[PATCH 00/31] DC Patches June 17, 2022

[PATCH 00/31] DC Patches June 17, 2022

[Rodrigo Siqueira]

This DC patchset brings improvements in multiple areas. In summary, we
have:

- Remove unnecessary code;
- Small fixes (compilation warnings, typos, etc);
- Improvements in the DPMS code;
- Fix eDP issues;
- Improvements in the MST code.

Thanks
Siqueira

Alvin Lee (2):
  drm/amd/display: Update DPPCLK programming sequence
  drm/amd/display: Update SW state correctly for FCLK

Aric Cyr (2):
  drm/amd/display: Change initializer to single brace
  drm/amd/display: 3.2.191

Chaitanya Dhere (1):
  drm/amd/display: Implement a pme workaround function

Cruise Hung (1):
  drm/amd/display: Remove compiler warning

Dmytro Laktyushkin (1):
  drm/amd/display: Fix in dp link-training when updating payload
    allocation table

George Shen (5):
  drm/amd/display: Fix in overriding DP drive settings
  drm/amd/display: Fix typo in override_lane_settings
  drm/amd/display: Handle downstream LTTPR with fixed VS sequence
  drm/amd/display: Remove unused vendor specific w/a
  drm/amd/display: Fix divide-by-zero in DPPCLK and DISPCLK calculation

Ian Chen (1):
  drm/amd/display: Drop unnecessary detect link code

JinZe.Xu (1):
  drm/amd/display: Change HDMI judgement condition.

Nicholas Choi (1):
  drm/amd/display: refactor function transmitter_to_phy_id

Qingqing Zhuo (1):
  drm/amd/display: Fix DC warning at driver load

Rodrigo Siqueira (4):
  drm/amd/display: Check minimum disp_clk and dpp_clk debug option
  drm/amd/display: Get VCO frequency from registers
  drm/amd/display: Update hook dcn32_funcs
  drm/amd/display: Drop duplicate define

Saaem Rizvi (1):
  drm/amd/display: Add SMU logging code

Sung Joon Kim (2):
  drm/amd/display: Fix eDP not light up on resume
  drm/amd/display: Turn off internal backlight when plugging external
    monitor

Wayne Lin (4):
  drm/amd/display: Revert "drm/amd/display: Add flag to detect dpms
    force off during HPD"
  drm/amd/display: Revert "drm/amd/display: turn DPMS off on connector
    unplug"
  drm/amd/display: Release remote dc_sink under mst scenario
  drm/amd/display: Take emulated dc_sink into account for HDCP

Wenjing Liu (3):
  drm/amd/display: Enrich the log in MST payload update
  drm/amd/display: rename lane_settings to hw_lane_settings
  drm/amd/display: extract update stream allocation to link_hwss

hersen wu (1):
  drm/amd/display: add mst port output bw check

 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  57 +----
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |   5 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c |   8 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_hdcp.c    |   1 +
 .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c |  18 +-
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   |  70 +++++-
 .../display/amdgpu_dm/amdgpu_dm_mst_types.h   |   4 +
 .../dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c   |  12 +
 .../display/dc/clk_mgr/dcn301/dcn301_smu.c    |  12 +
 .../amd/display/dc/clk_mgr/dcn31/dcn31_smu.c  |   8 +
 .../dc/clk_mgr/dcn315/dcn315_clk_mgr.c        |   2 +-
 .../display/dc/clk_mgr/dcn315/dcn315_smu.c    |   8 +
 .../display/dc/clk_mgr/dcn316/dcn316_smu.c    |   8 +
 .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c  | 151 +++++++++++-
 .../dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c  |  10 +-
 .../dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h  |   1 +
 drivers/gpu/drm/amd/display/dc/core/dc.c      |  13 -
 drivers/gpu/drm/amd/display/dc/core/dc_link.c |  43 ++--
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c  | 222 ++++++------------
 .../drm/amd/display/dc/core/dc_link_dpia.c    |  38 +--
 drivers/gpu/drm/amd/display/dc/dc.h           |   6 +-
 drivers/gpu/drm/amd/display/dc/dc_stream.h    |   1 -
 .../drm/amd/display/dc/dcn31/dcn31_resource.c |   1 -
 .../gpu/drm/amd/display/dc/inc/hw/clk_mgr.h   |   3 +
 .../gpu/drm/amd/display/dc/inc/link_hwss.h    |   6 +-
 .../gpu/drm/amd/display/include/fixed31_32.h  |   2 +-
 .../amd/display/include/link_service_types.h  |   1 -
 27 files changed, 421 insertions(+), 290 deletions(-)

-- 
2.25.1

[PATCH 01/31] drm/amd/display: Remove compiler warning

[Rodrigo Siqueira]

From: Cruise Hung <Cruise.Hung@amd.com>

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
---
 drivers/gpu/drm/amd/display/include/fixed31_32.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/include/fixed31_32.h b/drivers/gpu/drm/amd/display/include/fixed31_32.h
index 22053d7ea6ce..ece97ae0e826 100644
--- a/drivers/gpu/drm/amd/display/include/fixed31_32.h
+++ b/drivers/gpu/drm/amd/display/include/fixed31_32.h
@@ -322,7 +322,7 @@ struct fixed31_32 dc_fixpt_sqr(struct fixed31_32 arg);
  */
 static inline struct fixed31_32 dc_fixpt_div_int(struct fixed31_32 arg1, long long arg2)
 {
-	return dc_fixpt_from_fraction(arg1.value, dc_fixpt_from_int(arg2).value);
+	return dc_fixpt_from_fraction(arg1.value, dc_fixpt_from_int((int)arg2).value);
 }
 
 /*
-- 
2.25.1

[PATCH 02/31] drm/amd/display: Revert "drm/amd/display: Add flag to detect dpms force off during HPD"

[Rodrigo Siqueira]

From: Wayne Lin <Wayne.Lin@amd.com>

This reverts commit 3c4d55c9b9becedd8d31a7c96783a364533713ab.

The reverted commit was trying to fix side effect brought by commit:
"3c4d55c9b9be drm/amd/display: turn DPMS off on connector unplug"

However,
* This reverted commit will have mst case never call dm_set_dpms_off()
  which conflicts the idea of original commit: commit 3c4d55c9b9be
  ("drm/amd/display: turn DPMS off on connector unplug") That's due to
  dm_crtc_state is always null since the input parameter aconnector is the
  root device (source) of mst topology.  It's not an end stream sink
  within the mst topology.
* Setting dpms off should be triggered by usermode. Besdies, it seems
  usermode does release relevant resource for mst & non-mst case when
  unplug connecotr now. Which means we no longer need both commits now:
  - commit 3c4d55c9b9be ("drm/amd/display: turn DPMS off on connector
    unplug")
  - commit 035f54969bb2 ("drm/amd/display: Add flag to detect dpms
    force off during HPD")

Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 19 ++++++-------------
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |  2 --
 .../amd/display/amdgpu_dm/amdgpu_dm_hdcp.c    | 16 +++++-----------
 3 files changed, 11 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index c2bc7db85d7e..beba783dd6ef 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2582,7 +2582,7 @@ static void dm_gpureset_commit_state(struct dc_state *dc_state,
 	return;
 }
 
-static void dm_set_dpms_off(struct dc_link *link, struct dm_crtc_state *acrtc_state)
+static void dm_set_dpms_off(struct dc_link *link)
 {
 	struct dc_stream_state *stream_state;
 	struct amdgpu_dm_connector *aconnector = link->priv;
@@ -2603,7 +2603,6 @@ static void dm_set_dpms_off(struct dc_link *link, struct dm_crtc_state *acrtc_st
 	}
 
 	stream_update.stream = stream_state;
-	acrtc_state->force_dpms_off = true;
 	dc_commit_updates_for_stream(stream_state->ctx->dc, NULL, 0,
 				     stream_state, &stream_update,
 				     stream_state->ctx->dc->current_state);
@@ -3060,16 +3059,13 @@ static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector)
 	struct drm_device *dev = connector->dev;
 	enum dc_connection_type new_connection_type = dc_connection_none;
 	struct amdgpu_device *adev = drm_to_adev(dev);
+#ifdef CONFIG_DRM_AMD_DC_HDCP
 	struct dm_connector_state *dm_con_state = to_dm_connector_state(connector->state);
-	struct dm_crtc_state *dm_crtc_state = NULL;
+#endif
 
 	if (adev->dm.disable_hpd_irq)
 		return;
 
-	if (dm_con_state->base.state && dm_con_state->base.crtc)
-		dm_crtc_state = to_dm_crtc_state(drm_atomic_get_crtc_state(
-					dm_con_state->base.state,
-					dm_con_state->base.crtc));
 	/*
 	 * In case of failure or MST no need to update connector status or notify the OS
 	 * since (for MST case) MST does this in its own context.
@@ -3100,9 +3096,8 @@ static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector)
 
 	} else if (dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD)) {
 		if (new_connection_type == dc_connection_none &&
-		    aconnector->dc_link->type == dc_connection_none &&
-		    dm_crtc_state)
-			dm_set_dpms_off(aconnector->dc_link, dm_crtc_state);
+		    aconnector->dc_link->type == dc_connection_none)
+			dm_set_dpms_off(aconnector->dc_link);
 
 		amdgpu_dm_update_connector_after_detect(aconnector);
 
@@ -6839,7 +6834,6 @@ dm_crtc_duplicate_state(struct drm_crtc *crtc)
 	state->freesync_config = cur->freesync_config;
 	state->cm_has_degamma = cur->cm_has_degamma;
 	state->cm_is_degamma_srgb = cur->cm_is_degamma_srgb;
-	state->force_dpms_off = cur->force_dpms_off;
 	state->mpo_requested = cur->mpo_requested;
 	/* TODO Duplicate dc_stream after objects are stream object is flattened */
 
@@ -9572,8 +9566,7 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 		 * and rely on sending it from software.
 		 */
 		if (acrtc_attach->base.state->event &&
-		    acrtc_state->active_planes > 0 &&
-		    !acrtc_state->force_dpms_off) {
+		    acrtc_state->active_planes > 0) {
 			drm_crtc_vblank_get(pcrtc);
 
 			spin_lock_irqsave(&pcrtc->dev->event_lock, flags);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index 3cc5c15303e6..cbd2e8f2ae50 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -639,8 +639,6 @@ struct dm_crtc_state {
 
 	bool dsc_force_changed;
 	bool vrr_supported;
-
-	bool force_dpms_off;
 	struct mod_freesync_config freesync_config;
 	struct dc_info_packet vrr_infopacket;
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
index c76b628e6791..236a5ebab5ab 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -448,8 +448,6 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	struct mod_hdcp_display *display = &hdcp_work[link_index].display;
 	struct mod_hdcp_link *link = &hdcp_work[link_index].link;
 	struct drm_connector_state *conn_state;
-	struct dc_sink *sink = NULL;
-	bool link_is_hdcp14 = false;
 
 	if (config->dpms_off) {
 		hdcp_remove_display(hdcp_work, link_index, aconnector);
@@ -462,13 +460,8 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	display->index = aconnector->base.index;
 	display->state = MOD_HDCP_DISPLAY_ACTIVE;
 
-	if (aconnector->dc_sink)
-		sink = aconnector->dc_sink;
-	else if (aconnector->dc_em_sink)
-		sink = aconnector->dc_em_sink;
-
-	if (sink != NULL)
-		link->mode = mod_hdcp_signal_type_to_operation_mode(sink->sink_signal);
+	if (aconnector->dc_sink != NULL)
+		link->mode = mod_hdcp_signal_type_to_operation_mode(aconnector->dc_sink->sink_signal);
 
 	display->controller = CONTROLLER_ID_D0 + config->otg_inst;
 	display->dig_fe = config->dig_fe;
@@ -478,8 +471,9 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	link->link_enc_idx = config->link_enc_idx;
 	link->dio_output_id = config->dio_output_idx;
 	link->phy_idx = config->phy_idx;
-	if (sink)
-		link_is_hdcp14 = dc_link_is_hdcp14(aconnector->dc_link, sink->sink_signal);
+
+	link->hdcp_supported_informational = dc_link_is_hdcp14(aconnector->dc_link,
+			aconnector->dc_sink->sink_signal) ? 1 : 0;
 	link->hdcp_supported_informational = link_is_hdcp14;
 	link->dp.rev = aconnector->dc_link->dpcd_caps.dpcd_rev.raw;
 	link->dp.assr_enabled = config->assr_enabled;
-- 
2.25.1

[PATCH 03/31] drm/amd/display: Revert "drm/amd/display: turn DPMS off on connector unplug"

[Rodrigo Siqueira]

From: Wayne Lin <Wayne.Lin@amd.com>

This reverts commit 3c4d55c9b9becedd8d31a7c96783a364533713ab.

Revert the commit because:
- It's incomplete of the function dm_set_dpms_off() for mst case.  For
  stream sinks whithin the same mst topology, they share the same dc_link.
  dm_set_dpms_off() tries to update one mst stream only which is
  incomplete.
- Setting dpms off should be triggered by usermode. Besdies, it seems
  usermode does release relevant resource for mst & non-mst case when
  unplug connecotr now.

Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 31 -------------------
 drivers/gpu/drm/amd/display/dc/core/dc.c      | 13 --------
 drivers/gpu/drm/amd/display/dc/dc_stream.h    |  1 -
 3 files changed, 45 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index beba783dd6ef..0c90667f682a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2582,33 +2582,6 @@ static void dm_gpureset_commit_state(struct dc_state *dc_state,
 	return;
 }
 
-static void dm_set_dpms_off(struct dc_link *link)
-{
-	struct dc_stream_state *stream_state;
-	struct amdgpu_dm_connector *aconnector = link->priv;
-	struct amdgpu_device *adev = drm_to_adev(aconnector->base.dev);
-	struct dc_stream_update stream_update;
-	bool dpms_off = true;
-
-	memset(&stream_update, 0, sizeof(stream_update));
-	stream_update.dpms_off = &dpms_off;
-
-	mutex_lock(&adev->dm.dc_lock);
-	stream_state = dc_stream_find_from_link(link);
-
-	if (stream_state == NULL) {
-		DRM_DEBUG_DRIVER("Error finding stream state associated with link!\n");
-		mutex_unlock(&adev->dm.dc_lock);
-		return;
-	}
-
-	stream_update.stream = stream_state;
-	dc_commit_updates_for_stream(stream_state->ctx->dc, NULL, 0,
-				     stream_state, &stream_update,
-				     stream_state->ctx->dc->current_state);
-	mutex_unlock(&adev->dm.dc_lock);
-}
-
 static int dm_resume(void *handle)
 {
 	struct amdgpu_device *adev = handle;
@@ -3095,10 +3068,6 @@ static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector)
 			drm_kms_helper_connector_hotplug_event(connector);
 
 	} else if (dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD)) {
-		if (new_connection_type == dc_connection_none &&
-		    aconnector->dc_link->type == dc_connection_none)
-			dm_set_dpms_off(aconnector->dc_link);
-
 		amdgpu_dm_update_connector_after_detect(aconnector);
 
 		drm_modeset_lock_all(dev);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 48a14a5bda56..146fd4b864b2 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3325,19 +3325,6 @@ struct dc_stream_state *dc_get_stream_at_index(struct dc *dc, uint8_t i)
 	return NULL;
 }
 
-struct dc_stream_state *dc_stream_find_from_link(const struct dc_link *link)
-{
-	uint8_t i;
-	struct dc_context *ctx = link->ctx;
-
-	for (i = 0; i < ctx->dc->current_state->stream_count; i++) {
-		if (ctx->dc->current_state->streams[i]->link == link)
-			return ctx->dc->current_state->streams[i];
-	}
-
-	return NULL;
-}
-
 enum dc_irq_source dc_interrupt_to_irq_source(
 		struct dc *dc,
 		uint32_t src_id,
diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h
index 5a894c19b0ea..6f79327e0035 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_stream.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h
@@ -351,7 +351,6 @@ void dc_stream_log(const struct dc *dc, const struct dc_stream_state *stream);
 
 uint8_t dc_get_current_stream_count(struct dc *dc);
 struct dc_stream_state *dc_get_stream_at_index(struct dc *dc, uint8_t i);
-struct dc_stream_state *dc_stream_find_from_link(const struct dc_link *link);
 
 /*
  * Return the current frame counter.
-- 
2.25.1

[PATCH 04/31] drm/amd/display: Release remote dc_sink under mst scenario

[Rodrigo Siqueira]

From: Wayne Lin <Wayne.Lin@amd.com>

[Why]
Observe that we have several problems while releasing remote dc_sink
under mst cases.

- When unplug mst branch device from the source, we now try to free all
  remote dc_sinks in dm_helpers_dp_mst_stop_top_mgr(). However, there are
  bugs while we're releasing dc_sinks here. First of all,
  link->remote_sinks[] array get shuffled within
  dc_link_remove_remote_sink(). As the result, increasing the array index
  within the releasing loop is wrong. Secondly, it tries to call
  dc_sink_release() to release the dc_sink of the same aconnector every
  time in the loop. Which can't release dc_sink of all aconnector in the
  mst topology.
- There is no code path for us to release remote dc_sink for disconnected
  sst monitor which unplug event is notified by CSN sideband message. Which
  means we'll use stale dc_sink data to represent later on connected
  monitor. Also, has chance to break the maximum remote dc_sink number
  constraint.

[How]
Distinguish unplug event of mst scenario into 2 cases.

* Unplug sst/legacy stream sink off the mst topology
- Release related remote dc_sink in detec_ctx().

* Unplug mst branch device off the mst topology
- Release related remote dc_sink in early_unregister()

Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  5 +--
 .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 18 +---------
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 34 +++++++++++++++++--
 3 files changed, 35 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 0c90667f682a..c2fc32dac712 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2200,7 +2200,8 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
 		} else {
 			ret = drm_dp_mst_topology_mgr_resume(mgr, true);
 			if (ret < 0) {
-				drm_dp_mst_topology_mgr_set_mst(mgr, false);
+				dm_helpers_dp_mst_stop_top_mgr(aconnector->dc_link->ctx,
+					aconnector->dc_link);
 				need_hotplug = true;
 			}
 		}
@@ -10599,7 +10600,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
 		 * added MST connectors not found in existing crtc_state in the chained mode
 		 * TODO: need to dig out the root cause of that
 		 */
-		if (!aconnector || (!aconnector->dc_sink && aconnector->mst_port))
+		if (!aconnector)
 			goto skip_modeset;
 
 		if (modereset_required(new_crtc_state))
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index 7c799ddc1d27..137645d40b72 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -451,7 +451,6 @@ bool dm_helpers_dp_mst_stop_top_mgr(
 		struct dc_link *link)
 {
 	struct amdgpu_dm_connector *aconnector = link->priv;
-	uint8_t i;
 
 	if (!aconnector) {
 		DRM_ERROR("Failed to find connector for link!");
@@ -463,22 +462,7 @@ bool dm_helpers_dp_mst_stop_top_mgr(
 
 	if (aconnector->mst_mgr.mst_state == true) {
 		drm_dp_mst_topology_mgr_set_mst(&aconnector->mst_mgr, false);
-
-		for (i = 0; i < MAX_SINKS_PER_LINK; i++) {
-			if (link->remote_sinks[i] == NULL)
-				continue;
-
-			if (link->remote_sinks[i]->sink_signal ==
-			    SIGNAL_TYPE_DISPLAY_PORT_MST) {
-				dc_link_remove_remote_sink(link, link->remote_sinks[i]);
-
-				if (aconnector->dc_sink) {
-					dc_sink_release(aconnector->dc_sink);
-					aconnector->dc_sink = NULL;
-					aconnector->dc_link->cur_link_settings.lane_count = 0;
-				}
-			}
-		}
+		link->cur_link_settings.lane_count = 0;
 	}
 
 	return false;
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index bdfe5a9a08dd..d005bb6a2956 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -140,11 +140,28 @@ amdgpu_dm_mst_connector_late_register(struct drm_connector *connector)
 static void
 amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
 {
-	struct amdgpu_dm_connector *amdgpu_dm_connector =
+	struct amdgpu_dm_connector *aconnector =
 		to_amdgpu_dm_connector(connector);
-	struct drm_dp_mst_port *port = amdgpu_dm_connector->port;
+	struct drm_dp_mst_port *port = aconnector->port;
+	struct amdgpu_dm_connector *root = aconnector->mst_port;
+	struct dc_link *dc_link = aconnector->dc_link;
+	struct dc_sink *dc_sink = aconnector->dc_sink;
 
 	drm_dp_mst_connector_early_unregister(connector, port);
+
+	/*
+	 * Release dc_sink for connector which its attached port is
+	 * no longer in the mst topology
+	 */
+	drm_modeset_lock(&root->mst_mgr.base.lock, NULL);
+	if (dc_sink) {
+		if (dc_link->sink_count)
+			dc_link_remove_remote_sink(dc_link, dc_sink);
+
+		dc_sink_release(dc_sink);
+		aconnector->dc_sink = NULL;
+	}
+	drm_modeset_unlock(&root->mst_mgr.base.lock);
 }
 
 static const struct drm_connector_funcs dm_dp_mst_connector_funcs = {
@@ -351,7 +368,7 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		return connector_status_disconnected;
 
 	connection_status = drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
-				      aconnector->port);
+							aconnector->port);
 
 	if (port->pdt != DP_PEER_DEVICE_NONE && !port->dpcd_rev) {
 		uint8_t dpcd_rev;
@@ -385,6 +402,17 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		port->dpcd_rev = 0;
 	}
 
+	/*
+	 * Release dc_sink for connector which unplug event is notified by CSN msg
+	 */
+	if (connection_status == connector_status_disconnected && aconnector->dc_sink) {
+		if (aconnector->dc_link->sink_count)
+			dc_link_remove_remote_sink(aconnector->dc_link, aconnector->dc_sink);
+
+		dc_sink_release(aconnector->dc_sink);
+		aconnector->dc_sink = NULL;
+	}
+
 	return connection_status;
 }
 
-- 
2.25.1

[PATCH 05/31] drm/amd/display: Take emulated dc_sink into account for HDCP

[Rodrigo Siqueira]

From: Wayne Lin <Wayne.Lin@amd.com>

[Why]
While updating the config of hdcp, we use the sink_singal type of the
dc_sink to decide the HDCP operation mode. However, it doesn't consider
the case when the sink is a emulated one.

[How]
Take dc_em_sink into account while updating HDCP config.

Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
---
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c    | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
index 236a5ebab5ab..71e6d98410fc 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -448,6 +448,8 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	struct mod_hdcp_display *display = &hdcp_work[link_index].display;
 	struct mod_hdcp_link *link = &hdcp_work[link_index].link;
 	struct drm_connector_state *conn_state;
+	struct dc_sink *sink = NULL;
+	bool link_is_hdcp14 = false;
 
 	if (config->dpms_off) {
 		hdcp_remove_display(hdcp_work, link_index, aconnector);
@@ -460,8 +462,13 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	display->index = aconnector->base.index;
 	display->state = MOD_HDCP_DISPLAY_ACTIVE;
 
-	if (aconnector->dc_sink != NULL)
-		link->mode = mod_hdcp_signal_type_to_operation_mode(aconnector->dc_sink->sink_signal);
+	if (aconnector->dc_sink)
+		sink = aconnector->dc_sink;
+	else if (aconnector->dc_em_sink)
+		sink = aconnector->dc_em_sink;
+
+	if (sink != NULL)
+		link->mode = mod_hdcp_signal_type_to_operation_mode(sink->sink_signal);
 
 	display->controller = CONTROLLER_ID_D0 + config->otg_inst;
 	display->dig_fe = config->dig_fe;
@@ -472,8 +479,8 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	link->dio_output_id = config->dio_output_idx;
 	link->phy_idx = config->phy_idx;
 
-	link->hdcp_supported_informational = dc_link_is_hdcp14(aconnector->dc_link,
-			aconnector->dc_sink->sink_signal) ? 1 : 0;
+	if (sink)
+		link_is_hdcp14 = dc_link_is_hdcp14(aconnector->dc_link, sink->sink_signal);
 	link->hdcp_supported_informational = link_is_hdcp14;
 	link->dp.rev = aconnector->dc_link->dpcd_caps.dpcd_rev.raw;
 	link->dp.assr_enabled = config->assr_enabled;
-- 
2.25.1

[PATCH 06/31] drm/amd/display: Drop unnecessary detect link code

[Rodrigo Siqueira]

From: Ian Chen <ian.chen@amd.com>

Delete unnecessary codes in detect_link_and_local_sink. We already have
correct stop logic in dc_link_detect.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 199868925fe4..fac27b45230f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1142,11 +1142,6 @@ static bool detect_link_and_local_sink(struct dc_link *link,
 					(link->dpcd_caps.dongle_type !=
 							DISPLAY_DONGLE_DP_HDMI_CONVERTER))
 				converter_disable_audio = true;
-
-			// link switch from MST to non-MST stop topology manager
-			if (pre_connection_type == dc_connection_mst_branch &&
-					link->type != dc_connection_mst_branch)
-				dm_helpers_dp_mst_stop_top_mgr(link->ctx, link);
 			break;
 		}
 
-- 
2.25.1

[PATCH 07/31] drm/amd/display: add mst port output bw check

[Rodrigo Siqueira]

From: hersen wu <hersenxs.wu@amd.com>

[Why]
when connect one 4k@144hz dp to dsc mst hub, 4k@144hz mode is in valid
mode list. but some mst hub port output bandwidth does not support
4k@144hz.

[How]
add mst port output bandwidth checks, include full_pbn, branch max
throughput mps.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  8 +++--
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |  3 +-
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 36 +++++++++++++++++++
 .../display/amdgpu_dm/amdgpu_dm_mst_types.h   |  4 +++
 4 files changed, 48 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index c2fc32dac712..ea91149ec3e6 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7259,7 +7259,11 @@ create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector,
 			break;
 		}
 
-		dc_result = dc_validate_stream(adev->dm.dc, stream);
+		if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
+			dc_result = dm_dp_mst_is_port_support_mode(aconnector, stream);
+
+		if (dc_result == DC_OK)
+			dc_result = dc_validate_stream(adev->dm.dc, stream);
 
 		if (dc_result != DC_OK) {
 			DRM_DEBUG_KMS("Mode %dx%d (clk %d) failed DC validation with error %d (%s)\n",
@@ -7559,7 +7563,7 @@ static void dm_encoder_helper_disable(struct drm_encoder *encoder)
 
 }
 
-static int convert_dc_color_depth_into_bpc (enum dc_color_depth display_color_depth)
+int convert_dc_color_depth_into_bpc(enum dc_color_depth display_color_depth)
 {
 	switch (display_color_depth) {
 		case COLOR_DEPTH_666:
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index cbd2e8f2ae50..8241a3795762 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -583,7 +583,6 @@ struct amdgpu_dm_connector {
 	struct drm_dp_mst_port *port;
 	struct amdgpu_dm_connector *mst_port;
 	struct drm_dp_aux *dsc_aux;
-
 	/* TODO see if we can merge with ddc_bus or make a dm_connector */
 	struct amdgpu_i2c_adapter *i2c;
 
@@ -747,4 +746,6 @@ int dm_atomic_get_state(struct drm_atomic_state *state,
 struct amdgpu_dm_connector *
 amdgpu_dm_find_first_crtc_matching_connector(struct drm_atomic_state *state,
 					     struct drm_crtc *crtc);
+
+int convert_dc_color_depth_into_bpc(enum dc_color_depth display_color_depth);
 #endif /* __AMDGPU_DM_H__ */
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index d005bb6a2956..ee5d6fa34a6b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -1353,4 +1353,40 @@ bool pre_validate_dsc(struct drm_atomic_state *state,
 
 	return (ret == 0);
 }
+
 #endif
+
+enum dc_status dm_dp_mst_is_port_support_mode(
+	struct amdgpu_dm_connector *aconnector,
+	struct dc_stream_state *stream)
+{
+	int bpp, pbn, branch_max_throughput_mps = 0;
+
+	/* check if mode could be supported within fUll_pbn */
+	bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3;
+	pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false);
+	if (pbn > aconnector->port->full_pbn)
+		return DC_FAIL_BANDWIDTH_VALIDATE;
+
+	/* check is mst dsc output bandwidth branch_overall_throughput_0_mps */
+	switch (stream->timing.pixel_encoding) {
+	case PIXEL_ENCODING_RGB:
+	case PIXEL_ENCODING_YCBCR444:
+		branch_max_throughput_mps =
+			aconnector->dc_sink->dsc_caps.dsc_dec_caps.branch_overall_throughput_0_mps;
+		break;
+	case PIXEL_ENCODING_YCBCR422:
+	case PIXEL_ENCODING_YCBCR420:
+		branch_max_throughput_mps =
+			aconnector->dc_sink->dsc_caps.dsc_dec_caps.branch_overall_throughput_1_mps;
+		break;
+	default:
+		break;
+	}
+
+	if (branch_max_throughput_mps != 0 &&
+		((stream->timing.pix_clk_100hz / 10) >  branch_max_throughput_mps * 1000))
+		return DC_FAIL_BANDWIDTH_VALIDATE;
+
+	return DC_OK;
+}
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
index 2e13027d9b88..b92a7c5671aa 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
@@ -63,4 +63,8 @@ bool pre_validate_dsc(struct drm_atomic_state *state,
 		      struct dm_atomic_state **dm_state_ptr,
 		      struct dsc_mst_fairness_vars *vars);
 
+enum dc_status dm_dp_mst_is_port_support_mode(
+	struct amdgpu_dm_connector *aconnector,
+	struct dc_stream_state *stream);
+
 #endif
-- 
2.25.1

[PATCH 08/31] drm/amd/display: Fix eDP not light up on resume

[Rodrigo Siqueira]

From: Sung Joon Kim <sungkim@amd.com>

[why]
Only on VG, if external display is disconnected during S3 suspend, the
internal panel doesn't light up on resume because we set the power state
using an unsupported DPCD register SET_POWER.  To check the register is
supported, we need to check SET_POWER_CAPABLE first which is
eDP-specific DPCD register field.

[how]
Check the SET_POWER_CAPABLE register field and decide the control of the
eDP power state based on the read register value.

Reviewed-by: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c    | 6 +++++-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 7 +++++++
 drivers/gpu/drm/amd/display/dc/dc.h              | 1 +
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index fac27b45230f..82b74ee5f0c3 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1104,9 +1104,13 @@ static bool detect_link_and_local_sink(struct dc_link *link,
 				dc_ctx->dce_version == DCN_VERSION_3_01 &&
 				link->dpcd_caps.sink_dev_id == DP_BRANCH_DEVICE_ID_0022B9 &&
 				memcmp(&link->dpcd_caps.branch_dev_name, DP_SINK_BRANCH_DEV_NAME_7580,
-					sizeof(link->dpcd_caps.branch_dev_name)) == 0)
+					sizeof(link->dpcd_caps.branch_dev_name)) == 0) {
 				dc->config.edp_no_power_sequencing = true;
 
+				if (!link->dpcd_caps.set_power_state_capable_edp)
+					link->wa_flags.dp_keep_receiver_powered = true;
+			}
+
 			sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
 			sink_caps.signal = SIGNAL_TYPE_EDP;
 			break;
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index f9c10d044da6..fd95bd51988b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5832,6 +5832,7 @@ void detect_edp_sink_caps(struct dc_link *link)
 	uint32_t link_rate_in_khz;
 	enum dc_link_rate link_rate = LINK_RATE_UNKNOWN;
 	uint8_t backlight_adj_cap;
+	uint8_t general_edp_cap;
 
 	retrieve_link_cap(link);
 	link->dpcd_caps.edp_supported_link_rates_count = 0;
@@ -5870,6 +5871,12 @@ void detect_edp_sink_caps(struct dc_link *link)
 	link->dpcd_caps.dynamic_backlight_capable_edp =
 				(backlight_adj_cap & DP_EDP_DYNAMIC_BACKLIGHT_CAP) ? true:false;
 
+	core_link_read_dpcd(link, DP_EDP_GENERAL_CAP_1,
+						&general_edp_cap, sizeof(general_edp_cap));
+
+	link->dpcd_caps.set_power_state_capable_edp =
+				(general_edp_cap & DP_EDP_SET_POWER_CAP) ? true:false;
+
 	dc_link_set_default_brightness_aux(link);
 
 	core_link_read_dpcd(link, DP_EDP_DPCD_REV,
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index ba57e03d3d9e..51f5d75bf9e3 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1245,6 +1245,7 @@ struct dpcd_caps {
 	bool panel_mode_edp;
 	bool dpcd_display_control_capable;
 	bool ext_receiver_cap_field_present;
+	bool set_power_state_capable_edp;
 	bool dynamic_backlight_capable_edp;
 	union dpcd_fec_capability fec_cap;
 	struct dpcd_dsc_capabilities dsc_caps;
-- 
2.25.1

[PATCH 09/31] drm/amd/display: Turn off internal backlight when plugging external monitor

[Rodrigo Siqueira]

From: Sung Joon Kim <sungkim@amd.com>

[why]
For VG, we want to turn off power/backlight of the intenral panel when
plugging in external monitor and going to "external monitor only" mode.

[how]
For turning off power of the internal panel, ignore the config flag whic
bypasses power sequencing for eDP panels.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index fd95bd51988b..ef771471aa39 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -7275,8 +7275,7 @@ void dp_disable_link_phy(struct dc_link *link, const struct link_resource *link_
 			link->dc->hwss.edp_backlight_control(link, false);
 		if (link_hwss->ext.disable_dp_link_output)
 			link_hwss->ext.disable_dp_link_output(link, link_res, signal);
-		if (!link->dc->config.edp_no_power_sequencing)
-			link->dc->hwss.edp_power_control(link, false);
+		link->dc->hwss.edp_power_control(link, false);
 	} else {
 		if (dmcu != NULL && dmcu->funcs->lock_phy)
 			dmcu->funcs->lock_phy(dmcu);
-- 
2.25.1

[PATCH 10/31] drm/amd/display: Add SMU logging code

[Rodrigo Siqueira]

From: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>

[WHY]
Logging for SMU response value after the wait allows us to know
immediately what the response value was. Makes it easier to debug should
the value be anything other than OK.

[HOW]
Using the the already available DC SMU logging functions.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
---
 .../display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c  | 12 ++++++++++++
 .../drm/amd/display/dc/clk_mgr/dcn301/dcn301_smu.c   | 12 ++++++++++++
 .../gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c |  8 ++++++++
 .../drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c   |  8 ++++++++
 .../drm/amd/display/dc/clk_mgr/dcn316/dcn316_smu.c   |  8 ++++++++
 5 files changed, 48 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c
index 30c6f9cd717f..4137394a6ace 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c
@@ -41,6 +41,12 @@
 #define FN(reg_name, field) \
 	FD(reg_name##__##field)
 
+#include "logger_types.h"
+#undef DC_LOGGER
+#define DC_LOGGER \
+	CTX->logger
+#define smu_print(str, ...) {DC_LOG_SMU(str, ##__VA_ARGS__); }
+
 #define VBIOSSMC_MSG_TestMessage                  0x1
 #define VBIOSSMC_MSG_GetSmuVersion                0x2
 #define VBIOSSMC_MSG_PowerUpGfx                   0x3
@@ -97,6 +103,12 @@ static int rn_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
 	result = rn_smu_wait_for_response(clk_mgr, 10, 200000);
 	ASSERT(result == VBIOSSMC_Result_OK);
 
+	smu_print("SMU response after wait: %d\n", result);
+
+	if (result == VBIOSSMC_Status_BUSY) {
+		return -1;
+	}
+
 	/* First clear response register */
 	REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Status_BUSY);
 
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/dcn301_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/dcn301_smu.c
index 1cae01a91a69..d8f03328558b 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/dcn301_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/dcn301_smu.c
@@ -41,6 +41,12 @@
 #define FN(reg_name, field) \
 	FD(reg_name##__##field)
 
+#include "logger_types.h"
+#undef DC_LOGGER
+#define DC_LOGGER \
+	CTX->logger
+#define smu_print(str, ...) {DC_LOG_SMU(str, ##__VA_ARGS__); }
+
 #define VBIOSSMC_MSG_GetSmuVersion                0x2
 #define VBIOSSMC_MSG_SetDispclkFreq               0x4
 #define VBIOSSMC_MSG_SetDprefclkFreq              0x5
@@ -96,6 +102,12 @@ static int dcn301_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
 
 	result = dcn301_smu_wait_for_response(clk_mgr, 10, 200000);
 
+	smu_print("SMU response after wait: %d\n", result);
+
+	if (result == VBIOSSMC_Status_BUSY) {
+		return -1;
+	}
+
 	/* First clear response register */
 	REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Status_BUSY);
 
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c
index c5d7d075026f..6a17f7ed4d01 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c
@@ -40,6 +40,12 @@
 #define FN(reg_name, field) \
 	FD(reg_name##__##field)
 
+#include "logger_types.h"
+#undef DC_LOGGER
+#define DC_LOGGER \
+	CTX->logger
+#define smu_print(str, ...) {DC_LOG_SMU(str, ##__VA_ARGS__); }
+
 #define VBIOSSMC_MSG_TestMessage                  0x1
 #define VBIOSSMC_MSG_GetSmuVersion                0x2
 #define VBIOSSMC_MSG_PowerUpGfx                   0x3
@@ -104,6 +110,8 @@ static int dcn31_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
 	result = dcn31_smu_wait_for_response(clk_mgr, 10, 200000);
 	ASSERT(result == VBIOSSMC_Result_OK);
 
+	smu_print("SMU response after wait: %d\n", result);
+
 	if (result == VBIOSSMC_Status_BUSY) {
 		return -1;
 	}
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c
index 2600313fea57..74a78fda62fb 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c
@@ -70,6 +70,12 @@ static const struct IP_BASE NBIO_BASE = { { { { 0x00000000, 0x00000014, 0x00000D
 #define REG_NBIO(reg_name) \
 	(NBIO_BASE.instance[0].segment[regBIF_BX_PF2_ ## reg_name ## _BASE_IDX] + regBIF_BX_PF2_ ## reg_name)
 
+#include "logger_types.h"
+#undef DC_LOGGER
+#define DC_LOGGER \
+	CTX->logger
+#define smu_print(str, ...) {DC_LOG_SMU(str, ##__VA_ARGS__); }
+
 #define mmMP1_C2PMSG_3                            0x3B1050C
 
 #define VBIOSSMC_MSG_TestMessage                  0x01 ///< To check if PMFW is alive and responding. Requirement specified by PMFW team
@@ -132,6 +138,8 @@ static int dcn315_smu_send_msg_with_param(
 	result = dcn315_smu_wait_for_response(clk_mgr, 10, 200000);
 	ASSERT(result == VBIOSSMC_Result_OK);
 
+	smu_print("SMU response after wait: %d\n", result);
+
 	if (result == VBIOSSMC_Status_BUSY) {
 		return -1;
 	}
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_smu.c
index dceec4b96052..b2d1f24cfb80 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_smu.c
@@ -58,6 +58,12 @@ static const struct IP_BASE MP0_BASE = { { { { 0x00016000, 0x00DC0000, 0x00E0000
 #define FN(reg_name, field) \
 	FD(reg_name##__##field)
 
+#include "logger_types.h"
+#undef DC_LOGGER
+#define DC_LOGGER \
+	CTX->logger
+#define smu_print(str, ...) {DC_LOG_SMU(str, ##__VA_ARGS__); }
+
 #define VBIOSSMC_MSG_TestMessage                  0x01 ///< To check if PMFW is alive and responding. Requirement specified by PMFW team
 #define VBIOSSMC_MSG_GetPmfwVersion               0x02 ///< Get PMFW version
 #define VBIOSSMC_MSG_Spare0                       0x03 ///< Spare0
@@ -120,6 +126,8 @@ static int dcn316_smu_send_msg_with_param(
 	result = dcn316_smu_wait_for_response(clk_mgr, 10, 200000);
 	ASSERT(result == VBIOSSMC_Result_OK);
 
+	smu_print("SMU response after wait: %d\n", result);
+
 	if (result == VBIOSSMC_Status_BUSY) {
 		return -1;
 	}
-- 
2.25.1

[PATCH 11/31] drm/amd/display: Fix DC warning at driver load

[Rodrigo Siqueira]

From: Qingqing Zhuo <qingqing.zhuo@amd.com>

[Why]
Wrong index was checked for dcfclk_mhz, causing false warning.

[How]
Fix the assertion index.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
index fb4ae800e919..f4381725b210 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
@@ -550,7 +550,7 @@ static void dcn315_clk_mgr_helper_populate_bw_params(
 		if (!bw_params->clk_table.entries[i].dtbclk_mhz)
 			bw_params->clk_table.entries[i].dtbclk_mhz = def_max.dtbclk_mhz;
 	}
-	ASSERT(bw_params->clk_table.entries[i].dcfclk_mhz);
+	ASSERT(bw_params->clk_table.entries[i-1].dcfclk_mhz);
 	bw_params->vram_type = bios_info->memory_type;
 	bw_params->num_channels = bios_info->ma_channel_number;
 	if (!bw_params->num_channels)
-- 
2.25.1

[PATCH 12/31] drm/amd/display: Change HDMI judgement condition.

[Rodrigo Siqueira]

From: "JinZe.Xu" <JinZe.Xu@amd.com>

[Why & How]
Use dc_is_hdmi_signal to determine signal type.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 82b74ee5f0c3..fb6ffcb0bc6b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -4374,7 +4374,7 @@ void core_link_enable_stream(
 			dp_set_dsc_enable(pipe_ctx, true);
 	}
 
-	if (pipe_ctx->stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) {
+	if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) {
 		core_link_set_avmute(pipe_ctx, false);
 	}
 }
-- 
2.25.1

[PATCH 13/31] drm/amd/display: Enrich the log in MST payload update

[Rodrigo Siqueira]

From: Wenjing Liu <wenjing.liu@amd.com>

[Why & How]
Enrich the log to provide more informatio in MST payload update.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index fb6ffcb0bc6b..43b55bc6e2db 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3831,11 +3831,14 @@ enum dc_status dc_link_reduce_mst_payload(struct pipe_ctx *pipe_ctx, uint32_t bw
 
 	for (i = 0; i < MAX_CONTROLLER_NUM; i++) {
 		DC_LOG_MST("stream_enc[%d]: %p      "
+				"stream[%d].hpo_dp_stream_enc: %p      "
 				"stream[%d].vcp_id: %d      "
 				"stream[%d].slot_count: %d\n",
 				i,
 				(void *) link->mst_stream_alloc_table.stream_allocations[i].stream_enc,
 				i,
+				(void *) link->mst_stream_alloc_table.stream_allocations[i].hpo_dp_stream_enc,
+				i,
 				link->mst_stream_alloc_table.stream_allocations[i].vcp_id,
 				i,
 				link->mst_stream_alloc_table.stream_allocations[i].slot_count);
@@ -3896,11 +3899,14 @@ enum dc_status dc_link_increase_mst_payload(struct pipe_ctx *pipe_ctx, uint32_t
 
 	for (i = 0; i < MAX_CONTROLLER_NUM; i++) {
 		DC_LOG_MST("stream_enc[%d]: %p      "
+				"stream[%d].hpo_dp_stream_enc: %p      "
 				"stream[%d].vcp_id: %d      "
 				"stream[%d].slot_count: %d\n",
 				i,
 				(void *) link->mst_stream_alloc_table.stream_allocations[i].stream_enc,
 				i,
+				(void *) link->mst_stream_alloc_table.stream_allocations[i].hpo_dp_stream_enc,
+				i,
 				link->mst_stream_alloc_table.stream_allocations[i].vcp_id,
 				i,
 				link->mst_stream_alloc_table.stream_allocations[i].slot_count);
-- 
2.25.1

[PATCH 14/31] drm/amd/display: Fix in overriding DP drive settings

[Rodrigo Siqueira]

From: George Shen <george.shen@amd.com>

[Why & How]
Check always_match_dpcd_with_hw_lane_settings bit before
overriding the DP drive settings

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index ef771471aa39..9f873d2cdcad 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1674,8 +1674,9 @@ static void override_training_settings(
 			: POST_CURSOR2_DISABLED;
 	}
 
-	dp_hw_to_dpcd_lane_settings(lt_settings,
-			lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings);
+	if (lt_settings->always_match_dpcd_with_hw_lane_settings)
+		dp_hw_to_dpcd_lane_settings(lt_settings,
+				lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings);
 
 	/* Initialize training timings */
 	if (overrides->cr_pattern_time != NULL)
-- 
2.25.1

[PATCH 15/31] drm/amd/display: rename lane_settings to hw_lane_settings

[Rodrigo Siqueira]

From: Wenjing Liu <wenjing.liu@amd.com>

[why]
This is one of the major steps to decouple hw lane settings
from dpcd lane settings.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c  |  8 ++++----
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c       | 10 +++++-----
 drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c     | 10 +++++-----
 .../gpu/drm/amd/display/include/link_service_types.h   |  1 -
 4 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 9a406378d906..01c98ad06cf0 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -544,11 +544,11 @@ static ssize_t dp_phy_settings_write(struct file *f, const char __user *buf,
 
 	/* apply phy settings from user */
 	for (r = 0; r < link_lane_settings.link_settings.lane_count; r++) {
-		link_lane_settings.lane_settings[r].VOLTAGE_SWING =
+		link_lane_settings.hw_lane_settings[r].VOLTAGE_SWING =
 				(enum dc_voltage_swing) (param[0]);
-		link_lane_settings.lane_settings[r].PRE_EMPHASIS =
+		link_lane_settings.hw_lane_settings[r].PRE_EMPHASIS =
 				(enum dc_pre_emphasis) (param[1]);
-		link_lane_settings.lane_settings[r].POST_CURSOR2 =
+		link_lane_settings.hw_lane_settings[r].POST_CURSOR2 =
 				(enum dc_post_cursor2) (param[2]);
 	}
 
@@ -742,7 +742,7 @@ static ssize_t dp_phy_test_pattern_debugfs_write(struct file *f, const char __us
 	}
 
 	for (i = 0; i < (unsigned int)(link_training_settings.link_settings.lane_count); i++)
-		link_training_settings.lane_settings[i] = link->cur_lane_setting[i];
+		link_training_settings.hw_lane_settings[i] = link->cur_lane_setting[i];
 
 	dc_link_set_test_pattern(
 		link,
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 9f873d2cdcad..dfee3ba8b234 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1660,15 +1660,15 @@ static void override_training_settings(
 		lt_settings->always_match_dpcd_with_hw_lane_settings = false;
 	}
 	for (lane = 0; lane < LANE_COUNT_DP_MAX; lane++) {
-		lt_settings->lane_settings[lane].VOLTAGE_SWING =
+		lt_settings->hw_lane_settings[lane].VOLTAGE_SWING =
 			lt_settings->voltage_swing != NULL ?
 			*lt_settings->voltage_swing :
 			VOLTAGE_SWING_LEVEL0;
-		lt_settings->lane_settings[lane].PRE_EMPHASIS =
+		lt_settings->hw_lane_settings[lane].PRE_EMPHASIS =
 			lt_settings->pre_emphasis != NULL ?
 			*lt_settings->pre_emphasis
 			: PRE_EMPHASIS_DISABLED;
-		lt_settings->lane_settings[lane].POST_CURSOR2 =
+		lt_settings->hw_lane_settings[lane].POST_CURSOR2 =
 			lt_settings->post_cursor2 != NULL ?
 			*lt_settings->post_cursor2
 			: POST_CURSOR2_DISABLED;
@@ -1935,8 +1935,8 @@ static void print_status_message(
 				link_rate,
 				lt_settings->link_settings.lane_count,
 				lt_result,
-				lt_settings->lane_settings[0].VOLTAGE_SWING,
-				lt_settings->lane_settings[0].PRE_EMPHASIS,
+				lt_settings->hw_lane_settings[0].VOLTAGE_SWING,
+				lt_settings->hw_lane_settings[0].PRE_EMPHASIS,
 				lt_spread);
 }
 
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
index 1b7a8774b0c9..a29ebd9dbbcd 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
@@ -177,13 +177,13 @@ static uint8_t dpia_build_set_config_data(enum dpia_set_config_type type,
 		break;
 	case DPIA_SET_CFG_SET_VSPE:
 		/* Assume all lanes have same drive settings. */
-		data.set_vspe.swing = lt_settings->lane_settings[0].VOLTAGE_SWING;
-		data.set_vspe.pre_emph = lt_settings->lane_settings[0].PRE_EMPHASIS;
+		data.set_vspe.swing = lt_settings->hw_lane_settings[0].VOLTAGE_SWING;
+		data.set_vspe.pre_emph = lt_settings->hw_lane_settings[0].PRE_EMPHASIS;
 		data.set_vspe.max_swing_reached =
-			lt_settings->lane_settings[0].VOLTAGE_SWING ==
+			lt_settings->hw_lane_settings[0].VOLTAGE_SWING ==
 			VOLTAGE_SWING_MAX_LEVEL ? 1 : 0;
 		data.set_vspe.max_pre_emph_reached =
-			lt_settings->lane_settings[0].PRE_EMPHASIS ==
+			lt_settings->hw_lane_settings[0].PRE_EMPHASIS ==
 			PRE_EMPHASIS_MAX_LEVEL ? 1 : 0;
 		break;
 	default:
@@ -405,7 +405,7 @@ static enum link_training_result dpia_training_cr_non_transparent(
 
 		/* Update VS/PE. */
 		dp_decide_lane_settings(lt_settings, dpcd_lane_adjust,
-				lt_settings->lane_settings,
+				lt_settings->hw_lane_settings,
 				lt_settings->dpcd_lane_settings);
 		retry_count++;
 	}
diff --git a/drivers/gpu/drm/amd/display/include/link_service_types.h b/drivers/gpu/drm/amd/display/include/link_service_types.h
index 23f7d7354aaa..79fabc51c991 100644
--- a/drivers/gpu/drm/amd/display/include/link_service_types.h
+++ b/drivers/gpu/drm/amd/display/include/link_service_types.h
@@ -94,7 +94,6 @@ struct link_training_settings {
 	/* TODO: turn lane settings below into mandatory fields
 	 * as initial lane configuration
 	 */
-	struct dc_lane_settings lane_settings[LANE_COUNT_DP_MAX];
 	enum dc_voltage_swing *voltage_swing;
 	enum dc_pre_emphasis *pre_emphasis;
 	enum dc_post_cursor2 *post_cursor2;
-- 
2.25.1

[PATCH 16/31] drm/amd/display: refactor function transmitter_to_phy_id

[Rodrigo Siqueira]

From: Nicholas Choi <Nicholas.Choi@amd.com>

[Why & How]
Since we only need transmitter value in function transmitter_to_phy_id().
Replace argument struct dc_link with enum transmitter.

Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 43b55bc6e2db..58882d42eff5 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3185,8 +3185,11 @@ bool dc_link_get_psr_state(const struct dc_link *link, enum dc_psr_state *state)
 }
 
 static inline enum physical_phy_id
-transmitter_to_phy_id(enum transmitter transmitter_value)
+transmitter_to_phy_id(struct dc_link *link)
 {
+	struct dc_context *dc_ctx = link->ctx;
+	enum transmitter transmitter_value = link->link_enc->transmitter;
+
 	switch (transmitter_value) {
 	case TRANSMITTER_UNIPHY_A:
 		return PHYLD_0;
@@ -3213,8 +3216,7 @@ transmitter_to_phy_id(enum transmitter transmitter_value)
 	case TRANSMITTER_UNKNOWN:
 		return PHYLD_UNKNOWN;
 	default:
-		WARN_ONCE(1, "Unknown transmitter value %d\n",
-			  transmitter_value);
+		DC_ERROR("Unknown transmitter value %d\n", transmitter_value);
 		return PHYLD_UNKNOWN;
 	}
 }
@@ -3331,7 +3333,7 @@ bool dc_link_setup_psr(struct dc_link *link,
 	psr_context->phyType = PHY_TYPE_UNIPHY;
 	/*PhyId is associated with the transmitter id*/
 	psr_context->smuPhyId =
-		transmitter_to_phy_id(link->link_enc->transmitter);
+		transmitter_to_phy_id(link);
 
 	psr_context->crtcTimingVerticalTotal = stream->timing.v_total;
 	psr_context->vsync_rate_hz = div64_u64(div64_u64((stream->
-- 
2.25.1

Re: [PATCH 16/31] drm/amd/display: refactor function transmitter_to_phy_id

[Nathan Chancellor]

Hi Rodrigo,

On Fri, Jun 17, 2022 at 03:34:57PM -0400, Rodrigo Siqueira wrote:
> From: Nicholas Choi <Nicholas.Choi@amd.com>
> 
> [Why & How]
> Since we only need transmitter value in function transmitter_to_phy_id().
> Replace argument struct dc_link with enum transmitter.
> 
> Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
> Acked-by: Alan Liu <HaoPing.Liu@amd.com>
> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

How did I end up in the signoff chain for a patch I have never seen up
until this point? That should definitely be cleaned up.

Additionally, this commit message doesn't really seem to line up with
the change. It says that "struct dc_link" is being replaced with "enum
transmitter", when it is really the reverse, and that only the
transmitter value is needed, which is already the case, right? I guess
this is so that you can use DC_ERROR(), which requires a dc_ctx
variable? It is not immediately obvious from the commit message so that
should be clarified as well.

Cheers,
Nathan

> ---
>  drivers/gpu/drm/amd/display/dc/core/dc_link.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
> index 43b55bc6e2db..58882d42eff5 100644
> --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
> +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
> @@ -3185,8 +3185,11 @@ bool dc_link_get_psr_state(const struct dc_link *link, enum dc_psr_state *state)
>  }
>  
>  static inline enum physical_phy_id
> -transmitter_to_phy_id(enum transmitter transmitter_value)
> +transmitter_to_phy_id(struct dc_link *link)
>  {
> +	struct dc_context *dc_ctx = link->ctx;
> +	enum transmitter transmitter_value = link->link_enc->transmitter;
> +
>  	switch (transmitter_value) {
>  	case TRANSMITTER_UNIPHY_A:
>  		return PHYLD_0;
> @@ -3213,8 +3216,7 @@ transmitter_to_phy_id(enum transmitter transmitter_value)
>  	case TRANSMITTER_UNKNOWN:
>  		return PHYLD_UNKNOWN;
>  	default:
> -		WARN_ONCE(1, "Unknown transmitter value %d\n",
> -			  transmitter_value);
> +		DC_ERROR("Unknown transmitter value %d\n", transmitter_value);
>  		return PHYLD_UNKNOWN;
>  	}
>  }
> @@ -3331,7 +3333,7 @@ bool dc_link_setup_psr(struct dc_link *link,
>  	psr_context->phyType = PHY_TYPE_UNIPHY;
>  	/*PhyId is associated with the transmitter id*/
>  	psr_context->smuPhyId =
> -		transmitter_to_phy_id(link->link_enc->transmitter);
> +		transmitter_to_phy_id(link);
>  
>  	psr_context->crtcTimingVerticalTotal = stream->timing.v_total;
>  	psr_context->vsync_rate_hz = div64_u64(div64_u64((stream->
> -- 
> 2.25.1
> 
> 

Re: [PATCH 16/31] drm/amd/display: refactor function transmitter_to_phy_id

[Rodrigo Siqueira Jordao]

On 2022-06-17 15:51, Nathan Chancellor wrote:
> Hi Rodrigo,
> 
> On Fri, Jun 17, 2022 at 03:34:57PM -0400, Rodrigo Siqueira wrote:
>> From: Nicholas Choi <Nicholas.Choi@amd.com>
>>
>> [Why & How]
>> Since we only need transmitter value in function transmitter_to_phy_id().
>> Replace argument struct dc_link with enum transmitter.
>>
>> Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
>> Acked-by: Alan Liu <HaoPing.Liu@amd.com>
>> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
>> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> 
> How did I end up in the signoff chain for a patch I have never seen up
> until this point? That should definitely be cleaned up.
> 
> Additionally, this commit message doesn't really seem to line up with
> the change. It says that "struct dc_link" is being replaced with "enum
> transmitter", when it is really the reverse, and that only the
> transmitter value is needed, which is already the case, right? I guess
> this is so that you can use DC_ERROR(), which requires a dc_ctx
> variable? It is not immediately obvious from the commit message so that
> should be clarified as well.

Hi Nathan,

Thanks for reporting this error; it looks like our scripts have some 
issues. I'll take a look at that.

About this patch, I'll drop it.

Thanks
Siqueira

> Cheers,
> Nathan
> 
>> ---
>>   drivers/gpu/drm/amd/display/dc/core/dc_link.c | 10 ++++++----
>>   1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
>> index 43b55bc6e2db..58882d42eff5 100644
>> --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
>> +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
>> @@ -3185,8 +3185,11 @@ bool dc_link_get_psr_state(const struct dc_link *link, enum dc_psr_state *state)
>>   }
>>   
>>   static inline enum physical_phy_id
>> -transmitter_to_phy_id(enum transmitter transmitter_value)
>> +transmitter_to_phy_id(struct dc_link *link)
>>   {
>> +	struct dc_context *dc_ctx = link->ctx;
>> +	enum transmitter transmitter_value = link->link_enc->transmitter;
>> +
>>   	switch (transmitter_value) {
>>   	case TRANSMITTER_UNIPHY_A:
>>   		return PHYLD_0;
>> @@ -3213,8 +3216,7 @@ transmitter_to_phy_id(enum transmitter transmitter_value)
>>   	case TRANSMITTER_UNKNOWN:
>>   		return PHYLD_UNKNOWN;
>>   	default:
>> -		WARN_ONCE(1, "Unknown transmitter value %d\n",
>> -			  transmitter_value);
>> +		DC_ERROR("Unknown transmitter value %d\n", transmitter_value);
>>   		return PHYLD_UNKNOWN;
>>   	}
>>   }
>> @@ -3331,7 +3333,7 @@ bool dc_link_setup_psr(struct dc_link *link,
>>   	psr_context->phyType = PHY_TYPE_UNIPHY;
>>   	/*PhyId is associated with the transmitter id*/
>>   	psr_context->smuPhyId =
>> -		transmitter_to_phy_id(link->link_enc->transmitter);
>> +		transmitter_to_phy_id(link);
>>   
>>   	psr_context->crtcTimingVerticalTotal = stream->timing.v_total;
>>   	psr_context->vsync_rate_hz = div64_u64(div64_u64((stream->
>> -- 
>> 2.25.1
>>
>>

[PATCH 17/31] drm/amd/display: Change initializer to single brace

[Rodrigo Siqueira]

From: Aric Cyr <aric.cyr@amd.com>

[Why & How]
Change struct initializer from multiple brace to single brace.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c |  4 +--
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c  |  6 ++--
 .../drm/amd/display/dc/core/dc_link_dpia.c    | 28 +++++++++----------
 3 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 58882d42eff5..b021ea49bece 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1528,7 +1528,7 @@ static bool dc_link_construct_legacy(struct dc_link *link,
 				     const struct link_init_data *init_params)
 {
 	uint8_t i;
-	struct ddc_service_init_data ddc_service_init_data = { { 0 } };
+	struct ddc_service_init_data ddc_service_init_data = { 0 };
 	struct dc_context *dc_ctx = init_params->ctx;
 	struct encoder_init_data enc_init_data = { 0 };
 	struct panel_cntl_init_data panel_cntl_init_data = { 0 };
@@ -1828,7 +1828,7 @@ static bool dc_link_construct_legacy(struct dc_link *link,
 static bool dc_link_construct_dpia(struct dc_link *link,
 				   const struct link_init_data *init_params)
 {
-	struct ddc_service_init_data ddc_service_init_data = { { 0 } };
+	struct ddc_service_init_data ddc_service_init_data = { 0 };
 	struct dc_context *dc_ctx = init_params->ctx;
 
 	DC_LOGGER_INIT(dc_ctx->logger);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index dfee3ba8b234..76efac8300a9 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -638,7 +638,7 @@ static void dpcd_set_lt_pattern_and_lane_settings(
 	uint32_t dpcd_base_lt_offset;
 
 	uint8_t dpcd_lt_buffer[5] = {0};
-	union dpcd_training_pattern dpcd_pattern = { 0 };
+	union dpcd_training_pattern dpcd_pattern = {0};
 	uint32_t size_in_bytes;
 	bool edp_workaround = false; /* TODO link_prop.INTERNAL */
 	dpcd_base_lt_offset = DP_TRAINING_PATTERN_SET;
@@ -1369,7 +1369,7 @@ static enum link_training_result perform_clock_recovery_sequence(
 	enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
 	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX];
 	union lane_align_status_updated dpcd_lane_status_updated;
-	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = { { {0} } };
+	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
 
 	retries_cr = 0;
 	retry_count = 0;
@@ -2164,7 +2164,7 @@ static enum link_training_result dp_perform_128b_132b_cds_done_sequence(
 	enum link_training_result result = LINK_TRAINING_SUCCESS;
 	union lane_align_status_updated dpcd_lane_status_updated = {0};
 	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0};
-	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = { { {0} } };
+	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
 	uint32_t wait_time = 0;
 
 	/* initiate CDS done sequence */
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
index a29ebd9dbbcd..03f7249df1ef 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
@@ -226,7 +226,7 @@ static enum dc_status dpcd_set_lt_pattern(struct dc_link *link,
 	enum dc_dp_training_pattern pattern,
 	uint32_t hop)
 {
-	union dpcd_training_pattern dpcd_pattern = { {0} };
+	union dpcd_training_pattern dpcd_pattern = {0};
 	uint32_t dpcd_tps_offset = DP_TRAINING_PATTERN_SET;
 	enum dc_status status;
 
@@ -287,9 +287,9 @@ static enum link_training_result dpia_training_cr_non_transparent(
 	/* From DP spec, CR read interval is always 100us. */
 	uint32_t wait_time_microsec = TRAINING_AUX_RD_INTERVAL;
 	enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
-	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = { { {0} } };
-	union lane_align_status_updated dpcd_lane_status_updated = { {0} };
-	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = { { {0} } };
+	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0};
+	union lane_align_status_updated dpcd_lane_status_updated = {0};
+	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
 	uint8_t set_cfg_data;
 	enum dpia_set_config_ts ts;
 
@@ -445,9 +445,9 @@ static enum link_training_result dpia_training_cr_transparent(
 	uint32_t retry_count = 0;
 	uint32_t wait_time_microsec = lt_settings->cr_pattern_time;
 	enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
-	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = { { {0} } };
-	union lane_align_status_updated dpcd_lane_status_updated = { {0} };
-	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = { { {0} } };
+	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0};
+	union lane_align_status_updated dpcd_lane_status_updated = {0};
+	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
 
 	/* Cap of LINK_TRAINING_MAX_CR_RETRY attempts at clock recovery.
 	 * Fix inherited from perform_clock_recovery_sequence() -
@@ -599,9 +599,9 @@ static enum link_training_result dpia_training_eq_non_transparent(
 	enum dc_dp_training_pattern tr_pattern;
 	uint32_t wait_time_microsec;
 	enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
-	union lane_align_status_updated dpcd_lane_status_updated = { {0} };
-	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = { { {0} } };
-	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = { { {0} } };
+	union lane_align_status_updated dpcd_lane_status_updated = {0};
+	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0};
+	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
 	uint8_t set_cfg_data;
 	enum dpia_set_config_ts ts;
 
@@ -738,9 +738,9 @@ static enum link_training_result dpia_training_eq_transparent(
 	enum dc_dp_training_pattern tr_pattern = lt_settings->pattern_for_eq;
 	uint32_t wait_time_microsec;
 	enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
-	union lane_align_status_updated dpcd_lane_status_updated = { {0} };
-	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = { { {0} } };
-	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = { { {0} } };
+	union lane_align_status_updated dpcd_lane_status_updated = {0};
+	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0};
+	union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
 
 	wait_time_microsec = dpia_get_eq_aux_rd_interval(link, lt_settings, DPRX);
 
@@ -827,7 +827,7 @@ static enum link_training_result dpia_training_eq_phase(
 /* End training of specified hop in display path. */
 static enum dc_status dpcd_clear_lt_pattern(struct dc_link *link, uint32_t hop)
 {
-	union dpcd_training_pattern dpcd_pattern = { {0} };
+	union dpcd_training_pattern dpcd_pattern = {0};
 	uint32_t dpcd_tps_offset = DP_TRAINING_PATTERN_SET;
 	enum dc_status status;
 
-- 
2.25.1

[PATCH 18/31] drm/amd/display: Fix typo in override_lane_settings

[Rodrigo Siqueira]

From: George Shen <george.shen@amd.com>

[Why]
The function currently skips overriding the drive
settings of the first lane.

[How]
Change for loop to start at 0 instead of 1.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 76efac8300a9..972dbbcc36da 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -944,7 +944,7 @@ static void override_lane_settings(const struct link_training_settings *lt_setti
 
 		return;
 
-	for (lane = 1; lane < LANE_COUNT_DP_MAX; lane++) {
+	for (lane = 0; lane < LANE_COUNT_DP_MAX; lane++) {
 		if (lt_settings->voltage_swing)
 			lane_settings[lane].VOLTAGE_SWING = *lt_settings->voltage_swing;
 		if (lt_settings->pre_emphasis)
-- 
2.25.1

[PATCH 19/31] drm/amd/display: Handle downstream LTTPR with fixed VS sequence

[Rodrigo Siqueira]

From: George Shen <George.Shen@amd.com>

[Why]
Several issues were discovered that caused link
training to fail when an LTTPR device is
connected downstream for the fixed VS sequence.

[How]
The following were added:
- workaround to configure AUX timeout
for fixed VS sequence
- additional delay before disabling
fixed VS intercept
- detection of fixed VS deadlock state and
performing DPCD sequence to recover

Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
---
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c  | 43 ++++++++++++++++---
 drivers/gpu/drm/amd/display/dc/dc.h           |  2 +
 .../drm/amd/display/dc/dcn31/dcn31_resource.c |  1 -
 3 files changed, 40 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 972dbbcc36da..c993b428ca7e 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2384,6 +2384,7 @@ static enum link_training_result dp_perform_fixed_vs_pe_training_sequence(
 			link->dpcd_caps.lttpr_caps.phy_repeater_cnt);
 	const uint8_t vendor_lttpr_write_data_intercept_en[4] = {0x1, 0x55, 0x63, 0x0};
 	const uint8_t vendor_lttpr_write_data_intercept_dis[4] = {0x1, 0x55, 0x63, 0x68};
+	uint32_t pre_disable_intercept_delay_ms = link->dc->debug.fixed_vs_aux_delay_config_wa;
 	uint8_t vendor_lttpr_write_data_vs[4] = {0x1, 0x51, 0x63, 0x0};
 	uint8_t vendor_lttpr_write_data_pe[4] = {0x1, 0x52, 0x63, 0x0};
 	uint32_t vendor_lttpr_write_address = 0xF004F;
@@ -2406,6 +2407,10 @@ static enum link_training_result dp_perform_fixed_vs_pe_training_sequence(
 	if (offset != 0xFF) {
 		vendor_lttpr_write_address +=
 				((DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE) * (offset - 1));
+
+		/* Certain display and cable configuration require extra delay */
+		if (offset > 2)
+			pre_disable_intercept_delay_ms = link->dc->debug.fixed_vs_aux_delay_config_wa * 2;
 	}
 
 	/* Vendor specific: Reset lane settings */
@@ -2485,6 +2490,7 @@ static enum link_training_result dp_perform_fixed_vs_pe_training_sequence(
 
 	/* Perform Clock Recovery Sequence */
 	if (status == LINK_TRAINING_SUCCESS) {
+		const uint8_t max_vendor_dpcd_retries = 10;
 		uint32_t retries_cr;
 		uint32_t retry_count;
 		uint32_t wait_time_microsec;
@@ -2492,6 +2498,8 @@ static enum link_training_result dp_perform_fixed_vs_pe_training_sequence(
 		union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX];
 		union lane_align_status_updated dpcd_lane_status_updated;
 		union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0};
+		enum dc_status dpcd_status = DC_OK;
+		uint8_t i = 0;
 
 		retries_cr = 0;
 		retry_count = 0;
@@ -2522,11 +2530,23 @@ static enum link_training_result dp_perform_fixed_vs_pe_training_sequence(
 						lt_settings->pattern_for_cr,
 						0);
 				/* Vendor specific: Disable intercept */
-				core_link_write_dpcd(
-						link,
-						vendor_lttpr_write_address,
-						&vendor_lttpr_write_data_intercept_dis[0],
-						sizeof(vendor_lttpr_write_data_intercept_dis));
+				for (i = 0; i < max_vendor_dpcd_retries; i++) {
+					msleep(pre_disable_intercept_delay_ms);
+					dpcd_status = core_link_write_dpcd(
+							link,
+							vendor_lttpr_write_address,
+							&vendor_lttpr_write_data_intercept_dis[0],
+							sizeof(vendor_lttpr_write_data_intercept_dis));
+
+					if (dpcd_status == DC_OK)
+						break;
+
+					core_link_write_dpcd(
+							link,
+							vendor_lttpr_write_address,
+							&vendor_lttpr_write_data_intercept_en[0],
+							sizeof(vendor_lttpr_write_data_intercept_en));
+				}
 			} else {
 				vendor_lttpr_write_data_vs[3] = 0;
 				vendor_lttpr_write_data_pe[3] = 0;
@@ -5190,6 +5210,19 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link)
 	determine_lttpr_mode(link);
 
 	if (link->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT || link->lttpr_mode == LTTPR_MODE_TRANSPARENT) {
+		if ((link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
+				!link->dc->debug.disable_fixed_vs_aux_timeout_wa) {
+			/* Fixed VS workaround for AUX timeout */
+			const uint32_t fixed_vs_address = 0xF004F;
+			const uint8_t fixed_vs_data[4] = {0x1, 0x22, 0x63, 0xc};
+
+			core_link_write_dpcd(
+					link,
+					fixed_vs_address,
+					fixed_vs_data,
+					sizeof(fixed_vs_data));
+		}
+
 		/* By reading LTTPR capability, RX assumes that we will enable
 		 * LTTPR extended aux timeout if LTTPR is present.
 		 */
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 51f5d75bf9e3..236a204d41ad 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -737,6 +737,8 @@ struct dc_debug_options {
 	bool enable_z9_disable_interface;
 	bool enable_sw_cntl_psr;
 	union dpia_debug_options dpia_debug;
+	bool disable_fixed_vs_aux_timeout_wa;
+	uint32_t fixed_vs_aux_delay_config_wa;
 	bool force_disable_subvp;
 	bool force_subvp_mclk_switch;
 	bool force_usr_allow;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index a67475251188..1a67d04cc017 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -890,7 +890,6 @@ static const struct dc_debug_options debug_defaults_drv = {
 	.disable_z10 = true,
 	.optimize_edp_link_rate = true,
 	.enable_sw_cntl_psr = true,
-	.apply_vendor_specific_lttpr_wa = true,
 	.enable_z9_disable_interface = true, /* Allow support for the PMFW interface for disable Z9*/
 	.dml_hostvm_override = DML_HOSTVM_OVERRIDE_FALSE,
 };
-- 
2.25.1

[PATCH 20/31] drm/amd/display: Remove unused vendor specific w/a

[Rodrigo Siqueira]

From: George Shen <George.Shen@amd.com>

[Why & How]
Old vendor specific w/a are no longer needed
and unused. Clean up codebase by removing them.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
---
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c  | 133 +-----------------
 drivers/gpu/drm/amd/display/dc/dc.h           |   1 -
 2 files changed, 4 insertions(+), 130 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index c993b428ca7e..76233db6876c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -329,51 +329,6 @@ static uint8_t get_dpcd_link_rate(const struct dc_link_settings *link_settings)
 	return link_rate;
 }
 
-static void vendor_specific_lttpr_wa_one_start(struct dc_link *link)
-{
-	const uint8_t vendor_lttpr_write_data[4] = {0x1, 0x50, 0x63, 0xff};
-	const uint8_t offset = dp_convert_to_count(
-			link->dpcd_caps.lttpr_caps.phy_repeater_cnt);
-	uint32_t vendor_lttpr_write_address = 0xF004F;
-
-	if (offset != 0xFF)
-		vendor_lttpr_write_address +=
-				((DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE) * (offset - 1));
-
-	/* W/A for certain LTTPR to reset their lane settings, part one of two */
-	core_link_write_dpcd(
-			link,
-			vendor_lttpr_write_address,
-			&vendor_lttpr_write_data[0],
-			sizeof(vendor_lttpr_write_data));
-}
-
-static void vendor_specific_lttpr_wa_one_two(
-	struct dc_link *link,
-	const uint8_t rate)
-{
-	if (link->apply_vendor_specific_lttpr_link_rate_wa) {
-		uint8_t toggle_rate = 0x0;
-
-		if (rate == 0x6)
-			toggle_rate = 0xA;
-		else
-			toggle_rate = 0x6;
-
-		if (link->vendor_specific_lttpr_link_rate_wa == rate) {
-			/* W/A for certain LTTPR to reset internal state for link training */
-			core_link_write_dpcd(
-					link,
-					DP_LINK_BW_SET,
-					&toggle_rate,
-					1);
-		}
-
-		/* Store the last attempted link rate for this link */
-		link->vendor_specific_lttpr_link_rate_wa = rate;
-	}
-}
-
 static void dp_fixed_vs_pe_read_lane_adjust(
 	struct dc_link *link,
 	union dpcd_training_lane dpcd_lane_adjust[LANE_COUNT_DP_MAX])
@@ -423,51 +378,6 @@ static void dp_fixed_vs_pe_read_lane_adjust(
 	}
 }
 
-static void vendor_specific_lttpr_wa_four(
-	struct dc_link *link,
-	bool apply_wa)
-{
-	const uint8_t vendor_lttpr_write_data_one[4] = {0x1, 0x55, 0x63, 0x8};
-	const uint8_t vendor_lttpr_write_data_two[4] = {0x1, 0x55, 0x63, 0x0};
-	const uint8_t offset = dp_convert_to_count(
-			link->dpcd_caps.lttpr_caps.phy_repeater_cnt);
-	uint32_t vendor_lttpr_write_address = 0xF004F;
-	uint8_t sink_status = 0;
-	uint8_t i;
-
-	if (offset != 0xFF)
-		vendor_lttpr_write_address +=
-				((DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE) * (offset - 1));
-
-	/* W/A to pass through DPCD write of TPS=0 to DPRX */
-	if (apply_wa) {
-		core_link_write_dpcd(
-				link,
-				vendor_lttpr_write_address,
-				&vendor_lttpr_write_data_one[0],
-				sizeof(vendor_lttpr_write_data_one));
-	}
-
-	/* clear training pattern set */
-	dpcd_set_training_pattern(link, DP_TRAINING_PATTERN_VIDEOIDLE);
-
-	if (apply_wa) {
-		core_link_write_dpcd(
-				link,
-				vendor_lttpr_write_address,
-				&vendor_lttpr_write_data_two[0],
-				sizeof(vendor_lttpr_write_data_two));
-	}
-
-	/* poll for intra-hop disable */
-	for (i = 0; i < 10; i++) {
-		if ((core_link_read_dpcd(link, DP_SINK_STATUS, &sink_status, 1) == DC_OK) &&
-				(sink_status & DP_INTRA_HOP_AUX_REPLY_INDICATION) == 0)
-			break;
-		udelay(1000);
-	}
-}
-
 static void dp_fixed_vs_pe_set_retimer_lane_settings(
 	struct dc_link *link,
 	const union dpcd_training_lane dpcd_lane_adjust[LANE_COUNT_DP_MAX],
@@ -561,14 +471,6 @@ enum dc_status dpcd_set_link_settings(
 				&lt_settings->link_settings.link_rate_set, 1);
 	} else {
 		rate = get_dpcd_link_rate(&lt_settings->link_settings);
-		if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-					(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
-					link->lttpr_mode == LTTPR_MODE_TRANSPARENT)
-			vendor_specific_lttpr_wa_one_start(link);
-
-		if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-					(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN))
-			vendor_specific_lttpr_wa_one_two(link, rate);
 
 		status = core_link_write_dpcd(link, DP_LINK_BW_SET, &rate, 1);
 	}
@@ -1303,12 +1205,6 @@ static enum link_training_result perform_channel_equalization_sequence(
 					dp_translate_training_aux_read_interval(
 						link->dpcd_caps.lttpr_caps.aux_rd_interval[offset - 1]);
 
-		if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-				(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
-				link->lttpr_mode == LTTPR_MODE_TRANSPARENT) {
-			wait_time_microsec = 16000;
-		}
-
 		dp_wait_for_training_aux_rd_interval(
 				link,
 				wait_time_microsec);
@@ -1415,11 +1311,6 @@ static enum link_training_result perform_clock_recovery_sequence(
 		/* 3. wait receiver to lock-on*/
 		wait_time_microsec = lt_settings->cr_pattern_time;
 
-		if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-				(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN)) {
-			wait_time_microsec = 16000;
-		}
-
 		dp_wait_for_training_aux_rd_interval(
 				link,
 				wait_time_microsec);
@@ -2752,14 +2643,7 @@ enum link_training_result dc_link_dp_perform_link_training(
 			&lt_settings);
 
 	/* reset previous training states */
-	if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-			(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
-			link->lttpr_mode == LTTPR_MODE_TRANSPARENT) {
-		link->apply_vendor_specific_lttpr_link_rate_wa = true;
-		vendor_specific_lttpr_wa_four(link, true);
-	} else {
-		dpcd_exit_training_mode(link);
-	}
+	dpcd_exit_training_mode(link);
 
 	/* configure link prior to entering training mode */
 	dpcd_configure_lttpr_mode(link, &lt_settings);
@@ -2780,14 +2664,7 @@ enum link_training_result dc_link_dp_perform_link_training(
 		ASSERT(0);
 
 	/* exit training mode */
-	if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-			(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
-			link->lttpr_mode == LTTPR_MODE_TRANSPARENT) {
-		link->apply_vendor_specific_lttpr_link_rate_wa = false;
-		vendor_specific_lttpr_wa_four(link, (status != LINK_TRAINING_SUCCESS));
-	} else {
-		dpcd_exit_training_mode(link);
-	}
+	dpcd_exit_training_mode(link);
 
 	/* switch to video idle */
 	if ((status == LINK_TRAINING_SUCCESS) || !skip_video_pattern)
@@ -4227,8 +4104,7 @@ static void dp_test_send_phy_test_pattern(struct dc_link *link)
 			&dpcd_lane_adjustment[0].raw,
 			sizeof(dpcd_lane_adjustment));
 
-	if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-			(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
+	if ((link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
 			link->lttpr_mode == LTTPR_MODE_TRANSPARENT)
 		dp_fixed_vs_pe_read_lane_adjust(
 				link,
@@ -6198,8 +6074,7 @@ bool dc_link_dp_set_test_pattern(
 	if (is_dp_phy_pattern(test_pattern)) {
 		/* Set DPCD Lane Settings before running test pattern */
 		if (p_link_settings != NULL) {
-			if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
-					(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
+			if ((link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) &&
 					link->lttpr_mode == LTTPR_MODE_TRANSPARENT) {
 				dp_fixed_vs_pe_set_retimer_lane_settings(
 						link,
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 236a204d41ad..81e308d59a97 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -744,7 +744,6 @@ struct dc_debug_options {
 	bool force_usr_allow;
 	/* uses value at boot and disables switch */
 	bool disable_dtb_ref_clk_switch;
-	bool apply_vendor_specific_lttpr_wa;
 	bool extended_blank_optimization;
 	union aux_wake_wa_options aux_wake_wa;
 	uint8_t psr_power_use_phy_fsm;
-- 
2.25.1

[PATCH 21/31] drm/amd/display: extract update stream allocation to link_hwss

[Rodrigo Siqueira]

From: Wenjing Liu <wenjing.liu@amd.com>

[Why & How]
Extract update stream allocation table into link hwss
as part of the link hwss refactor work.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c  | 10 +++++++---
 drivers/gpu/drm/amd/display/dc/inc/link_hwss.h |  6 +++---
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index b021ea49bece..f327d7327f7f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3873,7 +3873,6 @@ enum dc_status dc_link_increase_mst_payload(struct pipe_ctx *pipe_ctx, uint32_t
 	struct fixed31_32 avg_time_slots_per_mtp;
 	struct fixed31_32 pbn;
 	struct fixed31_32 pbn_per_slot;
-	struct link_encoder *link_encoder = link->link_enc;
 	struct dp_mst_stream_allocation_table proposed_table = {0};
 	uint8_t i;
 	enum act_return_status ret;
@@ -3917,8 +3916,13 @@ enum dc_status dc_link_increase_mst_payload(struct pipe_ctx *pipe_ctx, uint32_t
 	ASSERT(proposed_table.stream_count > 0);
 
 	/* update mst stream allocation table hardware state */
-	link_encoder->funcs->update_mst_stream_allocation_table(
-			link_encoder,
+	if (link_hwss->ext.update_stream_allocation_table == NULL ||
+			dp_get_link_encoding_format(&link->cur_link_settings) == DP_UNKNOWN_ENCODING) {
+		DC_LOG_ERROR("Failure: unknown encoding format\n");
+		return DC_ERROR_UNEXPECTED;
+	}
+
+	link_hwss->ext.update_stream_allocation_table(link, &pipe_ctx->link_res,
 			&link->mst_stream_alloc_table);
 
 	/* poll for immediate branch device ACT handled */
diff --git a/drivers/gpu/drm/amd/display/dc/inc/link_hwss.h b/drivers/gpu/drm/amd/display/dc/inc/link_hwss.h
index e6c49ef8b584..3482a877b6af 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/link_hwss.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/link_hwss.h
@@ -62,9 +62,9 @@ struct link_hwss_ext {
 			const struct link_resource *link_res,
 			struct encoder_set_dp_phy_pattern_param *tp_params);
 	void (*set_dp_lane_settings)(struct dc_link *link,
-		const struct link_resource *link_res,
-		const struct dc_link_settings *link_settings,
-		const struct dc_lane_settings lane_settings[LANE_COUNT_DP_MAX]);
+			const struct link_resource *link_res,
+			const struct dc_link_settings *link_settings,
+			const struct dc_lane_settings lane_settings[LANE_COUNT_DP_MAX]);
 	void (*update_stream_allocation_table)(struct dc_link *link,
 			const struct link_resource *link_res,
 			const struct link_mst_stream_allocation_table *table);
-- 
2.25.1

[PATCH 22/31] drm/amd/display: Fix in dp link-training when updating payload allocation table

[Rodrigo Siqueira]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[Why & How]
Check if aux is not accessible before updating payload allocation
table.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 76233db6876c..4027f439a5a4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -6823,6 +6823,13 @@ bool dpcd_write_128b_132b_sst_payload_allocation_table(
 		/// Leave req_slot_count = 0 if allocate is false.
 	}
 
+	proposed_table->stream_count = 1; /// Always 1 stream for SST
+	proposed_table->stream_allocations[0].slot_count = req_slot_count;
+	proposed_table->stream_allocations[0].vcp_id = vc_id;
+
+	if (link->aux_access_disabled)
+		return true;
+
 	/// Write DPCD 2C0 = 1 to start updating
 	update_status.bits.VC_PAYLOAD_TABLE_UPDATED = 1;
 	core_link_write_dpcd(
@@ -6890,10 +6897,6 @@ bool dpcd_write_128b_132b_sst_payload_allocation_table(
 		// TODO - DP2.0 Payload: Read and log the payload table from downstream branch
 	}
 
-	proposed_table->stream_count = 1; /// Always 1 stream for SST
-	proposed_table->stream_allocations[0].slot_count = req_slot_count;
-	proposed_table->stream_allocations[0].vcp_id = vc_id;
-
 	return result;
 }
 
@@ -6909,6 +6912,8 @@ bool dpcd_poll_for_allocation_change_trigger(struct dc_link *link)
 	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX];
 	union lane_align_status_updated lane_status_updated;
 
+	if (link->aux_access_disabled)
+		return true;
 	for (i = 0; i < act_retries; i++) {
 		get_lane_status(link, link->cur_link_settings.lane_count, dpcd_lane_status, &lane_status_updated);
 
-- 
2.25.1

[PATCH 23/31] drm/amd/display: Check minimum disp_clk and dpp_clk debug option

[Rodrigo Siqueira]

Our debug struct has the min_disp_clk_khz and min_dpp_clk_khz options,
which we ignore in the DCN32. This commit introduces those checks and
the necessary calculation.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
---
 .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c  | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index ed70ae10bdb1..b32880afb3fb 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -265,6 +265,25 @@ void dcn32_init_clocks(struct clk_mgr *clk_mgr_base)
 			&clk_mgr_base->bw_params->clk_table.entries[0].dispclk_mhz,
 			&num_levels);
 
+	if (clk_mgr_base->ctx->dc->debug.min_disp_clk_khz) {
+		unsigned int i;
+
+		for (i = 0; i < num_levels; i++)
+			if (clk_mgr_base->bw_params->clk_table.entries[i].dispclk_mhz
+					< khz_to_mhz_ceil(clk_mgr_base->ctx->dc->debug.min_disp_clk_khz))
+				clk_mgr_base->bw_params->clk_table.entries[i].dispclk_mhz
+					= khz_to_mhz_ceil(clk_mgr_base->ctx->dc->debug.min_disp_clk_khz);
+	}
+
+	if (clk_mgr_base->ctx->dc->debug.min_dpp_clk_khz) {
+		unsigned int i;
+
+		for (i = 0; i < num_levels; i++)
+			if (clk_mgr_base->bw_params->clk_table.entries[i].dppclk_mhz
+					< khz_to_mhz_ceil(clk_mgr_base->ctx->dc->debug.min_dpp_clk_khz))
+				clk_mgr_base->bw_params->clk_table.entries[i].dppclk_mhz
+					= khz_to_mhz_ceil(clk_mgr_base->ctx->dc->debug.min_dpp_clk_khz);
+	}
 
 	/* Get UCLK, update bounding box */
 	clk_mgr_base->funcs->get_memclk_states_from_smu(clk_mgr_base);
-- 
2.25.1

[PATCH 24/31] drm/amd/display: Update DPPCLK programming sequence

[Rodrigo Siqueira]

From: Alvin Lee <Alvin.Lee2@amd.com>

[Description]
- When lowering DPPCLK, we want to program the DPP DTO before updating
the DPP refclk.
- Also update DPPCLK to the exact frequency that will be set after clock
divider has been programmed. This will prevent rounding errors when
making the request to PMFW (we need DPP DTO to match exactly with the
exact DPP refclk).

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
---
 .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c  | 25 ++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index b32880afb3fb..bab85f3c9c67 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -325,6 +325,26 @@ static void dcn32_update_clocks_update_dtb_dto(struct clk_mgr_internal *clk_mgr,
 	}
 }
 
+/* Since DPPCLK request to PMFW needs to be exact (due to DPP DTO programming),
+ * update DPPCLK to be the exact frequency that will be set after the DPPCLK
+ * divider is updated. This will prevent rounding issues that could cause DPP
+ * refclk and DPP DTO to not match up.
+ */
+static void dcn32_update_dppclk_dispclk_freq(struct clk_mgr_internal *clk_mgr, struct dc_clocks *new_clocks)
+{
+	int dpp_divider = 0;
+	int disp_divider = 0;
+
+	dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz / new_clocks->dppclk_khz;
+	disp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz / new_clocks->dispclk_khz;
+
+	// Divide back the previous result to round up to the actual clock value that will be set from divider
+	new_clocks->dppclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / dpp_divider;
+	new_clocks->dispclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / disp_divider;
+}
+
 static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 			struct dc_state *context,
 			bool safe_to_lower)
@@ -448,13 +468,14 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 		}
 	}
 
+	dcn32_update_dppclk_dispclk_freq(clk_mgr, new_clocks);
 	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr_base->clks.dppclk_khz)) {
 		if (clk_mgr_base->clks.dppclk_khz > new_clocks->dppclk_khz)
 			dpp_clock_lowered = true;
 
 		clk_mgr_base->clks.dppclk_khz = new_clocks->dppclk_khz;
 
-		if (clk_mgr->smu_present)
+		if (clk_mgr->smu_present && !dpp_clock_lowered)
 			dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_DPPCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dppclk_khz));
 
 		update_dppclk = true;
@@ -488,6 +509,8 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 			/* if clock is being lowered, increase DTO before lowering refclk */
 			dcn20_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower);
 			dcn20_update_clocks_update_dentist(clk_mgr, context);
+			if (clk_mgr->smu_present)
+				dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_DPPCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dppclk_khz));
 		} else {
 			/* if clock is being raised, increase refclk before lowering DTO */
 			if (update_dppclk || update_dispclk)
-- 
2.25.1

[PATCH 25/31] drm/amd/display: Fix divide-by-zero in DPPCLK and DISPCLK calculation

[Rodrigo Siqueira]

From: George Shen <george.shen@amd.com>

[Why]
Certain use cases will pass in zero in the new_clocks parameter for all
clocks. This results in a divide-by-zero error when attempting to round
up the new clock.

When new_clocks are zero, no rounding is required, so we can skip it.

[How]
Guard the division calculation with a check to make sure clocks are not
zero.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
---
 .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c   | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index bab85f3c9c67..8ece88ddfb5b 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -335,14 +335,16 @@ static void dcn32_update_dppclk_dispclk_freq(struct clk_mgr_internal *clk_mgr, s
 	int dpp_divider = 0;
 	int disp_divider = 0;
 
-	dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->base.dentist_vco_freq_khz / new_clocks->dppclk_khz;
-	disp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->base.dentist_vco_freq_khz / new_clocks->dispclk_khz;
-
-	// Divide back the previous result to round up to the actual clock value that will be set from divider
-	new_clocks->dppclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / dpp_divider;
-	new_clocks->dispclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / disp_divider;
+	if (new_clocks->dppclk_khz) {
+		dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+				* clk_mgr->base.dentist_vco_freq_khz / new_clocks->dppclk_khz;
+		new_clocks->dppclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / dpp_divider;
+	}
+	if (new_clocks->dispclk_khz > 0) {
+		disp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+				* clk_mgr->base.dentist_vco_freq_khz / new_clocks->dispclk_khz;
+		new_clocks->dispclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / disp_divider;
+	}
 }
 
 static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
-- 
2.25.1

[PATCH 26/31] drm/amd/display: Update SW state correctly for FCLK

[Rodrigo Siqueira]

From: Alvin Lee <Alvin.Lee2@amd.com>

FCLK not supported for DCN321, but still need to update the software
state accordingly to prevent unneeded full updates in driver

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
---
 .../gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c    | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index 8ece88ddfb5b..90ba9576a6fb 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -431,12 +431,12 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 						clk_mgr_base->bw_params->clk_table.entries[clk_mgr_base->bw_params->clk_table.num_entries - 1].memclk_mhz);
 		}
 
-		if (clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21 &&
-				should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_p_state_change_support)) {
+		if (should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_p_state_change_support) &&
+				clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21) {
 			clk_mgr_base->clks.fclk_p_state_change_support = fclk_p_state_change_support;
 
 			/* To disable FCLK P-state switching, send FCLK_PSTATE_NOTSUPPORTED message to PMFW */
-			if (!clk_mgr_base->clks.fclk_p_state_change_support) {
+			if (clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21 && !clk_mgr_base->clks.fclk_p_state_change_support) {
 				/* Handle code for sending a message to PMFW that FCLK P-state change is not supported */
 				dcn32_smu_send_fclk_pstate_message(clk_mgr, FCLK_PSTATE_NOTSUPPORTED);
 			}
-- 
2.25.1

[PATCH 27/31] drm/amd/display: Get VCO frequency from registers

[Rodrigo Siqueira]

Add support to get VCO frequency from registers.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
---
 .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c  | 94 ++++++++++++++++++-
 .../gpu/drm/amd/display/dc/inc/hw/clk_mgr.h   |  3 +
 2 files changed, 96 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index 90ba9576a6fb..e3abadeca0a6 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -531,6 +531,96 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
 				clk_mgr_base->clks.dispclk_khz / 1000 / 7);
 }
 
+static uint32_t dcn32_get_vco_frequency_from_reg(struct clk_mgr_internal *clk_mgr)
+{
+		struct fixed31_32 pll_req;
+		uint32_t pll_req_reg = 0;
+
+		/* get FbMult value */
+		if (ASICREV_IS_GC_11_0_2(clk_mgr->base.ctx->asic_id.hw_internal_rev))
+			pll_req_reg = REG_READ(CLK0_CLK_PLL_REQ);
+		else
+			pll_req_reg = REG_READ(CLK1_CLK_PLL_REQ);
+
+		/* set up a fixed-point number
+		 * this works because the int part is on the right edge of the register
+		 * and the frac part is on the left edge
+		 */
+			pll_req = dc_fixpt_from_int(pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_int);
+		pll_req.value |= pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_frac;
+
+		/* multiply by REFCLK period */
+		pll_req = dc_fixpt_mul_int(pll_req, clk_mgr->dfs_ref_freq_khz);
+
+		return dc_fixpt_floor(pll_req);
+}
+
+static void dcn32_dump_clk_registers(struct clk_state_registers_and_bypass *regs_and_bypass,
+		struct clk_mgr *clk_mgr_base, struct clk_log_info *log_info)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	uint32_t dprefclk_did = 0;
+	uint32_t dcfclk_did = 0;
+	uint32_t dtbclk_did = 0;
+	uint32_t dispclk_did = 0;
+	uint32_t dppclk_did = 0;
+	uint32_t target_div = 0;
+
+	if (ASICREV_IS_GC_11_0_2(clk_mgr->base.ctx->asic_id.hw_internal_rev)) {
+		/* DFS Slice 0 is used for DISPCLK */
+		dispclk_did = REG_READ(CLK0_CLK0_DFS_CNTL);
+		/* DFS Slice 1 is used for DPPCLK */
+		dppclk_did = REG_READ(CLK0_CLK1_DFS_CNTL);
+		/* DFS Slice 2 is used for DPREFCLK */
+		dprefclk_did = REG_READ(CLK0_CLK2_DFS_CNTL);
+		/* DFS Slice 3 is used for DCFCLK */
+		dcfclk_did = REG_READ(CLK0_CLK3_DFS_CNTL);
+		/* DFS Slice 4 is used for DTBCLK */
+		dtbclk_did = REG_READ(CLK0_CLK4_DFS_CNTL);
+	} else {
+		/* DFS Slice 0 is used for DISPCLK */
+		dispclk_did = REG_READ(CLK1_CLK0_DFS_CNTL);
+		/* DFS Slice 1 is used for DPPCLK */
+		dppclk_did = REG_READ(CLK1_CLK1_DFS_CNTL);
+		/* DFS Slice 2 is used for DPREFCLK */
+		dprefclk_did = REG_READ(CLK1_CLK2_DFS_CNTL);
+		/* DFS Slice 3 is used for DCFCLK */
+		dcfclk_did = REG_READ(CLK1_CLK3_DFS_CNTL);
+		/* DFS Slice 4 is used for DTBCLK */
+		dtbclk_did = REG_READ(CLK1_CLK4_DFS_CNTL);
+	}
+
+	/* Convert DISPCLK DFS Slice DID to divider*/
+	target_div = dentist_get_divider_from_did(dispclk_did);
+	//Get dispclk in khz
+	regs_and_bypass->dispclk = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
+
+	/* Convert DISPCLK DFS Slice DID to divider*/
+	target_div = dentist_get_divider_from_did(dppclk_did);
+	//Get dppclk in khz
+	regs_and_bypass->dppclk = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
+
+	/* Convert DPREFCLK DFS Slice DID to divider*/
+	target_div = dentist_get_divider_from_did(dprefclk_did);
+	//Get dprefclk in khz
+	regs_and_bypass->dprefclk = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
+
+	/* Convert DCFCLK DFS Slice DID to divider*/
+	target_div = dentist_get_divider_from_did(dcfclk_did);
+	//Get dcfclk in khz
+	regs_and_bypass->dcfclk = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
+
+	/* Convert DTBCLK DFS Slice DID to divider*/
+	target_div = dentist_get_divider_from_did(dtbclk_did);
+	//Get dtbclk in khz
+	regs_and_bypass->dtbclk = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
+			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
+}
+
 static void dcn32_clock_read_ss_info(struct clk_mgr_internal *clk_mgr)
 {
 	struct dc_bios *bp = clk_mgr->base.ctx->dc_bios;
@@ -680,6 +770,7 @@ static bool dcn32_is_smu_present(struct clk_mgr *clk_mgr_base)
 static struct clk_mgr_funcs dcn32_funcs = {
 		.get_dp_ref_clk_frequency = dcn31_get_dtb_ref_freq_khz,
 		.update_clocks = dcn32_update_clocks,
+		.dump_clk_registers = dcn32_dump_clk_registers,
 		.init_clocks = dcn32_init_clocks,
 		.notify_wm_ranges = dcn32_notify_wm_ranges,
 		.set_hard_min_memclk = dcn32_set_hard_min_memclk,
@@ -730,7 +821,8 @@ void dcn32_clk_mgr_construct(
 	}
 
 	/* integer part is now VCO frequency in kHz */
-	clk_mgr->base.dentist_vco_freq_khz = 4300000;//dcn32_get_vco_frequency_from_reg(clk_mgr);
+	clk_mgr->base.dentist_vco_freq_khz = dcn32_get_vco_frequency_from_reg(clk_mgr);
+
 	/* in case we don't get a value from the register, use default */
 	if (clk_mgr->base.dentist_vco_freq_khz == 0)
 		clk_mgr->base.dentist_vco_freq_khz = 4300000; /* Updated as per HW docs */
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h b/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h
index 4dd461e6c14b..9ae9439c8f7b 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h
@@ -245,6 +245,9 @@ struct clk_mgr_funcs {
 
 	void (*init_clocks)(struct clk_mgr *clk_mgr);
 
+	void (*dump_clk_registers)(struct clk_state_registers_and_bypass *regs_and_bypass,
+			struct clk_mgr *clk_mgr_base, struct clk_log_info *log_info);
+
 	void (*enable_pme_wa) (struct clk_mgr *clk_mgr);
 	void (*get_clock)(struct clk_mgr *clk_mgr,
 			struct dc_state *context,
-- 
2.25.1

[PATCH 28/31] drm/amd/display: Implement a pme workaround function

[Rodrigo Siqueira]

From: Chaitanya Dhere <chaitanya.dhere@amd.com>

[Why]
For DCN32 we do not have a pme workaround function defined that sends a
BacoAudio message. Default code had uses the DCN30 function for pme
workaround. PMFW headers are inconsistent with their message ID
definitions which cause ID's to clash leading to inconsistent system
behaviour. There is a clash with FCLK message due to inconsitent PMFW
headers.

[How]
Implement a new BacoAudio function to workaround the problem of
inconsistent PMFW headers in order to avoid BacoAudio message clasing
with FCLK Enable message.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
---
 .../gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c  | 2 +-
 .../amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c  | 8 ++++++++
 .../amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h  | 1 +
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index e3abadeca0a6..b31adf5238d0 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -757,7 +757,7 @@ static void dcn32_enable_pme_wa(struct clk_mgr *clk_mgr_base)
 	if (!clk_mgr->smu_present)
 		return;
 
-	dcn30_smu_set_pme_workaround(clk_mgr);
+	dcn32_smu_set_pme_workaround(clk_mgr);
 }
 
 static bool dcn32_is_smu_present(struct clk_mgr *clk_mgr_base)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c
index d7c99e9179be..67ed8bf4510b 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c
@@ -115,6 +115,14 @@ void dcn32_smu_transfer_wm_table_dram_2_smu(struct clk_mgr_internal *clk_mgr)
 			DALSMC_MSG_TransferTableDram2Smu, TABLE_WATERMARKS, NULL);
 }
 
+void dcn32_smu_set_pme_workaround(struct clk_mgr_internal *clk_mgr)
+{
+	smu_print("SMU Set PME workaround\n");
+
+	dcn32_smu_send_msg_with_param(clk_mgr,
+		DALSMC_MSG_BacoAudioD3PME, 0, NULL);
+}
+
 /* Returns the actual frequency that was set in MHz, 0 on failure */
 unsigned int dcn32_smu_set_hard_min_by_freq(struct clk_mgr_internal *clk_mgr, uint32_t clk, uint16_t freq_mhz)
 {
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h
index 352435edbd79..a68038a41972 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h
@@ -39,6 +39,7 @@
 void
 dcn32_smu_send_fclk_pstate_message(struct clk_mgr_internal *clk_mgr, bool enable);
 void dcn32_smu_transfer_wm_table_dram_2_smu(struct clk_mgr_internal *clk_mgr);
+void dcn32_smu_set_pme_workaround(struct clk_mgr_internal *clk_mgr);
 void dcn32_smu_send_cab_for_uclk_message(struct clk_mgr_internal *clk_mgr, unsigned int num_ways);
 void dcn32_smu_transfer_wm_table_dram_2_smu(struct clk_mgr_internal *clk_mgr);
 unsigned int dcn32_smu_set_hard_min_by_freq(struct clk_mgr_internal *clk_mgr, uint32_t clk, uint16_t freq_mhz);
-- 
2.25.1

[PATCH 29/31] drm/amd/display: Update hook dcn32_funcs

[Rodrigo Siqueira]

In DCN32 clk hook functions, we are using the wrong reference for
get_dp_ref_clk_frequency and missing the get_dtb_ref_clk_frequency
reference. This commit adds those references.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index b31adf5238d0..113f93b3d3b2 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -768,7 +768,8 @@ static bool dcn32_is_smu_present(struct clk_mgr *clk_mgr_base)
 
 
 static struct clk_mgr_funcs dcn32_funcs = {
-		.get_dp_ref_clk_frequency = dcn31_get_dtb_ref_freq_khz,
+		.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
+		.get_dtb_ref_clk_frequency = dcn31_get_dtb_ref_freq_khz,
 		.update_clocks = dcn32_update_clocks,
 		.dump_clk_registers = dcn32_dump_clk_registers,
 		.init_clocks = dcn32_init_clocks,
-- 
2.25.1

[PATCH 30/31] drm/amd/display: Drop duplicate define

[Rodrigo Siqueira]

We already have DALSMC_MSG_TransferTableDram2Smu in the file dalsmc.h;
for this reason, we don't need this definition in the smu msg file.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
---
 .../drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c    | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c
index 67ed8bf4510b..3137b987f0a0 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c
@@ -34,8 +34,6 @@
 #define mmDAL_ARG_REG  0x16273
 #define mmDAL_RESP_REG 0x16274
 
-#define DALSMC_MSG_TransferTableDram2Smu          0x8
-
 #define REG(reg_name) \
 	mm ## reg_name
 
-- 
2.25.1

[PATCH 31/31] drm/amd/display: 3.2.191

[Rodrigo Siqueira]

From: Aric Cyr <aric.cyr@amd.com>

This DC patchset brings improvements in multiple areas. In summary, we
highlight:

- Remove unnecessary code;
- Small fixes (compilation warnings, typos, etc);
- Improvements in the DPMS code;
- Fix eDP issues
- Improvements in the MST code

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 81e308d59a97..8292f27c1516 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -47,7 +47,7 @@ struct aux_payload;
 struct set_config_cmd_payload;
 struct dmub_notification;
 
-#define DC_VER "3.2.190"
+#define DC_VER "3.2.191"
 
 #define MAX_SURFACES 3
 #define MAX_PLANES 6
-- 
2.25.1

RE: [PATCH 00/31] DC Patches June 17, 2022

[Wheeler, Daniel]

[Public]

Hi all,
 
This week this patchset was tested on the following systems:
 
HP Envy 360, with Ryzen 5 4500U
Lenovo Thinkpad T14s Gen2, with AMD Ryzen 5 5650U 
Sapphire Pulse RX5700XT 
Reference AMD RX6800
Engineering board with Ryzen 9 5900H
 
These systems were tested on the following display types: 
eDP, (1080p 60hz [4500U, 5650U, 5900H])
VGA and DVI (1680x1050 60HZ [DP to VGA/DVI, USB-C to DVI/VGA])
DP/HDMI/USB-C (1440p 170hz, 4k 60hz, 4k 144hz [Includes USB-C to DP/HDMI adapters])
 
MST tested with Startech MST14DP123DP and 2x 4k 60Hz displays
DSC tested with Cable Matters 101075 (DP to 3x DP), and 201375 (USB-C to 3x DP) with 3x 4k60 displays
 
The testing is a mix of automated and manual tests. Manual testing includes (but is not limited to):
Changing display configurations and settings
Benchmark testing
Feature testing (Freesync, etc.)
 
Automated testing includes (but is not limited to):
Script testing (scripts to automate some of the manual checks)
IGT testing
 
The patchset consists of the amd-staging-drm-next branch (Head commit - daa21bfa14f16caef5b7d8f8938a1334c620aaf1) with new patches added on top of it. This branch is used for both Ubuntu and Chrome OS testing (ChromeOS on a bi-weekly basis).

 
Tested on Ubuntu 22.04
 
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
 
 
Thank you,
 
Dan Wheeler
Technologist | AMD
SW Display
------------------------------------------------------------------------------------------------------------------
1 Commerce Valley Dr E, Thornhill, ON L3T 7X6
amd.com

-----Original Message-----
From: amd-gfx <amd-gfx-bounces@lists.freedesktop.org> On Behalf Of Rodrigo Siqueira
Sent: June 17, 2022 3:35 PM
To: amd-gfx@lists.freedesktop.org
Cc: Wang, Chao-kai (Stylon) <Stylon.Wang@amd.com>; Li, Sun peng (Leo) <Sunpeng.Li@amd.com>; Wentland, Harry <Harry.Wentland@amd.com>; Zhuo, Qingqing (Lillian) <Qingqing.Zhuo@amd.com>; Siqueira, Rodrigo <Rodrigo.Siqueira@amd.com>; Li, Roman <Roman.Li@amd.com>; Chiu, Solomon <Solomon.Chiu@amd.com>; Zuo, Jerry <Jerry.Zuo@amd.com>; Pillai, Aurabindo <Aurabindo.Pillai@amd.com>; Mahfooz, Hamza <Hamza.Mahfooz@amd.com>; Lin, Wayne <Wayne.Lin@amd.com>; Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>; Gutierrez, Agustin <Agustin.Gutierrez@amd.com>; Kotarac, Pavle <Pavle.Kotarac@amd.com>
Subject: [PATCH 00/31] DC Patches June 17, 2022

This DC patchset brings improvements in multiple areas. In summary, we
have:

- Remove unnecessary code;
- Small fixes (compilation warnings, typos, etc);
- Improvements in the DPMS code;
- Fix eDP issues;
- Improvements in the MST code.

Thanks
Siqueira

Alvin Lee (2):
  drm/amd/display: Update DPPCLK programming sequence
  drm/amd/display: Update SW state correctly for FCLK

Aric Cyr (2):
  drm/amd/display: Change initializer to single brace
  drm/amd/display: 3.2.191

Chaitanya Dhere (1):
  drm/amd/display: Implement a pme workaround function

Cruise Hung (1):
  drm/amd/display: Remove compiler warning

Dmytro Laktyushkin (1):
  drm/amd/display: Fix in dp link-training when updating payload
    allocation table

George Shen (5):
  drm/amd/display: Fix in overriding DP drive settings
  drm/amd/display: Fix typo in override_lane_settings
  drm/amd/display: Handle downstream LTTPR with fixed VS sequence
  drm/amd/display: Remove unused vendor specific w/a
  drm/amd/display: Fix divide-by-zero in DPPCLK and DISPCLK calculation

Ian Chen (1):
  drm/amd/display: Drop unnecessary detect link code

JinZe.Xu (1):
  drm/amd/display: Change HDMI judgement condition.

Nicholas Choi (1):
  drm/amd/display: refactor function transmitter_to_phy_id

Qingqing Zhuo (1):
  drm/amd/display: Fix DC warning at driver load

Rodrigo Siqueira (4):
  drm/amd/display: Check minimum disp_clk and dpp_clk debug option
  drm/amd/display: Get VCO frequency from registers
  drm/amd/display: Update hook dcn32_funcs
  drm/amd/display: Drop duplicate define

Saaem Rizvi (1):
  drm/amd/display: Add SMU logging code

Sung Joon Kim (2):
  drm/amd/display: Fix eDP not light up on resume
  drm/amd/display: Turn off internal backlight when plugging external
    monitor

Wayne Lin (4):
  drm/amd/display: Revert "drm/amd/display: Add flag to detect dpms
    force off during HPD"
  drm/amd/display: Revert "drm/amd/display: turn DPMS off on connector
    unplug"
  drm/amd/display: Release remote dc_sink under mst scenario
  drm/amd/display: Take emulated dc_sink into account for HDCP

Wenjing Liu (3):
  drm/amd/display: Enrich the log in MST payload update
  drm/amd/display: rename lane_settings to hw_lane_settings
  drm/amd/display: extract update stream allocation to link_hwss

hersen wu (1):
  drm/amd/display: add mst port output bw check

 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  57 +----
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |   5 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c |   8 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_hdcp.c    |   1 +
 .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c |  18 +-
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   |  70 +++++-
 .../display/amdgpu_dm/amdgpu_dm_mst_types.h   |   4 +
 .../dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c   |  12 +
 .../display/dc/clk_mgr/dcn301/dcn301_smu.c    |  12 +
 .../amd/display/dc/clk_mgr/dcn31/dcn31_smu.c  |   8 +
 .../dc/clk_mgr/dcn315/dcn315_clk_mgr.c        |   2 +-
 .../display/dc/clk_mgr/dcn315/dcn315_smu.c    |   8 +
 .../display/dc/clk_mgr/dcn316/dcn316_smu.c    |   8 +
 .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c  | 151 +++++++++++-  .../dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c  |  10 +-
 .../dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h  |   1 +
 drivers/gpu/drm/amd/display/dc/core/dc.c      |  13 -
 drivers/gpu/drm/amd/display/dc/core/dc_link.c |  43 ++--  .../gpu/drm/amd/display/dc/core/dc_link_dp.c  | 222 ++++++------------
 .../drm/amd/display/dc/core/dc_link_dpia.c    |  38 +--
 drivers/gpu/drm/amd/display/dc/dc.h           |   6 +-
 drivers/gpu/drm/amd/display/dc/dc_stream.h    |   1 -
 .../drm/amd/display/dc/dcn31/dcn31_resource.c |   1 -
 .../gpu/drm/amd/display/dc/inc/hw/clk_mgr.h   |   3 +
 .../gpu/drm/amd/display/dc/inc/link_hwss.h    |   6 +-
 .../gpu/drm/amd/display/include/fixed31_32.h  |   2 +-
 .../amd/display/include/link_service_types.h  |   1 -
 27 files changed, 421 insertions(+), 290 deletions(-)

--
2.25.1