From: Vincent Tremblay <vincent@vtremblay.dev>
To: ath10k@lists.infradead.org
Cc: vincent@vtremblay.dev
Subject: Re: [PATCH] dt-bindings: ath10k: fix qcom,coexist-support documentation
Date: Sat, 31 Dec 2022 09:15:41 -0500 [thread overview]
Message-ID: <Y7BEDRxhGlM+bUJO@vtremblay> (raw)
In-Reply-To: <20221231044752.3379895-1-vincent@vtremblay.dev>
On Fri, Dec 30, 2022 at 11:47:52PM -0500, Vincent Tremblay wrote:
> The driver is reading the value using the function
> "of_property_read_u8", which is expecting the data to be
> represented on 8 bits.
>
> By default, the value specified in the DT is saved using a 32 bits
> format, which cause the driver to read "0" instead of "1".
>
> To make the driver work properly, the DT should specify the right
> data representation to use.
>
> Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
> ---
> .../devicetree/bindings/net/wireless/qcom,ath10k.txt | 6 +++---
> drivers/net/wireless/ath/ath10k/core.c | 4 ++--
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> index b61c2d5a0ff7..b71e97cb6c24 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> @@ -92,8 +92,8 @@ Optional properties:
> - qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
> mapped msa region.
>
> -- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
> - support by the hardware.
> +- qcom,coexist-support : should contain a 8 bits value representing either
> + "0" or "1" to indicate coex support by the hardware.
> - qcom,coexist-gpio-pin : gpio pin number information to support coex
> which will be used by wifi firmware.
>
> @@ -176,7 +176,7 @@ wifi0: wifi@a000000 {
> qcom,msi_addr = <0x0b006040>;
> qcom,msi_base = <0x40>;
> qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
> - qcom,coexist-support = <1>;
> + qcom,coexist-support = /bits/ 8 <1>;
> qcom,coexist-gpio-pin = <0x33>;
> };
> --
> 2.37.2
>
The more I think about this, the more I think it is probably better to
change the code to read the "qcom,coexist-support" property as a u32
instead of a u8. This would simplify the DT syntax and make it easier to
write.
Please ignore this patch, I will create a new one to modify the driver.
Regards,
Vincent Tremblay
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
prev parent reply other threads:[~2022-12-31 14:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-31 4:47 [PATCH] dt-bindings: ath10k: fix qcom,coexist-support documentation Vincent Tremblay
2022-12-31 4:58 ` [PATCH v2] " Vincent Tremblay
2022-12-31 14:15 ` Vincent Tremblay [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y7BEDRxhGlM+bUJO@vtremblay \
--to=vincent@vtremblay.dev \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox