* Please update board-2.bin for QCA9888
@ 2017-03-03 0:25 Ben Greear
2017-03-09 7:21 ` Valo, Kalle
0 siblings, 1 reply; 6+ messages in thread
From: Ben Greear @ 2017-03-03 0:25 UTC (permalink / raw)
To: ath10k
Newer 9886 (which use the 9888 firmware it seems) NICs will not
boot unless you use the board-2.bin from the codeaura repo.
Kalle: Could you update your repo to the latest from codeaura so that it is
easy to pull the latest board file into LEDE?
If you have reason not to, please let me know.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please update board-2.bin for QCA9888
2017-03-03 0:25 Please update board-2.bin for QCA9888 Ben Greear
@ 2017-03-09 7:21 ` Valo, Kalle
2017-03-09 12:35 ` Ben Greear
0 siblings, 1 reply; 6+ messages in thread
From: Valo, Kalle @ 2017-03-09 7:21 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
Ben Greear <greearb@candelatech.com> writes:
> Newer 9886 (which use the 9888 firmware it seems) NICs will not
> boot unless you use the board-2.bin from the codeaura repo.
>
> Kalle: Could you update your repo to the latest from codeaura so that it is
> easy to pull the latest board file into LEDE?
>
> If you have reason not to, please let me know.
I'm not involved with codeaurora repositories so I don't know what file
you are talking about. What's the URL?
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please update board-2.bin for QCA9888
2017-03-09 7:21 ` Valo, Kalle
@ 2017-03-09 12:35 ` Ben Greear
2017-03-09 12:30 ` Valo, Kalle
2017-04-20 11:18 ` Kalle Valo
0 siblings, 2 replies; 6+ messages in thread
From: Ben Greear @ 2017-03-09 12:35 UTC (permalink / raw)
To: Valo, Kalle; +Cc: ath10k
On 03/08/2017 11:21 PM, Valo, Kalle wrote:
> Ben Greear <greearb@candelatech.com> writes:
>
>> Newer 9886 (which use the 9888 firmware it seems) NICs will not
>> boot unless you use the board-2.bin from the codeaura repo.
>>
>> Kalle: Could you update your repo to the latest from codeaura so that it is
>> easy to pull the latest board file into LEDE?
>>
>> If you have reason not to, please let me know.
>
> I'm not involved with codeaurora repositories so I don't know what file
> you are talking about. What's the URL?
>
git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware
[greearb@ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin
-rw-rw-r--. 1 greearb greearb 60660 Mar 2 16:20 ath10k/QCA9888/hw2.0/board-2.bin
[greearb@ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin
4fffcdf246cea4a4fd5ba67730262563 ath10k/QCA9888/hw2.0/board-2.bin
I actually tested an older version of that file, but I assume the more recent one works
fine too. I don't have a 9886/8 system available for testing at the moment.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please update board-2.bin for QCA9888
2017-03-09 12:35 ` Ben Greear
@ 2017-03-09 12:30 ` Valo, Kalle
2017-03-09 17:52 ` Adrian Chadd
2017-04-20 11:18 ` Kalle Valo
1 sibling, 1 reply; 6+ messages in thread
From: Valo, Kalle @ 2017-03-09 12:30 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
Ben Greear <greearb@candelatech.com> writes:
> On 03/08/2017 11:21 PM, Valo, Kalle wrote:
>> Ben Greear <greearb@candelatech.com> writes:
>>
>>> Newer 9886 (which use the 9888 firmware it seems) NICs will not
>>> boot unless you use the board-2.bin from the codeaura repo.
>>>
>>> Kalle: Could you update your repo to the latest from codeaura so that it is
>>> easy to pull the latest board file into LEDE?
>>>
>>> If you have reason not to, please let me know.
>>
>> I'm not involved with codeaurora repositories so I don't know what file
>> you are talking about. What's the URL?
>>
>
> git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware
>
> [greearb@ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin
> -rw-rw-r--. 1 greearb greearb 60660 Mar 2 16:20 ath10k/QCA9888/hw2.0/board-2.bin
>
> [greearb@ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin
> 4fffcdf246cea4a4fd5ba67730262563 ath10k/QCA9888/hw2.0/board-2.bin
>
> I actually tested an older version of that file, but I assume the more
> recent one works
> fine too. I don't have a 9886/8 system available for testing at the moment.
Ok, thanks. I'll ask internally why nobody has submitted that to me.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please update board-2.bin for QCA9888
2017-03-09 12:30 ` Valo, Kalle
@ 2017-03-09 17:52 ` Adrian Chadd
0 siblings, 0 replies; 6+ messages in thread
From: Adrian Chadd @ 2017-03-09 17:52 UTC (permalink / raw)
To: Valo, Kalle; +Cc: Ben Greear, ath10k
Hi,
Whilst you're at it, the DK07 2G/5G-low and DK07 5G-high/5G-high board
values would be good to add too. They're the same bmi-id though;
there's a jumper to select radio0 as "2G or 5G-high RF path". You'd
have to add them as separate files that people can select at runtime.
:)
I think there's also the file for the DK07+Cascade and DK07+Besra
5G-low NICs that aren't in there by default. Lemme go dig up which
files to use from where.
Thanks!
-adrian
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please update board-2.bin for QCA9888
2017-03-09 12:35 ` Ben Greear
2017-03-09 12:30 ` Valo, Kalle
@ 2017-04-20 11:18 ` Kalle Valo
1 sibling, 0 replies; 6+ messages in thread
From: Kalle Valo @ 2017-04-20 11:18 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
Ben Greear <greearb@candelatech.com> writes:
> On 03/08/2017 11:21 PM, Valo, Kalle wrote:
>> Ben Greear <greearb@candelatech.com> writes:
>>
>>> Newer 9886 (which use the 9888 firmware it seems) NICs will not
>>> boot unless you use the board-2.bin from the codeaura repo.
>>>
>>> Kalle: Could you update your repo to the latest from codeaura so that it is
>>> easy to pull the latest board file into LEDE?
>>>
>>> If you have reason not to, please let me know.
>>
>> I'm not involved with codeaurora repositories so I don't know what file
>> you are talking about. What's the URL?
>>
>
> git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware
>
> [greearb@ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin
> -rw-rw-r--. 1 greearb greearb 60660 Mar 2 16:20 ath10k/QCA9888/hw2.0/board-2.bin
>
> [greearb@ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin
> 4fffcdf246cea4a4fd5ba67730262563 ath10k/QCA9888/hw2.0/board-2.bin
>
> I actually tested an older version of that file, but I assume the more
> recent one works
> fine too. I don't have a 9886/8 system available for testing at the moment.
I got some updated to ath10k-firmware.git some time ago. Please check
and let me know if something is still missing.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-04-20 11:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-03 0:25 Please update board-2.bin for QCA9888 Ben Greear
2017-03-09 7:21 ` Valo, Kalle
2017-03-09 12:35 ` Ben Greear
2017-03-09 12:30 ` Valo, Kalle
2017-03-09 17:52 ` Adrian Chadd
2017-04-20 11:18 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox