* [PATCH] ath10k: fix aid setup in station mode
@ 2015-03-23 9:57 Michal Kazior
2015-03-30 12:23 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Michal Kazior @ 2015-03-23 9:57 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Michal Kazior
While debugging something else I noticed AID was
set to 0. This could lead to powersave issues in
station mode. Maybe this isn't really necessary
but set it properly just to be sure.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 506e886..f2b4a49 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1605,12 +1605,18 @@ static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
struct wmi_peer_assoc_complete_arg *arg)
{
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ u32 aid;
lockdep_assert_held(&ar->conf_mutex);
+ if (vif->type == NL80211_IFTYPE_STATION)
+ aid = vif->bss_conf.aid;
+ else
+ aid = sta->aid;
+
ether_addr_copy(arg->addr, sta->addr);
arg->vdev_id = arvif->vdev_id;
- arg->peer_aid = sta->aid;
+ arg->peer_aid = aid;
arg->peer_flags |= WMI_PEER_AUTH;
arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
arg->peer_num_spatial_streams = 1;
--
2.1.4
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-03-30 12:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-03-23 9:57 [PATCH] ath10k: fix aid setup in station mode Michal Kazior
2015-03-30 12:23 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox