From: Nick Chan <towinchenmi@gmail.com>
To: Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Nick Chan <towinchenmi@gmail.com>
Subject: [PATCH RESEND 6/9] arm64: dts: apple: t8010: Add cpufreq nodes
Date: Mon, 3 Feb 2025 20:43:45 +0800 [thread overview]
Message-ID: <20250203124747.41541-7-towinchenmi@gmail.com> (raw)
In-Reply-To: <20250203124747.41541-1-towinchenmi@gmail.com>
Add cpufreq nodes for Apple A10 SoC. There is a transparent hardware
big.LITTLE switcher in this SoC. Spoof E-core p-state frequencies such
that CPU capacity does not appear to change when switching between core
types.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
---
arch/arm64/boot/dts/apple/t8010-7.dtsi | 8 ++
arch/arm64/boot/dts/apple/t8010-ipad6.dtsi | 8 ++
arch/arm64/boot/dts/apple/t8010.dtsi | 86 ++++++++++++++++++++++
3 files changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/apple/t8010-7.dtsi b/arch/arm64/boot/dts/apple/t8010-7.dtsi
index 1332fd73f50f..919e067ef073 100644
--- a/arch/arm64/boot/dts/apple/t8010-7.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010-7.dtsi
@@ -41,3 +41,11 @@ switch-mute {
};
};
};
+
+&hurricane_opp09 {
+ status = "okay";
+};
+
+&hurricane_opp10 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
index 81696c6e302c..4ea8cf12e430 100644
--- a/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
@@ -42,3 +42,11 @@ button-volup {
};
};
};
+
+&hurricane_opp09 {
+ status = "okay";
+};
+
+&hurricane_opp10 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010.dtsi b/arch/arm64/boot/dts/apple/t8010.dtsi
index e3d6a8354103..2547e8c60cad 100644
--- a/arch/arm64/boot/dts/apple/t8010.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -32,6 +32,8 @@ cpu0: cpu@0 {
compatible = "apple,hurricane-zephyr";
reg = <0x0 0x0>;
cpu-release-addr = <0 0>; /* To be filled by loader */
+ operating-points-v2 = <&fusion_opp>;
+ performance-domains = <&cpufreq>;
enable-method = "spin-table";
device_type = "cpu";
};
@@ -40,11 +42,89 @@ cpu1: cpu@1 {
compatible = "apple,hurricane-zephyr";
reg = <0x0 0x1>;
cpu-release-addr = <0 0>; /* To be filled by loader */
+ operating-points-v2 = <&fusion_opp>;
+ performance-domains = <&cpufreq>;
enable-method = "spin-table";
device_type = "cpu";
};
};
+ fusion_opp: opp-table {
+ compatible = "operating-points-v2";
+
+ /*
+ * Apple Fusion Architecture: Hardware big.LITTLE switcher
+ * that use p-state transitions to switch between cores.
+ * Only one type of core can be active at a given time.
+ *
+ * The E-core frequencies are adjusted so performance scales
+ * linearly with reported clock speed.
+ */
+
+ opp01 {
+ opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+ opp-level = <1>;
+ clock-latency-ns = <11000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+ opp-level = <2>;
+ clock-latency-ns = <49000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+ opp-level = <3>;
+ clock-latency-ns = <13000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+ opp-level = <4>;
+ clock-latency-ns = <18000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <756000000>;
+ opp-level = <5>;
+ clock-latency-ns = <35000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-level = <6>;
+ clock-latency-ns = <31000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1356000000>;
+ opp-level = <7>;
+ clock-latency-ns = <37000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <1644000000>;
+ opp-level = <8>;
+ clock-latency-ns = <39500>;
+ };
+ hurricane_opp09: opp09 {
+ opp-hz = /bits/ 64 <1944000000>;
+ opp-level = <9>;
+ clock-latency-ns = <46000>;
+ status = "disabled"; /* Not available on N112 */
+ };
+ hurricane_opp10: opp10 {
+ opp-hz = /bits/ 64 <2244000000>;
+ opp-level = <10>;
+ clock-latency-ns = <56000>;
+ status = "disabled"; /* Not available on N112 */
+ };
+#if 0
+ /* Not available until CPU deep sleep is implemented */
+ hurricane_opp11: opp11 {
+ opp-hz = /bits/ 64 <2340000000>;
+ opp-level = <11>;
+ clock-latency-ns = <56000>;
+ turbo-mode;
+ status = "disabled"; /* Not available on N112 */
+ };
+#endif
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -52,6 +132,12 @@ soc {
nonposted-mmio;
ranges;
+ cpufreq: performance-controller@202f20000 {
+ compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+ reg = <0x2 0x02f20000 0 0x1000>;
+ #performance-domain-cells = <0>;
+ };
+
serial0: serial@20a0c0000 {
compatible = "apple,s5l-uart";
reg = <0x2 0x0a0c0000 0x0 0x4000>;
--
2.48.1
next prev parent reply other threads:[~2025-02-03 12:48 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-03 12:43 [PATCH RESEND 0/9] Add Apple A7-A11, T2 SoC cpufreq nodes Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 1/9] arm64: dts: apple: s5l8960x: Add " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 2/9] arm64: dts: apple: t7000: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 3/9] arm64: dts: apple: t7001: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 4/9] arm64: dts: apple: Add cpufreq nodes for S8000/S8003 Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 5/9] arm64: dts: apple: s8001: Add cpufreq nodes Nick Chan
2025-02-03 12:43 ` Nick Chan [this message]
2025-02-03 12:43 ` [PATCH RESEND 7/9] arm64: dts: apple: t8011: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 8/9] arm64: dts: apple: t8012: " Nick Chan
2025-02-03 12:43 ` [PATCH RESEND 9/9] arm64: dts: apple: t8015: " Nick Chan
2025-02-06 23:27 ` [PATCH RESEND 0/9] Add Apple A7-A11, T2 SoC " Hector Martin
2025-02-09 10:51 ` Neal Gompa
2025-02-09 12:08 ` Sven Peter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250203124747.41541-7-towinchenmi@gmail.com \
--to=towinchenmi@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=robh@kernel.org \
--cc=sven@svenpeter.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox