[PATCH AUTOSEL 5.0 065/262] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry

[PATCH AUTOSEL 5.0 065/262] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit ef9051c72ab7bc664e8047c55ac74bdb1c7fa3ee ]

Currently, the bandwidth is updated wrongly in BW table in tx_stats
debugfs per sta as there is difference in number of bandwidth type
in mac80211 and driver stats table. This leads to bandwidth getting
updated at wrong index in bandwidth table in tx_stats.

Fix this index mismatch between mac80211 and driver stats table (BW table)
by making the number of bandwidth type in driver compatible with mac80211.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support")
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 ++++---
 drivers/net/wireless/ath/ath10k/wmi.h         | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 4778a455d81a..068f1a7e07d3 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -696,11 +696,12 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
 						 "  %llu ", stats->ht[j][i]);
 			len += scnprintf(buf + len, size - len, "\n");
 			len += scnprintf(buf + len, size - len,
-					" BW %s (20,40,80,160 MHz)\n", str[j]);
+					" BW %s (20,5,10,40,80,160 MHz)\n", str[j]);
 			len += scnprintf(buf + len, size - len,
-					 "  %llu %llu %llu %llu\n",
+					 "  %llu %llu %llu %llu %llu %llu\n",
 					 stats->bw[j][0], stats->bw[j][1],
-					 stats->bw[j][2], stats->bw[j][3]);
+					 stats->bw[j][2], stats->bw[j][3],
+					 stats->bw[j][4], stats->bw[j][5]);
 			len += scnprintf(buf + len, size - len,
 					 " NSS %s (1x1,2x2,3x3,4x4)\n", str[j]);
 			len += scnprintf(buf + len, size - len,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 2034ccc7cc72..1d5d0209ebeb 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5003,7 +5003,7 @@ enum wmi_rate_preamble {
 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)	(((flags) >> 6) & 0x1)
 
 #define ATH10K_VHT_MCS_NUM	10
-#define ATH10K_BW_NUM		4
+#define ATH10K_BW_NUM		6
 #define ATH10K_NSS_NUM		4
 #define ATH10K_LEGACY_NUM	12
 #define ATH10K_GI_NUM		2
-- 
2.19.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.0 079/262] ath10k: don't report unset rssi values to mac80211

[Sasha Levin]

From: Alagu Sankar <alagusankar@silex-india.com>

[ Upstream commit 7d444522303177f3a3c09b9abb104ddeea470a70 ]

The SDIO firmware does not provide RSSI value to the host, it's only set to
zero. In that case don't report the value to mac80211. One risk here is that
value zero might be a valid value with other firmware, currently there's no way
to detect that.

Without the fix, the rssi value indicated by iw changes between the actual
value and -95.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1.

Co-developed-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index f42bac204ef8..ecf34ce7acf0 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2130,9 +2130,15 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	hdr = (struct ieee80211_hdr *)skb->data;
 	rx_status = IEEE80211_SKB_RXCB(skb);
 	rx_status->chains |= BIT(0);
-	rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
-			    rx->ppdu.combined_rssi;
-	rx_status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
+	if (rx->ppdu.combined_rssi == 0) {
+		/* SDIO firmware does not provide signal */
+		rx_status->signal = 0;
+		rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
+	} else {
+		rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
+			rx->ppdu.combined_rssi;
+		rx_status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
+	}
 
 	spin_lock_bh(&ar->data_lock);
 	ch = ar->scan_channel;
-- 
2.19.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.0 157/262] ath10k: fix shadow register implementation for WCN3990

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 1863008369ae0407508033b4b00f98b985adeb15 ]

WCN3990 supports shadow registers write operation support
for copy engine for regular operation in powersave mode.

Since WCN3990 is a 64-bit target, the shadow register
implementation needs to be done in the copy engine handlers
for 64-bit target. Currently the shadow register implementation
is present in the 32-bit target handlers of copy engine.

Fix the shadow register copy engine write operation
implementation for 64-bit target(WCN3990).

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Fixes: b7ba83f7c414 ("ath10k: add support for shadow register for WNC3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/ce.c | 26 +++++++++++++-------------
 drivers/net/wireless/ath/ath10k/ce.h |  2 +-
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 2a5668b4f6bc..1a1ea4bbf8a0 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -500,14 +500,8 @@ static int _ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 	write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
 
 	/* WORKAROUND */
-	if (!(flags & CE_SEND_FLAG_GATHER)) {
-		if (ar->hw_params.shadow_reg_support)
-			ath10k_ce_shadow_src_ring_write_index_set(ar, ce_state,
-								  write_index);
-		else
-			ath10k_ce_src_ring_write_index_set(ar, ctrl_addr,
-							   write_index);
-	}
+	if (!(flags & CE_SEND_FLAG_GATHER))
+		ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
 
 	src_ring->write_index = write_index;
 exit:
@@ -581,8 +575,14 @@ static int _ath10k_ce_send_nolock_64(struct ath10k_ce_pipe *ce_state,
 	/* Update Source Ring Write Index */
 	write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
 
-	if (!(flags & CE_SEND_FLAG_GATHER))
-		ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
+	if (!(flags & CE_SEND_FLAG_GATHER)) {
+		if (ar->hw_params.shadow_reg_support)
+			ath10k_ce_shadow_src_ring_write_index_set(ar, ce_state,
+								  write_index);
+		else
+			ath10k_ce_src_ring_write_index_set(ar, ctrl_addr,
+							   write_index);
+	}
 
 	src_ring->write_index = write_index;
 exit:
@@ -1404,12 +1404,12 @@ static int ath10k_ce_alloc_shadow_base(struct ath10k *ar,
 				       u32 nentries)
 {
 	src_ring->shadow_base_unaligned = kcalloc(nentries,
-						  sizeof(struct ce_desc),
+						  sizeof(struct ce_desc_64),
 						  GFP_KERNEL);
 	if (!src_ring->shadow_base_unaligned)
 		return -ENOMEM;
 
-	src_ring->shadow_base = (struct ce_desc *)
+	src_ring->shadow_base = (struct ce_desc_64 *)
 			PTR_ALIGN(src_ring->shadow_base_unaligned,
 				  CE_DESC_RING_ALIGN);
 	return 0;
@@ -1461,7 +1461,7 @@ ath10k_ce_alloc_src_ring(struct ath10k *ar, unsigned int ce_id,
 		ret = ath10k_ce_alloc_shadow_base(ar, src_ring, nentries);
 		if (ret) {
 			dma_free_coherent(ar->dev,
-					  (nentries * sizeof(struct ce_desc) +
+					  (nentries * sizeof(struct ce_desc_64) +
 					   CE_DESC_RING_ALIGN),
 					  src_ring->base_addr_owner_space_unaligned,
 					  base_addr);
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index ead9987c3259..463e2fc8b501 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -118,7 +118,7 @@ struct ath10k_ce_ring {
 	u32 base_addr_ce_space;
 
 	char *shadow_base_unaligned;
-	struct ce_desc *shadow_base;
+	struct ce_desc_64 *shadow_base;
 
 	/* keep last */
 	void *per_transfer_context[0];
-- 
2.19.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k