* How to get tx rate in ath10k?
@ 2014-03-25 0:00 Ben Greear
2014-03-25 7:47 ` Kalle Valo
0 siblings, 1 reply; 3+ messages in thread
From: Ben Greear @ 2014-03-25 0:00 UTC (permalink / raw)
To: ath10k
With Janusz's changes, rx rate and rx-signal appear to be reported
correctly.
But, tx-rate is not reported.
Anyone have any suggestions for what needs doing to get
tx rate properly reported?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: How to get tx rate in ath10k?
2014-03-25 0:00 How to get tx rate in ath10k? Ben Greear
@ 2014-03-25 7:47 ` Kalle Valo
2014-03-25 15:51 ` Ben Greear
0 siblings, 1 reply; 3+ messages in thread
From: Kalle Valo @ 2014-03-25 7:47 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
Ben Greear <greearb@candelatech.com> writes:
> With Janusz's changes, rx rate and rx-signal appear to be reported
> correctly.
>
> But, tx-rate is not reported.
>
> Anyone have any suggestions for what needs doing to get
> tx rate properly reported?
Firmware does not provide this information to the host currently, so
this will need firmware changes.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: How to get tx rate in ath10k?
2014-03-25 7:47 ` Kalle Valo
@ 2014-03-25 15:51 ` Ben Greear
0 siblings, 0 replies; 3+ messages in thread
From: Ben Greear @ 2014-03-25 15:51 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
On 03/25/2014 12:47 AM, Kalle Valo wrote:
> Ben Greear <greearb@candelatech.com> writes:
>
>> With Janusz's changes, rx rate and rx-signal appear to be reported
>> correctly.
>>
>> But, tx-rate is not reported.
>>
>> Anyone have any suggestions for what needs doing to get
>> tx rate properly reported?
>
> Firmware does not provide this information to the host currently, so
> this will need firmware changes.
Ok, that was what I suspected. I'll work on adding it to my
firmware...
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-03-25 15:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-25 0:00 How to get tx rate in ath10k? Ben Greear
2014-03-25 7:47 ` Kalle Valo
2014-03-25 15:51 ` Ben Greear
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox