* [PATCH] drm/amd/pm: Add reset option for fan_curve on smu13_0_0
@ 2023-09-11 5:53 Ma Jun
2023-09-18 14:05 ` Alex Deucher
0 siblings, 1 reply; 4+ messages in thread
From: Ma Jun @ 2023-09-11 5:53 UTC (permalink / raw)
To: amd-gfx, Alexander.Deucher; +Cc: Ma Jun
Add reset option for fan_curve.
User can use command "echo r > fan_cure" to reset the fan_curve
to boot value
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
---
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 8 ++++
.../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 43 +++++++++++++++++--
2 files changed, 47 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index d05d9cd61331..2acac21387bc 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -3437,6 +3437,11 @@ static int parse_input_od_command_lines(const char *buf,
case 'c':
*type = PP_OD_COMMIT_DPM_TABLE;
return 0;
+ case 'r':
+ params[parameter_size] = *type;
+ *num_of_params = 1;
+ *type = PP_OD_RESTORE_DEFAULT_TABLE;
+ return 0;
default:
break;
}
@@ -3531,6 +3536,9 @@ amdgpu_distribute_custom_od_settings(struct amdgpu_device *adev,
* When you have finished the editing, write "c" (commit) to the file to commit
* your changes.
*
+ * If you want to reset to the default value, write "r" (reset) to the file to
+ * reset them
+ *
* There are two fan control modes supported: auto and manual. With auto mode,
* PMFW handles the fan speed control(how fan speed reacts to ASIC temperature).
* While with manual mode, users can set their own fan curve line as what
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
index a719bae54e2c..644773c4bccb 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
@@ -1484,6 +1484,36 @@ static int smu_v13_0_0_print_clk_levels(struct smu_context *smu,
return size;
}
+
+static int smu_v13_0_0_od_restore_table_single(struct smu_context *smu, long input)
+{
+ struct smu_table_context *table_context = &smu->smu_table;
+ OverDriveTableExternal_t *boot_overdrive_table =
+ (OverDriveTableExternal_t *)table_context->boot_overdrive_table;
+ OverDriveTableExternal_t *od_table =
+ (OverDriveTableExternal_t *)table_context->overdrive_table;
+ struct amdgpu_device *adev = smu->adev;
+ int i;
+
+ switch (input) {
+ case PP_OD_EDIT_FAN_CURVE:
+ for (i = 0; i < NUM_OD_FAN_MAX_POINTS; i++) {
+ od_table->OverDriveTable.FanLinearTempPoints[i] =
+ boot_overdrive_table->OverDriveTable.FanLinearTempPoints[i];
+ od_table->OverDriveTable.FanLinearPwmPoints[i] =
+ boot_overdrive_table->OverDriveTable.FanLinearPwmPoints[i];
+ }
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+ default:
+ dev_info(adev->dev, "Invalid table index: %ld\n", input);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
enum PP_OD_DPM_TABLE_COMMAND type,
long input[],
@@ -1770,13 +1800,18 @@ static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
break;
case PP_OD_RESTORE_DEFAULT_TABLE:
- feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
- memcpy(od_table,
+ if (size == 1) {
+ ret = smu_v13_0_0_od_restore_table_single(smu, input[0]);
+ if (ret)
+ return ret;
+ } else {
+ feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
+ memcpy(od_table,
table_context->boot_overdrive_table,
sizeof(OverDriveTableExternal_t));
- od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
+ od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
+ }
fallthrough;
-
case PP_OD_COMMIT_DPM_TABLE:
/*
* The member below instructs PMFW the settings focused in
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/amd/pm: Add reset option for fan_curve on smu13_0_0
2023-09-11 5:53 [PATCH] drm/amd/pm: Add reset option for fan_curve on smu13_0_0 Ma Jun
@ 2023-09-18 14:05 ` Alex Deucher
2023-09-20 3:00 ` Ma, Jun
0 siblings, 1 reply; 4+ messages in thread
From: Alex Deucher @ 2023-09-18 14:05 UTC (permalink / raw)
To: Ma Jun; +Cc: Alexander.Deucher, amd-gfx
On Mon, Sep 11, 2023 at 2:00 AM Ma Jun <Jun.Ma2@amd.com> wrote:
>
> Add reset option for fan_curve.
> User can use command "echo r > fan_cure" to reset the fan_curve
> to boot value
>
> Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
> ---
> drivers/gpu/drm/amd/pm/amdgpu_pm.c | 8 ++++
> .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 43 +++++++++++++++++--
> 2 files changed, 47 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> index d05d9cd61331..2acac21387bc 100644
> --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> @@ -3437,6 +3437,11 @@ static int parse_input_od_command_lines(const char *buf,
> case 'c':
> *type = PP_OD_COMMIT_DPM_TABLE;
> return 0;
> + case 'r':
> + params[parameter_size] = *type;
> + *num_of_params = 1;
> + *type = PP_OD_RESTORE_DEFAULT_TABLE;
> + return 0;
> default:
> break;
> }
> @@ -3531,6 +3536,9 @@ amdgpu_distribute_custom_od_settings(struct amdgpu_device *adev,
> * When you have finished the editing, write "c" (commit) to the file to commit
> * your changes.
> *
> + * If you want to reset to the default value, write "r" (reset) to the file to
> + * reset them
> + *
> * There are two fan control modes supported: auto and manual. With auto mode,
> * PMFW handles the fan speed control(how fan speed reacts to ASIC temperature).
> * While with manual mode, users can set their own fan curve line as what
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> index a719bae54e2c..644773c4bccb 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> @@ -1484,6 +1484,36 @@ static int smu_v13_0_0_print_clk_levels(struct smu_context *smu,
> return size;
> }
>
> +
> +static int smu_v13_0_0_od_restore_table_single(struct smu_context *smu, long input)
> +{
> + struct smu_table_context *table_context = &smu->smu_table;
> + OverDriveTableExternal_t *boot_overdrive_table =
> + (OverDriveTableExternal_t *)table_context->boot_overdrive_table;
> + OverDriveTableExternal_t *od_table =
> + (OverDriveTableExternal_t *)table_context->overdrive_table;
> + struct amdgpu_device *adev = smu->adev;
> + int i;
> +
> + switch (input) {
> + case PP_OD_EDIT_FAN_CURVE:
> + for (i = 0; i < NUM_OD_FAN_MAX_POINTS; i++) {
> + od_table->OverDriveTable.FanLinearTempPoints[i] =
> + boot_overdrive_table->OverDriveTable.FanLinearTempPoints[i];
> + od_table->OverDriveTable.FanLinearPwmPoints[i] =
> + boot_overdrive_table->OverDriveTable.FanLinearPwmPoints[i];
> + }
> + od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
> + od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
> + break;
> + default:
> + dev_info(adev->dev, "Invalid table index: %ld\n", input);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
> enum PP_OD_DPM_TABLE_COMMAND type,
> long input[],
> @@ -1770,13 +1800,18 @@ static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
> break;
>
> case PP_OD_RESTORE_DEFAULT_TABLE:
> - feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
> - memcpy(od_table,
> + if (size == 1) {
> + ret = smu_v13_0_0_od_restore_table_single(smu, input[0]);
> + if (ret)
> + return ret;
> + } else {
> + feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
> + memcpy(od_table,
> table_context->boot_overdrive_table,
> sizeof(OverDriveTableExternal_t));
> - od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
> + od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
> + }
> fallthrough;
I'm not sure the fallthrough here is correct. I think setting the
reset should just reset the values, but you'd still need to commit to
actually set them to the firmware. Double check that the behavior is
consistent with older chips.
Alex
> -
> case PP_OD_COMMIT_DPM_TABLE:
> /*
> * The member below instructs PMFW the settings focused in
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/amd/pm: Add reset option for fan_curve on smu13_0_0
2023-09-18 14:05 ` Alex Deucher
@ 2023-09-20 3:00 ` Ma, Jun
2023-09-20 14:05 ` Alex Deucher
0 siblings, 1 reply; 4+ messages in thread
From: Ma, Jun @ 2023-09-20 3:00 UTC (permalink / raw)
To: Alex Deucher, Ma Jun; +Cc: Alexander.Deucher, amd-gfx
Hi Alex,
On 9/18/2023 10:05 PM, Alex Deucher wrote:
> On Mon, Sep 11, 2023 at 2:00 AM Ma Jun <Jun.Ma2@amd.com> wrote:
>>
>> Add reset option for fan_curve.
>> User can use command "echo r > fan_cure" to reset the fan_curve
>> to boot value
>>
>> Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
>> ---
>> drivers/gpu/drm/amd/pm/amdgpu_pm.c | 8 ++++
>> .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 43 +++++++++++++++++--
>> 2 files changed, 47 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
>> index d05d9cd61331..2acac21387bc 100644
>> --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
>> +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
>> @@ -3437,6 +3437,11 @@ static int parse_input_od_command_lines(const char *buf,
>> case 'c':
>> *type = PP_OD_COMMIT_DPM_TABLE;
>> return 0;
>> + case 'r':
>> + params[parameter_size] = *type;
>> + *num_of_params = 1;
>> + *type = PP_OD_RESTORE_DEFAULT_TABLE;
>> + return 0;
>> default:
>> break;
>> }
>> @@ -3531,6 +3536,9 @@ amdgpu_distribute_custom_od_settings(struct amdgpu_device *adev,
>> * When you have finished the editing, write "c" (commit) to the file to commit
>> * your changes.
>> *
>> + * If you want to reset to the default value, write "r" (reset) to the file to
>> + * reset them
>> + *
>> * There are two fan control modes supported: auto and manual. With auto mode,
>> * PMFW handles the fan speed control(how fan speed reacts to ASIC temperature).
>> * While with manual mode, users can set their own fan curve line as what
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
>> index a719bae54e2c..644773c4bccb 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
>> @@ -1484,6 +1484,36 @@ static int smu_v13_0_0_print_clk_levels(struct smu_context *smu,
>> return size;
>> }
>>
>> +
>> +static int smu_v13_0_0_od_restore_table_single(struct smu_context *smu, long input)
>> +{
>> + struct smu_table_context *table_context = &smu->smu_table;
>> + OverDriveTableExternal_t *boot_overdrive_table =
>> + (OverDriveTableExternal_t *)table_context->boot_overdrive_table;
>> + OverDriveTableExternal_t *od_table =
>> + (OverDriveTableExternal_t *)table_context->overdrive_table;
>> + struct amdgpu_device *adev = smu->adev;
>> + int i;
>> +
>> + switch (input) {
>> + case PP_OD_EDIT_FAN_CURVE:
>> + for (i = 0; i < NUM_OD_FAN_MAX_POINTS; i++) {
>> + od_table->OverDriveTable.FanLinearTempPoints[i] =
>> + boot_overdrive_table->OverDriveTable.FanLinearTempPoints[i];
>> + od_table->OverDriveTable.FanLinearPwmPoints[i] =
>> + boot_overdrive_table->OverDriveTable.FanLinearPwmPoints[i];
>> + }
>> + od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
>> + od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
>> + break;
>> + default:
>> + dev_info(adev->dev, "Invalid table index: %ld\n", input);
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
>> enum PP_OD_DPM_TABLE_COMMAND type,
>> long input[],
>> @@ -1770,13 +1800,18 @@ static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
>> break;
>>
>> case PP_OD_RESTORE_DEFAULT_TABLE:
>> - feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
>> - memcpy(od_table,
>> + if (size == 1) {
>> + ret = smu_v13_0_0_od_restore_table_single(smu, input[0]);
>> + if (ret)
>> + return ret;
>> + } else {
>> + feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
>> + memcpy(od_table,
>> table_context->boot_overdrive_table,
>> sizeof(OverDriveTableExternal_t));
>> - od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
>> + od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
>> + }
>> fallthrough;
>
> I'm not sure the fallthrough here is correct. I think setting the
> reset should just reset the values, but you'd still need to commit to
> actually set them to the firmware. Double check that the behavior is
> consistent with older chips.
>
We also use the "fallthrough" in sienna_cichlid_od_edit_dpm_table() and
smu_v13_0_7_od_edit_dpm_table().
But other chips used "break" here for reset. I think user maybe need
to use command " echo r > xx" and "echo c > xx" to reset.
So, It seems that it makes more sense to use "fallthrough" here.
Regards,
Ma Jun
> Alex
>
>
>> -
>> case PP_OD_COMMIT_DPM_TABLE:
>> /*
>> * The member below instructs PMFW the settings focused in
>> --
>> 2.34.1
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/amd/pm: Add reset option for fan_curve on smu13_0_0
2023-09-20 3:00 ` Ma, Jun
@ 2023-09-20 14:05 ` Alex Deucher
0 siblings, 0 replies; 4+ messages in thread
From: Alex Deucher @ 2023-09-20 14:05 UTC (permalink / raw)
To: Ma, Jun; +Cc: Alexander.Deucher, Ma Jun, amd-gfx
On Tue, Sep 19, 2023 at 11:00 PM Ma, Jun <majun@amd.com> wrote:
>
> Hi Alex,
>
> On 9/18/2023 10:05 PM, Alex Deucher wrote:
> > On Mon, Sep 11, 2023 at 2:00 AM Ma Jun <Jun.Ma2@amd.com> wrote:
> >>
> >> Add reset option for fan_curve.
> >> User can use command "echo r > fan_cure" to reset the fan_curve
> >> to boot value
> >>
> >> Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
> >> ---
> >> drivers/gpu/drm/amd/pm/amdgpu_pm.c | 8 ++++
> >> .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 43 +++++++++++++++++--
> >> 2 files changed, 47 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> >> index d05d9cd61331..2acac21387bc 100644
> >> --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> >> +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> >> @@ -3437,6 +3437,11 @@ static int parse_input_od_command_lines(const char *buf,
> >> case 'c':
> >> *type = PP_OD_COMMIT_DPM_TABLE;
> >> return 0;
> >> + case 'r':
> >> + params[parameter_size] = *type;
> >> + *num_of_params = 1;
> >> + *type = PP_OD_RESTORE_DEFAULT_TABLE;
> >> + return 0;
> >> default:
> >> break;
> >> }
> >> @@ -3531,6 +3536,9 @@ amdgpu_distribute_custom_od_settings(struct amdgpu_device *adev,
> >> * When you have finished the editing, write "c" (commit) to the file to commit
> >> * your changes.
> >> *
> >> + * If you want to reset to the default value, write "r" (reset) to the file to
> >> + * reset them
> >> + *
> >> * There are two fan control modes supported: auto and manual. With auto mode,
> >> * PMFW handles the fan speed control(how fan speed reacts to ASIC temperature).
> >> * While with manual mode, users can set their own fan curve line as what
> >> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> >> index a719bae54e2c..644773c4bccb 100644
> >> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> >> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
> >> @@ -1484,6 +1484,36 @@ static int smu_v13_0_0_print_clk_levels(struct smu_context *smu,
> >> return size;
> >> }
> >>
> >> +
> >> +static int smu_v13_0_0_od_restore_table_single(struct smu_context *smu, long input)
> >> +{
> >> + struct smu_table_context *table_context = &smu->smu_table;
> >> + OverDriveTableExternal_t *boot_overdrive_table =
> >> + (OverDriveTableExternal_t *)table_context->boot_overdrive_table;
> >> + OverDriveTableExternal_t *od_table =
> >> + (OverDriveTableExternal_t *)table_context->overdrive_table;
> >> + struct amdgpu_device *adev = smu->adev;
> >> + int i;
> >> +
> >> + switch (input) {
> >> + case PP_OD_EDIT_FAN_CURVE:
> >> + for (i = 0; i < NUM_OD_FAN_MAX_POINTS; i++) {
> >> + od_table->OverDriveTable.FanLinearTempPoints[i] =
> >> + boot_overdrive_table->OverDriveTable.FanLinearTempPoints[i];
> >> + od_table->OverDriveTable.FanLinearPwmPoints[i] =
> >> + boot_overdrive_table->OverDriveTable.FanLinearPwmPoints[i];
> >> + }
> >> + od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
> >> + od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
> >> + break;
> >> + default:
> >> + dev_info(adev->dev, "Invalid table index: %ld\n", input);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
> >> enum PP_OD_DPM_TABLE_COMMAND type,
> >> long input[],
> >> @@ -1770,13 +1800,18 @@ static int smu_v13_0_0_od_edit_dpm_table(struct smu_context *smu,
> >> break;
> >>
> >> case PP_OD_RESTORE_DEFAULT_TABLE:
> >> - feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
> >> - memcpy(od_table,
> >> + if (size == 1) {
> >> + ret = smu_v13_0_0_od_restore_table_single(smu, input[0]);
> >> + if (ret)
> >> + return ret;
> >> + } else {
> >> + feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
> >> + memcpy(od_table,
> >> table_context->boot_overdrive_table,
> >> sizeof(OverDriveTableExternal_t));
> >> - od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
> >> + od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
> >> + }
> >> fallthrough;
> >
> > I'm not sure the fallthrough here is correct. I think setting the
> > reset should just reset the values, but you'd still need to commit to
> > actually set them to the firmware. Double check that the behavior is
> > consistent with older chips.
> >
>
> We also use the "fallthrough" in sienna_cichlid_od_edit_dpm_table() and
> smu_v13_0_7_od_edit_dpm_table().
>
> But other chips used "break" here for reset. I think user maybe need
> to use command " echo r > xx" and "echo c > xx" to reset.
>
> So, It seems that it makes more sense to use "fallthrough" here.
>
I guess if that's what we do for seinna_cichlid, it's fine. Too bad
we lost consistency here.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
> Regards,
> Ma Jun
>
> > Alex
> >
> >
> >> -
> >> case PP_OD_COMMIT_DPM_TABLE:
> >> /*
> >> * The member below instructs PMFW the settings focused in
> >> --
> >> 2.34.1
> >>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-09-20 14:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-09-11 5:53 [PATCH] drm/amd/pm: Add reset option for fan_curve on smu13_0_0 Ma Jun
2023-09-18 14:05 ` Alex Deucher
2023-09-20 3:00 ` Ma, Jun
2023-09-20 14:05 ` Alex Deucher
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox