From: Felix Kuehling <felix.kuehling@amd.com>
To: Jonathan Kim <jonathan.kim@amd.com>,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Jinhuieric.Huang@amd.com
Subject: Re: [PATCH 02/33] drm/amdkfd: display debug capabilities
Date: Tue, 30 May 2023 15:20:20 -0400 [thread overview]
Message-ID: <4c2d8556-1ec9-fb30-97c4-98c93405a2b0@amd.com> (raw)
In-Reply-To: <20230525172745.702700-2-jonathan.kim@amd.com>
Am 2023-05-25 um 13:27 schrieb Jonathan Kim:
> Expose debug capabilities in the KFD topology node's HSA capabilities and
> debug properties flags.
>
> Ensure correct capabilities are exposed based on firmware support.
>
> Flag definitions can be referenced in uapi/linux/kfd_sysfs.h.
>
> v2: rebase topology fw check fix with kfd_node struct update
>
> Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
> ---
> drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 101 ++++++++++++++++++++--
> drivers/gpu/drm/amd/amdkfd/kfd_topology.h | 6 ++
> include/uapi/linux/kfd_sysfs.h | 15 ++++
> 3 files changed, 117 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
> index 8302d8967158..3def25b2bdbb 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
> @@ -535,6 +535,8 @@ static ssize_t node_show(struct kobject *kobj, struct attribute *attr,
> dev->gpu->kfd->mec_fw_version);
> sysfs_show_32bit_prop(buffer, offs, "capability",
> dev->node_props.capability);
> + sysfs_show_64bit_prop(buffer, offs, "debug_prop",
> + dev->node_props.debug_prop);
> sysfs_show_32bit_prop(buffer, offs, "sdma_fw_version",
> dev->gpu->kfd->sdma_fw_version);
> sysfs_show_64bit_prop(buffer, offs, "unique_id",
> @@ -1857,6 +1859,97 @@ static int kfd_topology_add_device_locked(struct kfd_node *gpu, uint32_t gpu_id,
> return res;
> }
>
> +static void kfd_topology_set_dbg_firmware_support(struct kfd_topology_device *dev)
> +{
> + bool firmware_supported = true;
> +
> + if (KFD_GC_VERSION(dev->gpu) >= IP_VERSION(11, 0, 0) &&
> + KFD_GC_VERSION(dev->gpu) < IP_VERSION(12, 0, 0)) {
> + firmware_supported =
> + (dev->gpu->adev->mes.sched_version & AMDGPU_MES_VERSION_MASK) >= 9;
> + goto out;
> + }
> +
> + /*
> + * Note: Any unlisted devices here are assumed to support exception handling.
> + * Add additional checks here as needed.
> + */
> + switch (KFD_GC_VERSION(dev->gpu)) {
> + case IP_VERSION(9, 0, 1):
> + firmware_supported = dev->gpu->kfd->mec_fw_version >= 459 + 32768;
> + break;
> + case IP_VERSION(9, 1, 0):
> + case IP_VERSION(9, 2, 1):
> + case IP_VERSION(9, 2, 2):
> + case IP_VERSION(9, 3, 0):
> + case IP_VERSION(9, 4, 0):
> + firmware_supported = dev->gpu->kfd->mec_fw_version >= 459;
> + break;
> + case IP_VERSION(9, 4, 1):
> + firmware_supported = dev->gpu->kfd->mec_fw_version >= 60;
> + break;
> + case IP_VERSION(9, 4, 2):
> + firmware_supported = dev->gpu->kfd->mec_fw_version >= 51;
> + break;
> + case IP_VERSION(10, 1, 10):
> + case IP_VERSION(10, 1, 2):
> + case IP_VERSION(10, 1, 1):
> + firmware_supported = dev->gpu->kfd->mec_fw_version >= 144;
> + break;
> + case IP_VERSION(10, 3, 0):
> + case IP_VERSION(10, 3, 2):
> + case IP_VERSION(10, 3, 1):
> + case IP_VERSION(10, 3, 4):
> + case IP_VERSION(10, 3, 5):
> + firmware_supported = dev->gpu->kfd->mec_fw_version >= 89;
> + break;
> + case IP_VERSION(10, 1, 3):
> + case IP_VERSION(10, 3, 3):
> + firmware_supported = false;
> + break;
> + default:
> + break;
> + }
> +
> +out:
> + if (firmware_supported)
> + dev->node_props.capability |= HSA_CAP_TRAP_DEBUG_FIRMWARE_SUPPORTED;
> +}
> +
> +static void kfd_topology_set_capabilities(struct kfd_topology_device *dev)
> +{
> + dev->node_props.capability |= ((HSA_CAP_DOORBELL_TYPE_2_0 <<
> + HSA_CAP_DOORBELL_TYPE_TOTALBITS_SHIFT) &
> + HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK);
> +
> + dev->node_props.capability |= HSA_CAP_TRAP_DEBUG_SUPPORT |
> + HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_TRAP_OVERRIDE_SUPPORTED |
> + HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_MODE_SUPPORTED;
> +
> + if (KFD_GC_VERSION(dev->gpu) < IP_VERSION(10, 0, 0)) {
> + dev->node_props.debug_prop |= HSA_DBG_WATCH_ADDR_MASK_LO_BIT_GFX9 |
> + HSA_DBG_WATCH_ADDR_MASK_HI_BIT;
> +
> + if (KFD_GC_VERSION(dev->gpu) < IP_VERSION(9, 4, 2))
> + dev->node_props.debug_prop |=
> + HSA_DBG_DISPATCH_INFO_ALWAYS_VALID;
> + else
> + dev->node_props.capability |=
> + HSA_CAP_TRAP_DEBUG_PRECISE_MEMORY_OPERATIONS_SUPPORTED;
> + } else {
> + dev->node_props.debug_prop |= HSA_DBG_WATCH_ADDR_MASK_LO_BIT_GFX10 |
> + HSA_DBG_WATCH_ADDR_MASK_HI_BIT;
> +
> + if (KFD_GC_VERSION(dev->gpu) < IP_VERSION(11, 0, 0))
> + dev->node_props.debug_prop |= HSA_DBG_DISPATCH_INFO_ALWAYS_VALID;
> + else
> + dev->node_props.capability |=
> + HSA_CAP_TRAP_DEBUG_PRECISE_MEMORY_OPERATIONS_SUPPORTED;
> + }
> +
> + kfd_topology_set_dbg_firmware_support(dev);
> +}
> +
> int kfd_topology_add_device(struct kfd_node *gpu)
> {
> uint32_t gpu_id;
> @@ -1967,13 +2060,11 @@ int kfd_topology_add_device(struct kfd_node *gpu)
> HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK);
> break;
> default:
> - if (KFD_GC_VERSION(dev->gpu) >= IP_VERSION(9, 0, 1))
> - dev->node_props.capability |= ((HSA_CAP_DOORBELL_TYPE_2_0 <<
> - HSA_CAP_DOORBELL_TYPE_TOTALBITS_SHIFT) &
> - HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK);
> - else
> + if (KFD_GC_VERSION(dev->gpu) < IP_VERSION(9, 0, 1))
> WARN(1, "Unexpected ASIC family %u",
> dev->gpu->adev->asic_type);
> + else
> + kfd_topology_set_capabilities(dev);
> }
>
> /*
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
> index 3b8afb6aba79..cba2cd5ed9d1 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
> @@ -31,6 +31,11 @@
>
> #define KFD_TOPOLOGY_PUBLIC_NAME_SIZE 32
>
> +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_GFX9 6
> +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_GFX10 7
> +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT \
> + (29 << HSA_DBG_WATCH_ADDR_MASK_HI_BIT_SHIFT)
> +
> struct kfd_node_properties {
> uint64_t hive_id;
> uint32_t cpu_cores_count;
> @@ -42,6 +47,7 @@ struct kfd_node_properties {
> uint32_t cpu_core_id_base;
> uint32_t simd_id_base;
> uint32_t capability;
> + uint64_t debug_prop;
> uint32_t max_waves_per_simd;
> uint32_t lds_size_in_kb;
> uint32_t gds_size_in_kb;
> diff --git a/include/uapi/linux/kfd_sysfs.h b/include/uapi/linux/kfd_sysfs.h
> index 3e330f368917..a51b7331e0b4 100644
> --- a/include/uapi/linux/kfd_sysfs.h
> +++ b/include/uapi/linux/kfd_sysfs.h
> @@ -43,6 +43,11 @@
> #define HSA_CAP_DOORBELL_TYPE_2_0 0x2
> #define HSA_CAP_AQL_QUEUE_DOUBLE_MAP 0x00004000
>
> +#define HSA_CAP_TRAP_DEBUG_SUPPORT 0x00008000
> +#define HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_TRAP_OVERRIDE_SUPPORTED 0x00010000
> +#define HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_MODE_SUPPORTED 0x00020000
> +#define HSA_CAP_TRAP_DEBUG_PRECISE_MEMORY_OPERATIONS_SUPPORTED 0x00040000
> +
> /* Old buggy user mode depends on this being 0 */
> #define HSA_CAP_RESERVED_WAS_SRAM_EDCSUPPORTED 0x00080000
>
> @@ -53,8 +58,18 @@
> #define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000
> #define HSA_CAP_SVMAPI_SUPPORTED 0x08000000
> #define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000
> +#define HSA_CAP_TRAP_DEBUG_FIRMWARE_SUPPORTED 0x20000000
> #define HSA_CAP_RESERVED 0xe00f8000
>
> +/* debug_prop bits in node properties */
> +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_MASK 0x0000000f
> +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_SHIFT 0
> +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT_MASK 0x000003f0
> +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT_SHIFT 4
> +#define HSA_DBG_DISPATCH_INFO_ALWAYS_VALID 0x00000400
> +#define HSA_DBG_WATCHPOINTS_EXCLUSIVE 0x00000800
> +#define HSA_DBG_RESERVED 0xfffffffffffff000ull
> +
> /* Heap types in memory properties */
> #define HSA_MEM_HEAP_TYPE_SYSTEM 0
> #define HSA_MEM_HEAP_TYPE_FB_PUBLIC 1
next prev parent reply other threads:[~2023-05-30 19:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-25 17:27 [PATCH 01/33] drm/amdkfd: add debug and runtime enable interface Jonathan Kim
2023-05-25 17:27 ` [PATCH 02/33] drm/amdkfd: display debug capabilities Jonathan Kim
2023-05-30 19:20 ` Felix Kuehling [this message]
2023-05-25 17:27 ` [PATCH 03/33] drm/amdkfd: prepare per-process debug enable and disable Jonathan Kim
2023-05-25 17:27 ` [PATCH 04/33] drm/amdgpu: add kgd hw debug mode setting interface Jonathan Kim
2023-05-25 17:27 ` [PATCH 05/33] drm/amdgpu: setup hw debug registers on driver initialization Jonathan Kim
2023-05-30 19:23 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 06/33] drm/amdgpu: add gfx9 hw debug mode enable and disable calls Jonathan Kim
2023-05-25 17:27 ` [PATCH 07/33] drm/amdgpu: add gfx9.4.1 " Jonathan Kim
2023-05-25 17:27 ` [PATCH 08/33] drm/amdkfd: fix kfd_suspend_all_processes Jonathan Kim
2023-05-25 17:27 ` [PATCH 09/33] drm/amdgpu: add gfx10 hw debug mode enable and disable calls Jonathan Kim
2023-05-25 17:27 ` [PATCH 10/33] drm/amdgpu: add gfx9.4.2 " Jonathan Kim
2023-05-25 17:27 ` [PATCH 11/33] drm/amdgpu: add gfx11 " Jonathan Kim
2023-05-25 17:27 ` [PATCH 12/33] drm/amdgpu: add configurable grace period for unmap queues Jonathan Kim
2023-05-30 19:28 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 13/33] drm/amdkfd: prepare map process for single process debug devices Jonathan Kim
2023-05-30 19:36 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 14/33] drm/amdgpu: prepare map process for multi-process " Jonathan Kim
2023-05-30 19:55 ` Felix Kuehling
2023-05-30 19:58 ` Kim, Jonathan
2023-05-25 17:27 ` [PATCH 15/33] drm/amdgpu: expose debug api for mes Jonathan Kim
2023-05-25 17:27 ` [PATCH 16/33] drm/amdkfd: add per process hw trap enable and disable functions Jonathan Kim
2023-05-30 20:04 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 17/33] drm/amdkfd: apply trap workaround for gfx11 Jonathan Kim
2023-05-25 17:27 ` [PATCH 18/33] drm/amdkfd: add raise exception event function Jonathan Kim
2023-05-30 20:07 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 19/33] drm/amdkfd: add send exception operation Jonathan Kim
2023-05-25 17:27 ` [PATCH 20/33] drm/amdkfd: add runtime enable operation Jonathan Kim
2023-05-30 20:11 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 21/33] drm/amdkfd: add debug trap enabled flag to tma Jonathan Kim
2023-05-25 17:27 ` [PATCH 22/33] drm/amdkfd: update process interrupt handling for debug events Jonathan Kim
2023-05-30 20:16 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 23/33] drm/amdkfd: add debug set exceptions enabled operation Jonathan Kim
2023-05-25 17:27 ` [PATCH 24/33] drm/amdkfd: add debug wave launch override operation Jonathan Kim
2023-05-30 20:21 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 25/33] drm/amdkfd: add debug wave launch mode operation Jonathan Kim
2023-05-30 20:22 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 26/33] drm/amdkfd: add debug suspend and resume process queues operation Jonathan Kim
2023-05-30 20:24 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 27/33] drm/amdkfd: add debug set and clear address watch points operation Jonathan Kim
2023-05-30 20:26 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 28/33] drm/amdkfd: add debug set flags operation Jonathan Kim
2023-05-30 20:30 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 29/33] drm/amdkfd: add debug query event operation Jonathan Kim
2023-05-25 17:27 ` [PATCH 30/33] drm/amdkfd: add debug query exception info operation Jonathan Kim
2023-05-25 17:27 ` [PATCH 31/33] drm/amdkfd: add debug queue snapshot operation Jonathan Kim
2023-05-25 17:27 ` [PATCH 32/33] drm/amdkfd: add debug device " Jonathan Kim
2023-05-30 20:31 ` Felix Kuehling
2023-05-25 17:27 ` [PATCH 33/33] drm/amdkfd: bump kfd ioctl minor version for debug api availability Jonathan Kim
2023-05-30 19:17 ` [PATCH 01/33] drm/amdkfd: add debug and runtime enable interface Felix Kuehling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4c2d8556-1ec9-fb30-97c4-98c93405a2b0@amd.com \
--to=felix.kuehling@amd.com \
--cc=Jinhuieric.Huang@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jonathan.kim@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox