Linux on Apple ARM platform development
 help / color / mirror / Atom feed
From: Nick Chan <towinchenmi@gmail.com>
To: Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Nick Chan <towinchenmi@gmail.com>
Subject: [PATCH RESEND 5/9] arm64: dts: apple: s8001: Add cpufreq nodes
Date: Mon,  3 Feb 2025 20:43:44 +0800	[thread overview]
Message-ID: <20250203124747.41541-6-towinchenmi@gmail.com> (raw)
In-Reply-To: <20250203124747.41541-1-towinchenmi@gmail.com>

Add cpufreq nodes for Apple A9X SoC.

Signed-off-by: Nick Chan <towinchenmi@gmail.com>
---
 arch/arm64/boot/dts/apple/s8001.dtsi | 59 ++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
index 23ee3238844d..7f7cb8afd3d3 100644
--- a/arch/arm64/boot/dts/apple/s8001.dtsi
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -32,6 +32,8 @@ cpu0: cpu@0 {
 			compatible = "apple,twister";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
 		};
@@ -40,11 +42,62 @@ cpu1: cpu@1 {
 			compatible = "apple,twister";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
 		};
 	};
 
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <53000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-level = <3>;
+			clock-latency-ns = <18000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-level = <4>;
+			clock-latency-ns = <21000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-level = <5>;
+			clock-latency-ns = <25000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <6>;
+			clock-latency-ns = <33000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <7>;
+			clock-latency-ns = <45000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+			turbo-mode;
+		};
+#endif
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -52,6 +105,12 @@ soc {
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0c0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0c0000 0x0 0x4000>;
-- 
2.48.1


  parent reply	other threads:[~2025-02-03 12:48 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-03 12:43 [PATCH RESEND 0/9] Add Apple A7-A11, T2 SoC cpufreq nodes Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 1/9] arm64: dts: apple: s5l8960x: Add " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 2/9] arm64: dts: apple: t7000: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 3/9] arm64: dts: apple: t7001: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 4/9] arm64: dts: apple: Add cpufreq nodes for S8000/S8003 Nick Chan
2025-02-03 12:43 ` Nick Chan [this message]
2025-02-03 12:43 ` [PATCH RESEND 6/9] arm64: dts: apple: t8010: Add cpufreq nodes Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 7/9] arm64: dts: apple: t8011: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 8/9] arm64: dts: apple: t8012: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 9/9] arm64: dts: apple: t8015: " Nick Chan
2025-02-06 23:27 ` [PATCH RESEND 0/9] Add Apple A7-A11, T2 SoC " Hector Martin
2025-02-09 10:51 ` Neal Gompa
2025-02-09 12:08 ` Sven Peter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250203124747.41541-6-towinchenmi@gmail.com \
    --to=towinchenmi@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=robh@kernel.org \
    --cc=sven@svenpeter.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox