ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [ath10K] QCA6174 firmware
@ 2016-01-13 14:09 John Detter
  2016-01-13 14:40 ` Michal Kazior
  2016-01-17 18:15 ` vagner
  0 siblings, 2 replies; 5+ messages in thread
From: John Detter @ 2016-01-13 14:09 UTC (permalink / raw)
  To: ath10k

Hello everyone,

I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174 
card. I have tried using the firmware from both kvalo's repo and the 
official linux-firmware repo and neither of them have worked. I am 
running a fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also 
tried installing Ubuntu Gnome 15.10 with the mainline kernel build 
(Linux 4.4.0) and that didn't work either. The laptop I'm using does 
have a button on the keyboard to enable/disable the wifi and I'm not 
sure if it's causing an issue or not. I have checked rfkill list and 
there is neither a hard nor soft block on the wlan. I'm not really sure 
where to go from here, any help would be much appreciated!

Thanks for your time,

- John

Directory structure when I tried firmware from linux-firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# ls -al
total 744
drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
-rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:41 
board-pci-168c:003e:144d:412f.bin -> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin -> 
./firmware-4.bin

Directory structure when I tried kvalo's firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new# ls -al
total 844
drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
-rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
-rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:17 
board-pci-168c:003e:144d:412f.bin -> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:17 
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
lrwxrwxrwx 1 root root     44 Jan 13 07:18 firmware-5.bin -> 
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
-rw-r--r-- 1 root root  79801 Jan 13 07:17 
notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1


Here is the relevant part of my dmesg log:

jdetter@Ubuntu-15:~$ dmesg | grep ath10
[    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 
irq_mode 0 reset_mode 0
[    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for 
ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
[    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000, 
0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 
htt 3.26 wmi 4 cal otp max_sta 32
[    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 
0 testmode 0
[   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause 
event never came
[   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
[   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
[   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)

Here is my lspci and lshw output:

jdetter@Ubuntu-15:~$ lspci | grep QCA
3b:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless 
Network Adapter (rev 32)

root@Ubuntu-15:~# lshw
...
         *-pci:2
              description: PCI bridge
              product: Sunrise Point-H PCI Express Root Port #9
              vendor: Intel Corporation
              physical id: 1d
              bus info: pci@0000:00:1d.0
              version: f1
              width: 32 bits
              clock: 33MHz
              capabilities: pci pciexpress msi pm normal_decode 
bus_master cap_list
              configuration: driver=pcieport
              resources: irq:16 memory:ed200000-ed3fffff
            *-network DISABLED
                 description: Wireless interface
                 product: QCA6174 802.11ac Wireless Network Adapter
                 vendor: Qualcomm Atheros
                 physical id: 0
                 bus info: pci@0000:3b:00.0
                 logical name: wlp59s0
                 version: 32
                 serial: b8:86:87:c7:2d:a9
                 width: 64 bits
                 clock: 33MHz
                 capabilities: pm msi pciexpress bus_master cap_list 
ethernet physical wireless
                 configuration: broadcast=yes driver=ath10k_pci 
driverversion=4.2.0-23-generic firmware=WLAN.RM.2.0-00180-QCARMSWPZ-1 
latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
                 resources: irq:319 memory:ed200000-ed3fffff
...

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [ath10K] QCA6174 firmware
  2016-01-13 14:09 [ath10K] QCA6174 firmware John Detter
@ 2016-01-13 14:40 ` Michal Kazior
  2016-01-13 14:58   ` John Detter
  2016-01-17 18:15 ` vagner
  1 sibling, 1 reply; 5+ messages in thread
From: Michal Kazior @ 2016-01-13 14:40 UTC (permalink / raw)
  To: John Detter; +Cc: ath10k@lists.infradead.org

On 13 January 2016 at 15:09, John Detter <john@detter.com> wrote:
> Hello everyone,
>
> I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174
> card. I have tried using the firmware from both kvalo's repo and the
> official linux-firmware repo and neither of them have worked. I am running a
> fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also tried installing
> Ubuntu Gnome 15.10 with the mainline kernel build (Linux 4.4.0) and that
> didn't work either. The laptop I'm using does have a button on the keyboard
> to enable/disable the wifi and I'm not sure if it's causing an issue or not.
> I have checked rfkill list and there is neither a hard nor soft block on the
> wlan. I'm not really sure where to go from here, any help would be much
> appreciated!
>
> Thanks for your time,
>
> - John
>
> Directory structure when I tried firmware from linux-firmware:
>
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
> /lib/firmware/ath10k/QCA6174/hw3.0
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# ls -al
> total 744
> drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
> drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
> -rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
> lrwxrwxrwx 1 root root     11 Jan 13 07:41 board-pci-168c:003e:144d:412f.bin
> -> ./board.bin
> -rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
> lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin ->
> ./firmware-4.bin
>
> Directory structure when I tried kvalo's firmware:
>
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
> /lib/firmware/ath10k/QCA6174/hw3.0
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new# ls -al
> total 844
> drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
> drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
> -rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
> -rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin
> lrwxrwxrwx 1 root root     11 Jan 13 07:17 board-pci-168c:003e:144d:412f.bin
> -> ./board.bin
> -rw-r--r-- 1 root root 733784 Jan 13 07:17
> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
> lrwxrwxrwx 1 root root     44 Jan 13 07:18 firmware-5.bin ->
> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
> -rw-r--r-- 1 root root  79801 Jan 13 07:17
> notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1
>
>
> Here is the relevant part of my dmesg log:
>
> jdetter@Ubuntu-15:~$ dmesg | grep ath10
> [    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
> [    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 irq_mode
> 0 reset_mode 0
> [    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for
> ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
> [    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000,
> 0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 htt
> 3.26 wmi 4 cal otp max_sta 32
> [    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 0
> testmode 0
> [   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause
> event never came
> [   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
> [   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
> [   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
> [   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
> [   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)

Firmware command timeouts (-11) suggest that wrong board file was used
to boot the device.

The currently available board-2.bin doesn't seem to include your
device (168c:003e:144d:412f). You can list them with:

; strings board-2.bin | grep vendor
bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3361m
bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3362m
bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363m

Was this run on 4.4 or 4.2?

The board-2.bin support was added in 4.4. Prior to this the driver
would try to load the board-pci-xxx. files. You can:
 a) scream louder and complain to your card vendor and/or qualcomm
 b) use pre-4.4 kernel, get windows driver, extract .inf and eeprom
files from it, look for the one that matches your device
(168c:003e:144d:412f) and use it as board-pci-168c:003e:144d:412f.bin


Michal

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [ath10K] QCA6174 firmware
  2016-01-13 14:40 ` Michal Kazior
@ 2016-01-13 14:58   ` John Detter
  2016-01-13 15:02     ` Michal Kazior
  0 siblings, 1 reply; 5+ messages in thread
From: John Detter @ 2016-01-13 14:58 UTC (permalink / raw)
  To: Michal Kazior; +Cc: ath10k@lists.infradead.org

Michal,

Thanks for the speedy response! The dmesg, lspci and lshw outputs were generated when running 4.2.0, I didn't know you needed 4.4 in order for it to use board-2.bin. Even if I upgraded back to 4.4 the firmware still wouldn't work right?

Thanks for the help,

- John


On 01/13/2016 08:40 AM, Michal Kazior wrote:
> On 13 January 2016 at 15:09, John Detter<john@detter.com>  wrote:
>> Hello everyone,
>>
>> I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174
>> card. I have tried using the firmware from both kvalo's repo and the
>> official linux-firmware repo and neither of them have worked. I am running a
>> fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also tried installing
>> Ubuntu Gnome 15.10 with the mainline kernel build (Linux 4.4.0) and that
>> didn't work either. The laptop I'm using does have a button on the keyboard
>> to enable/disable the wifi and I'm not sure if it's causing an issue or not.
>> I have checked rfkill list and there is neither a hard nor soft block on the
>> wlan. I'm not really sure where to go from here, any help would be much
>> appreciated!
>>
>> Thanks for your time,
>>
>> - John
>>
>> Directory structure when I tried firmware from linux-firmware:
>>
>> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0#  pwd
>> /lib/firmware/ath10k/QCA6174/hw3.0
>> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0#  ls -al
>> total 744
>> drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
>> drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
>> -rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
>> lrwxrwxrwx 1 root root     11 Jan 13 07:41 board-pci-168c:003e:144d:412f.bin
>> -> ./board.bin
>> -rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
>> lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin ->
>> ./firmware-4.bin
>>
>> Directory structure when I tried kvalo's firmware:
>>
>> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0#  pwd
>> /lib/firmware/ath10k/QCA6174/hw3.0
>> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new#  ls -al
>> total 844
>> drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
>> drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
>> -rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
>> -rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin
>> lrwxrwxrwx 1 root root     11 Jan 13 07:17 board-pci-168c:003e:144d:412f.bin
>> -> ./board.bin
>> -rw-r--r-- 1 root root 733784 Jan 13 07:17
>> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
>> lrwxrwxrwx 1 root root     44 Jan 13 07:18 firmware-5.bin ->
>> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
>> -rw-r--r-- 1 root root  79801 Jan 13 07:17
>> notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1
>>
>>
>> Here is the relevant part of my dmesg log:
>>
>> jdetter@Ubuntu-15:~$ dmesg | grep ath10
>> [    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
>> [    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 irq_mode
>> 0 reset_mode 0
>> [    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for
>> ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
>> [    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000,
>> 0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 htt
>> 3.26 wmi 4 cal otp max_sta 32
>> [    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 0
>> testmode 0
>> [   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause
>> event never came
>> [   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
>> [   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
>> [   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
>> [   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
>> [   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
> Firmware command timeouts (-11) suggest that wrong board file was used
> to boot the device.
>
> The currently available board-2.bin doesn't seem to include your
> device (168c:003e:144d:412f). You can list them with:
>
> ; strings board-2.bin | grep vendor
> bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3361m
> bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3362m
> bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363m
>
> Was this run on 4.4 or 4.2?
>
> The board-2.bin support was added in 4.4. Prior to this the driver
> would try to load the board-pci-xxx. files. You can:
>   a) scream louder and complain to your card vendor and/or qualcomm
>   b) use pre-4.4 kernel, get windows driver, extract .inf and eeprom
> files from it, look for the one that matches your device
> (168c:003e:144d:412f) and use it as board-pci-168c:003e:144d:412f.bin
>
>
> Michal


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [ath10K] QCA6174 firmware
  2016-01-13 14:58   ` John Detter
@ 2016-01-13 15:02     ` Michal Kazior
  0 siblings, 0 replies; 5+ messages in thread
From: Michal Kazior @ 2016-01-13 15:02 UTC (permalink / raw)
  To: John Detter; +Cc: ath10k@lists.infradead.org

On 13 January 2016 at 15:58, John Detter <john@detter.com> wrote:
> Michal,
>
> Thanks for the speedy response! The dmesg, lspci and lshw outputs were
> generated when running 4.2.0, I didn't know you needed 4.4 in order for it
> to use board-2.bin. Even if I upgraded back to 4.4 the firmware still
> wouldn't work right?

Correct. The main problem at hand is incorrect board data which is
used to (simply saying) configure/initialize the device.

You may still want 4.4 though. It may contain fixes for other problems
that you still haven't reached to.


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [ath10K] QCA6174 firmware
  2016-01-13 14:09 [ath10K] QCA6174 firmware John Detter
  2016-01-13 14:40 ` Michal Kazior
@ 2016-01-17 18:15 ` vagner
  1 sibling, 0 replies; 5+ messages in thread
From: vagner @ 2016-01-17 18:15 UTC (permalink / raw)
  To: ath10k


I have a very similar issue here, with a new Lenovo IdeaPad I bought 3 
weeks ago...
It is really annoying to use a usb wireless that cannot hold internet 
conection for 5 minutes and then having to plug and unplug it again. 
After 15 years using GNU/Linux and now thinking in going back to Windows 
because of this unsolved issue
I have also tried to solve this issue with backports, Kvalo, Compiling a 
new kernel, copying firmware to /lib/firmware/ath10k folders and so on 
and nothing has worked.
When I compiled the driver, it claimed QCA9377, and I copied this folder 
to /lib/firmware/ath10k. The firmware worked, but the board.bin did not 
work and until now I did not solve the issue  :(


lspci

02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30)


lshw
  *-network UNCLAIMED
                 description: Network controller
                 product: Qualcomm Atheros
                 vendor: Qualcomm Atheros
                 physical id: 0
                 bus info: pci@0000:02:00.0
                 version: 30
                 width: 64 bits
                 clock: 33MHz
                 capabilities: bus_master cap_list
                 configuration: latency=0
                 resources: memory:a1000000-a11fffff


On 01/13/2016 04:09 PM, John Detter wrote:
> Hello everyone,
>
> I recently bought a laptop (Samsung) that has a Qualcomm Atheros 
> QCA6174 card. I have tried using the firmware from both kvalo's repo 
> and the official linux-firmware repo and neither of them have worked. 
> I am running a fresh Ubuntu 15.10 installation (Linux 4.2.0). I have 
> also tried installing Ubuntu Gnome 15.10 with the mainline kernel 
> build (Linux 4.4.0) and that didn't work either. The laptop I'm using 
> does have a button on the keyboard to enable/disable the wifi and I'm 
> not sure if it's causing an issue or not. I have checked rfkill list 
> and there is neither a hard nor soft block on the wlan. I'm not really 
> sure where to go from here, any help would be much appreciated!
>
> Thanks for your time,
>
> - John
>
> Directory structure when I tried firmware from linux-firmware:
>
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
> /lib/firmware/ath10k/QCA6174/hw3.0
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# ls -al
> total 744
> drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
> drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
> -rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
> lrwxrwxrwx 1 root root     11 Jan 13 07:41 
> board-pci-168c:003e:144d:412f.bin -> ./board.bin
> -rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
> lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin -> 
> ./firmware-4.bin
>
> Directory structure when I tried kvalo's firmware:
>
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
> /lib/firmware/ath10k/QCA6174/hw3.0
> root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new# ls -al
> total 844
> drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
> drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
> -rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
> -rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin
> lrwxrwxrwx 1 root root     11 Jan 13 07:17 
> board-pci-168c:003e:144d:412f.bin -> ./board.bin
> -rw-r--r-- 1 root root 733784 Jan 13 07:17 
> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
> lrwxrwxrwx 1 root root     44 Jan 13 07:18 firmware-5.bin -> 
> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
> -rw-r--r-- 1 root root  79801 Jan 13 07:17 
> notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1
>
>
> Here is the relevant part of my dmesg log:
>
> jdetter@Ubuntu-15:~$ dmesg | grep ath10
> [    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
> [    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 
> irq_mode 0 reset_mode 0
> [    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for 
> ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
> [    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000, 
> 0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 
> 5 htt 3.26 wmi 4 cal otp max_sta 32
> [    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 
> dfs 0 testmode 0
> [   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target 
> pause event never came
> [   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
> [   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
> [   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
> [   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
> [   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
>
> Here is my lspci and lshw output:
>
> jdetter@Ubuntu-15:~$ lspci | grep QCA
> 3b:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless 
> Network Adapter (rev 32)
>
> root@Ubuntu-15:~# lshw
> ...
>         *-pci:2
>              description: PCI bridge
>              product: Sunrise Point-H PCI Express Root Port #9
>              vendor: Intel Corporation
>              physical id: 1d
>              bus info: pci@0000:00:1d.0
>              version: f1
>              width: 32 bits
>              clock: 33MHz
>              capabilities: pci pciexpress msi pm normal_decode 
> bus_master cap_list
>              configuration: driver=pcieport
>              resources: irq:16 memory:ed200000-ed3fffff
>            *-network DISABLED
>                 description: Wireless interface
>                 product: QCA6174 802.11ac Wireless Network Adapter
>                 vendor: Qualcomm Atheros
>                 physical id: 0
>                 bus info: pci@0000:3b:00.0
>                 logical name: wlp59s0
>                 version: 32
>                 serial: b8:86:87:c7:2d:a9
>                 width: 64 bits
>                 clock: 33MHz
>                 capabilities: pm msi pciexpress bus_master cap_list 
> ethernet physical wireless
>                 configuration: broadcast=yes driver=ath10k_pci 
> driverversion=4.2.0-23-generic firmware=WLAN.RM.2.0-00180-QCARMSWPZ-1 
> latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
>                 resources: irq:319 memory:ed200000-ed3fffff
> ...
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-01-17 18:15 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-13 14:09 [ath10K] QCA6174 firmware John Detter
2016-01-13 14:40 ` Michal Kazior
2016-01-13 14:58   ` John Detter
2016-01-13 15:02     ` Michal Kazior
2016-01-17 18:15 ` vagner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox