* ath11k: 512 client support on QCN9074
@ 2024-01-18 10:30 Alexander Wilhelm
2024-01-18 10:32 ` Robert Marko
2024-01-18 10:36 ` Kalle Valo
0 siblings, 2 replies; 4+ messages in thread
From: Alexander Wilhelm @ 2024-01-18 10:30 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath11k
Hi kvalo,
The QCN9074 module with the ath11k driver currently only supports 128 clients. It should actually be able to support 512, shouldn't it? If so, is there a firmware restriction because of this, etc?
Best regards
Alexander Wilhelm
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath11k: 512 client support on QCN9074
2024-01-18 10:30 ath11k: 512 client support on QCN9074 Alexander Wilhelm
@ 2024-01-18 10:32 ` Robert Marko
2024-01-25 8:56 ` Alexander Wilhelm
2024-01-18 10:36 ` Kalle Valo
1 sibling, 1 reply; 4+ messages in thread
From: Robert Marko @ 2024-01-18 10:32 UTC (permalink / raw)
To: Alexander Wilhelm; +Cc: Kalle Valo, ath11k
On Thu, Jan 18, 2024 at 11:31 AM Alexander Wilhelm
<alexander.wilhelm@westermo.com> wrote:
>
> Hi kvalo,
>
> The QCN9074 module with the ath11k driver currently only supports 128 clients. It should actually be able to support 512, shouldn't it? If so, is there a firmware restriction because of this, etc?
For that you need to change the FW mode to 0 as I think it currently
defaults to 2 to save on memory.
Regards,
Robert
>
>
> Best regards
> Alexander Wilhelm
>
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath11k: 512 client support on QCN9074
2024-01-18 10:30 ath11k: 512 client support on QCN9074 Alexander Wilhelm
2024-01-18 10:32 ` Robert Marko
@ 2024-01-18 10:36 ` Kalle Valo
1 sibling, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2024-01-18 10:36 UTC (permalink / raw)
To: Alexander Wilhelm; +Cc: ath11k
Alexander Wilhelm <alexander.wilhelm@westermo.com> writes:
> The QCN9074 module with the ath11k driver currently only supports 128
> clients. It should actually be able to support 512, shouldn't it? If
> so, is there a firmware restriction because of this, etc?
IIRC increasing station limit means that we have to reduce memory usage
somewhere else and we don't have a good dynamic way to change those
values in ath11k right now. Hopefully someone else answers who knows
this better.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath11k: 512 client support on QCN9074
2024-01-18 10:32 ` Robert Marko
@ 2024-01-25 8:56 ` Alexander Wilhelm
0 siblings, 0 replies; 4+ messages in thread
From: Alexander Wilhelm @ 2024-01-25 8:56 UTC (permalink / raw)
To: Robert Marko; +Cc: ath11k
On 18.01.24 11:32, Robert Marko wrote:
> On Thu, Jan 18, 2024 at 11:31 AM Alexander Wilhelm
> <alexander.wilhelm@westermo.com> wrote:
>>
>> Hi kvalo,
>>
>> The QCN9074 module with the ath11k driver currently only supports 128 clients. It should actually be able to support 512, shouldn't it? If so, is there a firmware restriction because of this, etc?
>
> For that you need to change the FW mode to 0 as I think it currently
> defaults to 2 to save on memory.
Thanks, it worked. I am able to use up to 512 clients.
Best regards
Alexander Wilhelm
>
> Regards,
> Robert
>>
>>
>> Best regards
>> Alexander Wilhelm
>>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-01-25 8:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-18 10:30 ath11k: 512 client support on QCN9074 Alexander Wilhelm
2024-01-18 10:32 ` Robert Marko
2024-01-25 8:56 ` Alexander Wilhelm
2024-01-18 10:36 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox