[PATCH 13/15] drm/amd/display: Remove freesync video mode amdgpu parameter

[Stylon Wang <stylon.wang@amd.com>]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[Why&How]
Freesync Video mode was enabled by default. Hence no need for the module
parameter, so remove it completely

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Stylon Wang <stylon.wang@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h     |  1 -
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 27 -------------------------
 2 files changed, 28 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 2e3c7c15cb8e..4de074243c4d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -193,7 +193,6 @@ extern int amdgpu_emu_mode;
 extern uint amdgpu_smu_memory_pool_size;
 extern int amdgpu_smu_pptable_id;
 extern uint amdgpu_dc_feature_mask;
-extern uint amdgpu_freesync_vid_mode;
 extern uint amdgpu_dc_debug_mask;
 extern uint amdgpu_dc_visual_confirm;
 extern uint amdgpu_dm_abm_level;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 0fec81d6a7df..8f7d0f8e57ae 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -187,7 +187,6 @@ int amdgpu_mes_kiq;
 int amdgpu_noretry = -1;
 int amdgpu_force_asic_type = -1;
 int amdgpu_tmz = -1; /* auto */
-uint amdgpu_freesync_vid_mode;
 int amdgpu_reset_method = -1; /* auto */
 int amdgpu_num_kcq = -1;
 int amdgpu_smartshift_bias;
@@ -885,32 +884,6 @@ module_param_named(backlight, amdgpu_backlight, bint, 0444);
 MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)");
 module_param_named(tmz, amdgpu_tmz, int, 0444);
 
-/**
- * DOC: freesync_video (uint)
- * Enable the optimization to adjust front porch timing to achieve seamless
- * mode change experience when setting a freesync supported mode for which full
- * modeset is not needed.
- *
- * The Display Core will add a set of modes derived from the base FreeSync
- * video mode into the corresponding connector's mode list based on commonly
- * used refresh rates and VRR range of the connected display, when users enable
- * this feature. From the userspace perspective, they can see a seamless mode
- * change experience when the change between different refresh rates under the
- * same resolution. Additionally, userspace applications such as Video playback
- * can read this modeset list and change the refresh rate based on the video
- * frame rate. Finally, the userspace can also derive an appropriate mode for a
- * particular refresh rate based on the FreeSync Mode and add it to the
- * connector's mode list.
- *
- * Note: This is an experimental feature.
- *
- * The default value: 0 (off).
- */
-MODULE_PARM_DESC(
-	freesync_video,
-	"Enable freesync modesetting optimization feature (0 = off (default), 1 = on)");
-module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
-
 /**
  * DOC: reset_method (int)
  * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
-- 
2.41.0