot = init + scaling_ratio
+	 * 	to get pixel perfect combine add the fraction from calculating vp offset
+	 */
+	temp = dc_fixpt_mul_int(ratio, recout_offset_within_recout_full);
+	*vp_offset = dc_fixpt_floor(temp);
+	temp.value &= 0xffffffff;
+	*init = dc_fixpt_truncate(dc_fixpt_add(dc_fixpt_div_int(
+			dc_fixpt_add_int(ratio, taps + 1), 2), temp), 19);
+	/*
+	 * If viewport has non 0 offset and there are more taps than covered by init then
+	 * we should decrease the offset and increase init so we are never sampling
+	 * outside of viewport.
+	 */
+	int_part = dc_fixpt_floor(*init);
+	if (int_part < taps) {
+		int_part = taps - int_part;
+		if (int_part > *vp_offset)
+			int_part = *vp_offset;
+		*vp_offset -= int_part;
+		*init = dc_fixpt_add_int(*init, int_part);
 	}
+	/*
+	 * If taps are sampling outside of viewport at end of recout and there are more pixels
+	 * available in the surface we should increase the viewport size, regardless set vp to
+	 * only what is used.
+	 */
+	temp = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_size - 1));
+	*vp_size = dc_fixpt_floor(temp);
+	if (*vp_size + *vp_offset > src_size)
+		*vp_size = src_size - *vp_offset;
+
+	/* We did all the math assuming we are scanning same direction as display does,
+	 * however mirror/rotation changes how vp scans vs how it is offset. If scan direction
+	 * is flipped we simply need to calculate offset from the other side of plane.
+	 * Note that outside of viewport all scaling hardware works in recout space.
+	 */
+	if (flip_scan_dir)
+		*vp_offset = src_size - *vp_offset - *vp_size;
 }
 
-static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx)
+static void calculate_inits_and_viewports(struct pipe_ctx *pipe_ctx)
 {
 	const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	const struct dc_stream_state *stream = pipe_ctx->stream;
-	struct pipe_ctx *odm_pipe = pipe_ctx;
 	struct scaler_data *data = &pipe_ctx->plane_res.scl_data;
-	struct rect src = pipe_ctx->plane_state->src_rect;
-	int recout_skip_h, recout_skip_v, surf_size_h, surf_size_v;
+	struct rect src = plane_state->src_rect;
 	int vpc_div = (data->format == PIXEL_FORMAT_420BPP8
-			|| data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
+				|| data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1;
+	int split_count, split_idx, ro_lb, ro_tb, recout_full_x, recout_full_y;
 	bool orthogonal_rotation, flip_vert_scan_dir, flip_horz_scan_dir;
-	int odm_idx = 0;
 
+	calculate_split_count_and_index(pipe_ctx, &split_count, &split_idx);
 	/*
-	 * Need to calculate the scan direction for viewport to make adjustments
+	 * recout full is what the recout would have been if we didnt clip
+	 * the source plane at all. We only care about left(ro_lb) and top(ro_tb)
+	 * offsets of recout within recout full because those are the directions
+	 * we scan from and therefore the only ones that affect inits.
+	 */
+	recout_full_x = stream->dst.x + (plane_state->dst_rect.x - stream->src.x)
+			* stream->dst.width / stream->src.width;
+	recout_full_y = stream->dst.y + (plane_state->dst_rect.y - stream->src.y)
+			* stream->dst.height / stream->src.height;
+	if (pipe_ctx->prev_odm_pipe && split_idx)
+		ro_lb = data->h_active * split_idx - recout_full_x;
+	else
+		ro_lb = data->recout.x - recout_full_x;
+	ro_tb = data->recout.y - recout_full_y;
+	ASSERT(ro_lb >= 0 && ro_tb >= 0);
+
+	/*
+	 * Work in recout rotation since that requires less transformations
 	 */
 	get_vp_scan_direction(
 			plane_state->rotation,
@@ -1037,145 +938,62 @@ static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx)
 			&flip_vert_scan_dir,
 			&flip_horz_scan_dir);
 
-	/* Calculate src rect rotation adjusted to recout space */
-	surf_size_h = src.x + src.width;
-	surf_size_v = src.y + src.height;
-	if (flip_horz_scan_dir)
-		src.x = 0;
-	if (flip_vert_scan_dir)
-		src.y = 0;
 	if (orthogonal_rotation) {
-		swap(src.x, src.y);
 		swap(src.width, src.height);
+		swap(flip_vert_scan_dir, flip_horz_scan_dir);
 	}
 
-	/*modified recout_skip_h calculation due to odm having no recout offset*/
-	while (odm_pipe->prev_odm_pipe) {
-		odm_idx++;
-		odm_pipe = odm_pipe->prev_odm_pipe;
-	}
-	/*odm_pipe is the leftmost pipe in the ODM group*/
-	recout_skip_h = odm_idx * data->recout.width;
-
-	/* Recout matching initial vp offset = recout_offset - (stream dst offset +
-	 *			((surf dst offset - stream src offset) * 1/ stream scaling ratio)
-	 *			- (surf surf_src offset * 1/ full scl ratio))
-	 */
-	recout_skip_h += odm_pipe->plane_res.scl_data.recout.x
-				- (stream->dst.x + (plane_state->dst_rect.x - stream->src.x)
-					* stream->dst.width / stream->src.width -
-					src.x * plane_state->dst_rect.width / src.width
-					* stream->dst.width / stream->src.width);
-
-
-	recout_skip_v = data->recout.y - (stream->dst.y + (plane_state->dst_rect.y - stream->src.y)
-					* stream->dst.height / stream->src.height -
-					src.y * plane_state->dst_rect.height / src.height
-					* stream->dst.height / stream->src.height);
-	if (orthogonal_rotation)
-		swap(recout_skip_h, recout_skip_v);
-	/*
-	 * Init calculated according to formula:
-	 * 	init = (scaling_ratio + number_of_taps + 1) / 2
-	 * 	init_bot = init + scaling_ratio
-	 * 	init_c = init + truncated_vp_c_offset(from calculate viewport)
-	 */
-	data->inits.h = dc_fixpt_truncate(dc_fixpt_div_int(
-			dc_fixpt_add_int(data->ratios.horz, data->taps.h_taps + 1), 2), 19);
-
-	data->inits.h_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.h_c, dc_fixpt_div_int(
-			dc_fixpt_add_int(data->ratios.horz_c, data->taps.h_taps_c + 1), 2)), 19);
-
-	data->inits.v = dc_fixpt_truncate(dc_fixpt_div_int(
-			dc_fixpt_add_int(data->ratios.vert, data->taps.v_taps + 1), 2), 19);
-
-	data->inits.v_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.v_c, dc_fixpt_div_int(
-			dc_fixpt_add_int(data->ratios.vert_c, data->taps.v_taps_c + 1), 2)), 19);
-
-	/*
-	 * Taps, inits and scaling ratios are in recout space need to rotate
-	 * to viewport rotation before adjustment
-	 */
-	adjust_vp_and_init_for_seamless_clip(
+	calculate_init_and_vp(
 			flip_horz_scan_dir,
-			recout_skip_h,
-			surf_size_h,
-			orthogonal_rotation ? data->taps.v_taps : data->taps.h_taps,
-			orthogonal_rotation ? data->ratios.vert : data->ratios.horz,
-			orthogonal_rotation ? &data->inits.v : &data->inits.h,
+			ro_lb,
+			data->recout.width,
+			src.width,
+			data->taps.h_taps,
+			data->ratios.horz,
+			&data->inits.h,
 			&data->viewport.x,
 			&data->viewport.width);
-	adjust_vp_and_init_for_seamless_clip(
+	calculate_init_and_vp(
 			flip_horz_scan_dir,
-			recout_skip_h,
-			surf_size_h / vpc_div,
-			orthogonal_rotation ? data->taps.v_taps_c : data->taps.h_taps_c,
-			orthogonal_rotation ? data->ratios.vert_c : data->ratios.horz_c,
-			orthogonal_rotation ? &data->inits.v_c : &data->inits.h_c,
+			ro_lb,
+			data->recout.width,
+			src.width / vpc_div,
+			data->taps.h_taps_c,
+			data->ratios.horz_c,
+			&data->inits.h_c,
 			&data->viewport_c.x,
 			&data->viewport_c.width);
-	adjust_vp_and_init_for_seamless_clip(
+	calculate_init_and_vp(
 			flip_vert_scan_dir,
-			recout_skip_v,
-			surf_size_v,
-			orthogonal_rotation ? data->taps.h_taps : data->taps.v_taps,
-			orthogonal_rotation ? data->ratios.horz : data->ratios.vert,
-			orthogonal_rotation ? &data->inits.h : &data->inits.v,
+			ro_tb,
+			data->recout.height,
+			src.height,
+			data->taps.v_taps,
+			data->ratios.vert,
+			&data->inits.v,
 			&data->viewport.y,
 			&data->viewport.height);
-	adjust_vp_and_init_for_seamless_clip(
+	calculate_init_and_vp(
 			flip_vert_scan_dir,
-			recout_skip_v,
-			surf_size_v / vpc_div,
-			orthogonal_rotation ? data->taps.h_taps_c : data->taps.v_taps_c,
-			orthogonal_rotation ? data->ratios.horz_c : data->ratios.vert_c,
-			orthogonal_rotation ? &data->inits.h_c : &data->inits.v_c,
+			ro_tb,
+			data->recout.height,
+			src.height / vpc_div,
+			data->taps.v_taps_c,
+			data->ratios.vert_c,
+			&data->inits.v_c,
 			&data->viewport_c.y,
 			&data->viewport_c.height);
-
-	/* Interlaced inits based on final vert inits */
-	data->inits.v_bot = dc_fixpt_add(data->inits.v, data->ratios.vert);
-	data->inits.v_c_bot = dc_fixpt_add(data->inits.v_c, data->ratios.vert_c);
-
-}
-
-/*
- * When handling 270 rotation in mixed SLS mode, we have
- * stream->timing.h_border_left that is non zero.  If we are doing
- * pipe-splitting, this h_border_left value gets added to recout.x and when it
- * calls calculate_inits_and_adj_vp() and
- * adjust_vp_and_init_for_seamless_clip(), it can cause viewport.height for a
- * pipe to be incorrect.
- *
- * To fix this, instead of using stream->timing.h_border_left, we can use
- * stream->dst.x to represent the border instead.  So we will set h_border_left
- * to 0 and shift the appropriate amount in stream->dst.x.  We will then
- * perform all calculations in resource_build_scaling_params() based on this
- * and then restore the h_border_left and stream->dst.x to their original
- * values.
- *
- * shift_border_left_to_dst() will shift the amount of h_border_left to
- * stream->dst.x and set h_border_left to 0.  restore_border_left_from_dst()
- * will restore h_border_left and stream->dst.x back to their original values
- * We also need to make sure pipe_ctx->plane_res.scl_data.h_active uses the
- * original h_border_left value in its calculation.
- */
-static int shift_border_left_to_dst(struct pipe_ctx *pipe_ctx)
-{
-	int store_h_border_left = pipe_ctx->stream->timing.h_border_left;
-
-	if (store_h_border_left) {
-		pipe_ctx->stream->timing.h_border_left = 0;
-		pipe_ctx->stream->dst.x += store_h_border_left;
+	if (orthogonal_rotation) {
+		swap(data->viewport.x, data->viewport.y);
+		swap(data->viewport.width, data->viewport.height);
+		swap(data->viewport_c.x, data->viewport_c.y);
+		swap(data->viewport_c.width, data->viewport_c.height);
 	}
-	return store_h_border_left;
-}
-
-static void restore_border_left_from_dst(struct pipe_ctx *pipe_ctx,
-					 int store_h_border_left)
-{
-	pipe_ctx->stream->dst.x -= store_h_border_left;
-	pipe_ctx->stream->timing.h_border_left = store_h_border_left;
+	data->viewport.x += src.x;
+	data->viewport.y += src.y;
+	ASSERT(src.x % vpc_div == 0 && src.y % vpc_div == 0);
+	data->viewport_c.x += src.x / vpc_div;
+	data->viewport_c.y += src.y / vpc_div;
 }
 
 bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
@@ -1183,48 +1001,42 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
 	const struct dc_plane_state *plane_state = pipe_ctx->plane_state;
 	struct dc_crtc_timing *timing = &pipe_ctx->stream->timing;
 	bool res = false;
-	int store_h_border_left = shift_border_left_to_dst(pipe_ctx);
 	DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger);
-	/* Important: scaling ratio calculation requires pixel format,
-	 * lb depth calculation requires recout and taps require scaling ratios.
-	 * Inits require viewport, taps, ratios and recout of split pipe
-	 */
+
 	pipe_ctx->plane_res.scl_data.format = convert_pixel_format_to_dalsurface(
 			pipe_ctx->plane_state->format);
 
-	calculate_scaling_ratios(pipe_ctx);
-
-	calculate_viewport(pipe_ctx);
+	/* Timing borders are part of vactive that we are also supposed to skip in addition
+	 * to any stream dst offset. Since dm logic assumes dst is in addressable
+	 * space we need to add the the left and top borders to dst offsets temporarily.
+	 * TODO: fix in DM, stream dst is supposed to be in vactive
+	 */
+	pipe_ctx->stream->dst.x += timing->h_border_left;
+	pipe_ctx->stream->dst.y += timing->v_border_top;
 
-	if (pipe_ctx->plane_res.scl_data.viewport.height < MIN_VIEWPORT_SIZE ||
-		pipe_ctx->plane_res.scl_data.viewport.width < MIN_VIEWPORT_SIZE) {
-		if (store_h_border_left) {
-			restore_border_left_from_dst(pipe_ctx,
-				store_h_border_left);
-		}
-		return false;
-	}
+	/* Calculate H and V active size */
+	pipe_ctx->plane_res.scl_data.h_active = timing->h_addressable +
+			timing->h_border_left + timing->h_border_right;
+	pipe_ctx->plane_res.scl_data.v_active = timing->v_addressable +
+		timing->v_border_top + timing->v_border_bottom;
+	if (pipe_ctx->next_odm_pipe || pipe_ctx->prev_odm_pipe)
+		pipe_ctx->plane_res.scl_data.h_active /= get_num_odm_splits(pipe_ctx) + 1;
 
+	/* depends on h_active */
 	calculate_recout(pipe_ctx);
+	/* depends on pixel format */
+	calculate_scaling_ratios(pipe_ctx);
+	/* depends on scaling ratios and recout, does not calculate offset yet */
+	calculate_viewport_size(pipe_ctx);
 
-	/**
+	/*
+	 * LB calculations depend on vp size, h/v_active and scaling ratios
 	 * Setting line buffer pixel depth to 24bpp yields banding
 	 * on certain displays, such as the Sharp 4k
 	 */
 	pipe_ctx->plane_res.scl_data.lb_params.depth = LB_PIXEL_DEPTH_30BPP;
 	pipe_ctx->plane_res.scl_data.lb_params.alpha_en = plane_state->per_pixel_alpha;
 
-	pipe_ctx->plane_res.scl_data.recout.x += timing->h_border_left;
-	pipe_ctx->plane_res.scl_data.recout.y += timing->v_border_top;
-
-	pipe_ctx->plane_res.scl_data.h_active = timing->h_addressable +
-		store_h_border_left + timing->h_border_right;
-	pipe_ctx->plane_res.scl_data.v_active = timing->v_addressable +
-		timing->v_border_top + timing->v_border_bottom;
-	if (pipe_ctx->next_odm_pipe || pipe_ctx->prev_odm_pipe)
-		pipe_ctx->plane_res.scl_data.h_active /= get_num_odm_splits(pipe_ctx) + 1;
-
-	/* Taps calculations */
 	if (pipe_ctx->plane_res.xfm != NULL)
 		res = pipe_ctx->plane_res.xfm->funcs->transform_get_optimal_number_of_taps(
 				pipe_ctx->plane_res.xfm, &pipe_ctx->plane_res.scl_data, &plane_state->scaling_quality);
@@ -1251,9 +1063,31 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
 					&plane_state->scaling_quality);
 	}
 
+	/*
+	 * Depends on recout, scaling ratios, h_active and taps
+	 * May need to re-check lb size after this in some obscure scenario
+	 */
 	if (res)
-		/* May need to re-check lb size after this in some obscure scenario */
-		calculate_inits_and_adj_vp(pipe_ctx);
+		calculate_inits_and_viewports(pipe_ctx);
+
+	/*
+	 * Handle side by side and top bottom 3d recout offsets after vp calculation
+	 * since 3d is special and needs to calculate vp as if there is no recout offset
+	 * This may break with rotation, good thing we aren't mixing hw rotation and 3d
+	 */
+	if (pipe_ctx->top_pipe && pipe_ctx->top_pipe->plane_state == plane_state) {
+		ASSERT(plane_state->rotation == ROTATION_ANGLE_0 ||
+			(pipe_ctx->stream->view_format != VIEW_3D_FORMAT_TOP_AND_BOTTOM &&
+				pipe_ctx->stream->view_format != VIEW_3D_FORMAT_SIDE_BY_SIDE));
+		if (pipe_ctx->stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM)
+			pipe_ctx->plane_res.scl_data.recout.y += pipe_ctx->plane_res.scl_data.recout.height;
+		else if (pipe_ctx->stream->view_format == VIEW_3D_FORMAT_SIDE_BY_SIDE)
+			pipe_ctx->plane_res.scl_data.recout.x += pipe_ctx->plane_res.scl_data.recout.width;
+	}
+
+	if (pipe_ctx->plane_res.scl_data.viewport.height < MIN_VIEWPORT_SIZE ||
+			pipe_ctx->plane_res.scl_data.viewport.width < MIN_VIEWPORT_SIZE)
+		res = false;
 
 	DC_LOG_SCALER("%s pipe %d:\nViewport: height:%d width:%d x:%d y:%d  Recout: height:%d width:%d x:%d y:%d  HACTIVE:%d VACTIVE:%d\n"
 			"src_rect: height:%d width:%d x:%d y:%d  dst_rect: height:%d width:%d x:%d y:%d  clip_rect: height:%d width:%d x:%d y:%d\n",
@@ -1282,8 +1116,8 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx)
 			plane_state->clip_rect.x,
 			plane_state->clip_rect.y);
 
-	if (store_h_border_left)
-		restore_border_left_from_dst(pipe_ctx, store_h_border_left);
+	pipe_ctx->stream->dst.x -= timing->h_border_left;
+	pipe_ctx->stream->dst.y -= timing->v_border_top;
 
 	return res;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h
index 432754eaf10b..a6f21f9de6e4 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_types.h
@@ -271,11 +271,6 @@ struct dc_edid_caps {
 	struct dc_panel_patch panel_patch;
 };
 
-struct view {
-	uint32_t width;
-	uint32_t height;
-};
-
 struct dc_mode_flags {
 	/* note: part of refresh rate flag*/
 	uint32_t INTERLACE :1;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
index 98ab4b776924..a33f522a2648 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
@@ -631,8 +631,10 @@ static void dpp1_dscl_set_manual_ratio_init(
 		SCL_V_INIT_INT, init_int);
 
 	if (REG(SCL_VERT_FILTER_INIT_BOT)) {
-		init_frac = dc_fixpt_u0d19(data->inits.v_bot) << 5;
-		init_int = dc_fixpt_floor(data->inits.v_bot);
+		struct fixed31_32 bot = dc_fixpt_add(data->inits.v, data->ratios.vert);
+
+		init_frac = dc_fixpt_u0d19(bot) << 5;
+		init_int = dc_fixpt_floor(bot);
 		REG_SET_2(SCL_VERT_FILTER_INIT_BOT, 0,
 			SCL_V_INIT_FRAC_BOT, init_frac,
 			SCL_V_INIT_INT_BOT, init_int);
@@ -645,8 +647,10 @@ static void dpp1_dscl_set_manual_ratio_init(
 		SCL_V_INIT_INT_C, init_int);
 
 	if (REG(SCL_VERT_FILTER_INIT_BOT_C)) {
-		init_frac = dc_fixpt_u0d19(data->inits.v_c_bot) << 5;
-		init_int = dc_fixpt_floor(data->inits.v_c_bot);
+		struct fixed31_32 bot = dc_fixpt_add(data->inits.v_c, data->ratios.vert_c);
+
+		init_frac = dc_fixpt_u0d19(bot) << 5;
+		init_int = dc_fixpt_floor(bot);
 		REG_SET_2(SCL_VERT_FILTER_INIT_BOT_C, 0,
 			SCL_V_INIT_FRAC_BOT_C, init_frac,
 			SCL_V_INIT_INT_BOT_C, init_int);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 8357aa3c41d5..d7d70b9bb387 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -2289,12 +2289,14 @@ int dcn20_populate_dml_pipes_from_context(
 
 			pipes[pipe_cnt].pipe.src.source_scan = pln->rotation == ROTATION_ANGLE_90
 					|| pln->rotation == ROTATION_ANGLE_270 ? dm_vert : dm_horz;
-			pipes[pipe_cnt].pipe.src.viewport_y_y = scl->viewport_unadjusted.y;
-			pipes[pipe_cnt].pipe.src.viewport_y_c = scl->viewport_c_unadjusted.y;
-			pipes[pipe_cnt].pipe.src.viewport_width = scl->viewport_unadjusted.width;
-			pipes[pipe_cnt].pipe.src.viewport_width_c = scl->viewport_c_unadjusted.width;
-			pipes[pipe_cnt].pipe.src.viewport_height = scl->viewport_unadjusted.height;
-			pipes[pipe_cnt].pipe.src.viewport_height_c = scl->viewport_c_unadjusted.height;
+			pipes[pipe_cnt].pipe.src.viewport_y_y = scl->viewport.y;
+			pipes[pipe_cnt].pipe.src.viewport_y_c = scl->viewport_c.y;
+			pipes[pipe_cnt].pipe.src.viewport_width = scl->viewport.width;
+			pipes[pipe_cnt].pipe.src.viewport_width_c = scl->viewport_c.width;
+			pipes[pipe_cnt].pipe.src.viewport_height = scl->viewport.height;
+			pipes[pipe_cnt].pipe.src.viewport_height_c = scl->viewport_c.height;
+			pipes[pipe_cnt].pipe.src.viewport_width_max = pln->src_rect.width;
+			pipes[pipe_cnt].pipe.src.viewport_height_max = pln->src_rect.height;
 			pipes[pipe_cnt].pipe.src.surface_width_y = pln->plane_size.surface_size.width;
 			pipes[pipe_cnt].pipe.src.surface_height_y = pln->plane_size.surface_size.height;
 			pipes[pipe_cnt].pipe.src.surface_width_c = pln->plane_size.chroma_size.width;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
index 2ece3690bfa3..a0f0c54c863b 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
@@ -253,6 +253,8 @@ struct _vcs_dpi_display_pipe_source_params_st {
 	unsigned int viewport_y_c;
 	unsigned int viewport_width_c;
 	unsigned int viewport_height_c;
+	unsigned int viewport_width_max;
+	unsigned int viewport_height_max;
 	unsigned int data_pitch;
 	unsigned int data_pitch_c;
 	unsigned int meta_pitch;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
index 2a967458065b..8e5c9d22b364 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
@@ -630,6 +630,19 @@ static void fetch_pipe_params(struct display_mode_lib *mode_lib)
 				}
 			}
 		}
+		if (src->viewport_width_max) {
+			int hdiv_c = src->source_format >= dm_420_8 && src->source_format <= dm_422_10 ? 2 : 1;
+			int vdiv_c = src->source_format >= dm_420_8 && src->source_format <= dm_420_12 ? 2 : 1;
+
+			if (mode_lib->vba.ViewportWidth[mode_lib->vba.NumberOfActivePlanes] > src->viewport_width_max)
+				mode_lib->vba.ViewportWidth[mode_lib->vba.NumberOfActivePlanes] = src->viewport_width_max;
+			if (mode_lib->vba.ViewportHeight[mode_lib->vba.NumberOfActivePlanes] > src->viewport_height_max)
+				mode_lib->vba.ViewportHeight[mode_lib->vba.NumberOfActivePlanes] = src->viewport_height_max;
+			if (mode_lib->vba.ViewportWidthChroma[mode_lib->vba.NumberOfActivePlanes] > src->viewport_width_max / hdiv_c)
+				mode_lib->vba.ViewportWidthChroma[mode_lib->vba.NumberOfActivePlanes] = src->viewport_width_max / hdiv_c;
+			if (mode_lib->vba.ViewportHeightChroma[mode_lib->vba.NumberOfActivePlanes] > src->viewport_height_max / vdiv_c)
+				mode_lib->vba.ViewportHeightChroma[mode_lib->vba.NumberOfActivePlanes] = src->viewport_height_max / vdiv_c;
+		}
 
 		if (pipes[k].pipe.src.immediate_flip) {
 			mode_lib->vba.ImmediateFlipSupport = true;
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h b/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h
index 2947d1b15512..2a0db2b03047 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/transform.h
@@ -162,9 +162,7 @@ struct scl_inits {
 	struct fixed31_32 h;
 	struct fixed31_32 h_c;
 	struct fixed31_32 v;
-	struct fixed31_32 v_bot;
 	struct fixed31_32 v_c;
-	struct fixed31_32 v_c_bot;
 };
 
 struct scaler_data {
@@ -173,8 +171,6 @@ struct scaler_data {
 	struct scaling_taps taps;
 	struct rect viewport;
 	struct rect viewport_c;
-	struct rect viewport_unadjusted;
-	struct rect viewport_c_unadjusted;
 	struct rect recout;
 	struct scaling_ratios ratios;
 	struct scl_inits inits;
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 051/189] drm/amdgpu/swsmu/aldebaran: fix check in is_dpm_running

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit dd1d82c04e111b5a864638ede8965db2fe6d8653 ]

If smu_cmn_get_enabled_mask() fails, return false to be
consistent with other asics.

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index 16ad4683eb69..0d2f61f56f45 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1290,10 +1290,13 @@ static int aldebaran_usr_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_
 
 static bool aldebaran_is_dpm_running(struct smu_context *smu)
 {
-	int ret = 0;
+	int ret;
 	uint32_t feature_mask[2];
 	unsigned long feature_enabled;
+
 	ret = smu_cmn_get_enabled_mask(smu, feature_mask, 2);
+	if (ret)
+		return false;
 	feature_enabled = (unsigned long)((uint64_t)feature_mask[0] |
 					  ((uint64_t)feature_mask[1] << 32));
 	return !!(feature_enabled & SMC_DPM_FEATURE);
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 066/189] drm/amdgpu: fix metadata_size for ubo ioctl queries

[Sasha Levin]

From: Shiwu Zhang <shiwu.zhang@amd.com>

[ Upstream commit eba98523724be7ad3539f2c975de1527e0c99dd6 ]

Although the kfd_ioctl_get_dmabuf_info() still fail it will indicate
the caller right metadat_size useful for the same kfd ioctl next time.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index f9434bc2f9b2..db00de33caa3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -1246,6 +1246,9 @@ int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer,
 
 	BUG_ON(bo->tbo.type == ttm_bo_type_kernel);
 	ubo = to_amdgpu_bo_user(bo);
+	if (metadata_size)
+		*metadata_size = ubo->metadata_size;
+
 	if (buffer) {
 		if (buffer_size < ubo->metadata_size)
 			return -EINVAL;
@@ -1254,8 +1257,6 @@ int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer,
 			memcpy(buffer, ubo->metadata, ubo->metadata_size);
 	}
 
-	if (metadata_size)
-		*metadata_size = ubo->metadata_size;
 	if (flags)
 		*flags = ubo->metadata_flags;
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 067/189] drm/amdgpu: fix sdma firmware version error in sriov

[Sasha Levin]

From: Kevin Wang <kevin1.wang@amd.com>

[ Upstream commit 2b8f731849800e3948763ccaff31cceac526789b ]

Re-adjust the function return order to avoid empty sdma version in the
sriov environment. (read amdgpu_firmware_info)

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
index 240596b25fe4..9ab23947a151 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
@@ -145,9 +145,6 @@ static int sdma_v5_2_init_microcode(struct amdgpu_device *adev)
 	struct amdgpu_firmware_info *info = NULL;
 	const struct common_firmware_header *header = NULL;
 
-	if (amdgpu_sriov_vf(adev) && (adev->asic_type == CHIP_SIENNA_CICHLID))
-		return 0;
-
 	DRM_DEBUG("\n");
 
 	switch (adev->asic_type) {
@@ -182,6 +179,9 @@ static int sdma_v5_2_init_microcode(struct amdgpu_device *adev)
 		       (void *)&adev->sdma.instance[0],
 		       sizeof(struct amdgpu_sdma_instance));
 
+	if (amdgpu_sriov_vf(adev) && (adev->asic_type == CHIP_SIENNA_CICHLID))
+		return 0;
+
 	DRM_DEBUG("psp_load == '%s'\n",
 		  adev->firmware.load_type == AMDGPU_FW_LOAD_PSP ? "true" : "false");
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 068/189] drm/amd/display: Avoid HDCP over-read and corruption

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 06888d571b513cbfc0b41949948def6cb81021b2 ]

Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
index 2cbd931363bd..6d26d9c63ab2 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
@@ -29,8 +29,10 @@ static inline enum mod_hdcp_status validate_bksv(struct mod_hdcp *hdcp)
 {
 	uint64_t n = 0;
 	uint8_t count = 0;
+	u8 bksv[sizeof(n)] = { };
 
-	memcpy(&n, hdcp->auth.msg.hdcp1.bksv, sizeof(uint64_t));
+	memcpy(bksv, hdcp->auth.msg.hdcp1.bksv, sizeof(hdcp->auth.msg.hdcp1.bksv));
+	n = *(uint64_t *)bksv;
 
 	while (n) {
 		count++;
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 069/189] drm/amdgpu: remove unsafe optimization to drop preamble ib

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit 7d9c70d23550eb86a1bec1954ccaa8d6ec3a3328 ]

Take the situation with gfxoff, the optimization may cause
corrupt CE ram contents. In addition emit_cntxcntl callback
has similar optimization which firmware can handle properly
even for power feature.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
index a2fe2dac32c1..98906a43fda3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
@@ -130,7 +130,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	struct amdgpu_device *adev = ring->adev;
 	struct amdgpu_ib *ib = &ibs[0];
 	struct dma_fence *tmp = NULL;
-	bool skip_preamble, need_ctx_switch;
+	bool need_ctx_switch;
 	unsigned patch_offset = ~0;
 	struct amdgpu_vm *vm;
 	uint64_t fence_ctx;
@@ -227,7 +227,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	if (need_ctx_switch)
 		status |= AMDGPU_HAVE_CTX_SWITCH;
 
-	skip_preamble = ring->current_ctx == fence_ctx;
 	if (job && ring->funcs->emit_cntxcntl) {
 		status |= job->preamble_status;
 		status |= job->preemption_status;
@@ -245,14 +244,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	for (i = 0; i < num_ibs; ++i) {
 		ib = &ibs[i];
 
-		/* drop preamble IBs if we don't have a context switch */
-		if ((ib->flags & AMDGPU_IB_FLAG_PREAMBLE) &&
-		    skip_preamble &&
-		    !(status & AMDGPU_PREAMBLE_IB_PRESENT_FIRST) &&
-		    !amdgpu_mcbp &&
-		    !amdgpu_sriov_vf(adev)) /* for SRIOV preemption, Preamble CE ib must be inserted anyway */
-			continue;
-
 		if (job && ring->funcs->emit_frame_cntl) {
 			if (secure != !!(ib->flags & AMDGPU_IB_FLAGS_SECURE)) {
 				amdgpu_ring_emit_frame_cntl(ring, false, secure);
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 088/189] drm/amd/display: Fix DCN 3.01 DSCCLK validation

[Sasha Levin]

From: Nikola Cornij <nikola.cornij@amd.com>

[ Upstream commit 346cf627fb27c0fea63a041cedbaa4f31784e504 ]

[why]
DSCCLK validation is not necessary because DSCCLK is derrived from
DISPCLK, therefore if DISPCLK validation passes, DSCCLK is valid, too.
Doing DSCLK validation in addition to DISPCLK leads to modes being
wrongly rejected when DSCCLK was incorrectly set outside of DML.

[how]
Remove DSCCLK validation because it's implicitly validated under DISPCLK

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dc/dml/dcn30/display_mode_vba_30.c        | 64 ++++++-------------
 1 file changed, 21 insertions(+), 43 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
index cb3f70a71b51..af7d57602b2c 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
@@ -64,6 +64,7 @@ typedef struct {
 #define BPP_INVALID 0
 #define BPP_BLENDED_PIPE 0xffffffff
 #define DCN30_MAX_DSC_IMAGE_WIDTH 5184
+#define DCN30_MAX_FMT_420_BUFFER_WIDTH 4096
 
 static void DisplayPipeConfiguration(struct display_mode_lib *mode_lib);
 static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation(
@@ -3987,19 +3988,30 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 				} else if (v->PlaneRequiredDISPCLKWithoutODMCombine > v->MaxDispclkRoundedDownToDFSGranularity) {
 					v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
 					v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1;
-				} else if (v->DSCEnabled[k] && (v->HActive[k] > DCN30_MAX_DSC_IMAGE_WIDTH)) {
-					v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
-					v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1;
 				} else {
 					v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled;
 					v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithoutODMCombine;
-					/*420 format workaround*/
-					if (v->HActive[k] > 4096 && v->OutputFormat[k] == dm_420) {
+				}
+				if (v->DSCEnabled[k] && v->HActive[k] > DCN30_MAX_DSC_IMAGE_WIDTH
+						&& v->ODMCombineEnablePerState[i][k] != dm_odm_combine_mode_4to1) {
+					if (v->HActive[k] / 2 > DCN30_MAX_DSC_IMAGE_WIDTH) {
+						v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_4to1;
+						v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine4To1;
+					} else {
+						v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
+						v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1;
+					}
+				}
+				if (v->OutputFormat[k] == dm_420 && v->HActive[k] > DCN30_MAX_FMT_420_BUFFER_WIDTH
+						&& v->ODMCombineEnablePerState[i][k] != dm_odm_combine_mode_4to1) {
+					if (v->HActive[k] / 2 > DCN30_MAX_FMT_420_BUFFER_WIDTH) {
+						v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_4to1;
+						v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine4To1;
+					} else {
 						v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1;
 						v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1;
 					}
 				}
-
 				if (v->ODMCombineEnablePerState[i][k] == dm_odm_combine_mode_4to1) {
 					v->MPCCombine[i][j][k] = false;
 					v->NoOfDPP[i][j][k] = 4;
@@ -4281,42 +4293,8 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 		}
 	}
 
-	for (i = 0; i < v->soc.num_states; i++) {
-		v->DSCCLKRequiredMoreThanSupported[i] = false;
-		for (k = 0; k <= v->NumberOfActivePlanes - 1; k++) {
-			if (v->BlendingAndTiming[k] == k) {
-				if (v->Output[k] == dm_dp || v->Output[k] == dm_edp) {
-					if (v->OutputFormat[k] == dm_420) {
-						v->DSCFormatFactor = 2;
-					} else if (v->OutputFormat[k] == dm_444) {
-						v->DSCFormatFactor = 1;
-					} else if (v->OutputFormat[k] == dm_n422) {
-						v->DSCFormatFactor = 2;
-					} else {
-						v->DSCFormatFactor = 1;
-					}
-					if (v->RequiresDSC[i][k] == true) {
-						if (v->ODMCombineEnablePerState[i][k] == dm_odm_combine_mode_4to1) {
-							if (v->PixelClockBackEnd[k] / 12.0 / v->DSCFormatFactor
-									> (1.0 - v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0) * v->MaxDSCCLK[i]) {
-								v->DSCCLKRequiredMoreThanSupported[i] = true;
-							}
-						} else if (v->ODMCombineEnablePerState[i][k] == dm_odm_combine_mode_2to1) {
-							if (v->PixelClockBackEnd[k] / 6.0 / v->DSCFormatFactor
-									> (1.0 - v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0) * v->MaxDSCCLK[i]) {
-								v->DSCCLKRequiredMoreThanSupported[i] = true;
-							}
-						} else {
-							if (v->PixelClockBackEnd[k] / 3.0 / v->DSCFormatFactor
-									> (1.0 - v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0) * v->MaxDSCCLK[i]) {
-								v->DSCCLKRequiredMoreThanSupported[i] = true;
-							}
-						}
-					}
-				}
-			}
-		}
-	}
+	/* Skip dscclk validation: as long as dispclk is supported, dscclk is also implicitly supported */
+
 	for (i = 0; i < v->soc.num_states; i++) {
 		v->NotEnoughDSCUnits[i] = false;
 		v->TotalDSCUnitsRequired = 0.0;
@@ -5319,7 +5297,7 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 		for (j = 0; j < 2; j++) {
 			if (v->ScaleRatioAndTapsSupport == 1 && v->SourceFormatPixelAndScanSupport == 1 && v->ViewportSizeSupport[i][j] == 1
 					&& v->DIOSupport[i] == 1 && v->ODMCombine4To1SupportCheckOK[i] == 1
-					&& v->NotEnoughDSCUnits[i] == 0 && v->DSCCLKRequiredMoreThanSupported[i] == 0
+					&& v->NotEnoughDSCUnits[i] == 0
 					&& v->DTBCLKRequiredMoreThanSupported[i] == 0
 					&& v->ROBSupport[i][j] == 1 && v->DISPCLK_DPPCLK_Support[i][j] == 1 && v->TotalAvailablePipesSupport[i][j] == 1
 					&& EnoughWritebackUnits == 1 && WritebackModeSupport == 1
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 089/189] drm/amd/display: Revert "Fix clock table filling logic"

[Sasha Levin]

From: Ilya Bakoulin <Ilya.Bakoulin@amd.com>

[ Upstream commit ae88357c7966ec2a52cb1e70fd42f74a40c9dfcb ]

[Why]
This change was found to break some high-refresh modes. Reverting
to unblock mainline.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 78 +++++++------------
 .../drm/amd/display/dc/dcn21/dcn21_resource.c | 33 +++-----
 2 files changed, 39 insertions(+), 72 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index 1f56ceab5922..75ba86f951f8 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -835,66 +835,47 @@ static struct wm_table lpddr4_wm_table_rn = {
 	}
 };
 
-static unsigned int find_max_fclk_for_voltage(struct dpm_clocks *clock_table,
-		unsigned int voltage)
+static unsigned int find_socclk_for_voltage(struct dpm_clocks *clock_table, unsigned int voltage)
 {
 	int i;
-	uint32_t max_clk = 0;
 
-	for (i = 0; i < PP_SMU_NUM_FCLK_DPM_LEVELS; i++) {
-		if (clock_table->FClocks[i].Vol <= voltage) {
-			max_clk = clock_table->FClocks[i].Freq > max_clk ?
-				clock_table->FClocks[i].Freq : max_clk;
-		}
-	}
-
-	return max_clk;
-}
-
-static unsigned int find_max_memclk_for_voltage(struct dpm_clocks *clock_table,
-		unsigned int voltage)
-{
-	int i;
-	uint32_t max_clk = 0;
-
-	for (i = 0; i < PP_SMU_NUM_MEMCLK_DPM_LEVELS; i++) {
-		if (clock_table->MemClocks[i].Vol <= voltage) {
-			max_clk = clock_table->MemClocks[i].Freq > max_clk ?
-				clock_table->MemClocks[i].Freq : max_clk;
-		}
+	for (i = 0; i < PP_SMU_NUM_SOCCLK_DPM_LEVELS; i++) {
+		if (clock_table->SocClocks[i].Vol == voltage)
+			return clock_table->SocClocks[i].Freq;
 	}
 
-	return max_clk;
+	ASSERT(0);
+	return 0;
 }
 
-static unsigned int find_max_socclk_for_voltage(struct dpm_clocks *clock_table,
-		unsigned int voltage)
+static unsigned int find_dcfclk_for_voltage(struct dpm_clocks *clock_table, unsigned int voltage)
 {
 	int i;
-	uint32_t max_clk = 0;
 
-	for (i = 0; i < PP_SMU_NUM_SOCCLK_DPM_LEVELS; i++) {
-		if (clock_table->SocClocks[i].Vol <= voltage) {
-			max_clk = clock_table->SocClocks[i].Freq > max_clk ?
-				clock_table->SocClocks[i].Freq : max_clk;
-		}
+	for (i = 0; i < PP_SMU_NUM_DCFCLK_DPM_LEVELS; i++) {
+		if (clock_table->DcfClocks[i].Vol == voltage)
+			return clock_table->DcfClocks[i].Freq;
 	}
 
-	return max_clk;
+	ASSERT(0);
+	return 0;
 }
 
 static void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params, struct dpm_clocks *clock_table, struct integrated_info *bios_info)
 {
 	int i, j = 0;
-	unsigned int volt;
 
 	j = -1;
 
-	/* Find max DPM */
-	for (i = 0; i < PP_SMU_NUM_DCFCLK_DPM_LEVELS; ++i) {
-		if (clock_table->DcfClocks[i].Freq != 0 &&
-				clock_table->DcfClocks[i].Vol != 0)
+	ASSERT(PP_SMU_NUM_FCLK_DPM_LEVELS <= MAX_NUM_DPM_LVL);
+
+	/* Find lowest DPM, FCLK is filled in reverse order*/
+
+	for (i = PP_SMU_NUM_FCLK_DPM_LEVELS - 1; i >= 0; i--) {
+		if (clock_table->FClocks[i].Freq != 0 && clock_table->FClocks[i].Vol != 0) {
 			j = i;
+			break;
+		}
 	}
 
 	if (j == -1) {
@@ -905,18 +886,13 @@ static void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params
 
 	bw_params->clk_table.num_entries = j + 1;
 
-	for (i = 0; i < bw_params->clk_table.num_entries; i++) {
-		volt = clock_table->DcfClocks[i].Vol;
-
-		bw_params->clk_table.entries[i].voltage = volt;
-		bw_params->clk_table.entries[i].dcfclk_mhz =
-			clock_table->DcfClocks[i].Freq;
-		bw_params->clk_table.entries[i].fclk_mhz =
-			find_max_fclk_for_voltage(clock_table, volt);
-		bw_params->clk_table.entries[i].memclk_mhz =
-			find_max_memclk_for_voltage(clock_table, volt);
-		bw_params->clk_table.entries[i].socclk_mhz =
-			find_max_socclk_for_voltage(clock_table, volt);
+	for (i = 0; i < bw_params->clk_table.num_entries; i++, j--) {
+		bw_params->clk_table.entries[i].fclk_mhz = clock_table->FClocks[j].Freq;
+		bw_params->clk_table.entries[i].memclk_mhz = clock_table->MemClocks[j].Freq;
+		bw_params->clk_table.entries[i].voltage = clock_table->FClocks[j].Vol;
+		bw_params->clk_table.entries[i].dcfclk_mhz = find_dcfclk_for_voltage(clock_table, clock_table->FClocks[j].Vol);
+		bw_params->clk_table.entries[i].socclk_mhz = find_socclk_for_voltage(clock_table,
+									bw_params->clk_table.entries[i].voltage);
 	}
 
 	bw_params->vram_type = bios_info->memory_type;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 38a2aa87f5f5..8e3f1d0b4cc3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -1575,12 +1575,10 @@ static struct _vcs_dpi_voltage_scaling_st construct_low_pstate_lvl(struct clk_li
 	low_pstate_lvl.phyclk_d18_mhz = dcn2_1_soc.clock_limits[high_voltage_lvl].phyclk_d18_mhz;
 	low_pstate_lvl.phyclk_mhz = dcn2_1_soc.clock_limits[high_voltage_lvl].phyclk_mhz;
 
-	if (clk_table->num_entries < MAX_NUM_DPM_LVL) {
-		for (i = clk_table->num_entries; i > 1; i--)
-			clk_table->entries[i] = clk_table->entries[i-1];
-		clk_table->entries[1] = clk_table->entries[0];
-		clk_table->num_entries++;
-	}
+	for (i = clk_table->num_entries; i > 1; i--)
+		clk_table->entries[i] = clk_table->entries[i-1];
+	clk_table->entries[1] = clk_table->entries[0];
+	clk_table->num_entries++;
 
 	return low_pstate_lvl;
 }
@@ -1612,6 +1610,10 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 			}
 		}
 
+		/* clk_table[1] is reserved for min DF PState.  skip here to fill in later. */
+		if (i == 1)
+			k++;
+
 		clock_limits[k].state = k;
 		clock_limits[k].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
 		clock_limits[k].fabricclk_mhz = clk_table->entries[i].fclk_mhz;
@@ -1628,25 +1630,14 @@ static void update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 
 		k++;
 	}
-
-	if (clk_table->num_entries >= MAX_NUM_DPM_LVL) {
-		for (i = 0; i < clk_table->num_entries + 1; i++)
-			dcn2_1_soc.clock_limits[i] = clock_limits[i];
-	} else {
-		dcn2_1_soc.clock_limits[0] = clock_limits[0];
-		for (i = 2; i < clk_table->num_entries + 1; i++) {
-			dcn2_1_soc.clock_limits[i] = clock_limits[i - 1];
-			dcn2_1_soc.clock_limits[i].state = i;
-		}
-	}
-
+	for (i = 0; i < clk_table->num_entries + 1; i++)
+		dcn2_1_soc.clock_limits[i] = clock_limits[i];
 	if (clk_table->num_entries) {
+		dcn2_1_soc.num_states = clk_table->num_entries + 1;
 		/* fill in min DF PState */
 		dcn2_1_soc.clock_limits[1] = construct_low_pstate_lvl(clk_table, closest_clk_lvl);
-		dcn2_1_soc.num_states = clk_table->num_entries;
 		/* duplicate last level */
-		dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] =
-			dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
+		dcn2_1_soc.clock_limits[dcn2_1_soc.num_states] = dcn2_1_soc.clock_limits[dcn2_1_soc.num_states - 1];
 		dcn2_1_soc.clock_limits[dcn2_1_soc.num_states].state = dcn2_1_soc.num_states;
 	}
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 090/189] drm/amd/display: Update scaling settings on modeset

[Sasha Levin]

From: Roman Li <roman.li@amd.com>

[ Upstream commit c521fc316d12fb9ea7b7680e301d673bceda922e ]

[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.

[How]
Perform scaling settings update on modeset.

Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 62663e287b21..58577f7a57c1 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -9472,7 +9472,8 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
 	BUG_ON(dm_new_crtc_state->stream == NULL);
 
 	/* Scaling or underscan settings */
-	if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state))
+	if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state) ||
+				drm_atomic_crtc_needs_modeset(new_crtc_state))
 		update_stream_scaling_settings(
 			&new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream);
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 091/189] drm/amd/display: Release MST resources on switch from MST to SST

[Sasha Levin]

From: Vladimir Stempen <vladimir.stempen@amd.com>

[ Upstream commit 3f8518b60c10aa96f3efa38a967a0b4eb9211ac0 ]

[why]
When OS overrides training link training parameters
for MST device to SST mode, MST resources are not
released and leak of the resource may result crash and
incorrect MST discovery during following hot plugs.

[how]
Retaining sink object to be reused by SST link and
releasing MST  resources.

Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 3ff3d9e90983..f26ed50a9660 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1784,6 +1784,8 @@ static void set_dp_mst_mode(struct dc_link *link, bool mst_enable)
 		link->type = dc_connection_single;
 		link->local_sink = link->remote_sinks[0];
 		link->local_sink->sink_signal = SIGNAL_TYPE_DISPLAY_PORT;
+		dc_sink_retain(link->local_sink);
+		dm_helpers_dp_mst_stop_top_mgr(link->ctx, link);
 	} else if (mst_enable == true &&
 			link->type == dc_connection_single &&
 			link->remote_sinks[0] != NULL) {
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 092/189] drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7

[Sasha Levin]

From: Wesley Chalmers <Wesley.Chalmers@amd.com>

[ Upstream commit 3577e1678772ce3ede92af3a75b44a4b76f9b4ad ]

[WHY]
DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when
changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 6a10daec15cc..793554e61c52 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -243,7 +243,7 @@ void dcn20_dccg_init(struct dce_hwseq *hws)
 	REG_WRITE(MILLISECOND_TIME_BASE_DIV, 0x1186a0);
 
 	/* This value is dependent on the hardware pipeline delay so set once per SOC */
-	REG_WRITE(DISPCLK_FREQ_CHANGE_CNTL, 0x801003c);
+	REG_WRITE(DISPCLK_FREQ_CHANGE_CNTL, 0xe01003c);
 }
 
 void dcn20_disable_vga(
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 093/189] drm/amd/display: Fix off-by-one error in DML

[Sasha Levin]

From: Wesley Chalmers <Wesley.Chalmers@amd.com>

[ Upstream commit e4e3678260e9734f6f41b4325aac0b171833a618 ]

[WHY]
For DCN30 and later, there is no data in DML arrays indexed by state at
index num_states.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/dml/dcn30/display_mode_vba_30.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
index af7d57602b2c..db6bb7ea5316 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c
@@ -2053,7 +2053,7 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman
 			v->DISPCLKWithoutRamping,
 			v->DISPCLKDPPCLKVCOSpeed);
 	v->MaxDispclkRoundedToDFSGranularity = RoundToDFSGranularityDown(
-			v->soc.clock_limits[mode_lib->soc.num_states].dispclk_mhz,
+			v->soc.clock_limits[mode_lib->soc.num_states - 1].dispclk_mhz,
 			v->DISPCLKDPPCLKVCOSpeed);
 	if (v->DISPCLKWithoutRampingRoundedToDFSGranularity
 			> v->MaxDispclkRoundedToDFSGranularity) {
@@ -3958,20 +3958,20 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 			for (k = 0; k <= v->NumberOfActivePlanes - 1; k++) {
 				v->PlaneRequiredDISPCLKWithoutODMCombine = v->PixelClock[k] * (1.0 + v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0)
 						* (1.0 + v->DISPCLKRampingMargin / 100.0);
-				if ((v->PlaneRequiredDISPCLKWithoutODMCombine >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states]
-						&& v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states])) {
+				if ((v->PlaneRequiredDISPCLKWithoutODMCombine >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states - 1]
+						&& v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states - 1])) {
 					v->PlaneRequiredDISPCLKWithoutODMCombine = v->PixelClock[k] * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0);
 				}
 				v->PlaneRequiredDISPCLKWithODMCombine2To1 = v->PixelClock[k] / 2 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0)
 						* (1 + v->DISPCLKRampingMargin / 100.0);
-				if ((v->PlaneRequiredDISPCLKWithODMCombine2To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states]
-						&& v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states])) {
+				if ((v->PlaneRequiredDISPCLKWithODMCombine2To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states - 1]
+						&& v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states - 1])) {
 					v->PlaneRequiredDISPCLKWithODMCombine2To1 = v->PixelClock[k] / 2 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0);
 				}
 				v->PlaneRequiredDISPCLKWithODMCombine4To1 = v->PixelClock[k] / 4 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0)
 						* (1 + v->DISPCLKRampingMargin / 100.0);
-				if ((v->PlaneRequiredDISPCLKWithODMCombine4To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states]
-						&& v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states])) {
+				if ((v->PlaneRequiredDISPCLKWithODMCombine4To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states - 1]
+						&& v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states - 1])) {
 					v->PlaneRequiredDISPCLKWithODMCombine4To1 = v->PixelClock[k] / 4 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading / 100.0);
 				}
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 094/189] drm/amd/display: Fix crash during MPO + ODM combine mode recalculation

[Sasha Levin]

From: Aric Cyr <aric.cyr@amd.com>

[ Upstream commit 665f28507a2a3d8d72ed9afa9a2b9b17fd43add1 ]

[Why]
When calculating recout width for an MPO plane on a mode that's using
ODM combine, driver can calculate a negative value, resulting in a
crash.

[How]
For negative widths, use zero such that validation will prune the
configuration correctly and disallow MPO.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index 78278a10d899..3b1068a09095 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -776,6 +776,11 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx)
 			if (split_idx == split_count) {
 				/* rightmost pipe is the remainder recout */
 				data->recout.width -= data->h_active * split_count - data->recout.x;
+
+				/* ODM combine cases with MPO we can get negative widths */
+				if (data->recout.width < 0)
+					data->recout.width = 0;
+
 				data->recout.x = 0;
 			} else
 				data->recout.width = data->h_active - data->recout.x;
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 098/189] drm/amdkfd: use allowed domain for vmbo validation

[Sasha Levin]

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit bc05716d4fdd065013633602c5960a2bf1511b9c ]

Fixes handling when page tables are in system memory.

v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
    change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c  | 21 ++++---------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index 7d4118c8128a..5e69b5b50a19 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -50,12 +50,6 @@ static struct {
 	spinlock_t mem_limit_lock;
 } kfd_mem_limit;
 
-/* Struct used for amdgpu_amdkfd_bo_validate */
-struct amdgpu_vm_parser {
-	uint32_t        domain;
-	bool            wait;
-};
-
 static const char * const domain_bit_to_string[] = {
 		"CPU",
 		"GTT",
@@ -346,11 +340,9 @@ static int amdgpu_amdkfd_bo_validate(struct amdgpu_bo *bo, uint32_t domain,
 	return ret;
 }
 
-static int amdgpu_amdkfd_validate(void *param, struct amdgpu_bo *bo)
+static int amdgpu_amdkfd_validate_vm_bo(void *_unused, struct amdgpu_bo *bo)
 {
-	struct amdgpu_vm_parser *p = param;
-
-	return amdgpu_amdkfd_bo_validate(bo, p->domain, p->wait);
+	return amdgpu_amdkfd_bo_validate(bo, bo->allowed_domains, false);
 }
 
 /* vm_validate_pt_pd_bos - Validate page table and directory BOs
@@ -364,20 +356,15 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm)
 {
 	struct amdgpu_bo *pd = vm->root.base.bo;
 	struct amdgpu_device *adev = amdgpu_ttm_adev(pd->tbo.bdev);
-	struct amdgpu_vm_parser param;
 	int ret;
 
-	param.domain = AMDGPU_GEM_DOMAIN_VRAM;
-	param.wait = false;
-
-	ret = amdgpu_vm_validate_pt_bos(adev, vm, amdgpu_amdkfd_validate,
-					&param);
+	ret = amdgpu_vm_validate_pt_bos(adev, vm, amdgpu_amdkfd_validate_vm_bo, NULL);
 	if (ret) {
 		pr_err("failed to validate PT BOs\n");
 		return ret;
 	}
 
-	ret = amdgpu_amdkfd_validate(&param, pd);
+	ret = amdgpu_amdkfd_validate_vm_bo(NULL, pd);
 	if (ret) {
 		pr_err("failed to validate PD\n");
 		return ret;
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 103/189] drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_check

[Sasha Levin]

From: Mark Yacoub <markyacoub@chromium.org>

[ Upstream commit 03fc4cf45d30533d54f0f4ebc02aacfa12f52ce2 ]

For each CRTC state, check the size of Gamma and Degamma LUTs  so
unexpected and larger sizes wouldn't slip through.

TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes

v2: fix assignments in if clauses, Mark's email.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  4 ++
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |  1 +
 .../amd/display/amdgpu_dm/amdgpu_dm_color.c   | 41 ++++++++++++++++---
 3 files changed, 40 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 58577f7a57c1..35def321bae4 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -10040,6 +10040,10 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 			dm_old_crtc_state->dsc_force_changed == false)
 			continue;
 
+		ret = amdgpu_dm_verify_lut_sizes(new_crtc_state);
+		if (ret)
+			goto fail;
+
 		if (!new_crtc_state->enable)
 			continue;
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index b2f2ccfc20bb..c8e5bbbb8bce 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -591,6 +591,7 @@ void amdgpu_dm_trigger_timing_sync(struct drm_device *dev);
 #define MAX_COLOR_LEGACY_LUT_ENTRIES 256
 
 void amdgpu_dm_init_color_mod(void);
+int amdgpu_dm_verify_lut_sizes(const struct drm_crtc_state *crtc_state);
 int amdgpu_dm_update_crtc_color_mgmt(struct dm_crtc_state *crtc);
 int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 				      struct dc_plane_state *dc_plane_state);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
index 157fe4efbb59..a022e5bb30a5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
@@ -284,6 +284,37 @@ static int __set_input_tf(struct dc_transfer_func *func,
 	return res ? 0 : -ENOMEM;
 }
 
+/**
+ * Verifies that the Degamma and Gamma LUTs attached to the |crtc_state| are of
+ * the expected size.
+ * Returns 0 on success.
+ */
+int amdgpu_dm_verify_lut_sizes(const struct drm_crtc_state *crtc_state)
+{
+	const struct drm_color_lut *lut = NULL;
+	uint32_t size = 0;
+
+	lut = __extract_blob_lut(crtc_state->degamma_lut, &size);
+	if (lut && size != MAX_COLOR_LUT_ENTRIES) {
+		DRM_DEBUG_DRIVER(
+			"Invalid Degamma LUT size. Should be %u but got %u.\n",
+			MAX_COLOR_LUT_ENTRIES, size);
+		return -EINVAL;
+	}
+
+	lut = __extract_blob_lut(crtc_state->gamma_lut, &size);
+	if (lut && size != MAX_COLOR_LUT_ENTRIES &&
+	    size != MAX_COLOR_LEGACY_LUT_ENTRIES) {
+		DRM_DEBUG_DRIVER(
+			"Invalid Gamma LUT size. Should be %u (or %u for legacy) but got %u.\n",
+			MAX_COLOR_LUT_ENTRIES, MAX_COLOR_LEGACY_LUT_ENTRIES,
+			size);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  * amdgpu_dm_update_crtc_color_mgmt: Maps DRM color management to DC stream.
  * @crtc: amdgpu_dm crtc state
@@ -317,14 +348,12 @@ int amdgpu_dm_update_crtc_color_mgmt(struct dm_crtc_state *crtc)
 	bool is_legacy;
 	int r;
 
-	degamma_lut = __extract_blob_lut(crtc->base.degamma_lut, &degamma_size);
-	if (degamma_lut && degamma_size != MAX_COLOR_LUT_ENTRIES)
-		return -EINVAL;
+	r = amdgpu_dm_verify_lut_sizes(&crtc->base);
+	if (r)
+		return r;
 
+	degamma_lut = __extract_blob_lut(crtc->base.degamma_lut, &degamma_size);
 	regamma_lut = __extract_blob_lut(crtc->base.gamma_lut, &regamma_size);
-	if (regamma_lut && regamma_size != MAX_COLOR_LUT_ENTRIES &&
-	    regamma_size != MAX_COLOR_LEGACY_LUT_ENTRIES)
-		return -EINVAL;
 
 	has_degamma =
 		degamma_lut && !__is_lut_linear(degamma_lut, degamma_size);
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 111/189] drm/amdkfd: fix circular locking on get_wave_state

[Sasha Levin]

From: Jonathan Kim <jonathan.kim@amd.com>

[ Upstream commit 63f6e01237257e7226efc5087f3f0b525d320f54 ]

get_wave_state acquires the mmap_lock on copy_to_user but so do
mmu_notifiers.  mmu_notifiers allows dqm locking so do get_wave_state
outside the dqm_lock to prevent circular locking.

v2: squash in unused variable removal.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c | 28 +++++++++----------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index d3eaa1549bd7..ccc9d108caff 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -1674,29 +1674,27 @@ static int get_wave_state(struct device_queue_manager *dqm,
 			  u32 *save_area_used_size)
 {
 	struct mqd_manager *mqd_mgr;
-	int r;
 
 	dqm_lock(dqm);
 
-	if (q->properties.type != KFD_QUEUE_TYPE_COMPUTE ||
-	    q->properties.is_active || !q->device->cwsr_enabled) {
-		r = -EINVAL;
-		goto dqm_unlock;
-	}
-
 	mqd_mgr = dqm->mqd_mgrs[KFD_MQD_TYPE_CP];
 
-	if (!mqd_mgr->get_wave_state) {
-		r = -EINVAL;
-		goto dqm_unlock;
+	if (q->properties.type != KFD_QUEUE_TYPE_COMPUTE ||
+	    q->properties.is_active || !q->device->cwsr_enabled ||
+	    !mqd_mgr->get_wave_state) {
+		dqm_unlock(dqm);
+		return -EINVAL;
 	}
 
-	r = mqd_mgr->get_wave_state(mqd_mgr, q->mqd, ctl_stack,
-			ctl_stack_used_size, save_area_used_size);
-
-dqm_unlock:
 	dqm_unlock(dqm);
-	return r;
+
+	/*
+	 * get_wave_state is outside the dqm lock to prevent circular locking
+	 * and the queue should be protected against destruction by the process
+	 * lock.
+	 */
+	return mqd_mgr->get_wave_state(mqd_mgr, q->mqd, ctl_stack,
+			ctl_stack_used_size, save_area_used_size);
 }
 
 static int process_termination_cpsch(struct device_queue_manager *dqm,
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 112/189] drm/amd/display: Cover edge-case when changing DISPCLK WDIVIDER

[Sasha Levin]

From: Wesley Chalmers <Wesley.Chalmers@amd.com>

[ Upstream commit 78ebca321999699f30ea19029726d1a3908b395f ]

[WHY]
When changing the DISPCLK_WDIVIDER value from 126 to 127, the change in
clock rate is too great for the FIFOs to handle. This can cause visible
corruption during clock change.

HW has handed down this register sequence to fix the issue.

[HOW]
The sequence, from HW:
a.	127 -> 126
Read  DIG_FIFO_CAL_AVERAGE_LEVEL
FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4
Set DCCG_FIFO_ERRDET_OVR_EN = 1
Write 1 to OTGx_DROP_PIXEL for (N-4) times
Set DCCG_FIFO_ERRDET_OVR_EN = 0
Write DENTIST_DISPCLK_RDIVIDER = 126

Because of frequency stepping, sequence a can be executed to change the
divider from 127 to any other divider value.

b.	126 -> 127
Read  DIG_FIFO_CAL_AVERAGE_LEVEL
FIFO level N = DIG_FIFO_CAL_AVERAGE_LEVEL / 4
Set DCCG_FIFO_ERRDET_OVR_EN = 1
Write 1 to OTGx_ADD_PIXEL for (12-N) times
Set DCCG_FIFO_ERRDET_OVR_EN = 0
Write DENTIST_DISPCLK_RDIVIDER = 127

Because of frequency stepping, divider must first be set from any other
divider value to 126 before executing sequence b.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c  | 68 ++++++++++++++++++-
 .../display/dc/clk_mgr/dcn20/dcn20_clk_mgr.h  |  3 +-
 .../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c  |  4 +-
 3 files changed, 69 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c
index 372d53b5a34d..3d335b4e9891 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c
@@ -123,7 +123,7 @@ void dcn20_update_clocks_update_dpp_dto(struct clk_mgr_internal *clk_mgr,
 	}
 }
 
-void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr)
+void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr, struct dc_state *context)
 {
 	int dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
 			* clk_mgr->base.dentist_vco_freq_khz / clk_mgr->base.clks.dppclk_khz;
@@ -132,6 +132,68 @@ void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr)
 
 	uint32_t dppclk_wdivider = dentist_get_did_from_divider(dpp_divider);
 	uint32_t dispclk_wdivider = dentist_get_did_from_divider(disp_divider);
+	uint32_t current_dispclk_wdivider;
+	uint32_t i;
+
+	REG_GET(DENTIST_DISPCLK_CNTL,
+			DENTIST_DISPCLK_WDIVIDER, &current_dispclk_wdivider);
+
+	/* When changing divider to or from 127, some extra programming is required to prevent corruption */
+	if (current_dispclk_wdivider == 127 && dispclk_wdivider != 127) {
+		for (i = 0; i < clk_mgr->base.ctx->dc->res_pool->pipe_count; i++) {
+			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+			uint32_t fifo_level;
+			struct dccg *dccg = clk_mgr->base.ctx->dc->res_pool->dccg;
+			struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc;
+			int32_t N;
+			int32_t j;
+
+			if (!pipe_ctx->stream)
+				continue;
+			/* Virtual encoders don't have this function */
+			if (!stream_enc->funcs->get_fifo_cal_average_level)
+				continue;
+			fifo_level = stream_enc->funcs->get_fifo_cal_average_level(
+					stream_enc);
+			N = fifo_level / 4;
+			dccg->funcs->set_fifo_errdet_ovr_en(
+					dccg,
+					true);
+			for (j = 0; j < N - 4; j++)
+				dccg->funcs->otg_drop_pixel(
+						dccg,
+						pipe_ctx->stream_res.tg->inst);
+			dccg->funcs->set_fifo_errdet_ovr_en(
+					dccg,
+					false);
+		}
+	} else if (dispclk_wdivider == 127 && current_dispclk_wdivider != 127) {
+		REG_UPDATE(DENTIST_DISPCLK_CNTL,
+				DENTIST_DISPCLK_WDIVIDER, 126);
+		REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_CHG_DONE, 1, 50, 100);
+		for (i = 0; i < clk_mgr->base.ctx->dc->res_pool->pipe_count; i++) {
+			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+			struct dccg *dccg = clk_mgr->base.ctx->dc->res_pool->dccg;
+			struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc;
+			uint32_t fifo_level;
+			int32_t N;
+			int32_t j;
+
+			if (!pipe_ctx->stream)
+				continue;
+			/* Virtual encoders don't have this function */
+			if (!stream_enc->funcs->get_fifo_cal_average_level)
+				continue;
+			fifo_level = stream_enc->funcs->get_fifo_cal_average_level(
+					stream_enc);
+			N = fifo_level / 4;
+			dccg->funcs->set_fifo_errdet_ovr_en(dccg, true);
+			for (j = 0; j < 12 - N; j++)
+				dccg->funcs->otg_add_pixel(dccg,
+						pipe_ctx->stream_res.tg->inst);
+			dccg->funcs->set_fifo_errdet_ovr_en(dccg, false);
+		}
+	}
 
 	REG_UPDATE(DENTIST_DISPCLK_CNTL,
 			DENTIST_DISPCLK_WDIVIDER, dispclk_wdivider);
@@ -251,11 +313,11 @@ void dcn2_update_clocks(struct clk_mgr *clk_mgr_base,
 		if (dpp_clock_lowered) {
 			// if clock is being lowered, increase DTO before lowering refclk
 			dcn20_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower);
-			dcn20_update_clocks_update_dentist(clk_mgr);
+			dcn20_update_clocks_update_dentist(clk_mgr, context);
 		} else {
 			// if clock is being raised, increase refclk before lowering DTO
 			if (update_dppclk || update_dispclk)
-				dcn20_update_clocks_update_dentist(clk_mgr);
+				dcn20_update_clocks_update_dentist(clk_mgr, context);
 			// always update dtos unless clock is lowered and not safe to lower
 			dcn20_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower);
 		}
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.h
index 0b9c045b0c8e..d254d0b6fba1 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.h
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.h
@@ -50,7 +50,8 @@ void dcn2_get_clock(struct clk_mgr *clk_mgr,
 			enum dc_clock_type clock_type,
 			struct dc_clock_config *clock_cfg);
 
-void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr);
+void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr,
+					struct dc_state *context);
 
 void dcn2_read_clocks_from_hw_dentist(struct clk_mgr *clk_mgr_base);
 
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
index 652fa89fae5f..513676a6f52b 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
@@ -334,11 +334,11 @@ static void dcn3_update_clocks(struct clk_mgr *clk_mgr_base,
 		if (dpp_clock_lowered) {
 			/* if clock is being lowered, increase DTO before lowering refclk */
 			dcn20_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower);
-			dcn20_update_clocks_update_dentist(clk_mgr);
+			dcn20_update_clocks_update_dentist(clk_mgr, context);
 		} else {
 			/* if clock is being raised, increase refclk before lowering DTO */
 			if (update_dppclk || update_dispclk)
-				dcn20_update_clocks_update_dentist(clk_mgr);
+				dcn20_update_clocks_update_dentist(clk_mgr, context);
 			/* There is a check inside dcn20_update_clocks_update_dpp_dto which ensures
 			 * that we do not lower dto when it is not safe to lower. We do not need to
 			 * compare the current and new dppclk before calling this function.*/
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 113/189] drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.

[Sasha Levin]

From: Yifan Zhang <yifan1.zhang@amd.com>

[ Upstream commit 631003101c516ea29a74aee59666708857b9a805 ]

If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 516467e962b7..c09225d065c2 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -3673,8 +3673,12 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring)
 	if (ring->use_doorbell) {
 		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
 					(adev->doorbell_index.kiq * 2) << 2);
+		/* If GC has entered CGPG, ringing doorbell > first page doesn't
+		 * wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround
+		 * this issue.
+		 */
 		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
-					(adev->doorbell_index.userqueue_end * 2) << 2);
+					(adev->doorbell.size - 4));
 	}
 
 	WREG32_SOC15_RLC(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 114/189] drm/amdkfd: Fix circular lock in nocpsch path

[Sasha Levin]

From: Amber Lin <Amber.Lin@amd.com>

[ Upstream commit a7b2451d31cfa2e8aeccf3b35612ce33f02371fc ]

Calling free_mqd inside of destroy_queue_nocpsch_locked can cause a
circular lock. destroy_queue_nocpsch_locked is called under a DQM lock,
which is taken in MMU notifiers, potentially in FS reclaim context.
Taking another lock, which is BO reservation lock from free_mqd, while
causing an FS reclaim inside the DQM lock creates a problematic circular
lock dependency. Therefore move free_mqd out of
destroy_queue_nocpsch_locked and call it after unlocking DQM.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c  | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index ccc9d108caff..e9b3e2e32bf8 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -486,9 +486,6 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm,
 	if (retval == -ETIME)
 		qpd->reset_wavefronts = true;
 
-
-	mqd_mgr->free_mqd(mqd_mgr, q->mqd, q->mqd_mem_obj);
-
 	list_del(&q->list);
 	if (list_empty(&qpd->queues_list)) {
 		if (qpd->reset_wavefronts) {
@@ -523,6 +520,8 @@ static int destroy_queue_nocpsch(struct device_queue_manager *dqm,
 	int retval;
 	uint64_t sdma_val = 0;
 	struct kfd_process_device *pdd = qpd_to_pdd(qpd);
+	struct mqd_manager *mqd_mgr =
+		dqm->mqd_mgrs[get_mqd_type_from_queue_type(q->properties.type)];
 
 	/* Get the SDMA queue stats */
 	if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
@@ -540,6 +539,8 @@ static int destroy_queue_nocpsch(struct device_queue_manager *dqm,
 		pdd->sdma_past_activity_counter += sdma_val;
 	dqm_unlock(dqm);
 
+	mqd_mgr->free_mqd(mqd_mgr, q->mqd, q->mqd_mem_obj);
+
 	return retval;
 }
 
@@ -1629,7 +1630,7 @@ static bool set_cache_memory_policy(struct device_queue_manager *dqm,
 static int process_termination_nocpsch(struct device_queue_manager *dqm,
 		struct qcm_process_device *qpd)
 {
-	struct queue *q, *next;
+	struct queue *q;
 	struct device_process_node *cur, *next_dpn;
 	int retval = 0;
 	bool found = false;
@@ -1637,12 +1638,19 @@ static int process_termination_nocpsch(struct device_queue_manager *dqm,
 	dqm_lock(dqm);
 
 	/* Clear all user mode queues */
-	list_for_each_entry_safe(q, next, &qpd->queues_list, list) {
+	while (!list_empty(&qpd->queues_list)) {
+		struct mqd_manager *mqd_mgr;
 		int ret;
 
+		q = list_first_entry(&qpd->queues_list, struct queue, list);
+		mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
+				q->properties.type)];
 		ret = destroy_queue_nocpsch_locked(dqm, qpd, q);
 		if (ret)
 			retval = ret;
+		dqm_unlock(dqm);
+		mqd_mgr->free_mqd(mqd_mgr, q->mqd, q->mqd_mem_obj);
+		dqm_lock(dqm);
 	}
 
 	/* Unregister process */
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 128/189] drm/amdgpu: fix bad address translation for sienna_cichlid

[Sasha Levin]

From: "Stanley.Yang" <Stanley.Yang@amd.com>

[ Upstream commit 6ec598cc9dfbf40433e94a2ed1a622e3ef80268b ]

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h | 5 +++++
 drivers/gpu/drm/amd/amdgpu/umc_v8_7.c   | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h
index bbcccf53080d..e5a75fb788dd 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h
@@ -21,6 +21,11 @@
 #ifndef __AMDGPU_UMC_H__
 #define __AMDGPU_UMC_H__
 
+/*
+ * (addr / 256) * 4096, the higher 26 bits in ErrorAddr
+ * is the index of 4KB block
+ */
+#define ADDR_OF_4KB_BLOCK(addr)			(((addr) & ~0xffULL) << 4)
 /*
  * (addr / 256) * 8192, the higher 26 bits in ErrorAddr
  * is the index of 8KB block
diff --git a/drivers/gpu/drm/amd/amdgpu/umc_v8_7.c b/drivers/gpu/drm/amd/amdgpu/umc_v8_7.c
index 89d20adfa001..af59a35788e3 100644
--- a/drivers/gpu/drm/amd/amdgpu/umc_v8_7.c
+++ b/drivers/gpu/drm/amd/amdgpu/umc_v8_7.c
@@ -234,7 +234,7 @@ static void umc_v8_7_query_error_address(struct amdgpu_device *adev,
 		err_addr &= ~((0x1ULL << lsb) - 1);
 
 		/* translate umc channel address to soc pa, 3 parts are included */
-		retired_page = ADDR_OF_8KB_BLOCK(err_addr) |
+		retired_page = ADDR_OF_4KB_BLOCK(err_addr) |
 				ADDR_OF_256B_BLOCK(channel_index) |
 				OFFSET_IN_256B_BLOCK(err_addr);
 
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 129/189] drm/amdkfd: Walk through list with dqm lock hold

[Sasha Levin]

From: xinhui pan <xinhui.pan@amd.com>

[ Upstream commit 56f221b6389e7ab99c30bbf01c71998ae92fc584 ]

To avoid any list corruption.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c | 22 ++++++++++---------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index e9b3e2e32bf8..f0bad74af230 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -1709,7 +1709,7 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 		struct qcm_process_device *qpd)
 {
 	int retval;
-	struct queue *q, *next;
+	struct queue *q;
 	struct kernel_queue *kq, *kq_next;
 	struct mqd_manager *mqd_mgr;
 	struct device_process_node *cur, *next_dpn;
@@ -1766,24 +1766,26 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 		qpd->reset_wavefronts = false;
 	}
 
-	dqm_unlock(dqm);
-
-	/* Outside the DQM lock because under the DQM lock we can't do
-	 * reclaim or take other locks that others hold while reclaiming.
-	 */
-	if (found)
-		kfd_dec_compute_active(dqm->dev);
-
 	/* Lastly, free mqd resources.
 	 * Do free_mqd() after dqm_unlock to avoid circular locking.
 	 */
-	list_for_each_entry_safe(q, next, &qpd->queues_list, list) {
+	while (!list_empty(&qpd->queues_list)) {
+		q = list_first_entry(&qpd->queues_list, struct queue, list);
 		mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
 				q->properties.type)];
 		list_del(&q->list);
 		qpd->queue_count--;
+		dqm_unlock(dqm);
 		mqd_mgr->free_mqd(mqd_mgr, q->mqd, q->mqd_mem_obj);
+		dqm_lock(dqm);
 	}
+	dqm_unlock(dqm);
+
+	/* Outside the DQM lock because under the DQM lock we can't do
+	 * reclaim or take other locks that others hold while reclaiming.
+	 */
+	if (found)
+		kfd_dec_compute_active(dqm->dev);
 
 	return retval;
 }
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 146/189] Revert "drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue."

[Sasha Levin]

From: Yifan Zhang <yifan1.zhang@amd.com>

[ Upstream commit 962f2f1ae273399e357a3192d5413ca57f9b4885 ]

This reverts commit 631003101c516ea29a74aee59666708857b9a805.

Reason for revert: side effect of enlarging CP_MEC_DOORBELL_RANGE may
cause some APUs fail to enter gfxoff in certain user cases.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index c09225d065c2..516467e962b7 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -3673,12 +3673,8 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring)
 	if (ring->use_doorbell) {
 		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
 					(adev->doorbell_index.kiq * 2) << 2);
-		/* If GC has entered CGPG, ringing doorbell > first page doesn't
-		 * wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround
-		 * this issue.
-		 */
 		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
-					(adev->doorbell.size - 4));
+					(adev->doorbell_index.userqueue_end * 2) << 2);
 	}
 
 	WREG32_SOC15_RLC(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.13 147/189] drm/amd/display: Fix edp_bootup_bl_level initialization issue

[Sasha Levin]

From: Logush Oliver <ollogush@amd.com>

[ Upstream commit eeb90e26ed05dd44553d557057bf35f08f853af8 ]

[why]
Updating the file to fix the missing line

Signed-off-by: Logush Oliver <ollogush@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index d79f4fe06c47..4812a72f8aad 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -2131,7 +2131,7 @@ static enum bp_result get_integrated_info_v2_1(
 		info_v2_1->edp1_info.edp_pwr_down_bloff_to_vary_bloff;
 	info->edp1_info.edp_panel_bpc =
 		info_v2_1->edp1_info.edp_panel_bpc;
-	info->edp1_info.edp_bootup_bl_level =
+	info->edp1_info.edp_bootup_bl_level = info_v2_1->edp1_info.edp_bootup_bl_level;
 
 	info->edp2_info.edp_backlight_pwm_hz =
 	le16_to_cpu(info_v2_1->edp2_info.edp_backlight_pwm_hz);
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.13 113/189] drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.

[Alex Deucher]

On Tue, Jul 6, 2021 at 7:16 AM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Yifan Zhang <yifan1.zhang@amd.com>
>
> [ Upstream commit 631003101c516ea29a74aee59666708857b9a805 ]
>
> If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
> Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
>
> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This should be dropped.  It was already reverted.

Alex


> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> index 516467e962b7..c09225d065c2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> @@ -3673,8 +3673,12 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring)
>         if (ring->use_doorbell) {
>                 WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
>                                         (adev->doorbell_index.kiq * 2) << 2);
> +               /* If GC has entered CGPG, ringing doorbell > first page doesn't
> +                * wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround
> +                * this issue.
> +                */
>                 WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
> -                                       (adev->doorbell_index.userqueue_end * 2) << 2);
> +                                       (adev->doorbell.size - 4));
>         }
>
>         WREG32_SOC15_RLC(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
> --
> 2.30.2
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.13 113/189] drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.

[Felix Kuehling]

Am 2021-07-06 um 5:44 p.m. schrieb Alex Deucher:
> On Tue, Jul 6, 2021 at 7:16 AM Sasha Levin <sashal@kernel.org> wrote:
>> From: Yifan Zhang <yifan1.zhang@amd.com>
>>
>> [ Upstream commit 631003101c516ea29a74aee59666708857b9a805 ]
>>
>> If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
>> Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
>>
>> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
>> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
>> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
> This should be dropped.  It was already reverted.

Patch 146 of this series is the corresponding revert.

Regards,
  Felix


>
> Alex
>
>
>> ---
>>  drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +++++-
>>  1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
>> index 516467e962b7..c09225d065c2 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
>> @@ -3673,8 +3673,12 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring)
>>         if (ring->use_doorbell) {
>>                 WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
>>                                         (adev->doorbell_index.kiq * 2) << 2);
>> +               /* If GC has entered CGPG, ringing doorbell > first page doesn't
>> +                * wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround
>> +                * this issue.
>> +                */
>>                 WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
>> -                                       (adev->doorbell_index.userqueue_end * 2) << 2);
>> +                                       (adev->doorbell.size - 4));
>>         }
>>
>>         WREG32_SOC15_RLC(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
>> --
>> 2.30.2
>>
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.13 113/189] drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.

[Sasha Levin]

On Tue, Jul 06, 2021 at 07:09:37PM -0400, Felix Kuehling wrote:
>Am 2021-07-06 um 5:44 p.m. schrieb Alex Deucher:
>> On Tue, Jul 6, 2021 at 7:16 AM Sasha Levin <sashal@kernel.org> wrote:
>>> From: Yifan Zhang <yifan1.zhang@amd.com>
>>>
>>> [ Upstream commit 631003101c516ea29a74aee59666708857b9a805 ]
>>>
>>> If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
>>> Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
>>>
>>> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
>>> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
>>> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
>>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> This should be dropped.  It was already reverted.
>
>Patch 146 of this series is the corresponding revert.

I'll drop both, thanks!

-- 
Thanks,
Sasha
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx