* [PATCH 1/4] ath10k: fix the currently supported QCA9377 target version name
2015-11-04 11:53 [PATCH 0/4] update ath10k support for QCA9377 chips Bartosz Markowski
@ 2015-11-04 11:53 ` Bartosz Markowski
2015-11-04 11:53 ` [PATCH 2/4] ath10k: update missing hw_params of QCA9377 hw1.1 Bartosz Markowski
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Bartosz Markowski @ 2015-11-04 11:53 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
When introducing the original QCA9377 support, the chip target
version was wrongly picked. The chip advertising itself with
bmi target value equal to 0x05020001 is in fact a 1.1 revision.
I realized this once I got a real 1.1 hw to play with.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 4 ++--
drivers/net/wireless/ath/ath10k/hw.h | 8 ++++++--
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index aa9bd92ac4ed..c8f6ca284b9d 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -138,8 +138,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
},
{
- .id = QCA9377_HW_1_0_DEV_VERSION,
- .name = "qca9377 hw1.0",
+ .id = QCA9377_HW_1_1_DEV_VERSION,
+ .name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.otp_exe_param = 0,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 39966a05c1cc..01bf2244f54c 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -42,6 +42,8 @@
#define QCA6174_HW_3_0_VERSION 0x05020000
#define QCA6174_HW_3_2_VERSION 0x05030000
+#define QCA9377_HW_1_1_DEV_VERSION 0x05020001
+
enum qca6174_pci_rev {
QCA6174_PCI_REV_1_1 = 0x11,
QCA6174_PCI_REV_1_3 = 0x13,
@@ -60,6 +62,10 @@ enum qca6174_chip_id_rev {
QCA6174_HW_3_2_CHIP_ID_REV = 10,
};
+enum qca9377_chip_id_rev {
+ QCA9377_HW_1_1_CHIP_ID_REV = 0x1,
+};
+
#define QCA6174_HW_2_1_FW_DIR "ath10k/QCA6174/hw2.1"
#define QCA6174_HW_2_1_FW_FILE "firmware.bin"
#define QCA6174_HW_2_1_OTP_FILE "otp.bin"
@@ -85,8 +91,6 @@ enum qca6174_chip_id_rev {
#define QCA99X0_HW_2_0_PATCH_LOAD_ADDR 0x1234
/* QCA9377 1.0 definitions */
-#define QCA9377_HW_1_0_DEV_VERSION 0x05020001
-#define QCA9377_HW_1_0_CHIP_ID_REV 0x1
#define QCA9377_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9377/hw1.0"
#define QCA9377_HW_1_0_FW_FILE "firmware.bin"
#define QCA9377_HW_1_0_OTP_FILE "otp.bin"
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 3fca200b986c..c444b43f183d 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -92,7 +92,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
- { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
+ { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
};
static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
--
2.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/4] ath10k: update missing hw_params of QCA9377 hw1.1
2015-11-04 11:53 [PATCH 0/4] update ath10k support for QCA9377 chips Bartosz Markowski
2015-11-04 11:53 ` [PATCH 1/4] ath10k: fix the currently supported QCA9377 target version name Bartosz Markowski
@ 2015-11-04 11:53 ` Bartosz Markowski
2015-11-04 11:53 ` [PATCH 3/4] ath10k: introduce dev_id to hw_params Bartosz Markowski
2015-11-04 11:53 ` [PATCH 4/4] ath10k: add QCA9377 hw1.0 support Bartosz Markowski
3 siblings, 0 replies; 7+ messages in thread
From: Bartosz Markowski @ 2015-11-04 11:53 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
The uart_pin was incorrectly configured for QCA9377
and the recently added hw_params were omitted.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c8f6ca284b9d..a30d41559134 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -141,8 +141,10 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.id = QCA9377_HW_1_1_DEV_VERSION,
.name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
+ .uart_pin = 6,
.otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
--
2.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/4] ath10k: introduce dev_id to hw_params
2015-11-04 11:53 [PATCH 0/4] update ath10k support for QCA9377 chips Bartosz Markowski
2015-11-04 11:53 ` [PATCH 1/4] ath10k: fix the currently supported QCA9377 target version name Bartosz Markowski
2015-11-04 11:53 ` [PATCH 2/4] ath10k: update missing hw_params of QCA9377 hw1.1 Bartosz Markowski
@ 2015-11-04 11:53 ` Bartosz Markowski
2015-11-04 11:53 ` [PATCH 4/4] ath10k: add QCA9377 hw1.0 support Bartosz Markowski
3 siblings, 0 replies; 7+ messages in thread
From: Bartosz Markowski @ 2015-11-04 11:53 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
A follow up patch introducing a QCA9377 hw1.0 support will need
this device identification helper for an explicit distinction of
HWs, as apparently both QCA6174 hw3.0 and QCA9377 share the same BMI
target version (0x0502000x). For the QCA9377 hw1.1 previously
added we were just lucky we did not overlap with the same chip_id_rev.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 27 ++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/hw.h | 6 ++++++
drivers/net/wireless/ath/ath10k/pci.c | 6 ------
4 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a30d41559134..b80b8f372354 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -51,6 +51,7 @@ MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
.id = QCA988X_HW_2_0_VERSION,
+ .dev_id = QCA988X_2_0_DEVICE_ID,
.name = "qca988x hw2.0",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
@@ -69,6 +70,25 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA6174_HW_2_1_VERSION,
+ .dev_id = QCA6164_2_1_DEVICE_ID,
+ .name = "qca6164 hw2.1",
+ .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .fw = {
+ .dir = QCA6174_HW_2_1_FW_DIR,
+ .fw = QCA6174_HW_2_1_FW_FILE,
+ .otp = QCA6174_HW_2_1_OTP_FILE,
+ .board = QCA6174_HW_2_1_BOARD_DATA_FILE,
+ .board_size = QCA6174_BOARD_DATA_SZ,
+ .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+ },
+ },
+ {
+ .id = QCA6174_HW_2_1_VERSION,
+ .dev_id = QCA6174_2_1_DEVICE_ID,
.name = "qca6174 hw2.1",
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -86,6 +106,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA6174_HW_3_0_VERSION,
+ .dev_id = QCA6174_2_1_DEVICE_ID,
.name = "qca6174 hw3.0",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -103,6 +124,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA6174_HW_3_2_VERSION,
+ .dev_id = QCA6174_2_1_DEVICE_ID,
.name = "qca6174 hw3.2",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -121,6 +143,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
+ .dev_id = QCA99X0_2_0_DEVICE_ID,
.name = "qca99x0 hw2.0",
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
@@ -139,6 +162,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
+ .dev_id = QCA9377_1_0_DEVICE_ID,
.name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -1265,7 +1289,8 @@ static int ath10k_init_hw_params(struct ath10k *ar)
for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) {
hw_params = &ath10k_hw_params_list[i];
- if (hw_params->id == ar->target_version)
+ if (hw_params->id == ar->target_version &&
+ hw_params->dev_id == ar->dev_id)
break;
}
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4a2301589902..622d3816eaf4 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -636,6 +636,7 @@ struct ath10k {
struct ath10k_hw_params {
u32 id;
+ u16 dev_id;
const char *name;
u32 patch_load_addr;
int uart_pin;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 01bf2244f54c..13aacbdc98e6 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -22,6 +22,12 @@
#define ATH10K_FW_DIR "ath10k"
+#define QCA988X_2_0_DEVICE_ID (0x003c)
+#define QCA6164_2_1_DEVICE_ID (0x0041)
+#define QCA6174_2_1_DEVICE_ID (0x003e)
+#define QCA99X0_2_0_DEVICE_ID (0x0040)
+#define QCA9377_1_0_DEVICE_ID (0x0042)
+
/* QCA988X 1.0 definitions (unsupported) */
#define QCA988X_HW_1_0_CHIP_ID_REV 0x0
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index c444b43f183d..14dce2a1b39f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -57,12 +57,6 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
#define ATH10K_PCI_TARGET_WAIT 3000
#define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
-#define QCA988X_2_0_DEVICE_ID (0x003c)
-#define QCA6164_2_1_DEVICE_ID (0x0041)
-#define QCA6174_2_1_DEVICE_ID (0x003e)
-#define QCA99X0_2_0_DEVICE_ID (0x0040)
-#define QCA9377_1_0_DEVICE_ID (0x0042)
-
static const struct pci_device_id ath10k_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
--
2.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 4/4] ath10k: add QCA9377 hw1.0 support
2015-11-04 11:53 [PATCH 0/4] update ath10k support for QCA9377 chips Bartosz Markowski
` (2 preceding siblings ...)
2015-11-04 11:53 ` [PATCH 3/4] ath10k: introduce dev_id to hw_params Bartosz Markowski
@ 2015-11-04 11:53 ` Bartosz Markowski
2015-11-04 17:53 ` Kalle Valo
3 siblings, 1 reply; 7+ messages in thread
From: Bartosz Markowski @ 2015-11-04 11:53 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
Add new BMI target version and chip id revision. Register it
on supported chips list.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 18 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 3 +++
drivers/net/wireless/ath/ath10k/pci.c | 2 ++
3 files changed, 23 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index b80b8f372354..f41329617ae4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -160,6 +160,24 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
},
},
+ {
+ .id = QCA9377_HW_1_0_DEV_VERSION,
+ .dev_id = QCA9377_1_0_DEVICE_ID,
+ .name = "qca9377 hw1.0",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .fw = {
+ .dir = QCA9377_HW_1_0_FW_DIR,
+ .fw = QCA9377_HW_1_0_FW_FILE,
+ .otp = QCA9377_HW_1_0_OTP_FILE,
+ .board = QCA9377_HW_1_0_BOARD_DATA_FILE,
+ .board_size = QCA9377_BOARD_DATA_SZ,
+ .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+ },
+ },
{
.id = QCA9377_HW_1_1_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 13aacbdc98e6..713c2bcea178 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -48,6 +48,8 @@
#define QCA6174_HW_3_0_VERSION 0x05020000
#define QCA6174_HW_3_2_VERSION 0x05030000
+/* QCA9377 target BMI version signatures */
+#define QCA9377_HW_1_0_DEV_VERSION 0x05020000
#define QCA9377_HW_1_1_DEV_VERSION 0x05020001
enum qca6174_pci_rev {
@@ -69,6 +71,7 @@ enum qca6174_chip_id_rev {
};
enum qca9377_chip_id_rev {
+ QCA9377_HW_1_0_CHIP_ID_REV = 0x0,
QCA9377_HW_1_1_CHIP_ID_REV = 0x1,
};
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 14dce2a1b39f..679a3ebb34af 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -86,6 +86,8 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
+
+ { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
};
--
2.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 4/4] ath10k: add QCA9377 hw1.0 support
2015-11-04 11:53 ` [PATCH 4/4] ath10k: add QCA9377 hw1.0 support Bartosz Markowski
@ 2015-11-04 17:53 ` Kalle Valo
2015-11-05 8:54 ` Bartosz Markowski
0 siblings, 1 reply; 7+ messages in thread
From: Kalle Valo @ 2015-11-04 17:53 UTC (permalink / raw)
To: Bartosz Markowski; +Cc: linux-wireless, ath10k
Bartosz Markowski <bartosz.markowski@tieto.com> writes:
> Add new BMI target version and chip id revision. Register it
> on supported chips list.
>
> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
This one has whitespace issues:
drivers/net/wireless/ath/ath10k/core.c:163: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:163: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:164: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:164: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:165: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:165: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:166: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:166: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:167: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:167: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:168: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:168: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:169: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:169: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:170: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:170: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:171: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:171: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/core.c:172: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/core.c:172: please, no spaces at the start of a line
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 4/4] ath10k: add QCA9377 hw1.0 support
2015-11-04 17:53 ` Kalle Valo
@ 2015-11-05 8:54 ` Bartosz Markowski
0 siblings, 0 replies; 7+ messages in thread
From: Bartosz Markowski @ 2015-11-05 8:54 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-wireless@vger.kernel.org, ath10k
On 4 November 2015 at 18:53, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
> Bartosz Markowski <bartosz.markowski@tieto.com> writes:
>
>> Add new BMI target version and chip id revision. Register it
>> on supported chips list.
>>
>> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
>
> This one has whitespace issues:
>
> drivers/net/wireless/ath/ath10k/core.c:163: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:163: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:164: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:164: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:165: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:165: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:166: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:166: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:167: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:167: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:168: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:168: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:169: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:169: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:170: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:170: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:171: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:171: please, no spaces at the start of a line
> drivers/net/wireless/ath/ath10k/core.c:172: code indent should use tabs where possible
> drivers/net/wireless/ath/ath10k/core.c:172: please, no spaces at the start of a line
Sorry about that. I've resend it now.
--
Bartosz
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread