[PATCH v5 0/5] Driver for pre-DCP apple display controller.

[PATCH v5 0/5] Driver for pre-DCP apple display controller.

[Sasha Finkelstein via B4 Relay]

Hi.

This patch series adds support for a secondary display controller
present on Apple M1/M2 chips and used to drive the display of the
"touchbar" touch panel present on those. 

Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
Changes in v5:
- Moved to using the component framework.
- Other lifetime fixes
- Link to v4: https://lore.kernel.org/r/20250114-adpdrm-v4-0-e9b5260a39f1@gmail.com

Changes in v4:
- Fixed dt bindings.
- Link to v3: https://lore.kernel.org/r/20250112-adpdrm-v3-0-c674dc19fa7f@gmail.com

Changes in v3:
- Fixed building as module after splitting out mipi block
- Addressing the review feedback.
- Link to v2: https://lore.kernel.org/r/20241126-adpdrm-v2-0-c90485336c09@gmail.com

Changes in v2:
- Addressing the review feedback.
- Split out the mipi part of the display controller into a separate device
- Link to v1: https://lore.kernel.org/r/20241124-adpdrm-v1-0-3191d8e6e49a@gmail.com

---
Sasha Finkelstein (5):
      dt-bindings: display: Add Apple pre-DCP display controller
      drm: adp: Add Apple Display Pipe driver
      drm: panel: Add a panel driver for the Summit display
      arm64: dts: apple: Add touchbar screen nodes
      MAINTAINERS: Add entries for touchbar display driver

 .../display/apple,h7-display-pipe-mipi.yaml        |  83 +++
 .../bindings/display/apple,h7-display-pipe.yaml    |  88 +++
 .../bindings/display/panel/apple,summit.yaml       |  58 ++
 MAINTAINERS                                        |   5 +
 arch/arm64/boot/dts/apple/t8103-j293.dts           |  31 ++
 arch/arm64/boot/dts/apple/t8103.dtsi               |  61 ++
 arch/arm64/boot/dts/apple/t8112-j493.dts           |  31 ++
 arch/arm64/boot/dts/apple/t8112.dtsi               |  61 ++
 drivers/gpu/drm/Kconfig                            |   2 +
 drivers/gpu/drm/Makefile                           |   1 +
 drivers/gpu/drm/adp/Kconfig                        |  17 +
 drivers/gpu/drm/adp/Makefile                       |   5 +
 drivers/gpu/drm/adp/adp-mipi.c                     | 276 +++++++++
 drivers/gpu/drm/adp/adp_drv.c                      | 617 +++++++++++++++++++++
 drivers/gpu/drm/panel/Kconfig                      |   9 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-summit.c               | 132 +++++
 17 files changed, 1478 insertions(+)
---
base-commit: b62cef9a5c673f1b8083159f5dc03c1c5daced2f
change-id: 20241124-adpdrm-25fce3dd8a71

[PATCH v5 1/5] dt-bindings: display: Add Apple pre-DCP display controller

[Sasha Finkelstein via B4 Relay]

From: Sasha Finkelstein <fnkl.kernel@gmail.com>

Add bindings for a secondary display controller present on certain
Apple laptops.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 .../display/apple,h7-display-pipe-mipi.yaml        | 83 ++++++++++++++++++++
 .../bindings/display/apple,h7-display-pipe.yaml    | 88 ++++++++++++++++++++++
 .../bindings/display/panel/apple,summit.yaml       | 58 ++++++++++++++
 3 files changed, 229 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml b/Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..5e6da66499a508c001670f68fa00d6bab13591d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/apple,h7-display-pipe-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple pre-DCP display controller MIPI interface
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  The MIPI controller part of the pre-DCP Apple display controller
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-display-pipe-mipi
+          - apple,t8103-display-pipe-mipi
+      - const: apple,h7-display-pipe-mipi
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port. Always connected to the primary controller
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output MIPI DSI port to the panel
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@28200000 {
+        compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+        reg = <0x28200000 0xc000>;
+        power-domains = <&ps_dispdfr_mipi>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dfr_adp_out_mipi: endpoint {
+                    remote-endpoint = <&dfr_adp_out_mipi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dfr_panel_in: endpoint {
+                    remote-endpoint = <&dfr_mipi_out_panel>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml b/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..102fb1804c0c0b84f590e507ca2d526948e98f68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/apple,h7-display-pipe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple pre-DCP display controller
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  A secondary display controller used to drive the "touchbar" on
+  certain Apple laptops.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-display-pipe
+          - apple,t8103-display-pipe
+      - const: apple,h7-display-pipe
+
+  reg:
+    items:
+      - description: Primary register block, controls planes and blending
+      - description:
+          Contains other configuration registers like interrupt
+          and FIFO control
+
+  reg-names:
+    items:
+      - const: be
+      - const: fe
+
+  power-domains:
+    description:
+      Phandles to pmgr entries that are needed for this controller to turn on.
+      Aside from that, their specific functions are unknown
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Unknown function
+      - description: Primary interrupt. Vsync events are reported via it
+
+  interrupt-names:
+    items:
+      - const: be
+      - const: fe
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Output port. Always connected to apple,h7-display-pipe-mipi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    display-pipe@28200000 {
+        compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+        reg = <0x28200000 0xc000>,
+              <0x28400000 0x4000>;
+        reg-names = "be", "fe";
+        power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "be", "fe";
+        iommus = <&displaydfr_dart 0>;
+
+        port {
+            dfr_adp_out_mipi: endpoint {
+                remote-endpoint = <&dfr_mipi_in_adp>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/apple,summit.yaml b/Documentation/devicetree/bindings/display/panel/apple,summit.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..f081755325e97ad58b831893b84082cc10f8d5e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/apple,summit.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/apple,summit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple "Summit" display panel
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  An OLED panel used as a touchbar on certain Apple laptops.
+  Contains a backlight device, which controls brightness of the panel itself.
+  The backlight common properties are included for this reason
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/leds/backlight/common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,j293-summit
+          - apple,j493-summit
+      - const: apple,summit
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - max-brightness
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "apple,j293-summit", "apple,summit";
+            reg = <0>;
+            max-brightness = <255>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dfr_bridge_out>;
+                };
+            };
+        };
+    };
+...

-- 
2.48.1

[PATCH v5 2/5] drm: adp: Add Apple Display Pipe driver

[Sasha Finkelstein via B4 Relay]

From: Sasha Finkelstein <fnkl.kernel@gmail.com>

This display controller is present on M-series chips and is used
to drive the touchbar display.

Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 drivers/gpu/drm/Kconfig        |   2 +
 drivers/gpu/drm/Makefile       |   1 +
 drivers/gpu/drm/adp/Kconfig    |  17 ++
 drivers/gpu/drm/adp/Makefile   |   5 +
 drivers/gpu/drm/adp/adp-mipi.c | 276 ++++++++++++++++++
 drivers/gpu/drm/adp/adp_drv.c  | 617 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 918 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 772fc7625639de07de873afa0e5e0c37bf4f4420..bba7a9c1f1d213c9cf0418a388646da7a8504f4f 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -503,6 +503,8 @@ source "drivers/gpu/drm/mcde/Kconfig"
 
 source "drivers/gpu/drm/tidss/Kconfig"
 
+source "drivers/gpu/drm/adp/Kconfig"
+
 source "drivers/gpu/drm/xlnx/Kconfig"
 
 source "drivers/gpu/drm/gud/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 463afad1b5ca6275e61223adc8ca036c3d4d6b03..acd8d8943ef2bf85c80db7c218c59a7ec2df56da 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -213,6 +213,7 @@ obj-y			+= mxsfb/
 obj-y			+= tiny/
 obj-$(CONFIG_DRM_PL111) += pl111/
 obj-$(CONFIG_DRM_TVE200) += tve200/
+obj-$(CONFIG_DRM_ADP) += adp/
 obj-$(CONFIG_DRM_XEN) += xen/
 obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
 obj-$(CONFIG_DRM_LIMA)  += lima/
diff --git a/drivers/gpu/drm/adp/Kconfig b/drivers/gpu/drm/adp/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..9fcc27eb200dbc5c3005d732b937b45e2dde66ac
--- /dev/null
+++ b/drivers/gpu/drm/adp/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only OR MIT
+config DRM_ADP
+	tristate "DRM Support for pre-DCP Apple display controllers"
+	depends on DRM && OF && ARM64
+	depends on ARCH_APPLE || COMPILE_TEST
+	select DRM_KMS_HELPER
+	select DRM_BRIDGE_CONNECTOR
+	select DRM_DISPLAY_HELPER
+	select DRM_KMS_DMA_HELPER
+	select DRM_GEM_DMA_HELPER
+	select DRM_PANEL_BRIDGE
+	select VIDEOMODE_HELPERS
+	select DRM_MIPI_DSI
+	help
+	  Chose this option if you have an Apple Arm laptop with a touchbar.
+
+	  If M is selected, this module will be called adpdrm.
diff --git a/drivers/gpu/drm/adp/Makefile b/drivers/gpu/drm/adp/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..8e7b618edd35591ce9b480a8fd3819cce41557f5
--- /dev/null
+++ b/drivers/gpu/drm/adp/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+adpdrm-y := adp_drv.o
+adpdrm-mipi-y := adp-mipi.o
+obj-$(CONFIG_DRM_ADP) += adpdrm.o adpdrm-mipi.o
diff --git a/drivers/gpu/drm/adp/adp-mipi.c b/drivers/gpu/drm/adp/adp-mipi.c
new file mode 100644
index 0000000000000000000000000000000000000000..ad80542b60ed6de3fe76a4d134b87d20df98ee33
--- /dev/null
+++ b/drivers/gpu/drm/adp/adp-mipi.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/component.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_mipi_dsi.h>
+
+#define DSI_GEN_HDR 0x6c
+#define DSI_GEN_PLD_DATA 0x70
+
+#define DSI_CMD_PKT_STATUS 0x74
+
+#define GEN_PLD_R_EMPTY BIT(4)
+#define GEN_PLD_W_FULL BIT(3)
+#define GEN_PLD_W_EMPTY BIT(2)
+#define GEN_CMD_FULL BIT(1)
+#define GEN_CMD_EMPTY BIT(0)
+#define GEN_RD_CMD_BUSY BIT(6)
+#define CMD_PKT_STATUS_TIMEOUT_US 20000
+
+struct adp_mipi_drv_private {
+	struct mipi_dsi_host dsi;
+	struct drm_bridge bridge;
+	struct drm_bridge *next_bridge;
+	void __iomem *mipi;
+};
+
+#define mipi_to_adp(x) container_of(x, struct adp_mipi_drv_private, dsi)
+
+static int adp_dsi_gen_pkt_hdr_write(struct adp_mipi_drv_private *adp, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL), 1000,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(adp->dsi.dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	writel(hdr_val, adp->mipi + DSI_GEN_HDR);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(adp->dsi.dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adp_dsi_write(struct adp_mipi_drv_private *adp,
+			 const struct mipi_dsi_packet *packet)
+{
+	const u8 *tx_buf = packet->payload;
+	int len = packet->payload_length, pld_data_bytes = sizeof(u32), ret;
+	__le32 word;
+	u32 val;
+
+	while (len) {
+		if (len < pld_data_bytes) {
+			word = 0;
+			memcpy(&word, tx_buf, len);
+			writel(le32_to_cpu(word), adp->mipi + DSI_GEN_PLD_DATA);
+			len = 0;
+		} else {
+			memcpy(&word, tx_buf, pld_data_bytes);
+			writel(le32_to_cpu(word), adp->mipi + DSI_GEN_PLD_DATA);
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL), 1000,
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(adp->dsi.dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	word = 0;
+	memcpy(&word, packet->header, sizeof(packet->header));
+	return adp_dsi_gen_pkt_hdr_write(adp, le32_to_cpu(word));
+}
+
+static int adp_dsi_read(struct adp_mipi_drv_private *adp,
+			const struct mipi_dsi_msg *msg)
+{
+	int i, j, ret, len = msg->rx_len;
+	u8 *buf = msg->rx_buf;
+	u32 val;
+
+	/* Wait end of the read operation */
+	ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_RD_CMD_BUSY),
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(adp->dsi.dev, "Timeout during read operation\n");
+		return ret;
+	}
+
+	for (i = 0; i < len; i += 4) {
+		/* Read fifo must not be empty before all bytes are read */
+		ret = readl_poll_timeout(adp->mipi + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_R_EMPTY),
+					 1000, CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(adp->dsi.dev, "Read payload FIFO is empty\n");
+			return ret;
+		}
+
+		val = readl(adp->mipi + DSI_GEN_PLD_DATA);
+		for (j = 0; j < 4 && j + i < len; j++)
+			buf[i + j] = val >> (8 * j);
+	}
+
+	return ret;
+}
+
+static ssize_t adp_dsi_host_transfer(struct mipi_dsi_host *host,
+				     const struct mipi_dsi_msg *msg)
+{
+	struct adp_mipi_drv_private *adp = mipi_to_adp(host);
+	struct mipi_dsi_packet packet;
+	int ret, nb_bytes;
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret) {
+		dev_err(adp->dsi.dev, "failed to create packet: %d\n", ret);
+		return ret;
+	}
+
+	ret = adp_dsi_write(adp, &packet);
+	if (ret)
+		return ret;
+
+	if (msg->rx_buf && msg->rx_len) {
+		ret = adp_dsi_read(adp, msg);
+		if (ret)
+			return ret;
+		nb_bytes = msg->rx_len;
+	} else {
+		nb_bytes = packet.size;
+	}
+
+	return nb_bytes;
+}
+
+static int adp_dsi_bind(struct device *dev, struct device *master, void *data)
+{
+	return 0;
+}
+
+static void adp_dsi_unbind(struct device *dev, struct device *master, void *data)
+{
+}
+
+static const struct component_ops adp_dsi_component_ops = {
+	.bind	= adp_dsi_bind,
+	.unbind	= adp_dsi_unbind,
+};
+
+static int adp_dsi_host_attach(struct mipi_dsi_host *host,
+			       struct mipi_dsi_device *dev)
+{
+	struct adp_mipi_drv_private *adp = mipi_to_adp(host);
+	struct drm_bridge *next;
+	int ret;
+
+	next = devm_drm_of_get_bridge(adp->dsi.dev, adp->dsi.dev->of_node, 1, 0);
+	if (IS_ERR(next))
+		return PTR_ERR(next);
+
+	adp->next_bridge = next;
+
+	drm_bridge_add(&adp->bridge);
+
+	ret = component_add(host->dev, &adp_dsi_component_ops);
+	if (ret) {
+		pr_err("failed to add dsi_host component: %d\n", ret);
+		drm_bridge_remove(&adp->bridge);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adp_dsi_host_detach(struct mipi_dsi_host *host,
+			       struct mipi_dsi_device *dev)
+{
+	struct adp_mipi_drv_private *adp = mipi_to_adp(host);
+
+	component_del(host->dev, &adp_dsi_component_ops);
+	drm_bridge_remove(&adp->bridge);
+	return 0;
+}
+
+static const struct mipi_dsi_host_ops adp_dsi_host_ops = {
+	.transfer = adp_dsi_host_transfer,
+	.attach = adp_dsi_host_attach,
+	.detach = adp_dsi_host_detach,
+};
+
+static int adp_dsi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct adp_mipi_drv_private *adp =
+		container_of(bridge, struct adp_mipi_drv_private, bridge);
+
+	return drm_bridge_attach(bridge->encoder, adp->next_bridge, bridge, flags);
+}
+
+static const struct drm_bridge_funcs adp_dsi_bridge_funcs = {
+	.attach	= adp_dsi_bridge_attach,
+};
+
+static int adp_mipi_probe(struct platform_device *pdev)
+{
+	struct adp_mipi_drv_private *adp;
+
+	adp = devm_kzalloc(&pdev->dev, sizeof(*adp), GFP_KERNEL);
+	if (!adp)
+		return -ENOMEM;
+
+	adp->mipi = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(adp->mipi)) {
+		dev_err(&pdev->dev, "failed to map mipi mmio");
+		return PTR_ERR(adp->mipi);
+	}
+
+	adp->dsi.dev = &pdev->dev;
+	adp->dsi.ops = &adp_dsi_host_ops;
+	adp->bridge.funcs = &adp_dsi_bridge_funcs;
+	adp->bridge.of_node = pdev->dev.of_node;
+	adp->bridge.type = DRM_MODE_CONNECTOR_DSI;
+	dev_set_drvdata(&pdev->dev, adp);
+	return mipi_dsi_host_register(&adp->dsi);
+}
+
+static void adp_mipi_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adp_mipi_drv_private *adp = dev_get_drvdata(dev);
+
+	mipi_dsi_host_unregister(&adp->dsi);
+}
+
+static const struct of_device_id adp_mipi_of_match[] = {
+	{ .compatible = "apple,h7-display-pipe-mipi", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adp_mipi_of_match);
+
+static struct platform_driver adp_mipi_platform_driver = {
+	.driver = {
+		.name = "adp-mipi",
+		.of_match_table = adp_mipi_of_match,
+	},
+	.probe = adp_mipi_probe,
+	.remove = adp_mipi_remove,
+};
+
+module_platform_driver(adp_mipi_platform_driver);
+
+MODULE_DESCRIPTION("Apple Display Pipe MIPI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/adp/adp_drv.c b/drivers/gpu/drm/adp/adp_drv.c
new file mode 100644
index 0000000000000000000000000000000000000000..33fad8ee3331c681d1c10757e4dd17ba5f8f9904
--- /dev/null
+++ b/drivers/gpu/drm/adp/adp_drv.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/component.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#define ADP_INT_STATUS 0x34
+#define ADP_INT_STATUS_INT_MASK 0x7
+#define ADP_INT_STATUS_VBLANK 0x1
+#define ADP_CTRL 0x100
+#define ADP_CTRL_VBLANK_ON 0x12
+#define ADP_CTRL_FIFO_ON 0x601
+#define ADP_SCREEN_SIZE 0x0c
+#define ADP_SCREEN_HSIZE GENMASK(15, 0)
+#define ADP_SCREEN_VSIZE GENMASK(31, 16)
+
+#define ADBE_FIFO 0x10c0
+#define ADBE_FIFO_SYNC 0xc0000000
+
+#define ADBE_BLEND_BYPASS 0x2020
+#define ADBE_BLEND_EN1 0x2028
+#define ADBE_BLEND_EN2 0x2074
+#define ADBE_BLEND_EN3 0x202c
+#define ADBE_BLEND_EN4 0x2034
+#define ADBE_MASK_BUF 0x2200
+
+#define ADBE_SRC_START 0x4040
+#define ADBE_SRC_SIZE 0x4048
+#define ADBE_DST_START 0x4050
+#define ADBE_DST_SIZE 0x4054
+#define ADBE_STRIDE 0x4038
+#define ADBE_FB_BASE 0x4030
+
+#define ADBE_LAYER_EN1 0x4020
+#define ADBE_LAYER_EN2 0x4068
+#define ADBE_LAYER_EN3 0x40b4
+#define ADBE_LAYER_EN4 0x40f4
+#define ADBE_SCALE_CTL 0x40ac
+#define ADBE_SCALE_CTL_BYPASS 0x100000
+
+#define ADBE_LAYER_CTL 0x1038
+#define ADBE_LAYER_CTL_ENABLE 0x10000
+
+#define ADBE_PIX_FMT 0x402c
+#define ADBE_PIX_FMT_XRGB32 0x53e4001
+
+static int adp_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * The modesetting driver does not check the non-desktop connector
+	 * property and keeps the device open and locked. If the touchbar daemon
+	 * opens the device first modesetting breaks the whole X session.
+	 * Simply refuse to open the device for X11 server processes as
+	 * workaround.
+	 */
+	if (current->comm[0] == 'X')
+		return -EBUSY;
+
+	return drm_open(inode, filp);
+}
+
+static const struct file_operations adp_fops = {
+	.owner          = THIS_MODULE,
+	.open           = adp_open,
+	.release        = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+	.compat_ioctl   = drm_compat_ioctl,
+	.poll           = drm_poll,
+	.read           = drm_read,
+	.llseek         = noop_llseek,
+	.mmap           = drm_gem_mmap,
+	.fop_flags      = FOP_UNSIGNED_OFFSET,
+	DRM_GEM_DMA_UNMAPPED_AREA_FOPS
+};
+
+static int adp_drm_gem_dumb_create(struct drm_file *file_priv,
+					struct drm_device *drm,
+					struct drm_mode_create_dumb *args)
+{
+	args->height = ALIGN(args->height, 64);
+	args->size = args->pitch * args->height;
+
+	return drm_gem_dma_dumb_create_internal(file_priv, drm, args);
+}
+
+static const struct drm_driver adp_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops = &adp_fops,
+	DRM_GEM_DMA_DRIVER_OPS_VMAP_WITH_DUMB_CREATE(adp_drm_gem_dumb_create),
+	.name = "adp",
+	.desc = "Apple Display Pipe DRM Driver",
+	.date = "20230412",
+	.major = 0,
+	.minor = 1,
+};
+
+struct adp_drv_private {
+	struct drm_device drm;
+	struct drm_crtc crtc;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	struct drm_bridge *next_bridge;
+	void __iomem *be;
+	void __iomem *fe;
+	u32 *mask_buf;
+	u64 mask_buf_size;
+	dma_addr_t mask_iova;
+	int be_irq;
+	int fe_irq;
+	spinlock_t irq_lock;
+	struct drm_pending_vblank_event *event;
+};
+
+#define to_adp(x) container_of(x, struct adp_drv_private, drm)
+#define crtc_to_adp(x) container_of(x, struct adp_drv_private, crtc)
+
+static int adp_plane_atomic_check(struct drm_plane *plane,
+				    struct drm_atomic_state *state)
+{
+	struct drm_plane_state *new_plane_state;
+	struct drm_crtc_state *crtc_state;
+
+	new_plane_state = drm_atomic_get_new_plane_state(state, plane);
+
+	if (!new_plane_state->crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+
+	return drm_atomic_helper_check_plane_state(new_plane_state,
+						   crtc_state,
+						   DRM_PLANE_NO_SCALING,
+						   DRM_PLANE_NO_SCALING,
+						   true, true);
+}
+
+static void adp_plane_atomic_update(struct drm_plane *plane,
+				    struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp;
+	struct drm_rect src_rect;
+	struct drm_gem_dma_object *obj;
+	struct drm_framebuffer *fb;
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+	u32 src_pos, src_size, dst_pos, dst_size;
+
+	if (!plane || !new_state)
+		return;
+
+	fb = new_state->fb;
+	if (!fb)
+		return;
+	adp = to_adp(plane->dev);
+
+	drm_rect_fp_to_int(&src_rect, &new_state->src);
+	src_pos = src_rect.x1 << 16 | src_rect.y1;
+	dst_pos = new_state->dst.x1 << 16 | new_state->dst.y1;
+	src_size = drm_rect_width(&src_rect) << 16 | drm_rect_height(&src_rect);
+	dst_size = drm_rect_width(&new_state->dst) << 16 |
+		drm_rect_height(&new_state->dst);
+	writel(src_pos, adp->be + ADBE_SRC_START);
+	writel(src_size, adp->be + ADBE_SRC_SIZE);
+	writel(dst_pos, adp->be + ADBE_DST_START);
+	writel(dst_size, adp->be + ADBE_DST_SIZE);
+	writel(fb->pitches[0], adp->be + ADBE_STRIDE);
+	obj = drm_fb_dma_get_gem_obj(fb, 0);
+	if (obj)
+		writel(obj->dma_addr + fb->offsets[0], adp->be + ADBE_FB_BASE);
+
+	writel(BIT(0), adp->be + ADBE_LAYER_EN1);
+	writel(BIT(0), adp->be + ADBE_LAYER_EN2);
+	writel(BIT(0), adp->be + ADBE_LAYER_EN3);
+	writel(BIT(0), adp->be + ADBE_LAYER_EN4);
+	writel(ADBE_SCALE_CTL_BYPASS, adp->be + ADBE_SCALE_CTL);
+	writel(ADBE_LAYER_CTL_ENABLE | BIT(0), adp->be + ADBE_LAYER_CTL);
+	writel(ADBE_PIX_FMT_XRGB32, adp->be + ADBE_PIX_FMT);
+}
+
+static void adp_plane_atomic_disable(struct drm_plane *plane,
+				     struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp = to_adp(plane->dev);
+
+	writel(0x0, adp->be + ADBE_LAYER_EN1);
+	writel(0x0, adp->be + ADBE_LAYER_EN2);
+	writel(0x0, adp->be + ADBE_LAYER_EN3);
+	writel(0x0, adp->be + ADBE_LAYER_EN4);
+	writel(ADBE_LAYER_CTL_ENABLE, adp->be + ADBE_LAYER_CTL);
+}
+
+static const struct drm_plane_helper_funcs adp_plane_helper_funcs = {
+	.atomic_check = adp_plane_atomic_check,
+	.atomic_update = adp_plane_atomic_update,
+	.atomic_disable = adp_plane_atomic_disable,
+	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS
+};
+
+static const struct drm_plane_funcs adp_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	DRM_GEM_SHADOW_PLANE_FUNCS
+};
+
+static const u32 plane_formats[] = {
+	DRM_FORMAT_XRGB8888,
+};
+
+#define ALL_CRTCS 1
+
+static struct drm_plane *adp_plane_new(struct adp_drv_private *adp)
+{
+	struct drm_device *drm = &adp->drm;
+	struct drm_plane *plane;
+
+	plane = __drmm_universal_plane_alloc(drm, sizeof(struct drm_plane), 0,
+					     ALL_CRTCS, &adp_plane_funcs,
+					     plane_formats, ARRAY_SIZE(plane_formats),
+					     NULL, DRM_PLANE_TYPE_PRIMARY, "plane");
+	if (!plane) {
+		drm_err(drm, "failed to allocate plane");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	drm_plane_helper_add(plane, &adp_plane_helper_funcs);
+	return plane;
+}
+
+static void adp_enable_vblank(struct adp_drv_private *adp)
+{
+	u32 cur_ctrl;
+
+	writel(ADP_INT_STATUS_INT_MASK, adp->fe + ADP_INT_STATUS);
+
+	cur_ctrl = readl(adp->fe + ADP_CTRL);
+	writel(cur_ctrl | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
+}
+
+static int adp_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct adp_drv_private *adp = to_adp(dev);
+
+	adp_enable_vblank(adp);
+
+	return 0;
+}
+
+static void adp_disable_vblank(struct adp_drv_private *adp)
+{
+	u32 cur_ctrl;
+
+	cur_ctrl = readl(adp->fe + ADP_CTRL);
+	writel(cur_ctrl & ~ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
+	writel(ADP_INT_STATUS_INT_MASK, adp->fe + ADP_INT_STATUS);
+}
+
+static void adp_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct adp_drv_private *adp = to_adp(dev);
+
+	adp_disable_vblank(adp);
+}
+
+static void adp_crtc_atomic_enable(struct drm_crtc *crtc,
+				   struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp = crtc_to_adp(crtc);
+
+	writel(BIT(0), adp->be + ADBE_BLEND_EN2);
+	writel(BIT(4), adp->be + ADBE_BLEND_EN1);
+	writel(BIT(0), adp->be + ADBE_BLEND_EN3);
+	writel(BIT(0), adp->be + ADBE_BLEND_BYPASS);
+	writel(BIT(0), adp->be + ADBE_BLEND_EN4);
+}
+
+static void adp_crtc_atomic_disable(struct drm_crtc *crtc,
+				    struct drm_atomic_state *state)
+{
+	struct adp_drv_private *adp = crtc_to_adp(crtc);
+	struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	drm_atomic_helper_disable_planes_on_crtc(old_state, false);
+
+	writel(0x0, adp->be + ADBE_BLEND_EN2);
+	writel(0x0, adp->be + ADBE_BLEND_EN1);
+	writel(0x0, adp->be + ADBE_BLEND_EN3);
+	writel(0x0, adp->be + ADBE_BLEND_BYPASS);
+	writel(0x0, adp->be + ADBE_BLEND_EN4);
+	drm_crtc_vblank_off(crtc);
+}
+
+static void adp_crtc_atomic_flush(struct drm_crtc *crtc,
+				  struct drm_atomic_state *state)
+{
+	u32 frame_num = 1;
+	struct adp_drv_private *adp = crtc_to_adp(crtc);
+	struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
+	u64 new_size = ALIGN(new_state->mode.hdisplay *
+			     new_state->mode.vdisplay * 4, PAGE_SIZE);
+
+	if (new_size != adp->mask_buf_size) {
+		if (adp->mask_buf)
+			dma_free_coherent(crtc->dev->dev, adp->mask_buf_size,
+					  adp->mask_buf, adp->mask_iova);
+		adp->mask_buf = NULL;
+		if (new_size != 0) {
+			adp->mask_buf = dma_alloc_coherent(crtc->dev->dev, new_size,
+							   &adp->mask_iova, GFP_KERNEL);
+			memset(adp->mask_buf, 0xFF, new_size);
+			writel(adp->mask_iova, adp->be + ADBE_MASK_BUF);
+		}
+		adp->mask_buf_size = new_size;
+	}
+	writel(ADBE_FIFO_SYNC | frame_num, adp->be + ADBE_FIFO);
+	//FIXME: use adbe flush interrupt
+	spin_lock_irq(&crtc->dev->event_lock);
+	if (crtc->state->event) {
+		drm_crtc_vblank_get(crtc);
+		adp->event = crtc->state->event;
+	}
+	crtc->state->event = NULL;
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_funcs adp_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+	.enable_vblank = adp_crtc_enable_vblank,
+	.disable_vblank = adp_crtc_disable_vblank,
+};
+
+
+static const struct drm_crtc_helper_funcs adp_crtc_helper_funcs = {
+	.atomic_enable = adp_crtc_atomic_enable,
+	.atomic_disable = adp_crtc_atomic_disable,
+	.atomic_flush = adp_crtc_atomic_flush,
+};
+
+static int adp_setup_crtc(struct adp_drv_private *adp)
+{
+	struct drm_device *drm = &adp->drm;
+	struct drm_plane *primary;
+	int ret;
+
+	primary = adp_plane_new(adp);
+	if (IS_ERR(primary))
+		return PTR_ERR(primary);
+
+	ret = drm_crtc_init_with_planes(drm, &adp->crtc, primary,
+					NULL, &adp_crtc_funcs, NULL);
+	if (ret)
+		return ret;
+
+	drm_crtc_helper_add(&adp->crtc, &adp_crtc_helper_funcs);
+	return 0;
+}
+
+static const struct drm_mode_config_funcs adp_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int adp_setup_mode_config(struct adp_drv_private *adp)
+{
+	struct drm_device *drm = &adp->drm;
+	int ret;
+	u32 size;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ret;
+
+	/*
+	 * Query screen size restrict the frame buffer size to the screen size
+	 * aligned to the next multiple of 64. This is not necessary but can be
+	 * used as simple check for non-desktop devices.
+	 * Xorg's modesetting driver does not care about the connector
+	 * "non-desktop" property. The max frame buffer width or height can be
+	 * easily checked and a device can be reject if the max width/height is
+	 * smaller than 120 for example.
+	 * Any touchbar daemon is not limited by this small framebuffer size.
+	 */
+	size = readl(adp->fe + ADP_SCREEN_SIZE);
+
+	drm->mode_config.min_width = 32;
+	drm->mode_config.min_height = 32;
+	drm->mode_config.max_width = ALIGN(FIELD_GET(ADP_SCREEN_HSIZE, size), 64);
+	drm->mode_config.max_height = ALIGN(FIELD_GET(ADP_SCREEN_VSIZE, size), 64);
+	drm->mode_config.preferred_depth = 24;
+	drm->mode_config.prefer_shadow = 0;
+	drm->mode_config.funcs = &adp_mode_config_funcs;
+
+	ret = adp_setup_crtc(adp);
+	if (ret) {
+		drm_err(drm, "failed to create crtc");
+		return ret;
+	}
+
+	adp->encoder = drmm_plain_encoder_alloc(drm, NULL, DRM_MODE_ENCODER_DSI, NULL);
+	if (IS_ERR(adp->encoder)) {
+		drm_err(drm, "failed to init encoder");
+		return PTR_ERR(adp->encoder);
+	}
+	adp->encoder->possible_crtcs = ALL_CRTCS;
+
+	ret = drm_bridge_attach(adp->encoder, adp->next_bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		drm_err(drm, "failed to init bridge chain");
+		return ret;
+	}
+
+	adp->connector = drm_bridge_connector_init(drm, adp->encoder);
+	if (IS_ERR(adp->connector))
+		return PTR_ERR(adp->connector);
+
+	drm_connector_attach_encoder(adp->connector, adp->encoder);
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0) {
+		drm_err(drm, "failed to initialize vblank");
+		return ret;
+	}
+
+	drm_mode_config_reset(drm);
+
+	return 0;
+}
+
+static int adp_parse_of(struct platform_device *pdev, struct adp_drv_private *adp)
+{
+	struct device *dev = &pdev->dev;
+
+	adp->be = devm_platform_ioremap_resource_byname(pdev, "be");
+	if (IS_ERR(adp->be)) {
+		dev_err(dev, "failed to map display backend mmio");
+		return PTR_ERR(adp->be);
+	}
+
+	adp->fe = devm_platform_ioremap_resource_byname(pdev, "fe");
+	if (IS_ERR(adp->fe)) {
+		dev_err(dev, "failed to map display pipe mmio");
+		return PTR_ERR(adp->fe);
+	}
+
+	adp->be_irq = platform_get_irq_byname(pdev, "be");
+	if (adp->be_irq < 0) {
+		dev_err(dev, "failed to find be irq");
+		return adp->be_irq;
+	}
+
+	adp->fe_irq = platform_get_irq_byname(pdev, "fe");
+	if (adp->fe_irq < 0) {
+		dev_err(dev, "failed to find fe irq");
+		return adp->fe_irq;
+	}
+
+	return 0;
+}
+
+static irqreturn_t adp_fe_irq(int irq, void *arg)
+{
+	struct adp_drv_private *adp = (struct adp_drv_private *)arg;
+	u32 int_status;
+	u32 int_ctl;
+
+	spin_lock(&adp->irq_lock);
+
+	int_status = readl(adp->fe + ADP_INT_STATUS);
+	if (int_status & ADP_INT_STATUS_VBLANK) {
+		drm_crtc_handle_vblank(&adp->crtc);
+		spin_lock(&adp->crtc.dev->event_lock);
+		if (adp->event) {
+			int_ctl = readl(adp->fe + ADP_CTRL);
+			if ((int_ctl & 0xF00) == 0x600) {
+				drm_crtc_send_vblank_event(&adp->crtc, adp->event);
+				adp->event = NULL;
+				drm_crtc_vblank_put(&adp->crtc);
+			}
+		}
+		spin_unlock(&adp->crtc.dev->event_lock);
+	}
+
+	writel(int_status, adp->fe + ADP_INT_STATUS);
+
+	spin_unlock(&adp->irq_lock);
+
+	return IRQ_HANDLED;
+}
+
+static int adp_drm_bind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+	struct adp_drv_private *adp = to_adp(drm);
+	int err;
+
+	adp_disable_vblank(adp);
+	writel(ADP_CTRL_FIFO_ON | ADP_CTRL_VBLANK_ON, adp->fe + ADP_CTRL);
+
+	adp->next_bridge = drmm_of_get_bridge(&adp->drm, dev->of_node, 0, 0);
+	if (IS_ERR(adp->next_bridge)) {
+		dev_err(dev, "failed to find next bridge");
+		return PTR_ERR(adp->next_bridge);
+	}
+
+	err = adp_setup_mode_config(adp);
+	if (err < 0)
+		return err;
+
+	err = request_irq(adp->fe_irq, adp_fe_irq, 0, "adp-fe", adp);
+	if (err)
+		return err;
+
+	err = drm_dev_register(&adp->drm, 0);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void adp_drm_unbind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+	struct adp_drv_private *adp = to_adp(drm);
+
+	drm_dev_unregister(drm);
+	drm_atomic_helper_shutdown(drm);
+	free_irq(adp->fe_irq, adp);
+}
+
+static const struct component_master_ops adp_master_ops = {
+	.bind	= adp_drm_bind,
+	.unbind = adp_drm_unbind,
+};
+
+static int compare_dev(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+static int adp_probe(struct platform_device *pdev)
+{
+	struct device_node *port;
+	struct component_match *match = NULL;
+	struct adp_drv_private *adp;
+	int err;
+
+	adp = devm_drm_dev_alloc(&pdev->dev, &adp_driver, struct adp_drv_private, drm);
+	if (IS_ERR(adp))
+		return PTR_ERR(adp);
+
+	spin_lock_init(&adp->irq_lock);
+
+	dev_set_drvdata(&pdev->dev, &adp->drm);
+
+	err = adp_parse_of(pdev, adp);
+	if (err < 0)
+		return err;
+
+	port = of_graph_get_remote_node(pdev->dev.of_node, 0, 0);
+	if (!port)
+		return -ENODEV;
+
+	drm_of_component_match_add(&pdev->dev, &match, compare_dev, port);
+	of_node_put(port);
+
+	return component_master_add_with_match(&pdev->dev, &adp_master_ops, match);
+}
+
+static void adp_remove(struct platform_device *pdev)
+{
+	component_master_del(&pdev->dev, &adp_master_ops);
+	dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static const struct of_device_id adp_of_match[] = {
+	{ .compatible = "apple,h7-display-pipe", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adp_of_match);
+
+static struct platform_driver adp_platform_driver = {
+	.driver = {
+		.name = "adp",
+		.of_match_table = adp_of_match,
+	},
+	.probe = adp_probe,
+	.remove = adp_remove,
+};
+
+module_platform_driver(adp_platform_driver);
+
+MODULE_DESCRIPTION("Apple Display Pipe DRM driver");
+MODULE_LICENSE("GPL");

-- 
2.48.1

Re: [PATCH v5 2/5] drm: adp: Add Apple Display Pipe driver

[Dmitry Baryshkov]

On Wed, Feb 05, 2025 at 11:10:51PM +0100, Sasha Finkelstein via B4 Relay wrote:
> From: Sasha Finkelstein <fnkl.kernel@gmail.com>
> 
> This display controller is present on M-series chips and is used
> to drive the touchbar display.
> 
> Co-developed-by: Janne Grunau <j@jannau.net>
> Signed-off-by: Janne Grunau <j@jannau.net>
> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
> ---
>  drivers/gpu/drm/Kconfig        |   2 +
>  drivers/gpu/drm/Makefile       |   1 +
>  drivers/gpu/drm/adp/Kconfig    |  17 ++
>  drivers/gpu/drm/adp/Makefile   |   5 +
>  drivers/gpu/drm/adp/adp-mipi.c | 276 ++++++++++++++++++
>  drivers/gpu/drm/adp/adp_drv.c  | 617 +++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 918 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

[PATCH v5 3/5] drm: panel: Add a panel driver for the Summit display

[Sasha Finkelstein via B4 Relay]

From: Sasha Finkelstein <fnkl.kernel@gmail.com>

This is the display panel used for the touchbar on laptops that have it.

Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig        |   9 +++
 drivers/gpu/drm/panel/Makefile       |   1 +
 drivers/gpu/drm/panel/panel-summit.c | 132 +++++++++++++++++++++++++++++++++++
 3 files changed, 142 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d7469c565d1db8b8e974dd6c45d03d9352d99d63..5085a82e4bc695e85cabbc3200859bbe10cb0f91 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -925,6 +925,15 @@ config DRM_PANEL_SIMPLE
 	  that it can be automatically turned off when the panel goes into a
 	  low power state.
 
+config DRM_PANEL_SUMMIT
+	tristate "Apple Summit display panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y if you want to enable support for the "Summit" display panel
+	  used as a touchbar on certain Apple laptops.
+
 config DRM_PANEL_SYNAPTICS_R63353
 	tristate "Synaptics R63353-based panels"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7dcf72646cacff11bab90c78e3b8b1f357e5f14a..10ac2e850f5cd6d6546439de75483466e4015d1a 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+obj-$(CONFIG_DRM_PANEL_SUMMIT) += panel-summit.o
 obj-$(CONFIG_DRM_PANEL_SYNAPTICS_R63353) += panel-synaptics-r63353.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
diff --git a/drivers/gpu/drm/panel/panel-summit.c b/drivers/gpu/drm/panel/panel-summit.c
new file mode 100644
index 0000000000000000000000000000000000000000..fb084f280c6fa3197b64876edd03172dbdf962b3
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-summit.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/backlight.h>
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <video/mipi_display.h>
+
+struct summit_data {
+	struct mipi_dsi_device *dsi;
+	struct backlight_device *bl;
+	struct drm_panel panel;
+};
+
+static int summit_set_brightness(struct device *dev)
+{
+	struct summit_data *s_data = dev_get_drvdata(dev);
+	int level = backlight_get_brightness(s_data->bl);
+
+	return mipi_dsi_dcs_set_display_brightness(s_data->dsi, level);
+}
+
+static int summit_bl_update_status(struct backlight_device *dev)
+{
+	return summit_set_brightness(&dev->dev);
+}
+
+static const struct backlight_ops summit_bl_ops = {
+	.update_status	= summit_bl_update_status,
+};
+
+static int summit_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct drm_display_mode *mode = drm_mode_create(connector->dev);
+
+	connector->display_info.non_desktop = true;
+	drm_object_property_set_value(&connector->base,
+				      connector->dev->mode_config.non_desktop_property,
+				      connector->display_info.non_desktop);
+
+	mode->vdisplay = 2008;
+	mode->hdisplay = 60;
+	mode->hsync_start = mode->hdisplay + 8;
+	mode->hsync_end = mode->hsync_start + 80;
+	mode->htotal = mode->hsync_end + 40;
+	mode->vsync_start = mode->vdisplay + 1;
+	mode->vsync_end = mode->vsync_start + 15;
+	mode->vtotal = mode->vsync_end + 6;
+	mode->clock = (mode->vtotal * mode->htotal * 60) / 1000;
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
+static const struct drm_panel_funcs summit_panel_funcs = {
+	.get_modes = summit_get_modes,
+};
+
+static int summit_probe(struct mipi_dsi_device *dsi)
+{
+	struct backlight_properties props = { 0 };
+	struct device *dev = &dsi->dev;
+	struct summit_data *s_data;
+	int ret;
+
+	s_data = devm_kzalloc(dev, sizeof(*s_data), GFP_KERNEL);
+	if (!s_data)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, s_data);
+	s_data->dsi = dsi;
+
+	ret = device_property_read_u32(dev, "max-brightness", &props.max_brightness);
+	if (ret)
+		return ret;
+	props.type = BACKLIGHT_RAW;
+
+	s_data->bl = devm_backlight_device_register(dev, dev_name(dev),
+						    dev, s_data, &summit_bl_ops, &props);
+	if (IS_ERR(s_data->bl))
+		return PTR_ERR(s_data->bl);
+
+	drm_panel_init(&s_data->panel, dev, &summit_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	drm_panel_add(&s_data->panel);
+
+	return mipi_dsi_attach(dsi);
+}
+
+static void summit_remove(struct mipi_dsi_device *dsi)
+{
+	struct summit_data *s_data = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&s_data->panel);
+}
+
+static int summit_suspend(struct device *dev)
+{
+	struct summit_data *s_data = dev_get_drvdata(dev);
+
+	return mipi_dsi_dcs_set_display_brightness(s_data->dsi, 0);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(summit_pm_ops, summit_suspend,
+				summit_set_brightness);
+
+static const struct of_device_id summit_of_match[] = {
+	{ .compatible = "apple,summit" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, summit_of_match);
+
+static struct mipi_dsi_driver summit_driver = {
+	.probe = summit_probe,
+	.remove = summit_remove,
+	.driver = {
+		.name = "panel-summit",
+		.of_match_table = summit_of_match,
+		.pm = pm_sleep_ptr(&summit_pm_ops),
+	},
+};
+module_mipi_dsi_driver(summit_driver);
+
+MODULE_DESCRIPTION("Summit Display Panel Driver");
+MODULE_LICENSE("GPL");

-- 
2.48.1

Re: [PATCH v5 3/5] drm: panel: Add a panel driver for the Summit display

[Dmitry Baryshkov]

On Wed, Feb 05, 2025 at 11:10:52PM +0100, Sasha Finkelstein via B4 Relay wrote:
> From: Sasha Finkelstein <fnkl.kernel@gmail.com>
> 
> This is the display panel used for the touchbar on laptops that have it.
> 
> Co-developed-by: Nick Chan <towinchenmi@gmail.com>
> Signed-off-by: Nick Chan <towinchenmi@gmail.com>
> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
> ---
>  drivers/gpu/drm/panel/Kconfig        |   9 +++
>  drivers/gpu/drm/panel/Makefile       |   1 +
>  drivers/gpu/drm/panel/panel-summit.c | 132 +++++++++++++++++++++++++++++++++++
>  3 files changed, 142 insertions(+)
> 
> +
> +static int summit_get_modes(struct drm_panel *panel,
> +			    struct drm_connector *connector)
> +{
> +	struct drm_display_mode *mode = drm_mode_create(connector->dev);
> +
> +	connector->display_info.non_desktop = true;
> +	drm_object_property_set_value(&connector->base,
> +				      connector->dev->mode_config.non_desktop_property,
> +				      connector->display_info.non_desktop);
> +
> +	mode->vdisplay = 2008;
> +	mode->hdisplay = 60;
> +	mode->hsync_start = mode->hdisplay + 8;
> +	mode->hsync_end = mode->hsync_start + 80;
> +	mode->htotal = mode->hsync_end + 40;
> +	mode->vsync_start = mode->vdisplay + 1;
> +	mode->vsync_end = mode->vsync_start + 15;
> +	mode->vtotal = mode->vsync_end + 6;
> +	mode->clock = (mode->vtotal * mode->htotal * 60) / 1000;
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
> +	drm_mode_set_name(mode);
> +	drm_mode_probed_add(connector, mode);
> +	return 1;
> +}

I think most of the drivers store mode in a static var and then use
drm_connector_helper_get_modes_fixed(). It's a matter of taste, but I
think the latter one is a nice helper.

Other than that:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> +static const struct drm_panel_funcs summit_panel_funcs = {
> +	.get_modes = summit_get_modes,
> +};
> +

-- 
With best wishes
Dmitry

Re: [PATCH v5 3/5] drm: panel: Add a panel driver for the Summit display

[Neil Armstrong]

On 05/02/2025 23:10, Sasha Finkelstein via B4 Relay wrote:
> From: Sasha Finkelstein <fnkl.kernel@gmail.com>
> 
> This is the display panel used for the touchbar on laptops that have it.
> 
> Co-developed-by: Nick Chan <towinchenmi@gmail.com>
> Signed-off-by: Nick Chan <towinchenmi@gmail.com>
> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
> ---
>   drivers/gpu/drm/panel/Kconfig        |   9 +++
>   drivers/gpu/drm/panel/Makefile       |   1 +
>   drivers/gpu/drm/panel/panel-summit.c | 132 +++++++++++++++++++++++++++++++++++
>   3 files changed, 142 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index d7469c565d1db8b8e974dd6c45d03d9352d99d63..5085a82e4bc695e85cabbc3200859bbe10cb0f91 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -925,6 +925,15 @@ config DRM_PANEL_SIMPLE
>   	  that it can be automatically turned off when the panel goes into a
>   	  low power state.
>   
> +config DRM_PANEL_SUMMIT
> +	tristate "Apple Summit display panel"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y if you want to enable support for the "Summit" display panel
> +	  used as a touchbar on certain Apple laptops.
> +
>   config DRM_PANEL_SYNAPTICS_R63353
>   	tristate "Synaptics R63353-based panels"
>   	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 7dcf72646cacff11bab90c78e3b8b1f357e5f14a..10ac2e850f5cd6d6546439de75483466e4015d1a 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
>   obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
>   obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
>   obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> +obj-$(CONFIG_DRM_PANEL_SUMMIT) += panel-summit.o
>   obj-$(CONFIG_DRM_PANEL_SYNAPTICS_R63353) += panel-synaptics-r63353.o
>   obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
>   obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
> diff --git a/drivers/gpu/drm/panel/panel-summit.c b/drivers/gpu/drm/panel/panel-summit.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..fb084f280c6fa3197b64876edd03172dbdf962b3
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-summit.c
> @@ -0,0 +1,132 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/backlight.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_mode.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <video/mipi_display.h>
> +
> +struct summit_data {
> +	struct mipi_dsi_device *dsi;
> +	struct backlight_device *bl;
> +	struct drm_panel panel;
> +};
> +
> +static int summit_set_brightness(struct device *dev)
> +{
> +	struct summit_data *s_data = dev_get_drvdata(dev);
> +	int level = backlight_get_brightness(s_data->bl);
> +
> +	return mipi_dsi_dcs_set_display_brightness(s_data->dsi, level);
> +}
> +
> +static int summit_bl_update_status(struct backlight_device *dev)
> +{
> +	return summit_set_brightness(&dev->dev);
> +}
> +
> +static const struct backlight_ops summit_bl_ops = {
> +	.update_status	= summit_bl_update_status,
> +};
> +
> +static int summit_get_modes(struct drm_panel *panel,
> +			    struct drm_connector *connector)
> +{
> +	struct drm_display_mode *mode = drm_mode_create(connector->dev);
> +
> +	connector->display_info.non_desktop = true;
> +	drm_object_property_set_value(&connector->base,
> +				      connector->dev->mode_config.non_desktop_property,
> +				      connector->display_info.non_desktop);
> +
> +	mode->vdisplay = 2008;
> +	mode->hdisplay = 60;
> +	mode->hsync_start = mode->hdisplay + 8;
> +	mode->hsync_end = mode->hsync_start + 80;
> +	mode->htotal = mode->hsync_end + 40;
> +	mode->vsync_start = mode->vdisplay + 1;
> +	mode->vsync_end = mode->vsync_start + 15;
> +	mode->vtotal = mode->vsync_end + 6;
> +	mode->clock = (mode->vtotal * mode->htotal * 60) / 1000;
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
> +	drm_mode_set_name(mode);
> +	drm_mode_probed_add(connector, mode);
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs summit_panel_funcs = {
> +	.get_modes = summit_get_modes,
> +};
> +
> +static int summit_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct backlight_properties props = { 0 };
> +	struct device *dev = &dsi->dev;
> +	struct summit_data *s_data;
> +	int ret;
> +
> +	s_data = devm_kzalloc(dev, sizeof(*s_data), GFP_KERNEL);
> +	if (!s_data)
> +		return -ENOMEM;
> +
> +	mipi_dsi_set_drvdata(dsi, s_data);
> +	s_data->dsi = dsi;
> +
> +	ret = device_property_read_u32(dev, "max-brightness", &props.max_brightness);
> +	if (ret)
> +		return ret;
> +	props.type = BACKLIGHT_RAW;
> +
> +	s_data->bl = devm_backlight_device_register(dev, dev_name(dev),
> +						    dev, s_data, &summit_bl_ops, &props);
> +	if (IS_ERR(s_data->bl))
> +		return PTR_ERR(s_data->bl);
> +
> +	drm_panel_init(&s_data->panel, dev, &summit_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +	drm_panel_add(&s_data->panel);
> +
> +	return mipi_dsi_attach(dsi);
> +}
> +
> +static void summit_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct summit_data *s_data = mipi_dsi_get_drvdata(dsi);
> +
> +	mipi_dsi_detach(dsi);
> +	drm_panel_remove(&s_data->panel);
> +}
> +
> +static int summit_suspend(struct device *dev)
> +{
> +	struct summit_data *s_data = dev_get_drvdata(dev);
> +
> +	return mipi_dsi_dcs_set_display_brightness(s_data->dsi, 0);
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(summit_pm_ops, summit_suspend,
> +				summit_set_brightness);
> +
> +static const struct of_device_id summit_of_match[] = {
> +	{ .compatible = "apple,summit" },
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, summit_of_match);
> +
> +static struct mipi_dsi_driver summit_driver = {
> +	.probe = summit_probe,
> +	.remove = summit_remove,
> +	.driver = {
> +		.name = "panel-summit",
> +		.of_match_table = summit_of_match,
> +		.pm = pm_sleep_ptr(&summit_pm_ops),
> +	},
> +};
> +module_mipi_dsi_driver(summit_driver);
> +
> +MODULE_DESCRIPTION("Summit Display Panel Driver");
> +MODULE_LICENSE("GPL");
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

[PATCH v5 4/5] arm64: dts: apple: Add touchbar screen nodes

[Sasha Finkelstein via B4 Relay]

From: Sasha Finkelstein <fnkl.kernel@gmail.com>

Adds device tree entries for the touchbar screen

Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 arch/arm64/boot/dts/apple/t8103-j293.dts | 31 ++++++++++++++++
 arch/arm64/boot/dts/apple/t8103.dtsi     | 61 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/apple/t8112-j493.dts | 31 ++++++++++++++++
 arch/arm64/boot/dts/apple/t8112.dtsi     | 61 ++++++++++++++++++++++++++++++++
 4 files changed, 184 insertions(+)

diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 56b0c67bfcda321b60c621de092643017693ff91..3af8536da779b56bf856cf40befd74d4737baa8f 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -49,3 +49,34 @@ &i2c4 {
 &fpwm1 {
 	status = "okay";
 };
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j293-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9b0dad6b618444ac6b1c9735c50cccfc3965f947..b08176c139ceef913683e41cc7d8a755e6d3216b 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -356,6 +356,67 @@ cpufreq_p: performance-controller@211e20000 {
 			#performance-domain-cells = <0>;
 		};
 
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 504 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		sio_dart: iommu@235004000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x2 0x35004000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
index 0ad908349f55406783942735a2e9dad54cda00ec..372fe69a96f6b84f576221101a4127d68bb54691 100644
--- a/arch/arm64/boot/dts/apple/t8112-j493.dts
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -35,6 +35,37 @@ led-0 {
 	};
 };
 
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j493-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
index 1666e6ab250bc0be9b8318e3c8fc903ccd3f3760..1eead9640543632c3ba86c1ff766258e3158c84c 100644
--- a/arch/arm64/boot/dts/apple/t8112.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -379,6 +379,67 @@ cpufreq_p: cpufreq@211e20000 {
 			#performance-domain-cells = <0>;
 		};
 
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8112-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 618 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 616 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8112-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		sio_dart: iommu@235004000 {
 			compatible = "apple,t8110-dart";
 			reg = <0x2 0x35004000 0x0 0x4000>;

-- 
2.48.1

[PATCH v5 5/5] MAINTAINERS: Add entries for touchbar display driver

[Sasha Finkelstein via B4 Relay]

From: Sasha Finkelstein <fnkl.kernel@gmail.com>

Add the MAINTAINERS entries for the driver

Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index a87ddad78e26f28ffd0f3433560d6db1518f9f95..4ce0d3bcf67910d909ba41261535dcb14a24a7b7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2189,6 +2189,9 @@ F:	Documentation/devicetree/bindings/arm/apple.yaml
 F:	Documentation/devicetree/bindings/arm/apple/*
 F:	Documentation/devicetree/bindings/clock/apple,nco.yaml
 F:	Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
+F:	Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml
+F:	Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
+F:	Documentation/devicetree/bindings/display/panel/apple,summit.yaml
 F:	Documentation/devicetree/bindings/dma/apple,admac.yaml
 F:	Documentation/devicetree/bindings/i2c/apple,i2c.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/apple,*
@@ -2208,6 +2211,8 @@ F:	drivers/bluetooth/hci_bcm4377.c
 F:	drivers/clk/clk-apple-nco.c
 F:	drivers/cpufreq/apple-soc-cpufreq.c
 F:	drivers/dma/apple-admac.c
+F:	drivers/gpu/drm/adp/
+F:	drivers/gpu/drm/panel/panel-summit.c
 F:	drivers/pmdomain/apple/
 F:	drivers/i2c/busses/i2c-pasemi-core.c
 F:	drivers/i2c/busses/i2c-pasemi-platform.c

-- 
2.48.1

Re: [PATCH v5 5/5] MAINTAINERS: Add entries for touchbar display driver

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1754 bytes --]

On Wed, Feb 05, 2025 at 11:10:54PM +0100, Sasha Finkelstein via B4 Relay wrote:
> From: Sasha Finkelstein <fnkl.kernel@gmail.com>
> 
> Add the MAINTAINERS entries for the driver
> 
> Acked-by: Sven Peter <sven@svenpeter.dev>
> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
> ---
>  MAINTAINERS | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a87ddad78e26f28ffd0f3433560d6db1518f9f95..4ce0d3bcf67910d909ba41261535dcb14a24a7b7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2189,6 +2189,9 @@ F:	Documentation/devicetree/bindings/arm/apple.yaml
>  F:	Documentation/devicetree/bindings/arm/apple/*
>  F:	Documentation/devicetree/bindings/clock/apple,nco.yaml
>  F:	Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
> +F:	Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml
> +F:	Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
> +F:	Documentation/devicetree/bindings/display/panel/apple,summit.yaml
>  F:	Documentation/devicetree/bindings/dma/apple,admac.yaml
>  F:	Documentation/devicetree/bindings/i2c/apple,i2c.yaml
>  F:	Documentation/devicetree/bindings/interrupt-controller/apple,*
> @@ -2208,6 +2211,8 @@ F:	drivers/bluetooth/hci_bcm4377.c
>  F:	drivers/clk/clk-apple-nco.c
>  F:	drivers/cpufreq/apple-soc-cpufreq.c
>  F:	drivers/dma/apple-admac.c
> +F:	drivers/gpu/drm/adp/
> +F:	drivers/gpu/drm/panel/panel-summit.c
>  F:	drivers/pmdomain/apple/
>  F:	drivers/i2c/busses/i2c-pasemi-core.c
>  F:	drivers/i2c/busses/i2c-pasemi-platform.c

Sorry to figure it out that late, but how do you plan on maintaining it?
Where will the patches go through, and who will you send PR to?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 273 bytes --]

Re: [PATCH v5 5/5] MAINTAINERS: Add entries for touchbar display driver

[Sasha Finkelstein]

On Thu, 6 Feb 2025 at 10:17, Maxime Ripard <mripard@kernel.org> wrote:
> Sorry to figure it out that late, but how do you plan on maintaining it?
> Where will the patches go through, and who will you send PR to?

Downstream development is done via the https://github.com/AsahiLinux/linux/
repo, then send patches to ml. Not sure if i want to send PR personally,
it will probably go via one of the drm trees or via asahi-soc.

Re: [PATCH v5 5/5] MAINTAINERS: Add entries for touchbar display driver

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 679 bytes --]

On Thu, Feb 06, 2025 at 10:24:43AM +0100, Sasha Finkelstein wrote:
> On Thu, 6 Feb 2025 at 10:17, Maxime Ripard <mripard@kernel.org> wrote:
> > Sorry to figure it out that late, but how do you plan on maintaining it?
> > Where will the patches go through, and who will you send PR to?
> 
> Downstream development is done via the https://github.com/AsahiLinux/linux/
> repo, then send patches to ml. Not sure if i want to send PR personally,
> it will probably go via one of the drm trees or via asahi-soc.

If it needs to go through a DRM tree (and it really really should), you
need to make a separate entry, with the drm-misc tree listed as the git
tree.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 273 bytes --]

Re: [PATCH v5 0/5] Driver for pre-DCP apple display controller.

[Neil Armstrong]

On 05/02/2025 23:10, Sasha Finkelstein via B4 Relay wrote:
> Hi.
> 
> This patch series adds support for a secondary display controller
> present on Apple M1/M2 chips and used to drive the display of the
> "touchbar" touch panel present on those.
> 
> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
> ---

LGTM should patches 1, 2, 3 & 5 go via drm-misc ?

Neil