[PATCH AUTOSEL 5.13 005/219] drm/amdgpu: Fix amdgpu_ras_eeprom_init()

[PATCH AUTOSEL 5.13 005/219] drm/amdgpu: Fix amdgpu_ras_eeprom_init()

[Sasha Levin]

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit dce4400e6516d18313d23de45b5be8a18980b00e ]

No need to account for the 2 bytes of EEPROM
address--this is now well abstracted away by
the fixes the the lower layers.

Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index f40c871da0c6..fb701c4fd5c5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -321,7 +321,7 @@ int amdgpu_ras_eeprom_init(struct amdgpu_ras_eeprom_control *control,
 		return ret;
 	}
 
-	__decode_table_header_from_buff(hdr, &buff[2]);
+	__decode_table_header_from_buff(hdr, buff);
 
 	if (hdr->header == EEPROM_TABLE_HDR_VAL) {
 		control->num_recs = (hdr->tbl_size - EEPROM_TABLE_HEADER_SIZE) /
-- 
2.30.2

[PATCH AUTOSEL 5.13 044/219] drm/amd/display: Fix timer_per_pixel unit error

[Sasha Levin]

From: Oliver Logush <oliver.logush@amd.com>

[ Upstream commit 23e55639b87fb16a9f0f66032ecb57060df6c46c ]

[why]
The units of the time_per_pixel variable were incorrect, this had to be
changed for the code to properly function.

[how]
The change was very straightforward, only required one line of code to
be changed where the calculation was done.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 81f583733fa8..12e92f620483 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -2461,7 +2461,7 @@ void dcn20_set_mcif_arb_params(
 				wb_arb_params->cli_watermark[k] = get_wm_writeback_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
 				wb_arb_params->pstate_watermark[k] = get_wm_writeback_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
 			}
-			wb_arb_params->time_per_pixel = 16.0 / context->res_ctx.pipe_ctx[i].stream->phy_pix_clk; /* 4 bit fraction, ms */
+			wb_arb_params->time_per_pixel = 16.0 * 1000 / (context->res_ctx.pipe_ctx[i].stream->phy_pix_clk / 1000); /* 4 bit fraction, ms */
 			wb_arb_params->slice_lines = 32;
 			wb_arb_params->arbitration_slice = 2;
 			wb_arb_params->max_scaled_time = dcn20_calc_max_scaled_time(wb_arb_params->time_per_pixel,
-- 
2.30.2

[PATCH AUTOSEL 5.13 053/219] drm/amdgpu: Fix a printing message

[Sasha Levin]

From: Oak Zeng <Oak.Zeng@amd.com>

[ Upstream commit 95f71f12aa45d65b7f2ccab95569795edffd379a ]

The printing message "PSP loading VCN firmware" is mis-leading because
people might think driver is loading VCN firmware. Actually when this
message is printed, driver is just preparing some VCN ucode, not loading
VCN firmware yet. The actual VCN firmware loading will be in the PSP block
hw_init. Fix the printing message

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 2 +-
 drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 2 +-
 drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c | 2 +-
 drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
index 27b1ced145d2..14ae2bfad59d 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
@@ -119,7 +119,7 @@ static int vcn_v1_0_sw_init(void *handle)
 		adev->firmware.ucode[AMDGPU_UCODE_ID_VCN].fw = adev->vcn.fw;
 		adev->firmware.fw_size +=
 			ALIGN(le32_to_cpu(hdr->ucode_size_bytes), PAGE_SIZE);
-		DRM_INFO("PSP loading VCN firmware\n");
+		dev_info(adev->dev, "Will use PSP to load VCN firmware\n");
 	}
 
 	r = amdgpu_vcn_resume(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
index 8af567c546db..f4686e918e0d 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
@@ -122,7 +122,7 @@ static int vcn_v2_0_sw_init(void *handle)
 		adev->firmware.ucode[AMDGPU_UCODE_ID_VCN].fw = adev->vcn.fw;
 		adev->firmware.fw_size +=
 			ALIGN(le32_to_cpu(hdr->ucode_size_bytes), PAGE_SIZE);
-		DRM_INFO("PSP loading VCN firmware\n");
+		dev_info(adev->dev, "Will use PSP to load VCN firmware\n");
 	}
 
 	r = amdgpu_vcn_resume(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
index 888b17d84691..e0c0c3734432 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
@@ -152,7 +152,7 @@ static int vcn_v2_5_sw_init(void *handle)
 			adev->firmware.fw_size +=
 				ALIGN(le32_to_cpu(hdr->ucode_size_bytes), PAGE_SIZE);
 		}
-		DRM_INFO("PSP loading VCN firmware\n");
+		dev_info(adev->dev, "Will use PSP to load VCN firmware\n");
 	}
 
 	r = amdgpu_vcn_resume(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
index 3b23de996db2..c2c5c4af51d2 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
@@ -152,7 +152,7 @@ static int vcn_v3_0_sw_init(void *handle)
 			adev->firmware.fw_size +=
 				ALIGN(le32_to_cpu(hdr->ucode_size_bytes), PAGE_SIZE);
 		}
-		DRM_INFO("PSP loading VCN firmware\n");
+		dev_info(adev->dev, "Will use PSP to load VCN firmware\n");
 	}
 
 	r = amdgpu_vcn_resume(adev);
-- 
2.30.2

[PATCH AUTOSEL 5.13 054/219] drm/amd/amdgpu: Update debugfs link_settings output link_rate field in hex

[Sasha Levin]

From: Anson Jacob <Anson.Jacob@amd.com>

[ Upstream commit 1a394b3c3de2577f200cb623c52a5c2b82805cec ]

link_rate is updated via debugfs using hex values, set it to output
in hex as well.

eg: Resolution: 1920x1080@144Hz
cat /sys/kernel/debug/dri/0/DP-1/link_settings
Current:  4  0x14  0  Verified:  4  0x1e  0  Reported:  4  0x1e  16  Preferred:  0  0x0  0

echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings

cat /sys/kernel/debug/dri/0/DP-1/link_settings
Current:  4  0x1e  0  Verified:  4  0x1e  0  Reported:  4  0x1e  16  Preferred:  4  0x1e  0

Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c    | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 1b6b15708b96..08ff1166ffc8 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -197,29 +197,29 @@ static ssize_t dp_link_settings_read(struct file *f, char __user *buf,
 
 	rd_buf_ptr = rd_buf;
 
-	str_len = strlen("Current:  %d  %d  %d  ");
-	snprintf(rd_buf_ptr, str_len, "Current:  %d  %d  %d  ",
+	str_len = strlen("Current:  %d  0x%x  %d  ");
+	snprintf(rd_buf_ptr, str_len, "Current:  %d  0x%x  %d  ",
 			link->cur_link_settings.lane_count,
 			link->cur_link_settings.link_rate,
 			link->cur_link_settings.link_spread);
 	rd_buf_ptr += str_len;
 
-	str_len = strlen("Verified:  %d  %d  %d  ");
-	snprintf(rd_buf_ptr, str_len, "Verified:  %d  %d  %d  ",
+	str_len = strlen("Verified:  %d  0x%x  %d  ");
+	snprintf(rd_buf_ptr, str_len, "Verified:  %d  0x%x  %d  ",
 			link->verified_link_cap.lane_count,
 			link->verified_link_cap.link_rate,
 			link->verified_link_cap.link_spread);
 	rd_buf_ptr += str_len;
 
-	str_len = strlen("Reported:  %d  %d  %d  ");
-	snprintf(rd_buf_ptr, str_len, "Reported:  %d  %d  %d  ",
+	str_len = strlen("Reported:  %d  0x%x  %d  ");
+	snprintf(rd_buf_ptr, str_len, "Reported:  %d  0x%x  %d  ",
 			link->reported_link_cap.lane_count,
 			link->reported_link_cap.link_rate,
 			link->reported_link_cap.link_spread);
 	rd_buf_ptr += str_len;
 
-	str_len = strlen("Preferred:  %d  %d  %d  ");
-	snprintf(rd_buf_ptr, str_len, "Preferred:  %d  %d  %d\n",
+	str_len = strlen("Preferred:  %d  0x%x  %d  ");
+	snprintf(rd_buf_ptr, str_len, "Preferred:  %d  0x%x  %d\n",
 			link->preferred_link_setting.lane_count,
 			link->preferred_link_setting.link_rate,
 			link->preferred_link_setting.link_spread);
-- 
2.30.2

[PATCH AUTOSEL 5.13 118/219] drm/amd/display: fix missing writeback disablement if plane is removed

[Sasha Levin]

From: Roy Chan <roy.chan@amd.com>

[ Upstream commit 82367e7f22d085092728f45fd5fbb15e3fb997c0 ]

[Why]
If the plane has been removed, the writeback disablement logic
doesn't run

[How]
fix the logic order

Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 14 ++++++++------
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 12 +++++++++++-
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 793554e61c52..03b941e76de2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1703,13 +1703,15 @@ void dcn20_program_front_end_for_ctx(
 				dcn20_program_pipe(dc, pipe, context);
 				pipe = pipe->bottom_pipe;
 			}
-			/* Program secondary blending tree and writeback pipes */
-			pipe = &context->res_ctx.pipe_ctx[i];
-			if (!pipe->prev_odm_pipe && pipe->stream->num_wb_info > 0
-					&& (pipe->update_flags.raw || pipe->plane_state->update_flags.raw || pipe->stream->update_flags.raw)
-					&& hws->funcs.program_all_writeback_pipes_in_tree)
-				hws->funcs.program_all_writeback_pipes_in_tree(dc, pipe->stream, context);
 		}
+		/* Program secondary blending tree and writeback pipes */
+		pipe = &context->res_ctx.pipe_ctx[i];
+		if (!pipe->top_pipe && !pipe->prev_odm_pipe
+				&& pipe->stream && pipe->stream->num_wb_info > 0
+				&& (pipe->update_flags.raw || (pipe->plane_state && pipe->plane_state->update_flags.raw)
+					|| pipe->stream->update_flags.raw)
+				&& hws->funcs.program_all_writeback_pipes_in_tree)
+			hws->funcs.program_all_writeback_pipes_in_tree(dc, pipe->stream, context);
 	}
 }
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index d53f8b39699b..37944f94c693 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -396,12 +396,22 @@ void dcn30_program_all_writeback_pipes_in_tree(
 			for (i_pipe = 0; i_pipe < dc->res_pool->pipe_count; i_pipe++) {
 				struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i_pipe];
 
+				if (!pipe_ctx->plane_state)
+					continue;
+
 				if (pipe_ctx->plane_state == wb_info.writeback_source_plane) {
 					wb_info.mpcc_inst = pipe_ctx->plane_res.mpcc_inst;
 					break;
 				}
 			}
-			ASSERT(wb_info.mpcc_inst != -1);
+
+			if (wb_info.mpcc_inst == -1) {
+				/* Disable writeback pipe and disconnect from MPCC
+				 * if source plane has been removed
+				 */
+				dc->hwss.disable_writeback(dc, wb_info.dwb_pipe_inst);
+				continue;
+			}
 
 			ASSERT(wb_info.dwb_pipe_inst < dc->res_pool->res_cap->num_dwb);
 			dwb = dc->res_pool->dwbc[wb_info.dwb_pipe_inst];
-- 
2.30.2

[PATCH AUTOSEL 5.13 119/219] drm/amd/display: fix incorrect CM/TF programming sequence in dwb

[Sasha Levin]

From: Roy Chan <roy.chan@amd.com>

[ Upstream commit 781e1e23131cce56fb557e6ec2260480a6bd08cc ]

[How]
the programming sequeune was for old asic.
the correct programming sequeunce should be similar to the one
used in mpc. the fix is copied from the mpc programming sequeunce.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dcn30/dcn30_dwb_cm.c   | 90 +++++++++++++------
 1 file changed, 64 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dwb_cm.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dwb_cm.c
index 3fe9e41e4dbd..6a3d3a0ec0a3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dwb_cm.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dwb_cm.c
@@ -49,6 +49,11 @@
 static void dwb3_get_reg_field_ogam(struct dcn30_dwbc *dwbc30,
 	struct dcn3_xfer_func_reg *reg)
 {
+	reg->shifts.field_region_start_base = dwbc30->dwbc_shift->DWB_OGAM_RAMA_EXP_REGION_START_BASE_B;
+	reg->masks.field_region_start_base = dwbc30->dwbc_mask->DWB_OGAM_RAMA_EXP_REGION_START_BASE_B;
+	reg->shifts.field_offset = dwbc30->dwbc_shift->DWB_OGAM_RAMA_OFFSET_B;
+	reg->masks.field_offset = dwbc30->dwbc_mask->DWB_OGAM_RAMA_OFFSET_B;
+
 	reg->shifts.exp_region0_lut_offset = dwbc30->dwbc_shift->DWB_OGAM_RAMA_EXP_REGION0_LUT_OFFSET;
 	reg->masks.exp_region0_lut_offset = dwbc30->dwbc_mask->DWB_OGAM_RAMA_EXP_REGION0_LUT_OFFSET;
 	reg->shifts.exp_region0_num_segments = dwbc30->dwbc_shift->DWB_OGAM_RAMA_EXP_REGION0_NUM_SEGMENTS;
@@ -66,8 +71,6 @@ static void dwb3_get_reg_field_ogam(struct dcn30_dwbc *dwbc30,
 	reg->masks.field_region_end_base = dwbc30->dwbc_mask->DWB_OGAM_RAMA_EXP_REGION_END_BASE_B;
 	reg->shifts.field_region_linear_slope = dwbc30->dwbc_shift->DWB_OGAM_RAMA_EXP_REGION_START_SLOPE_B;
 	reg->masks.field_region_linear_slope = dwbc30->dwbc_mask->DWB_OGAM_RAMA_EXP_REGION_START_SLOPE_B;
-	reg->masks.field_offset = dwbc30->dwbc_mask->DWB_OGAM_RAMA_OFFSET_B;
-	reg->shifts.field_offset = dwbc30->dwbc_shift->DWB_OGAM_RAMA_OFFSET_B;
 	reg->shifts.exp_region_start = dwbc30->dwbc_shift->DWB_OGAM_RAMA_EXP_REGION_START_B;
 	reg->masks.exp_region_start = dwbc30->dwbc_mask->DWB_OGAM_RAMA_EXP_REGION_START_B;
 	reg->shifts.exp_resion_start_segment = dwbc30->dwbc_shift->DWB_OGAM_RAMA_EXP_REGION_START_SEGMENT_B;
@@ -147,18 +150,19 @@ static enum dc_lut_mode dwb3_get_ogam_current(
 	uint32_t state_mode;
 	uint32_t ram_select;
 
-	REG_GET(DWB_OGAM_CONTROL,
-		DWB_OGAM_MODE, &state_mode);
-	REG_GET(DWB_OGAM_CONTROL,
-		DWB_OGAM_SELECT, &ram_select);
+	REG_GET_2(DWB_OGAM_CONTROL,
+		DWB_OGAM_MODE_CURRENT, &state_mode,
+		DWB_OGAM_SELECT_CURRENT, &ram_select);
 
 	if (state_mode == 0) {
 		mode = LUT_BYPASS;
 	} else if (state_mode == 2) {
 		if (ram_select == 0)
 			mode = LUT_RAM_A;
-		else
+		else if (ram_select == 1)
 			mode = LUT_RAM_B;
+		else
+			mode = LUT_BYPASS;
 	} else {
 		// Reserved value
 		mode = LUT_BYPASS;
@@ -172,10 +176,10 @@ static void dwb3_configure_ogam_lut(
 	struct dcn30_dwbc *dwbc30,
 	bool is_ram_a)
 {
-	REG_UPDATE(DWB_OGAM_LUT_CONTROL,
-		DWB_OGAM_LUT_READ_COLOR_SEL, 7);
-	REG_UPDATE(DWB_OGAM_CONTROL,
-		DWB_OGAM_SELECT, is_ram_a == true ? 0 : 1);
+	REG_UPDATE_2(DWB_OGAM_LUT_CONTROL,
+		DWB_OGAM_LUT_WRITE_COLOR_MASK, 7,
+		DWB_OGAM_LUT_HOST_SEL, (is_ram_a == true) ? 0 : 1);
+
 	REG_SET(DWB_OGAM_LUT_INDEX, 0, DWB_OGAM_LUT_INDEX, 0);
 }
 
@@ -185,17 +189,45 @@ static void dwb3_program_ogam_pwl(struct dcn30_dwbc *dwbc30,
 {
 	uint32_t i;
 
-    // triple base implementation
-	for (i = 0; i < num/2; i++) {
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+0].red_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+0].green_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+0].blue_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+1].red_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+1].green_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+1].blue_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+2].red_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+2].green_reg);
-		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[2*i+2].blue_reg);
+	uint32_t last_base_value_red = rgb[num-1].red_reg + rgb[num-1].delta_red_reg;
+	uint32_t last_base_value_green = rgb[num-1].green_reg + rgb[num-1].delta_green_reg;
+	uint32_t last_base_value_blue = rgb[num-1].blue_reg + rgb[num-1].delta_blue_reg;
+
+	if (is_rgb_equal(rgb,  num)) {
+		for (i = 0 ; i < num; i++)
+			REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[i].red_reg);
+
+		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, last_base_value_red);
+
+	} else {
+
+		REG_UPDATE(DWB_OGAM_LUT_CONTROL,
+				DWB_OGAM_LUT_WRITE_COLOR_MASK, 4);
+
+		for (i = 0 ; i < num; i++)
+			REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[i].red_reg);
+
+		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, last_base_value_red);
+
+		REG_SET(DWB_OGAM_LUT_INDEX, 0, DWB_OGAM_LUT_INDEX, 0);
+
+		REG_UPDATE(DWB_OGAM_LUT_CONTROL,
+				DWB_OGAM_LUT_WRITE_COLOR_MASK, 2);
+
+		for (i = 0 ; i < num; i++)
+			REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[i].green_reg);
+
+		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, last_base_value_green);
+
+		REG_SET(DWB_OGAM_LUT_INDEX, 0, DWB_OGAM_LUT_INDEX, 0);
+
+		REG_UPDATE(DWB_OGAM_LUT_CONTROL,
+				DWB_OGAM_LUT_WRITE_COLOR_MASK, 1);
+
+		for (i = 0 ; i < num; i++)
+			REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, rgb[i].blue_reg);
+
+		REG_SET(DWB_OGAM_LUT_DATA, 0, DWB_OGAM_LUT_DATA, last_base_value_blue);
 	}
 }
 
@@ -211,6 +243,8 @@ static bool dwb3_program_ogam_lut(
 		return false;
 	}
 
+	REG_SET(DWB_OGAM_CONTROL, 0, DWB_OGAM_MODE, 2);
+
 	current_mode = dwb3_get_ogam_current(dwbc30);
 	if (current_mode == LUT_BYPASS || current_mode == LUT_RAM_A)
 		next_mode = LUT_RAM_B;
@@ -227,8 +261,7 @@ static bool dwb3_program_ogam_lut(
 	dwb3_program_ogam_pwl(
 		dwbc30, params->rgb_resulted, params->hw_points_num);
 
-	REG_SET(DWB_OGAM_CONTROL, 0, DWB_OGAM_MODE, 2);
-	REG_SET(DWB_OGAM_CONTROL, 0, DWB_OGAM_SELECT, next_mode == LUT_RAM_A ? 0 : 1);
+	REG_UPDATE(DWB_OGAM_CONTROL, DWB_OGAM_SELECT, next_mode == LUT_RAM_A ? 0 : 1);
 
 	return true;
 }
@@ -271,14 +304,19 @@ static void dwb3_program_gamut_remap(
 
 	struct color_matrices_reg gam_regs;
 
-	REG_UPDATE(DWB_GAMUT_REMAP_COEF_FORMAT, DWB_GAMUT_REMAP_COEF_FORMAT, coef_format);
-
 	if (regval == NULL || select == CM_GAMUT_REMAP_MODE_BYPASS) {
 		REG_SET(DWB_GAMUT_REMAP_MODE, 0,
 				DWB_GAMUT_REMAP_MODE, 0);
 		return;
 	}
 
+	REG_UPDATE(DWB_GAMUT_REMAP_COEF_FORMAT, DWB_GAMUT_REMAP_COEF_FORMAT, coef_format);
+
+	gam_regs.shifts.csc_c11 = dwbc30->dwbc_shift->DWB_GAMUT_REMAPA_C11;
+	gam_regs.masks.csc_c11  = dwbc30->dwbc_mask->DWB_GAMUT_REMAPA_C11;
+	gam_regs.shifts.csc_c12 = dwbc30->dwbc_shift->DWB_GAMUT_REMAPA_C12;
+	gam_regs.masks.csc_c12 = dwbc30->dwbc_mask->DWB_GAMUT_REMAPA_C12;
+
 	switch (select) {
 	case CM_GAMUT_REMAP_MODE_RAMA_COEFF:
 		gam_regs.csc_c11_c12 = REG(DWB_GAMUT_REMAPA_C11_C12);
-- 
2.30.2

[PATCH AUTOSEL 5.13 129/219] gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit a211260c34cfadc6068fece8c9e99e0fe1e2a2b6 ]

The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
  DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
       addr, *val);

Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
  val &= ~amdgpu_connector->router.ddc_mux_control_pin;

To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
index bca4dddd5a15..82608df43396 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
@@ -339,7 +339,7 @@ static void amdgpu_i2c_put_byte(struct amdgpu_i2c_chan *i2c_bus,
 void
 amdgpu_i2c_router_select_ddc_port(const struct amdgpu_connector *amdgpu_connector)
 {
-	u8 val;
+	u8 val = 0;
 
 	if (!amdgpu_connector->router.ddc_valid)
 		return;
-- 
2.30.2

[PATCH AUTOSEL 5.13 130/219] drm/display: fix possible null-pointer dereference in dcn10_set_clock()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 554594567b1fa3da74f88ec7b2dc83d000c58e98 ]

The variable dc->clk_mgr is checked in:
  if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock)

This indicates dc->clk_mgr can be NULL.
However, it is dereferenced in:
    if (!dc->clk_mgr->funcs->get_clock)

To fix this null-pointer dereference, check dc->clk_mgr and the function
pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them
is NULL.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 7c939c0a977b..29f61a8d3e29 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3938,13 +3938,12 @@ enum dc_status dcn10_set_clock(struct dc *dc,
 	struct dc_clock_config clock_cfg = {0};
 	struct dc_clocks *current_clocks = &context->bw_ctx.bw.dcn.clk;
 
-	if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock)
-				dc->clk_mgr->funcs->get_clock(dc->clk_mgr,
-						context, clock_type, &clock_cfg);
-
-	if (!dc->clk_mgr->funcs->get_clock)
+	if (!dc->clk_mgr || !dc->clk_mgr->funcs->get_clock)
 		return DC_FAIL_UNSUPPORTED_1;
 
+	dc->clk_mgr->funcs->get_clock(dc->clk_mgr,
+		context, clock_type, &clock_cfg);
+
 	if (clk_khz > clock_cfg.max_clock_khz)
 		return DC_FAIL_CLK_EXCEED_MAX;
 
@@ -3962,7 +3961,7 @@ enum dc_status dcn10_set_clock(struct dc *dc,
 	else
 		return DC_ERROR_UNEXPECTED;
 
-	if (dc->clk_mgr && dc->clk_mgr->funcs->update_clocks)
+	if (dc->clk_mgr->funcs->update_clocks)
 				dc->clk_mgr->funcs->update_clocks(dc->clk_mgr,
 				context, true);
 	return DC_OK;
-- 
2.30.2

[PATCH AUTOSEL 5.13 198/219] drm/amdkfd: Account for SH/SE count when setting up cu masks.

[Sasha Levin]

From: Sean Keely <Sean.Keely@amd.com>

[ Upstream commit 1ec06c2dee679e9f089e78ed20cb74ee90155f61 ]

On systems with multiple SH per SE compute_static_thread_mgmt_se#
is split into independent masks, one for each SH, in the upper and
lower 16 bits.  We need to detect this and apply cu masking to each
SH.  The cu mask bits are assigned first to each SE, then to
alternate SHs, then finally to higher CU id.  This ensures that
the maximum number of SPIs are engaged as early as possible while
balancing CU assignment to each SH.

v2: Use max SH/SE rather than max SH in cu_per_sh.

v3: Fix comment blocks, ensure se_mask is initially zero filled,
    and correctly assign se.sh.cu positions to unset bits in cu_mask.

Signed-off-by: Sean Keely <Sean.Keely@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c | 84 +++++++++++++++-----
 drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h |  1 +
 2 files changed, 64 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
index 88813dad731f..c021519af810 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
@@ -98,36 +98,78 @@ void mqd_symmetrically_map_cu_mask(struct mqd_manager *mm,
 		uint32_t *se_mask)
 {
 	struct kfd_cu_info cu_info;
-	uint32_t cu_per_se[KFD_MAX_NUM_SE] = {0};
-	int i, se, sh, cu = 0;
-
+	uint32_t cu_per_sh[KFD_MAX_NUM_SE][KFD_MAX_NUM_SH_PER_SE] = {0};
+	int i, se, sh, cu;
 	amdgpu_amdkfd_get_cu_info(mm->dev->kgd, &cu_info);
 
 	if (cu_mask_count > cu_info.cu_active_number)
 		cu_mask_count = cu_info.cu_active_number;
 
+	/* Exceeding these bounds corrupts the stack and indicates a coding error.
+	 * Returning with no CU's enabled will hang the queue, which should be
+	 * attention grabbing.
+	 */
+	if (cu_info.num_shader_engines > KFD_MAX_NUM_SE) {
+		pr_err("Exceeded KFD_MAX_NUM_SE, chip reports %d\n", cu_info.num_shader_engines);
+		return;
+	}
+	if (cu_info.num_shader_arrays_per_engine > KFD_MAX_NUM_SH_PER_SE) {
+		pr_err("Exceeded KFD_MAX_NUM_SH, chip reports %d\n",
+			cu_info.num_shader_arrays_per_engine * cu_info.num_shader_engines);
+		return;
+	}
+	/* Count active CUs per SH.
+	 *
+	 * Some CUs in an SH may be disabled.	HW expects disabled CUs to be
+	 * represented in the high bits of each SH's enable mask (the upper and lower
+	 * 16 bits of se_mask) and will take care of the actual distribution of
+	 * disabled CUs within each SH automatically.
+	 * Each half of se_mask must be filled only on bits 0-cu_per_sh[se][sh]-1.
+	 *
+	 * See note on Arcturus cu_bitmap layout in gfx_v9_0_get_cu_info.
+	 */
 	for (se = 0; se < cu_info.num_shader_engines; se++)
 		for (sh = 0; sh < cu_info.num_shader_arrays_per_engine; sh++)
-			cu_per_se[se] += hweight32(cu_info.cu_bitmap[se % 4][sh + (se / 4)]);
-
-	/* Symmetrically map cu_mask to all SEs:
-	 * cu_mask[0] bit0 -> se_mask[0] bit0;
-	 * cu_mask[0] bit1 -> se_mask[1] bit0;
-	 * ... (if # SE is 4)
-	 * cu_mask[0] bit4 -> se_mask[0] bit1;
+			cu_per_sh[se][sh] = hweight32(cu_info.cu_bitmap[se % 4][sh + (se / 4)]);
+
+	/* Symmetrically map cu_mask to all SEs & SHs:
+	 * se_mask programs up to 2 SH in the upper and lower 16 bits.
+	 *
+	 * Examples
+	 * Assuming 1 SH/SE, 4 SEs:
+	 * cu_mask[0] bit0 -> se_mask[0] bit0
+	 * cu_mask[0] bit1 -> se_mask[1] bit0
+	 * ...
+	 * cu_mask[0] bit4 -> se_mask[0] bit1
+	 * ...
+	 *
+	 * Assuming 2 SH/SE, 4 SEs
+	 * cu_mask[0] bit0 -> se_mask[0] bit0 (SE0,SH0,CU0)
+	 * cu_mask[0] bit1 -> se_mask[1] bit0 (SE1,SH0,CU0)
+	 * ...
+	 * cu_mask[0] bit4 -> se_mask[0] bit16 (SE0,SH1,CU0)
+	 * cu_mask[0] bit5 -> se_mask[1] bit16 (SE1,SH1,CU0)
+	 * ...
+	 * cu_mask[0] bit8 -> se_mask[0] bit1 (SE0,SH0,CU1)
 	 * ...
+	 *
+	 * First ensure all CUs are disabled, then enable user specified CUs.
 	 */
-	se = 0;
-	for (i = 0; i < cu_mask_count; i++) {
-		if (cu_mask[i / 32] & (1 << (i % 32)))
-			se_mask[se] |= 1 << cu;
-
-		do {
-			se++;
-			if (se == cu_info.num_shader_engines) {
-				se = 0;
-				cu++;
+	for (i = 0; i < cu_info.num_shader_engines; i++)
+		se_mask[i] = 0;
+
+	i = 0;
+	for (cu = 0; cu < 16; cu++) {
+		for (sh = 0; sh < cu_info.num_shader_arrays_per_engine; sh++) {
+			for (se = 0; se < cu_info.num_shader_engines; se++) {
+				if (cu_per_sh[se][sh] > cu) {
+					if (cu_mask[i / 32] & (1 << (i % 32)))
+						se_mask[se] |= 1 << (cu + sh * 16);
+					i++;
+					if (i == cu_mask_count)
+						return;
+				}
 			}
-		} while (cu >= cu_per_se[se] && cu < 32);
+		}
 	}
 }
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h
index b5e2ea7550d4..6e6918ccedfd 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h
@@ -27,6 +27,7 @@
 #include "kfd_priv.h"
 
 #define KFD_MAX_NUM_SE 8
+#define KFD_MAX_NUM_SH_PER_SE 2
 
 /**
  * struct mqd_manager
-- 
2.30.2