Steam Deck OLED

Steam Deck OLED

[Jonathan Silverblood]

I'm trying to run my preferred flavour of linux on the new steam deck 
oled and the wireless/bluetooth is not recognized.Based on some dmesg 
output and casual searching I suspect it's the firmware files that don't 
know the specific configuration used in this device. I verified it was 
working on steamos before I re-installed, so I thought I'd send my dmesg 
output here and see if there's anything else I can do to help.

ath11k_pci 0000:03:00.0: chip_id 0x12 chip_family 0xb board_id 0x309 
soc_id 0x400c1211
ath11k_pci 0000:03:00.0: fw_version 0x110b196e fw_build_timestamp 
2022-12-22 12:54 fw_build_id 
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
Loading firmware: ath11k/WCN6855/hw2.1/regdb.bin
Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
Loading firmware: ath11k/WCN6855/hw2.1/board.bin
ath11k_pci 0000:03:00.0: failed to fetch board data for 
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=18,qmi-board-id=777 
from ath11k/WCN6855/hw2.1/board-2.bin
ath11k_pci 0000:03:00.0: failed to fetch board.bin from WCN6855/hw2.1
ath11k_pci 0000:03:00.0: qmi failed to fetch board file: -2
ath11k_pci 0000:03:00.0: failed to load board data file: -2


Here's the lspci output as well, just in case:

03:00.0 Network controller: Qualcomm Technologies, Inc QCNFA765 Wireless 
Network Adapter (rev 01)
         DeviceName: Broadcom 5762
         Subsystem: Qualcomm Technologies, Inc QCNFA765 Wireless Network 
Adapter
         !!! Unknown header type 7f
         Interrupt: pin ? routed to IRQ 67
         Region 0: Memory at 80000000 (64-bit, non-prefetchable) 
[size=2M]
         Kernel driver in use: ath11k_pci
         Kernel modules: ath11k_pci

// Jonathan

Re: Steam Deck OLED

[Kalle Valo]

Jonathan Silverblood <jonathan@silverblood.se> writes:

> I'm trying to run my preferred flavour of linux on the new steam deck
> oled and the wireless/bluetooth is not recognized.Based on some dmesg
> output and casual searching I suspect it's the firmware files that
> don't know the specific configuration used in this device. I verified
> it was working on steamos before I re-installed, so I thought I'd send
> my dmesg output here and see if there's anything else I can do to
> help.
>
> ath11k_pci 0000:03:00.0: chip_id 0x12 chip_family 0xb board_id 0x309
> soc_id 0x400c1211
> ath11k_pci 0000:03:00.0: fw_version 0x110b196e fw_build_timestamp
> 2022-12-22 12:54 fw_build_id
> WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
> Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
> Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
> Loading firmware: ath11k/WCN6855/hw2.1/regdb.bin
> Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
> Loading firmware: ath11k/WCN6855/hw2.1/board-2.bin
> Loading firmware: ath11k/WCN6855/hw2.1/board.bin
> ath11k_pci 0000:03:00.0: failed to fetch board data for
> bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=18,qmi-board-id=777
> from ath11k/WCN6855/hw2.1/board-2.bin
> ath11k_pci 0000:03:00.0: failed to fetch board.bin from WCN6855/hw2.1
> ath11k_pci 0000:03:00.0: qmi failed to fetch board file: -2
> ath11k_pci 0000:03:00.0: failed to load board data file: -2

The board file for your device is missing from board-2.bin. Could you
please file a report to bugzilla.kernel.org so that it's easier to track
the issue:

https://wireless.wiki.kernel.org/en/users/drivers/ath11k/bugreport

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches