* [PATCH 1/2] ath10k: add qca4019 hw params
2016-01-29 11:05 [PATCH 0/2] add hw param and wmi changes for qca4019 Raja Mani
@ 2016-01-29 11:05 ` Raja Mani
2016-01-29 11:05 ` [PATCH 2/2] ath10k: populate qca4019 fw specific wmi init params Raja Mani
2016-02-24 13:51 ` [PATCH 0/2] add hw param and wmi changes for qca4019 Valo, Kalle
2 siblings, 0 replies; 4+ messages in thread
From: Raja Mani @ 2016-01-29 11:05 UTC (permalink / raw)
To: ath10k; +Cc: Raja Mani, linux-wireless, Raja Mani
From: Raja Mani <rmani@codeaurora.org>
Add a new entry in hw_params_list for qca4019 with list of
it's own details.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 20 ++++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 8 ++++++++
drivers/net/wireless/ath/ath10k/targaddrs.h | 3 +++
3 files changed, 31 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5c684e0..ac29813 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -201,6 +201,26 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
},
},
+ {
+ .id = QCA4019_HW_1_0_DEV_VERSION,
+ .dev_id = 0,
+ .name = "qca4019 hw1.0",
+ .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .otp_exe_param = 0x0010000,
+ .continuous_frag_desc = true,
+ .channel_counters_freq_hz = 125000,
+ .max_probe_resp_desc_thres = 24,
+ .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+ .fw = {
+ .dir = QCA4019_HW_1_0_FW_DIR,
+ .fw = QCA4019_HW_1_0_FW_FILE,
+ .otp = QCA4019_HW_1_0_OTP_FILE,
+ .board = QCA4019_HW_1_0_BOARD_DATA_FILE,
+ .board_size = QCA4019_BOARD_DATA_SZ,
+ .board_ext_size = QCA4019_BOARD_EXT_DATA_SZ,
+ },
+ },
};
static const char *const ath10k_core_fw_feature_str[] = {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 4217bdb..291ca1f 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -106,6 +106,14 @@ enum qca9377_chip_id_rev {
#define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin"
#define QCA9377_HW_1_0_PATCH_LOAD_ADDR 0x1234
+/* QCA4019 1.0 definitions */
+#define QCA4019_HW_1_0_DEV_VERSION 0x01000000
+#define QCA4019_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA4019/hw1.0"
+#define QCA4019_HW_1_0_FW_FILE "firmware.bin"
+#define QCA4019_HW_1_0_OTP_FILE "otp.bin"
+#define QCA4019_HW_1_0_BOARD_DATA_FILE "board.bin"
+#define QCA4019_HW_1_0_PATCH_LOAD_ADDR 0x1234
+
#define ATH10K_FW_API2_FILE "firmware-2.bin"
#define ATH10K_FW_API3_FILE "firmware-3.bin"
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index 05a421b..361f143 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -456,4 +456,7 @@ Fw Mode/SubMode Mask
#define QCA99X0_BOARD_DATA_SZ 12288
#define QCA99X0_BOARD_EXT_DATA_SZ 0
+#define QCA4019_BOARD_DATA_SZ 12064
+#define QCA4019_BOARD_EXT_DATA_SZ 0
+
#endif /* __TARGADDRS_H__ */
--
1.8.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] ath10k: populate qca4019 fw specific wmi init params
2016-01-29 11:05 [PATCH 0/2] add hw param and wmi changes for qca4019 Raja Mani
2016-01-29 11:05 ` [PATCH 1/2] ath10k: add qca4019 hw params Raja Mani
@ 2016-01-29 11:05 ` Raja Mani
2016-02-24 13:51 ` [PATCH 0/2] add hw param and wmi changes for qca4019 Valo, Kalle
2 siblings, 0 replies; 4+ messages in thread
From: Raja Mani @ 2016-01-29 11:05 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Raja Mani
Some of the parameter like tx/rx chain mask, number of htt tx desc,
qcache active peer count, etc goes via wmi init cmd to qca4019 firmware
are different.
To make use of 10.4 gen_init function for qca4019, change wmi service
ready handler and 10.4 wmi init functions to adapt qca4019 specific
init values.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 14 ++++++++++++--
drivers/net/wireless/ath/ath10k/core.h | 6 ++++++
drivers/net/wireless/ath/ath10k/hw.h | 6 ------
drivers/net/wireless/ath/ath10k/wmi.c | 12 ++++++------
drivers/net/wireless/ath/ath10k/wmi.h | 1 -
5 files changed, 24 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index ac29813..565cbab 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -156,6 +156,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+ .num_msdu_desc = 1424,
+ .qcache_active_peers = 50,
+ .tx_chain_mask = 0xf,
+ .rx_chain_mask = 0xf,
+ .max_spatial_stream = 4,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -212,6 +217,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 125000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+ .num_msdu_desc = 2500,
+ .qcache_active_peers = 35,
+ .tx_chain_mask = 0x3,
+ .rx_chain_mask = 0x3,
+ .max_spatial_stream = 2,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
.fw = QCA4019_HW_1_0_FW_FILE,
@@ -1522,9 +1532,9 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
- ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
+ ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc;
ar->fw_stats_req_mask = WMI_STAT_PEER;
- ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM;
+ ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 2e1a7da..dad608c 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -669,6 +669,12 @@ struct ath10k {
/* The padding bytes's location is different on various chips */
enum ath10k_hw_4addr_pad hw_4addr_pad;
+ u32 num_msdu_desc;
+ u32 qcache_active_peers;
+ u32 tx_chain_mask;
+ u32 rx_chain_mask;
+ u32 max_spatial_stream;
+
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 291ca1f..2dece8d 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -426,16 +426,11 @@ enum ath10k_hw_4addr_pad {
#define TARGET_10_4_ACTIVE_PEERS 0
#define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512
-#define TARGET_10_4_QCACHE_ACTIVE_PEERS 50
#define TARGET_10_4_NUM_OFFLOAD_PEERS 0
#define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0
#define TARGET_10_4_NUM_PEER_KEYS 2
#define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2)
#define TARGET_10_4_AST_SKID_LIMIT 32
-#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \
- BIT(2) | BIT(3))
-#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \
- BIT(2) | BIT(3))
/* 100 ms for video, best-effort, and background */
#define TARGET_10_4_RX_TIMEOUT_LO_PRI 100
@@ -461,7 +456,6 @@ enum ath10k_hw_4addr_pad {
#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
#define TARGET_10_4_VOW_CONFIG 0
#define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3
-#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400)
#define TARGET_10_4_11AC_TX_MAX_FRAGS 2
#define TARGET_10_4_MAX_PEER_EXT_STATS 16
#define TARGET_10_4_SMART_ANT_CAP 0
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index a7c3d29..fcf101d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4562,9 +4562,9 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work)
if (test_bit(WMI_SERVICE_PEER_CACHING, ar->wmi.svc_map)) {
ar->max_num_peers = TARGET_10_4_NUM_QCACHE_PEERS_MAX +
- TARGET_10_4_NUM_VDEVS;
- ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS +
- TARGET_10_4_NUM_VDEVS;
+ ar->max_num_vdevs;
+ ar->num_active_peers = ar->hw_params.qcache_active_peers +
+ ar->max_num_vdevs;
ar->num_tids = ar->num_active_peers * 2;
ar->max_num_stations = TARGET_10_4_NUM_QCACHE_PEERS_MAX;
}
@@ -5543,8 +5543,8 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar)
__cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS);
config.num_peer_keys = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS);
config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT);
- config.tx_chain_mask = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK);
- config.rx_chain_mask = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK);
+ config.tx_chain_mask = __cpu_to_le32(ar->hw_params.tx_chain_mask);
+ config.rx_chain_mask = __cpu_to_le32(ar->hw_params.rx_chain_mask);
config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
@@ -5575,7 +5575,7 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar)
config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG);
config.gtk_offload_max_vdev =
__cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV);
- config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC);
+ config.num_msdu_desc = __cpu_to_le32(ar->htt.max_num_pending_tx);
config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS);
config.max_peer_ext_stats =
__cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index d85ad78..ddcd3a5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1800,7 +1800,6 @@ enum wmi_channel_change_cause {
#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
-#define WMI_10_4_MAX_SPATIAL_STREAM 4
/* HT Capabilities*/
#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
--
1.8.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread