From: John Crispin <john@phrozen.org>
To: Johannes Berg <johannes@sipsolutions.net>,
Kalle Valo <kvalo@codeaurora.org>
Cc: John Crispin <john@phrozen.org>,
linux-wireless@vger.kernel.org,
Rajkumar Manoharan <rmanohar@qti.qualcomm.com>,
Srini Kode <skode@qti.qualcomm.com>,
Shashidhar Lakkavalli <slakkavalli@datto.com>,
ath11k@lists.infradead.org
Subject: [PATCH 1/3] mac80211: allow turning TWT responder support on and off via netlink
Date: Fri, 26 Apr 2019 10:42:42 +0200 [thread overview]
Message-ID: <20190426084244.28098-2-john@phrozen.org> (raw)
In-Reply-To: <20190426084244.28098-1-john@phrozen.org>
Allow the userland daemon to en/disable TWT support for an AP.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/cfg80211.h | 2 ++
include/net/mac80211.h | 5 +++++
include/uapi/linux/nl80211.h | 4 ++++
net/mac80211/cfg.c | 6 ++++++
net/wireless/nl80211.c | 5 +++++
5 files changed, 22 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bb307a11ee63..8a20f5a42977 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1511,6 +1511,7 @@ struct mpath_info {
* (u16 = opmode, -1 = do not change)
* @p2p_ctwindow: P2P CT Window (-1 = no change)
* @p2p_opp_ps: P2P opportunistic PS (-1 = no change)
+ * @twt_responder: HE Target Wait Time support.
*/
struct bss_parameters {
int use_cts_prot;
@@ -1521,6 +1522,7 @@ struct bss_parameters {
int ap_isolate;
int ht_opmode;
s8 p2p_ctwindow, p2p_opp_ps;
+ int twt_responder;
};
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ac2ed8ec662b..87a6e149abda 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -317,6 +317,7 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
* @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
* functionality changed for this BSS (AP mode).
+ * @BSS_CHANGED_TWT: TWT enable status changed
*
*/
enum ieee80211_bss_change {
@@ -347,6 +348,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_KEEP_ALIVE = 1<<24,
BSS_CHANGED_MCAST_RATE = 1<<25,
BSS_CHANGED_FTM_RESPONDER = 1<<26,
+ BSS_CHANGED_TWT = 1<<27,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -504,6 +506,8 @@ struct ieee80211_ftm_responder_params {
* @he_support: does this BSS support HE
* @twt_requester: does this BSS support TWT requester (relevant for managed
* mode only, set if the AP advertises TWT responder role)
+ * @twt_responder: does this BSS support TWT responder (relevant for AP
+ * mode only, set if the AP advertises TWT responder role)
* @assoc: association status
* @ibss_joined: indicates whether this station is part of an IBSS
* or not
@@ -611,6 +615,7 @@ struct ieee80211_bss_conf {
u16 frame_time_rts_th;
bool he_support;
bool twt_requester;
+ bool twt_responder;
/* association related data */
bool assoc, ibss_joined;
bool ibss_creator;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86ee286e..ba1f69751a4a 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2308,6 +2308,8 @@ enum nl80211_commands {
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
* scheduler.
*
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2759,6 +2761,8 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_TWT_RESPONDER,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 09dd1c2860fc..a66600bf9cef 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2176,6 +2176,12 @@ static int ieee80211_change_bss(struct wiphy *wiphy,
changed |= BSS_CHANGED_P2P_PS;
}
+ if (params->twt_responder >= 0) {
+ sdata->vif.bss_conf.twt_responder =
+ params->twt_responder;
+ changed |= BSS_CHANGED_TWT;
+ }
+
ieee80211_bss_info_change_notify(sdata, changed);
return 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 25a9e3b5c154..4f98ee0a98f3 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -6105,6 +6105,7 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
params.ht_opmode = -1;
params.p2p_ctwindow = -1;
params.p2p_opp_ps = -1;
+ params.twt_responder = -1;
if (info->attrs[NL80211_ATTR_BSS_CTS_PROT])
params.use_cts_prot =
@@ -6149,6 +6150,10 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
+ if (info->attrs[NL80211_ATTR_TWT_RESPONDER])
+ params.twt_responder =
+ nla_get_u8(info->attrs[NL80211_ATTR_TWT_RESPONDER]);
+
if (!rdev->ops->change_bss)
return -EOPNOTSUPP;
--
2.11.0
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2019-04-26 8:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-26 8:42 [PATCH 0/3] mac80211: notify the driver when it should enable TWT John Crispin
2019-04-26 8:42 ` John Crispin [this message]
2019-04-26 8:49 ` [PATCH 1/3] mac80211: allow turning TWT responder support on and off via netlink Johannes Berg
2019-04-26 8:42 ` [PATCH 2/3] mac80211: dynamically turn TWT requester support on and off John Crispin
2019-04-26 8:42 ` [PATCH 3/3] ath11k: add TWT support John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190426084244.28098-2-john@phrozen.org \
--to=john@phrozen.org \
--cc=ath11k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=rmanohar@qti.qualcomm.com \
--cc=skode@qti.qualcomm.com \
--cc=slakkavalli@datto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox