* Re: [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds
2025-09-25 13:03 [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds Christian König
@ 2025-10-06 9:57 ` Christian König
2025-10-06 12:47 ` Alex Deucher
2026-02-15 21:41 ` Mike Lothian
2 siblings, 0 replies; 5+ messages in thread
From: Christian König @ 2025-10-06 9:57 UTC (permalink / raw)
To: alexander.deucher; +Cc: amd-gfx
Ping?
On 25.09.25 15:03, Christian König wrote:
> There has been multiple complains that 10 seconds are usually to long.
>
> The original requirement for longer timeout came from compute tests on
> AMDVLK, since that is no longer a topic reduce the timeout back to 2
> seconds for all queues.
>
> While at it also remove any special handling for compute queues under
> SRIOV or pass through.
>
> Signed-off-by: Christian König <christian.koenig@amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 85 ++++++++++------------
> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 21 ++----
> 2 files changed, 48 insertions(+), 58 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> index a77000c2e0bb..ceb3c616292c 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -4278,58 +4278,53 @@ static int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
> long timeout;
> int ret = 0;
>
> - /*
> - * By default timeout for jobs is 10 sec
> - */
> - adev->compute_timeout = adev->gfx_timeout = msecs_to_jiffies(10000);
> - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
> + /* By default timeout for all queues is 2 sec */
> + adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
> + adev->video_timeout = msecs_to_jiffies(2000);
>
> - if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> - while ((timeout_setting = strsep(&input, ",")) &&
> - strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> - ret = kstrtol(timeout_setting, 0, &timeout);
> - if (ret)
> - return ret;
> + if (!strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
> + return 0;
>
> - if (timeout == 0) {
> - index++;
> - continue;
> - } else if (timeout < 0) {
> - timeout = MAX_SCHEDULE_TIMEOUT;
> - dev_warn(adev->dev, "lockup timeout disabled");
> - add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
> - } else {
> - timeout = msecs_to_jiffies(timeout);
> - }
> + while ((timeout_setting = strsep(&input, ",")) &&
> + strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> + ret = kstrtol(timeout_setting, 0, &timeout);
> + if (ret)
> + return ret;
>
> - switch (index++) {
> - case 0:
> - adev->gfx_timeout = timeout;
> - break;
> - case 1:
> - adev->compute_timeout = timeout;
> - break;
> - case 2:
> - adev->sdma_timeout = timeout;
> - break;
> - case 3:
> - adev->video_timeout = timeout;
> - break;
> - default:
> - break;
> - }
> + if (timeout == 0) {
> + index++;
> + continue;
> + } else if (timeout < 0) {
> + timeout = MAX_SCHEDULE_TIMEOUT;
> + dev_warn(adev->dev, "lockup timeout disabled");
> + add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
> + } else {
> + timeout = msecs_to_jiffies(timeout);
> }
> - /*
> - * There is only one value specified and
> - * it should apply to all non-compute jobs.
> - */
> - if (index == 1) {
> - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
> - if (amdgpu_sriov_vf(adev) || amdgpu_passthrough(adev))
> - adev->compute_timeout = adev->gfx_timeout;
> +
> + switch (index++) {
> + case 0:
> + adev->gfx_timeout = timeout;
> + break;
> + case 1:
> + adev->compute_timeout = timeout;
> + break;
> + case 2:
> + adev->sdma_timeout = timeout;
> + break;
> + case 3:
> + adev->video_timeout = timeout;
> + break;
> + default:
> + break;
> }
> }
>
> + /* When only one value specified apply it to all queues. */
> + if (index == 1)
> + adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
> + adev->video_timeout = timeout;
> +
> return ret;
> }
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index ece251cbe8c3..fe45dd1d979e 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -353,22 +353,17 @@ module_param_named(svm_default_granularity, amdgpu_svm_default_granularity, uint
> * DOC: lockup_timeout (string)
> * Set GPU scheduler timeout value in ms.
> *
> - * The format can be [Non-Compute] or [GFX,Compute,SDMA,Video]. That is there can be one or
> - * multiple values specified. 0 and negative values are invalidated. They will be adjusted
> - * to the default timeout.
> + * The format can be [single value] for setting all timeouts at once or
> + * [GFX,Compute,SDMA,Video] to set individual timeouts.
> + * Negative values mean infinity.
> *
> - * - With one value specified, the setting will apply to all non-compute jobs.
> - * - With multiple values specified, the first one will be for GFX.
> - * The second one is for Compute. The third and fourth ones are
> - * for SDMA and Video.
> - *
> - * By default(with no lockup_timeout settings), the timeout for all jobs is 10000.
> + * By default(with no lockup_timeout settings), the timeout for all queues is 2000.
> */
> MODULE_PARM_DESC(lockup_timeout,
> - "GPU lockup timeout in ms (default: 10000 for all jobs. "
> - "0: keep default value. negative: infinity timeout), format: for bare metal [Non-Compute] or [GFX,Compute,SDMA,Video]; "
> - "for passthrough or sriov [all jobs] or [GFX,Compute,SDMA,Video].");
> -module_param_string(lockup_timeout, amdgpu_lockup_timeout, sizeof(amdgpu_lockup_timeout), 0444);
> + "GPU lockup timeout in ms (default: 2000 for all queues. "
> + "0: keep default value. negative: infinity timeout), format: [single value for all] or [GFX,Compute,SDMA,Video].");
> +module_param_string(lockup_timeout, amdgpu_lockup_timeout,
> + sizeof(amdgpu_lockup_timeout), 0444);
>
> /**
> * DOC: dpm (int)
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds
2025-09-25 13:03 [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds Christian König
2025-10-06 9:57 ` Christian König
@ 2025-10-06 12:47 ` Alex Deucher
2026-02-15 21:41 ` Mike Lothian
2 siblings, 0 replies; 5+ messages in thread
From: Alex Deucher @ 2025-10-06 12:47 UTC (permalink / raw)
To: Christian König; +Cc: alexander.deucher, amd-gfx
On Thu, Sep 25, 2025 at 9:19 AM Christian König
<ckoenig.leichtzumerken@gmail.com> wrote:
>
> There has been multiple complains that 10 seconds are usually to long.
>
> The original requirement for longer timeout came from compute tests on
> AMDVLK, since that is no longer a topic reduce the timeout back to 2
> seconds for all queues.
>
> While at it also remove any special handling for compute queues under
> SRIOV or pass through.
>
> Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 85 ++++++++++------------
> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 21 ++----
> 2 files changed, 48 insertions(+), 58 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> index a77000c2e0bb..ceb3c616292c 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -4278,58 +4278,53 @@ static int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
> long timeout;
> int ret = 0;
>
> - /*
> - * By default timeout for jobs is 10 sec
> - */
> - adev->compute_timeout = adev->gfx_timeout = msecs_to_jiffies(10000);
> - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
> + /* By default timeout for all queues is 2 sec */
> + adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
> + adev->video_timeout = msecs_to_jiffies(2000);
>
> - if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> - while ((timeout_setting = strsep(&input, ",")) &&
> - strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> - ret = kstrtol(timeout_setting, 0, &timeout);
> - if (ret)
> - return ret;
> + if (!strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
> + return 0;
>
> - if (timeout == 0) {
> - index++;
> - continue;
> - } else if (timeout < 0) {
> - timeout = MAX_SCHEDULE_TIMEOUT;
> - dev_warn(adev->dev, "lockup timeout disabled");
> - add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
> - } else {
> - timeout = msecs_to_jiffies(timeout);
> - }
> + while ((timeout_setting = strsep(&input, ",")) &&
> + strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> + ret = kstrtol(timeout_setting, 0, &timeout);
> + if (ret)
> + return ret;
>
> - switch (index++) {
> - case 0:
> - adev->gfx_timeout = timeout;
> - break;
> - case 1:
> - adev->compute_timeout = timeout;
> - break;
> - case 2:
> - adev->sdma_timeout = timeout;
> - break;
> - case 3:
> - adev->video_timeout = timeout;
> - break;
> - default:
> - break;
> - }
> + if (timeout == 0) {
> + index++;
> + continue;
> + } else if (timeout < 0) {
> + timeout = MAX_SCHEDULE_TIMEOUT;
> + dev_warn(adev->dev, "lockup timeout disabled");
> + add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
> + } else {
> + timeout = msecs_to_jiffies(timeout);
> }
> - /*
> - * There is only one value specified and
> - * it should apply to all non-compute jobs.
> - */
> - if (index == 1) {
> - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
> - if (amdgpu_sriov_vf(adev) || amdgpu_passthrough(adev))
> - adev->compute_timeout = adev->gfx_timeout;
> +
> + switch (index++) {
> + case 0:
> + adev->gfx_timeout = timeout;
> + break;
> + case 1:
> + adev->compute_timeout = timeout;
> + break;
> + case 2:
> + adev->sdma_timeout = timeout;
> + break;
> + case 3:
> + adev->video_timeout = timeout;
> + break;
> + default:
> + break;
> }
> }
>
> + /* When only one value specified apply it to all queues. */
> + if (index == 1)
> + adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
> + adev->video_timeout = timeout;
> +
> return ret;
> }
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index ece251cbe8c3..fe45dd1d979e 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -353,22 +353,17 @@ module_param_named(svm_default_granularity, amdgpu_svm_default_granularity, uint
> * DOC: lockup_timeout (string)
> * Set GPU scheduler timeout value in ms.
> *
> - * The format can be [Non-Compute] or [GFX,Compute,SDMA,Video]. That is there can be one or
> - * multiple values specified. 0 and negative values are invalidated. They will be adjusted
> - * to the default timeout.
> + * The format can be [single value] for setting all timeouts at once or
> + * [GFX,Compute,SDMA,Video] to set individual timeouts.
> + * Negative values mean infinity.
> *
> - * - With one value specified, the setting will apply to all non-compute jobs.
> - * - With multiple values specified, the first one will be for GFX.
> - * The second one is for Compute. The third and fourth ones are
> - * for SDMA and Video.
> - *
> - * By default(with no lockup_timeout settings), the timeout for all jobs is 10000.
> + * By default(with no lockup_timeout settings), the timeout for all queues is 2000.
> */
> MODULE_PARM_DESC(lockup_timeout,
> - "GPU lockup timeout in ms (default: 10000 for all jobs. "
> - "0: keep default value. negative: infinity timeout), format: for bare metal [Non-Compute] or [GFX,Compute,SDMA,Video]; "
> - "for passthrough or sriov [all jobs] or [GFX,Compute,SDMA,Video].");
> -module_param_string(lockup_timeout, amdgpu_lockup_timeout, sizeof(amdgpu_lockup_timeout), 0444);
> + "GPU lockup timeout in ms (default: 2000 for all queues. "
> + "0: keep default value. negative: infinity timeout), format: [single value for all] or [GFX,Compute,SDMA,Video].");
> +module_param_string(lockup_timeout, amdgpu_lockup_timeout,
> + sizeof(amdgpu_lockup_timeout), 0444);
>
> /**
> * DOC: dpm (int)
> --
> 2.43.0
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds
2025-09-25 13:03 [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds Christian König
2025-10-06 9:57 ` Christian König
2025-10-06 12:47 ` Alex Deucher
@ 2026-02-15 21:41 ` Mike Lothian
2026-02-15 21:49 ` Mike Lothian
2 siblings, 1 reply; 5+ messages in thread
From: Mike Lothian @ 2026-02-15 21:41 UTC (permalink / raw)
To: Christian König; +Cc: alexander.deucher, amd-gfx
[-- Attachment #1: Type: text/plain, Size: 16688 bytes --]
On Thu, 25 Sept 2025 at 14:03, Christian König <
ckoenig.leichtzumerken@gmail.com> wrote:
> There has been multiple complains that 10 seconds are usually to long.
>
> The original requirement for longer timeout came from compute tests on
> AMDVLK, since that is no longer a topic reduce the timeout back to 2
> seconds for all queues.
>
> While at it also remove any special handling for compute queues under
> SRIOV or pass through.
>
> Signed-off-by: Christian König <christian.koenig@amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 85 ++++++++++------------
> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 21 ++----
> 2 files changed, 48 insertions(+), 58 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> index a77000c2e0bb..ceb3c616292c 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -4278,58 +4278,53 @@ static int
> amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
> long timeout;
> int ret = 0;
>
> - /*
> - * By default timeout for jobs is 10 sec
> - */
> - adev->compute_timeout = adev->gfx_timeout =
> msecs_to_jiffies(10000);
> - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
> + /* By default timeout for all queues is 2 sec */
> + adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
> + adev->video_timeout = msecs_to_jiffies(2000);
>
> - if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> - while ((timeout_setting = strsep(&input, ",")) &&
> - strnlen(timeout_setting,
> AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> - ret = kstrtol(timeout_setting, 0, &timeout);
> - if (ret)
> - return ret;
> + if (!strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
> + return 0;
>
> - if (timeout == 0) {
> - index++;
> - continue;
> - } else if (timeout < 0) {
> - timeout = MAX_SCHEDULE_TIMEOUT;
> - dev_warn(adev->dev, "lockup timeout
> disabled");
> - add_taint(TAINT_SOFTLOCKUP,
> LOCKDEP_STILL_OK);
> - } else {
> - timeout = msecs_to_jiffies(timeout);
> - }
> + while ((timeout_setting = strsep(&input, ",")) &&
> + strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
> + ret = kstrtol(timeout_setting, 0, &timeout);
> + if (ret)
> + return ret;
>
> - switch (index++) {
> - case 0:
> - adev->gfx_timeout = timeout;
> - break;
> - case 1:
> - adev->compute_timeout = timeout;
> - break;
> - case 2:
> - adev->sdma_timeout = timeout;
> - break;
> - case 3:
> - adev->video_timeout = timeout;
> - break;
> - default:
> - break;
> - }
> + if (timeout == 0) {
> + index++;
> + continue;
> + } else if (timeout < 0) {
> + timeout = MAX_SCHEDULE_TIMEOUT;
> + dev_warn(adev->dev, "lockup timeout disabled");
> + add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
> + } else {
> + timeout = msecs_to_jiffies(timeout);
> }
> - /*
> - * There is only one value specified and
> - * it should apply to all non-compute jobs.
> - */
> - if (index == 1) {
> - adev->sdma_timeout = adev->video_timeout =
> adev->gfx_timeout;
> - if (amdgpu_sriov_vf(adev) ||
> amdgpu_passthrough(adev))
> - adev->compute_timeout = adev->gfx_timeout;
> +
> + switch (index++) {
> + case 0:
> + adev->gfx_timeout = timeout;
> + break;
> + case 1:
> + adev->compute_timeout = timeout;
> + break;
> + case 2:
> + adev->sdma_timeout = timeout;
> + break;
> + case 3:
> + adev->video_timeout = timeout;
> + break;
> + default:
> + break;
> }
> }
>
> + /* When only one value specified apply it to all queues. */
> + if (index == 1)
> + adev->gfx_timeout = adev->compute_timeout =
> adev->sdma_timeout =
> + adev->video_timeout = timeout;
> +
> return ret;
> }
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index ece251cbe8c3..fe45dd1d979e 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -353,22 +353,17 @@ module_param_named(svm_default_granularity,
> amdgpu_svm_default_granularity, uint
> * DOC: lockup_timeout (string)
> * Set GPU scheduler timeout value in ms.
> *
> - * The format can be [Non-Compute] or [GFX,Compute,SDMA,Video]. That is
> there can be one or
> - * multiple values specified. 0 and negative values are invalidated. They
> will be adjusted
> - * to the default timeout.
> + * The format can be [single value] for setting all timeouts at once or
> + * [GFX,Compute,SDMA,Video] to set individual timeouts.
> + * Negative values mean infinity.
> *
> - * - With one value specified, the setting will apply to all non-compute
> jobs.
> - * - With multiple values specified, the first one will be for GFX.
> - * The second one is for Compute. The third and fourth ones are
> - * for SDMA and Video.
> - *
> - * By default(with no lockup_timeout settings), the timeout for all jobs
> is 10000.
> + * By default(with no lockup_timeout settings), the timeout for all
> queues is 2000.
> */
> MODULE_PARM_DESC(lockup_timeout,
> - "GPU lockup timeout in ms (default: 10000 for all jobs. "
> - "0: keep default value. negative: infinity timeout),
> format: for bare metal [Non-Compute] or [GFX,Compute,SDMA,Video]; "
> - "for passthrough or sriov [all jobs] or
> [GFX,Compute,SDMA,Video].");
> -module_param_string(lockup_timeout, amdgpu_lockup_timeout,
> sizeof(amdgpu_lockup_timeout), 0444);
> + "GPU lockup timeout in ms (default: 2000 for all queues. "
> + "0: keep default value. negative: infinity timeout),
> format: [single value for all] or [GFX,Compute,SDMA,Video].");
> +module_param_string(lockup_timeout, amdgpu_lockup_timeout,
> + sizeof(amdgpu_lockup_timeout), 0444);
>
> /**
> * DOC: dpm (int)
> --
> 2.43.0
>
> Hi
This patch is causing issues with running:
~/GravityMark_1.89_linux $ DRI_PRIME=1 ./run_fullscreen_vk_rt.sh
M: 0 us: ../data.zip: 313 files
M: 15.19 ms: Temporal antialiasing
M: 15.21 ms: Fullscreen mode
M: 15.22 ms: Render Statistics
M: 20.77 ms: Build Date: Jun 20 2025
M: 20.80 ms: Build Info: version=20250429; linux; x64; release; vk=1;
gl=45; gles=32; cu=1; fusion
M: 20.81 ms: Build Version: 1.89
M: 48.06 ms: Name: ASUSTeK COMPUTER INC. G513QY ROG Strix G513QY_G513QY
M: 48.09 ms: System: 'Gentoo Linux'
M: 48.10 ms: Kernel: Linux 6.19.0-rc7-drm+ x86_64
M: 48.11 ms: Memory: 62.19 GB
M: 48.13 ms: Uptime: 19.00 s
M: 48.15 ms: CPU: AMD Ryzen 9 5900HX with Radeon Graphics
M: 48.17 ms: GPU 0: [AMD/ATI] Navi 22 [Radeon RX 6700/6700 XT/6750 XT /
6800M/6850M XT] (rev c3)
M: 48.18 ms: Device: VEN_1002&DEV_73DF&SUBSYS_16C21043
M: 48.19 ms: Memory: 11.98 GB
M: 48.21 ms: GPU 1: [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega
Mobile Series] (rev c4)
M: 48.22 ms: Device: VEN_1002&DEV_1638&SUBSYS_16C21043
M: 48.23 ms: Memory: 512.00 MB
M: 48.53 ms: Desktop: 2560x1440 1.0
M: 48.55 ms: Screen 0: 2560x1440 0 0 eDP-1
M: 48.57 ms: Set fullscreen mode on 0 screen
M: 51.48 ms: Creating 2560x1440 Vulkan Window
M: 147.88 ms: Render Size: 2560x1440
M: 149.22 ms: Using Fetch Mode
M: 233.88 ms: Device: AMD Radeon RX 6800M (RADV NAVI22)
M: 233.95 ms: Vendor: AMD
M: 233.96 ms: Version: 26.0.99
M: 233.97 ms: DeviceID: 0x73df
M: 234.35 ms: Group Memory: 64.00 KB
M: 234.36 ms: Video Memory: 11.98 GB
M: 234.37 ms: Max Uniform Size: 4.00 GB
M: 234.38 ms: Max Storage Size: 4.00 GB
M: 234.38 ms: Creating SceneManager
M: 416.06 ms: Creating RenderManager
M: 547.17 ms: Ray Tracing Mode
M: 547.20 ms: Creating Scene
M: 1.481 s: Creating 200,000 Asteroids
M: 1.600 s: Updating Scene
M: 1.751 s: GravityMark 1.89 Vulkan RT is Ready in 1.7 s
M: 1.751 s: Starting 2560x1440 Vulkan RT Benchmark
M: 1.751 s: Count: 1
M: 1.752 s: Resizing 2560x1440 frame
M: 1.753 s: Build buffer 44.74 MB
radv/amdgpu: The CS has been cancelled because the context is lost. This
context is guilty of a hard recovery.
E: 4.151 s: VK::error(): device lost
E: 4.152 s: VKContext::Frame::submit(): can't submit command buffer
E: 4.152 s: VKContext::submit(): can't submit frame
E: 4.152 s: VKWindow::present(): can't submit context
E: 4.152 s: GravityMark::render(): can't present window
E: 9.347 s: VK::error(): device lost
E: 9.347 s: VKContext::Frame::wait(): can't wait for fence
E: 9.347 s: VKContext::finish(): can't wait frame
E: 9.347 s: VK::error(): device lost
E: 9.347 s: VKContext::Frame::wait(): can't wait for fence
E: 9.347 s: VKContext::finish(): can't wait frame
E: 9.347 s: VK::error(): device lost
E: 9.347 s: VKContext::Frame::wait(): can't wait for fence
E: 9.347 s: VKContext::finish(): can't wait frame
E: 9.347 s: VKWindow::finish(): can't finish context
M: 9.347 s: Clearing Scene
E: 9.575 s: VK::error(): device lost
E: 9.575 s: VKContext::Frame::wait(): can't wait for fence
E: 9.575 s: VKContext::finish(): can't wait frame
M: 9.575 s: Restore fullscreen mode on 0 screen
E: 9.583 s: VK::error(): device lost
E: 9.583 s: VKContext::Frame::wait(): can't wait for fence
E: 9.583 s: VKContext::finish(): can't wait frame
E: 9.583 s: VK::error(): device lost
E: 9.583 s: VKContext::Frame::wait(): can't wait for fence
E: 9.583 s: VKContext::finish(): can't wait frame
It's only the full screen and RT that seem to have issues
Dmesg:
Feb 15 21:16:13 axion.fireburn.co.uk kernel: [drm] PCIE GART of 512M
enabled (table at 0x00000082FEB00000).
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
PSP is resuming...
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
reserve 0xa00000 from 0x82fd000000 for PSP TMR
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
RAS: optional ras ta ucode is not available
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
SECUREDISPLAY: optional securedisplay ta ucode is not available
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
SMU is resuming...
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
smu driver if version = 0x0000000e, smu fw if version = 0x00000012, smu fw
program = 0, version = 0x00413f00 (65.63.0)
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
SMU driver if version not matched
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
Setting new power limit is not supported!
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
SMU is resumed successfully!
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
kiq ring mec 2 pipe 1 q 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
[drm] DMUB hardware initialized: version=0x02020021
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: [drm]
Cannot find any crtc or sizes
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring gfx_0.0.0 uses VM inv eng 0 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring gfx_0.1.0 uses VM inv eng 1 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.0.0 uses VM inv eng 4 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.1.0 uses VM inv eng 5 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.2.0 uses VM inv eng 6 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.3.0 uses VM inv eng 7 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.0.1 uses VM inv eng 8 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.1.1 uses VM inv eng 9 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.2.1 uses VM inv eng 10 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring comp_1.3.1 uses VM inv eng 11 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring kiq_0.2.1.0 uses VM inv eng 12 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring sdma0 uses VM inv eng 13 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring sdma1 uses VM inv eng 14 on hub 0
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring vcn_dec_0 uses VM inv eng 0 on hub 8
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring jpeg_dec uses VM inv eng 5 on hub 8
Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: [drm]
Cannot find any crtc or sizes
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
Dumping IP State
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
Dumping IP State Completed
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
[drm] AMDGPU device coredump file has been created
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
[drm] Check your /sys/class/drm/card0/device/devcoredump/data
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
ring gfx_0.0.0 timeout, signaled seq=99, emitted seq=100
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
Process GravityMark.x64 pid 1794 thread GravityMark.x64 pid 1794
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
Starting gfx_0.0.0 ring reset
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
Ring gfx_0.0.0 reset succeeded
Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: [drm]
device wedged, but recovered through reset
I got things working with this patch:
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index c7f44422939f..5a3f02a26192 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -4206,7 +4206,7 @@ static int
amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
/* By default timeout for all queues is 2 sec */
adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
- adev->video_timeout = msecs_to_jiffies(2000);
+ adev->video_timeout = msecs_to_jiffies(5000);
if (!strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
return 0;
[-- Attachment #2: Type: text/html, Size: 32604 bytes --]
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] drm/amdgpu: reduce queue timeout to 2 seconds
2026-02-15 21:41 ` Mike Lothian
@ 2026-02-15 21:49 ` Mike Lothian
0 siblings, 0 replies; 5+ messages in thread
From: Mike Lothian @ 2026-02-15 21:49 UTC (permalink / raw)
To: Christian König; +Cc: alexander.deucher, amd-gfx
[-- Attachment #1: Type: text/plain, Size: 17345 bytes --]
On Sun, 15 Feb 2026 at 21:41, Mike Lothian <mike@fireburn.co.uk> wrote:
>
>
> On Thu, 25 Sept 2025 at 14:03, Christian König <
> ckoenig.leichtzumerken@gmail.com> wrote:
>
>> There has been multiple complains that 10 seconds are usually to long.
>>
>> The original requirement for longer timeout came from compute tests on
>> AMDVLK, since that is no longer a topic reduce the timeout back to 2
>> seconds for all queues.
>>
>> While at it also remove any special handling for compute queues under
>> SRIOV or pass through.
>>
>> Signed-off-by: Christian König <christian.koenig@amd.com>
>> ---
>> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 85 ++++++++++------------
>> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 21 ++----
>> 2 files changed, 48 insertions(+), 58 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> index a77000c2e0bb..ceb3c616292c 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> @@ -4278,58 +4278,53 @@ static int
>> amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
>> long timeout;
>> int ret = 0;
>>
>> - /*
>> - * By default timeout for jobs is 10 sec
>> - */
>> - adev->compute_timeout = adev->gfx_timeout =
>> msecs_to_jiffies(10000);
>> - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
>> + /* By default timeout for all queues is 2 sec */
>> + adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
>> + adev->video_timeout = msecs_to_jiffies(2000);
>>
>> - if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
>> - while ((timeout_setting = strsep(&input, ",")) &&
>> - strnlen(timeout_setting,
>> AMDGPU_MAX_TIMEOUT_PARAM_LENGTH)) {
>> - ret = kstrtol(timeout_setting, 0, &timeout);
>> - if (ret)
>> - return ret;
>> + if (!strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
>> + return 0;
>>
>> - if (timeout == 0) {
>> - index++;
>> - continue;
>> - } else if (timeout < 0) {
>> - timeout = MAX_SCHEDULE_TIMEOUT;
>> - dev_warn(adev->dev, "lockup timeout
>> disabled");
>> - add_taint(TAINT_SOFTLOCKUP,
>> LOCKDEP_STILL_OK);
>> - } else {
>> - timeout = msecs_to_jiffies(timeout);
>> - }
>> + while ((timeout_setting = strsep(&input, ",")) &&
>> + strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
>> {
>> + ret = kstrtol(timeout_setting, 0, &timeout);
>> + if (ret)
>> + return ret;
>>
>> - switch (index++) {
>> - case 0:
>> - adev->gfx_timeout = timeout;
>> - break;
>> - case 1:
>> - adev->compute_timeout = timeout;
>> - break;
>> - case 2:
>> - adev->sdma_timeout = timeout;
>> - break;
>> - case 3:
>> - adev->video_timeout = timeout;
>> - break;
>> - default:
>> - break;
>> - }
>> + if (timeout == 0) {
>> + index++;
>> + continue;
>> + } else if (timeout < 0) {
>> + timeout = MAX_SCHEDULE_TIMEOUT;
>> + dev_warn(adev->dev, "lockup timeout disabled");
>> + add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
>> + } else {
>> + timeout = msecs_to_jiffies(timeout);
>> }
>> - /*
>> - * There is only one value specified and
>> - * it should apply to all non-compute jobs.
>> - */
>> - if (index == 1) {
>> - adev->sdma_timeout = adev->video_timeout =
>> adev->gfx_timeout;
>> - if (amdgpu_sriov_vf(adev) ||
>> amdgpu_passthrough(adev))
>> - adev->compute_timeout = adev->gfx_timeout;
>> +
>> + switch (index++) {
>> + case 0:
>> + adev->gfx_timeout = timeout;
>> + break;
>> + case 1:
>> + adev->compute_timeout = timeout;
>> + break;
>> + case 2:
>> + adev->sdma_timeout = timeout;
>> + break;
>> + case 3:
>> + adev->video_timeout = timeout;
>> + break;
>> + default:
>> + break;
>> }
>> }
>>
>> + /* When only one value specified apply it to all queues. */
>> + if (index == 1)
>> + adev->gfx_timeout = adev->compute_timeout =
>> adev->sdma_timeout =
>> + adev->video_timeout = timeout;
>> +
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> index ece251cbe8c3..fe45dd1d979e 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> @@ -353,22 +353,17 @@ module_param_named(svm_default_granularity,
>> amdgpu_svm_default_granularity, uint
>> * DOC: lockup_timeout (string)
>> * Set GPU scheduler timeout value in ms.
>> *
>> - * The format can be [Non-Compute] or [GFX,Compute,SDMA,Video]. That is
>> there can be one or
>> - * multiple values specified. 0 and negative values are invalidated.
>> They will be adjusted
>> - * to the default timeout.
>> + * The format can be [single value] for setting all timeouts at once or
>> + * [GFX,Compute,SDMA,Video] to set individual timeouts.
>> + * Negative values mean infinity.
>> *
>> - * - With one value specified, the setting will apply to all non-compute
>> jobs.
>> - * - With multiple values specified, the first one will be for GFX.
>> - * The second one is for Compute. The third and fourth ones are
>> - * for SDMA and Video.
>> - *
>> - * By default(with no lockup_timeout settings), the timeout for all jobs
>> is 10000.
>> + * By default(with no lockup_timeout settings), the timeout for all
>> queues is 2000.
>> */
>> MODULE_PARM_DESC(lockup_timeout,
>> - "GPU lockup timeout in ms (default: 10000 for all jobs. "
>> - "0: keep default value. negative: infinity timeout),
>> format: for bare metal [Non-Compute] or [GFX,Compute,SDMA,Video]; "
>> - "for passthrough or sriov [all jobs] or
>> [GFX,Compute,SDMA,Video].");
>> -module_param_string(lockup_timeout, amdgpu_lockup_timeout,
>> sizeof(amdgpu_lockup_timeout), 0444);
>> + "GPU lockup timeout in ms (default: 2000 for all queues.
>> "
>> + "0: keep default value. negative: infinity timeout),
>> format: [single value for all] or [GFX,Compute,SDMA,Video].");
>> +module_param_string(lockup_timeout, amdgpu_lockup_timeout,
>> + sizeof(amdgpu_lockup_timeout), 0444);
>>
>> /**
>> * DOC: dpm (int)
>> --
>> 2.43.0
>>
>> Hi
>
> This patch is causing issues with running:
>
> ~/GravityMark_1.89_linux $ DRI_PRIME=1 ./run_fullscreen_vk_rt.sh
>
> M: 0 us: ../data.zip: 313 files
> M: 15.19 ms: Temporal antialiasing
> M: 15.21 ms: Fullscreen mode
> M: 15.22 ms: Render Statistics
> M: 20.77 ms: Build Date: Jun 20 2025
> M: 20.80 ms: Build Info: version=20250429; linux; x64; release; vk=1;
> gl=45; gles=32; cu=1; fusion
> M: 20.81 ms: Build Version: 1.89
> M: 48.06 ms: Name: ASUSTeK COMPUTER INC. G513QY ROG Strix G513QY_G513QY
> M: 48.09 ms: System: 'Gentoo Linux'
> M: 48.10 ms: Kernel: Linux 6.19.0-rc7-drm+ x86_64
> M: 48.11 ms: Memory: 62.19 GB
> M: 48.13 ms: Uptime: 19.00 s
> M: 48.15 ms: CPU: AMD Ryzen 9 5900HX with Radeon Graphics
> M: 48.17 ms: GPU 0: [AMD/ATI] Navi 22 [Radeon RX 6700/6700 XT/6750 XT /
> 6800M/6850M XT] (rev c3)
> M: 48.18 ms: Device: VEN_1002&DEV_73DF&SUBSYS_16C21043
> M: 48.19 ms: Memory: 11.98 GB
> M: 48.21 ms: GPU 1: [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega
> Mobile Series] (rev c4)
> M: 48.22 ms: Device: VEN_1002&DEV_1638&SUBSYS_16C21043
> M: 48.23 ms: Memory: 512.00 MB
> M: 48.53 ms: Desktop: 2560x1440 1.0
> M: 48.55 ms: Screen 0: 2560x1440 0 0 eDP-1
> M: 48.57 ms: Set fullscreen mode on 0 screen
> M: 51.48 ms: Creating 2560x1440 Vulkan Window
> M: 147.88 ms: Render Size: 2560x1440
> M: 149.22 ms: Using Fetch Mode
> M: 233.88 ms: Device: AMD Radeon RX 6800M (RADV NAVI22)
> M: 233.95 ms: Vendor: AMD
> M: 233.96 ms: Version: 26.0.99
> M: 233.97 ms: DeviceID: 0x73df
> M: 234.35 ms: Group Memory: 64.00 KB
> M: 234.36 ms: Video Memory: 11.98 GB
> M: 234.37 ms: Max Uniform Size: 4.00 GB
> M: 234.38 ms: Max Storage Size: 4.00 GB
> M: 234.38 ms: Creating SceneManager
> M: 416.06 ms: Creating RenderManager
> M: 547.17 ms: Ray Tracing Mode
> M: 547.20 ms: Creating Scene
> M: 1.481 s: Creating 200,000 Asteroids
> M: 1.600 s: Updating Scene
> M: 1.751 s: GravityMark 1.89 Vulkan RT is Ready in 1.7 s
> M: 1.751 s: Starting 2560x1440 Vulkan RT Benchmark
> M: 1.751 s: Count: 1
> M: 1.752 s: Resizing 2560x1440 frame
> M: 1.753 s: Build buffer 44.74 MB
> radv/amdgpu: The CS has been cancelled because the context is lost. This
> context is guilty of a hard recovery.
> E: 4.151 s: VK::error(): device lost
> E: 4.152 s: VKContext::Frame::submit(): can't submit command buffer
> E: 4.152 s: VKContext::submit(): can't submit frame
> E: 4.152 s: VKWindow::present(): can't submit context
> E: 4.152 s: GravityMark::render(): can't present window
> E: 9.347 s: VK::error(): device lost
> E: 9.347 s: VKContext::Frame::wait(): can't wait for fence
> E: 9.347 s: VKContext::finish(): can't wait frame
> E: 9.347 s: VK::error(): device lost
> E: 9.347 s: VKContext::Frame::wait(): can't wait for fence
> E: 9.347 s: VKContext::finish(): can't wait frame
> E: 9.347 s: VK::error(): device lost
> E: 9.347 s: VKContext::Frame::wait(): can't wait for fence
> E: 9.347 s: VKContext::finish(): can't wait frame
> E: 9.347 s: VKWindow::finish(): can't finish context
> M: 9.347 s: Clearing Scene
> E: 9.575 s: VK::error(): device lost
> E: 9.575 s: VKContext::Frame::wait(): can't wait for fence
> E: 9.575 s: VKContext::finish(): can't wait frame
> M: 9.575 s: Restore fullscreen mode on 0 screen
> E: 9.583 s: VK::error(): device lost
> E: 9.583 s: VKContext::Frame::wait(): can't wait for fence
> E: 9.583 s: VKContext::finish(): can't wait frame
> E: 9.583 s: VK::error(): device lost
> E: 9.583 s: VKContext::Frame::wait(): can't wait for fence
> E: 9.583 s: VKContext::finish(): can't wait frame
>
>
> It's only the full screen and RT that seem to have issues
>
> Dmesg:
>
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: [drm] PCIE GART of 512M
> enabled (table at 0x00000082FEB00000).
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> PSP is resuming...
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> reserve 0xa00000 from 0x82fd000000 for PSP TMR
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> RAS: optional ras ta ucode is not available
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> SECUREDISPLAY: optional securedisplay ta ucode is not available
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> SMU is resuming...
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> smu driver if version = 0x0000000e, smu fw if version = 0x00000012, smu fw
> program = 0, version = 0x00413f00 (65.63.0)
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> SMU driver if version not matched
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> Setting new power limit is not supported!
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> SMU is resumed successfully!
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> kiq ring mec 2 pipe 1 q 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> [drm] DMUB hardware initialized: version=0x02020021
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: [drm]
> Cannot find any crtc or sizes
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring gfx_0.0.0 uses VM inv eng 0 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring gfx_0.1.0 uses VM inv eng 1 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.0.0 uses VM inv eng 4 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.1.0 uses VM inv eng 5 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.2.0 uses VM inv eng 6 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.3.0 uses VM inv eng 7 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.0.1 uses VM inv eng 8 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.1.1 uses VM inv eng 9 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.2.1 uses VM inv eng 10 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring comp_1.3.1 uses VM inv eng 11 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring kiq_0.2.1.0 uses VM inv eng 12 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring sdma0 uses VM inv eng 13 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring sdma1 uses VM inv eng 14 on hub 0
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring vcn_dec_0 uses VM inv eng 0 on hub 8
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring jpeg_dec uses VM inv eng 5 on hub 8
> Feb 15 21:16:13 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: [drm]
> Cannot find any crtc or sizes
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> Dumping IP State
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> Dumping IP State Completed
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> [drm] AMDGPU device coredump file has been created
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> [drm] Check your /sys/class/drm/card0/device/devcoredump/data
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> ring gfx_0.0.0 timeout, signaled seq=99, emitted seq=100
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> Process GravityMark.x64 pid 1794 thread GravityMark.x64 pid 1794
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> Starting gfx_0.0.0 ring reset
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: amdgpu:
> Ring gfx_0.0.0 reset succeeded
> Feb 15 21:16:17 axion.fireburn.co.uk kernel: amdgpu 0000:03:00.0: [drm]
> device wedged, but recovered through reset
>
> I got things working with this patch:
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> index c7f44422939f..5a3f02a26192 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -4206,7 +4206,7 @@ static int
> amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev)
>
> /* By default timeout for all queues is 2 sec */
> adev->gfx_timeout = adev->compute_timeout = adev->sdma_timeout =
> - adev->video_timeout = msecs_to_jiffies(2000);
> + adev->video_timeout = msecs_to_jiffies(5000);
>
> if (!strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENGTH))
> return 0;
>
>
Also 3000 works too
[-- Attachment #2: Type: text/html, Size: 32964 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread