[PATCH AUTOSEL 6.14 292/642] wifi: ath12k: Report proper tx completion status to mac80211

[PATCH AUTOSEL 6.14 292/642] wifi: ath12k: Report proper tx completion status to mac80211

[Sasha Levin]

From: Vinith Kumar R <quic_vinithku@quicinc.com>

[ Upstream commit d2d9c9b8de725e1006d3aa3d18678a732f5d3584 ]

Currently Tx completion for few exception packets are received from
firmware and the tx status updated to mac80211. The tx status values of
HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP and HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL
are considered as tx failure and reported as tx failure to mac80211.
But these failure status is due to internal firmware tx drop and these
packets were not tried to transmit in the air.
In case of mesh this invalid tx status report might trigger mpath broken
issue due to increase in mpath fail average.
So do not report these tx status as tx failure instead free the skb
by calling ieee80211_free_txskb(), and that will be accounted as dropped
frame.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241122173432.2064858-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index 1fffabaca527a..75608ae027afe 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -560,13 +560,13 @@ ath12k_dp_tx_process_htt_tx_complete(struct ath12k_base *ab,
 
 	switch (wbm_status) {
 	case HAL_WBM_REL_HTT_TX_COMP_STATUS_OK:
-	case HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP:
-	case HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL:
 		ts.acked = (wbm_status == HAL_WBM_REL_HTT_TX_COMP_STATUS_OK);
 		ts.ack_rssi = le32_get_bits(status_desc->info2,
 					    HTT_TX_WBM_COMP_INFO2_ACK_RSSI);
 		ath12k_dp_tx_htt_tx_complete_buf(ab, msdu, tx_ring, &ts);
 		break;
+	case HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP:
+	case HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL:
 	case HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ:
 	case HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT:
 		ath12k_dp_tx_free_txbuf(ab, msdu, mac_id, tx_ring);
-- 
2.39.5

[PATCH AUTOSEL 6.14 315/642] wifi: ath12k: Improve BSS discovery with hidden SSID in 6 GHz band

[Sasha Levin]

From: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>

[ Upstream commit 27d38bdfd416f4db70e09c3bef3b030c86fd235a ]

Currently, sometimes, the station is unable to identify the configured
AP SSID in its scan results when the AP is not broadcasting its name
publicly and has a hidden SSID.

Currently, channel dwell time for an ath12k station is 30 ms. Sometimes,
station can send broadcast probe request to AP close to the end of dwell
time. In some of these cases, before AP sends a response to the received
probe request, the dwell time on the station side would come to an end.
So, the station will move to scan next channel and will not be able to
acknowledge the unicast probe response.

Resolve this issue by increasing station's channel dwell time to 70 ms,
so that the it remains on the same channel for a longer period. This
would increase the station's chance of receiving probe response from the
AP. The station will then send a response acknowledgment back to the AP,
thus leading to successful scan and BSS discovery.

With an increased dwell time, scan would take longer than it takes now.
But, this fix is an improvement for hidden SSID scan issue.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250207060005.153835-1-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/wmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 7a87777e0a047..9cd7ceae5a4f8 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -2373,8 +2373,8 @@ void ath12k_wmi_start_scan_init(struct ath12k *ar,
 	arg->dwell_time_active = 50;
 	arg->dwell_time_active_2g = 0;
 	arg->dwell_time_passive = 150;
-	arg->dwell_time_active_6g = 40;
-	arg->dwell_time_passive_6g = 30;
+	arg->dwell_time_active_6g = 70;
+	arg->dwell_time_passive_6g = 70;
 	arg->min_rest_time = 50;
 	arg->max_rest_time = 500;
 	arg->repeat_probe_time = 0;
-- 
2.39.5

[PATCH AUTOSEL 6.14 494/642] wifi: ath12k: Enable MLO setup ready and teardown commands for single split-phy device

[Sasha Levin]

From: Aaradhana Sahu <quic_aarasahu@quicinc.com>

[ Upstream commit 5cec2d86c7f4242fb30a696d8e6fd48109bf3e8f ]

When multi-link operation(MLO) is enabled through follow-up patches in
the single split-phy device, the firmware expects hardware links
(hw_links) information from the driver.

If driver does not send WMI multi-link setup and ready command to the
firmware during MLO setup for single split-phy device, the firmware will
be unaware of the hw_links component of the multi-link operation. This may
lead to firmware assert during multi-link association.

Therefore, enable WMI setup, ready and teardown commands for single
split-phy PCI device.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250207050327.360987-2-quic_aarasahu@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/core.c | 33 +++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath12k/core.h |  1 +
 drivers/net/wireless/ath/ath12k/mac.c  |  9 +++++++
 3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index 212cd935e60a0..ffd173ff7b08c 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -887,10 +887,41 @@ static void ath12k_core_hw_group_stop(struct ath12k_hw_group *ag)
 	ath12k_mac_destroy(ag);
 }
 
+u8 ath12k_get_num_partner_link(struct ath12k *ar)
+{
+	struct ath12k_base *partner_ab, *ab = ar->ab;
+	struct ath12k_hw_group *ag = ab->ag;
+	struct ath12k_pdev *pdev;
+	u8 num_link = 0;
+	int i, j;
+
+	lockdep_assert_held(&ag->mutex);
+
+	for (i = 0; i < ag->num_devices; i++) {
+		partner_ab = ag->ab[i];
+
+		for (j = 0; j < partner_ab->num_radios; j++) {
+			pdev = &partner_ab->pdevs[j];
+
+			/* Avoid the self link */
+			if (ar == pdev->ar)
+				continue;
+
+			num_link++;
+		}
+	}
+
+	return num_link;
+}
+
 static int __ath12k_mac_mlo_ready(struct ath12k *ar)
 {
+	u8 num_link = ath12k_get_num_partner_link(ar);
 	int ret;
 
+	if (num_link == 0)
+		return 0;
+
 	ret = ath12k_wmi_mlo_ready(ar);
 	if (ret) {
 		ath12k_err(ar->ab, "MLO ready failed for pdev %d: %d\n",
@@ -932,7 +963,7 @@ static int ath12k_core_mlo_setup(struct ath12k_hw_group *ag)
 {
 	int ret, i;
 
-	if (!ag->mlo_capable || ag->num_devices == 1)
+	if (!ag->mlo_capable)
 		return 0;
 
 	ret = ath12k_mac_mlo_setup(ag);
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index ee595794a7aee..6325ac493f82c 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -1084,6 +1084,7 @@ int ath12k_core_resume(struct ath12k_base *ab);
 int ath12k_core_suspend(struct ath12k_base *ab);
 int ath12k_core_suspend_late(struct ath12k_base *ab);
 void ath12k_core_hw_group_unassign(struct ath12k_base *ab);
+u8 ath12k_get_num_partner_link(struct ath12k *ar);
 
 const struct firmware *ath12k_core_firmware_request(struct ath12k_base *ab,
 						    const char *filename);
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 9c3e66dbe0c3b..9123ffab55b52 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -11140,6 +11140,9 @@ static int __ath12k_mac_mlo_setup(struct ath12k *ar)
 		}
 	}
 
+	if (num_link == 0)
+		return 0;
+
 	mlo.group_id = cpu_to_le32(ag->id);
 	mlo.partner_link_id = partner_link_id;
 	mlo.num_partner_links = num_link;
@@ -11169,10 +11172,16 @@ static int __ath12k_mac_mlo_teardown(struct ath12k *ar)
 {
 	struct ath12k_base *ab = ar->ab;
 	int ret;
+	u8 num_link;
 
 	if (test_bit(ATH12K_FLAG_RECOVERY, &ab->dev_flags))
 		return 0;
 
+	num_link = ath12k_get_num_partner_link(ar);
+
+	if (num_link == 0)
+		return 0;
+
 	ret = ath12k_wmi_mlo_teardown(ar);
 	if (ret) {
 		ath12k_warn(ab, "failed to send MLO teardown WMI command for pdev %d: %d\n",
-- 
2.39.5

[PATCH AUTOSEL 6.14 495/642] wifi: ath12k: use arvif instead of link_conf in ath12k_mac_set_key()

[Sasha Levin]

From: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>

[ Upstream commit 00e4dc11695d48322780812b503314682659e98b ]

Currently, in ath12k_mac_set_key(), if sta is not present, the address is
retrieved from link_conf's bssid or addr member, depending on the interface
type.

When operating as an ML station and during shutdown, link_conf will not be
available. This can result in the following error:

ath12k_pci 0004:01:00.0: unable to access bss link conf in set key for vif AA:BB:CC:DD:EE:FF link 1

The primary purpose of accessing link_conf is to obtain the address for
finding the peer. However, since arvif is always valid in this call, it can
be used instead.

Add change to use arvif instead of link_conf.

A subsequent change will expose this issue but since tear down will give
error, this is included first.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande

Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-5-764fb5973c1a@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/mac.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 9123ffab55b52..95ad9fefbdfcd 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -4534,9 +4534,6 @@ static int ath12k_mac_set_key(struct ath12k *ar, enum set_key_cmd cmd,
 			      struct ath12k_link_sta *arsta,
 			      struct ieee80211_key_conf *key)
 {
-	struct ath12k_vif *ahvif = arvif->ahvif;
-	struct ieee80211_vif *vif = ath12k_ahvif_to_vif(ahvif);
-	struct ieee80211_bss_conf *link_conf;
 	struct ieee80211_sta *sta = NULL;
 	struct ath12k_base *ab = ar->ab;
 	struct ath12k_peer *peer;
@@ -4553,19 +4550,10 @@ static int ath12k_mac_set_key(struct ath12k *ar, enum set_key_cmd cmd,
 	if (test_bit(ATH12K_FLAG_HW_CRYPTO_DISABLED, &ab->dev_flags))
 		return 1;
 
-	link_conf = ath12k_mac_get_link_bss_conf(arvif);
-	if (!link_conf) {
-		ath12k_warn(ab, "unable to access bss link conf in set key for vif %pM link %u\n",
-			    vif->addr, arvif->link_id);
-		return -ENOLINK;
-	}
-
 	if (sta)
 		peer_addr = arsta->addr;
-	else if (ahvif->vdev_type == WMI_VDEV_TYPE_STA)
-		peer_addr = link_conf->bssid;
 	else
-		peer_addr = link_conf->addr;
+		peer_addr = arvif->bssid;
 
 	key->hw_key_idx = key->keyidx;
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 496/642] wifi: ath12k: fix the ampdu id fetch in the HAL_RX_MPDU_START TLV

[Sasha Levin]

From: P Praneesh <quic_ppranees@quicinc.com>

[ Upstream commit dff4f278ee1ef12d822b7ed2a1048d27037209bb ]

Currently, ampdu id is update with peer id mask which is incorrect.
Therefore, update the ampdu id with PPDU id mask value. Also move
the ampdu_id field inside the user stats since it is a user id based
statistics.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_mon.c | 16 ++++++++++------
 drivers/net/wireless/ath/ath12k/hal_rx.h |  3 ++-
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/dp_mon.c b/drivers/net/wireless/ath/ath12k/dp_mon.c
index b952e79179d01..f23fee7055abc 100644
--- a/drivers/net/wireless/ath/ath12k/dp_mon.c
+++ b/drivers/net/wireless/ath/ath12k/dp_mon.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include "dp_mon.h"
@@ -655,6 +655,11 @@ ath12k_dp_mon_rx_parse_status_tlv(struct ath12k_base *ab,
 		if (userid < HAL_MAX_UL_MU_USERS) {
 			struct hal_rx_user_status *rxuser_stats =
 				&ppdu_info->userstats[userid];
+
+			if (ppdu_info->num_mpdu_fcs_ok > 1 ||
+			    ppdu_info->num_mpdu_fcs_err > 1)
+				ppdu_info->userstats[userid].ampdu_present = true;
+
 			ppdu_info->num_users += 1;
 
 			ath12k_dp_mon_rx_handle_ofdma_info(eu_stats, rxuser_stats);
@@ -755,8 +760,8 @@ ath12k_dp_mon_rx_parse_status_tlv(struct ath12k_base *ab,
 		if (userid < HAL_MAX_UL_MU_USERS) {
 			info[0] = __le32_to_cpu(mpdu_start->info0);
 			ppdu_info->userid = userid;
-			ppdu_info->ampdu_id[userid] =
-				u32_get_bits(info[0], HAL_RX_MPDU_START_INFO1_PEERID);
+			ppdu_info->userstats[userid].ampdu_id =
+				u32_get_bits(info[0], HAL_RX_MPDU_START_INFO0_PPDU_ID);
 		}
 
 		break;
@@ -956,15 +961,14 @@ static void ath12k_dp_mon_update_radiotap(struct ath12k *ar,
 {
 	struct ieee80211_supported_band *sband;
 	u8 *ptr = NULL;
-	u16 ampdu_id = ppduinfo->ampdu_id[ppduinfo->userid];
 
 	rxs->flag |= RX_FLAG_MACTIME_START;
 	rxs->signal = ppduinfo->rssi_comb + ATH12K_DEFAULT_NOISE_FLOOR;
 	rxs->nss = ppduinfo->nss + 1;
 
-	if (ampdu_id) {
+	if (ppduinfo->userstats[ppduinfo->userid].ampdu_present) {
 		rxs->flag |= RX_FLAG_AMPDU_DETAILS;
-		rxs->ampdu_reference = ampdu_id;
+		rxs->ampdu_reference = ppduinfo->userstats[ppduinfo->userid].ampdu_id;
 	}
 
 	if (ppduinfo->he_mu_flags) {
diff --git a/drivers/net/wireless/ath/ath12k/hal_rx.h b/drivers/net/wireless/ath/ath12k/hal_rx.h
index 54f3eaeca8bb9..55b2dd5b76f6b 100644
--- a/drivers/net/wireless/ath/ath12k/hal_rx.h
+++ b/drivers/net/wireless/ath/ath12k/hal_rx.h
@@ -146,6 +146,8 @@ struct hal_rx_user_status {
 	u32 mpdu_fcs_ok_bitmap[HAL_RX_NUM_WORDS_PER_PPDU_BITMAP];
 	u32 mpdu_ok_byte_count;
 	u32 mpdu_err_byte_count;
+	bool ampdu_present;
+	u16 ampdu_id;
 };
 
 #define HAL_MAX_UL_MU_USERS	37
@@ -230,7 +232,6 @@ struct hal_rx_mon_ppdu_info {
 	u8 addr4[ETH_ALEN];
 	struct hal_rx_user_status userstats[HAL_MAX_UL_MU_USERS];
 	u8 userid;
-	u16 ampdu_id[HAL_MAX_UL_MU_USERS];
 	bool first_msdu_in_mpdu;
 	bool is_ampdu;
 	u8 medium_prot_type;
-- 
2.39.5

[PATCH AUTOSEL 6.14 497/642] wifi: ath12k: Update the peer id in PPDU end user stats TLV

[Sasha Levin]

From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>

[ Upstream commit 0cded0e413468183a3b2dd445ab3bdc4d4375967 ]

Currently, peer id get reported in the PPDU end user TLV tag. But the
monitor status handler is inherited from ath11k, but it was not updated
to incorporate the changes made to ath12k 802.11be hardware architecture.
Therefore, update the peer id from the PPDU end user TLV data to get latest
peer id update, it helps to populate accurate peer information on the
statistics data.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250206013854.174765-6-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_mon.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/dp_mon.c b/drivers/net/wireless/ath/ath12k/dp_mon.c
index f23fee7055abc..8737dc8fea354 100644
--- a/drivers/net/wireless/ath/ath12k/dp_mon.c
+++ b/drivers/net/wireless/ath/ath12k/dp_mon.c
@@ -638,6 +638,9 @@ ath12k_dp_mon_rx_parse_status_tlv(struct ath12k_base *ab,
 		ppdu_info->num_mpdu_fcs_err =
 			u32_get_bits(info[0],
 				     HAL_RX_PPDU_END_USER_STATS_INFO0_MPDU_CNT_FCS_ERR);
+		ppdu_info->peer_id =
+			u32_get_bits(info[0], HAL_RX_PPDU_END_USER_STATS_INFO0_PEER_ID);
+
 		switch (ppdu_info->preamble_type) {
 		case HAL_RX_PREAMBLE_11N:
 			ppdu_info->ht_flags = 1;
-- 
2.39.5

[PATCH AUTOSEL 6.14 569/642] wifi: ath12k: Avoid napi_sync() before napi_enable()

[Sasha Levin]

From: Avula Sri Charan <quic_asrichar@quicinc.com>

[ Upstream commit 268c73d470a5790a492a2fc2ded084b909d144f3 ]

In case of MHI error a reset work will be queued which will try
napi_disable() after napi_synchronize().

As the napi will be only enabled after qmi_firmware_ready event,
trying napi_synchronize() before napi_enable() will result in
indefinite sleep in case of a firmware crash in QMI init sequence.

To avoid this, introduce napi_enabled flag to check if napi is enabled
or not before calling napi_synchronize().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/core.h |  1 +
 drivers/net/wireless/ath/ath12k/pci.c  | 13 ++++++++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 6325ac493f82c..2699c383fc4c9 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -166,6 +166,7 @@ struct ath12k_ext_irq_grp {
 	u32 num_irq;
 	u32 grp_id;
 	u64 timestamp;
+	bool napi_enabled;
 	struct napi_struct napi;
 	struct net_device *napi_ndev;
 };
diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index ee14b84845487..895b2314d1d58 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -483,8 +483,11 @@ static void __ath12k_pci_ext_irq_disable(struct ath12k_base *ab)
 
 		ath12k_pci_ext_grp_disable(irq_grp);
 
-		napi_synchronize(&irq_grp->napi);
-		napi_disable(&irq_grp->napi);
+		if (irq_grp->napi_enabled) {
+			napi_synchronize(&irq_grp->napi);
+			napi_disable(&irq_grp->napi);
+			irq_grp->napi_enabled = false;
+		}
 	}
 }
 
@@ -1114,7 +1117,11 @@ void ath12k_pci_ext_irq_enable(struct ath12k_base *ab)
 	for (i = 0; i < ATH12K_EXT_IRQ_GRP_NUM_MAX; i++) {
 		struct ath12k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
 
-		napi_enable(&irq_grp->napi);
+		if (!irq_grp->napi_enabled) {
+			napi_enable(&irq_grp->napi);
+			irq_grp->napi_enabled = true;
+		}
+
 		ath12k_pci_ext_grp_enable(irq_grp);
 	}
 
-- 
2.39.5

[PATCH AUTOSEL 6.14 592/642] wifi: ath12k: fix ath12k_hal_tx_cmd_ext_desc_setup() info1 override

[Sasha Levin]

From: Nicolas Escande <nico.escande@gmail.com>

[ Upstream commit df11edfba49e5fb69f4c9e7cb76082b89c417f78 ]

Since inception there is an obvious typo laying around in
ath12k_hal_tx_cmd_ext_desc_setup(). Instead of initializing + adding
flags to tcl_ext_cmd->info1, we initialize + override. This will be needed
in the future to make broadcast frames work with ethernet encapsulation.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250127071306.1454699-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index 75608ae027afe..a39bfb959797a 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -117,7 +117,7 @@ static void ath12k_hal_tx_cmd_ext_desc_setup(struct ath12k_base *ab,
 			       le32_encode_bits(ti->data_len,
 						HAL_TX_MSDU_EXT_INFO1_BUF_LEN);
 
-	tcl_ext_cmd->info1 = le32_encode_bits(1, HAL_TX_MSDU_EXT_INFO1_EXTN_OVERRIDE) |
+	tcl_ext_cmd->info1 |= le32_encode_bits(1, HAL_TX_MSDU_EXT_INFO1_EXTN_OVERRIDE) |
 				le32_encode_bits(ti->encap_type,
 						 HAL_TX_MSDU_EXT_INFO1_ENCAP_TYPE) |
 				le32_encode_bits(ti->encrypt_type,
-- 
2.39.5

[PATCH AUTOSEL 6.14 596/642] wifi: ath12k: Fetch regdb.bin file from board-2.bin

[Sasha Levin]

From: Aaradhana Sahu <quic_aarasahu@quicinc.com>

[ Upstream commit 24f587572acf7509127dbdfcbf1b681ef84eeba0 ]

Currently, ath12k_core_fetch_regdb() finds regdb.bin file through
board id's but in board-2.bin file regdb.bin file is present with
default board id because of which regdb.bin is not fetched.

Add support to fetch regdb.bin file from board-2.bin through
default board id.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250116032835.118397-1-quic_aarasahu@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/core.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index ffd173ff7b08c..d0aed4c56050d 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -173,7 +173,7 @@ EXPORT_SYMBOL(ath12k_core_resume);
 
 static int __ath12k_core_create_board_name(struct ath12k_base *ab, char *name,
 					   size_t name_len, bool with_variant,
-					   bool bus_type_mode)
+					   bool bus_type_mode, bool with_default)
 {
 	/* strlen(',variant=') + strlen(ab->qmi.target.bdf_ext) */
 	char variant[9 + ATH12K_QMI_BDF_EXT_STR_LENGTH] = { 0 };
@@ -204,7 +204,9 @@ static int __ath12k_core_create_board_name(struct ath12k_base *ab, char *name,
 			  "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
 			  ath12k_bus_str(ab->hif.bus),
 			  ab->qmi.target.chip_id,
-			  ab->qmi.target.board_id, variant);
+			  with_default ?
+			  ATH12K_BOARD_ID_DEFAULT : ab->qmi.target.board_id,
+			  variant);
 		break;
 	}
 
@@ -216,19 +218,19 @@ static int __ath12k_core_create_board_name(struct ath12k_base *ab, char *name,
 static int ath12k_core_create_board_name(struct ath12k_base *ab, char *name,
 					 size_t name_len)
 {
-	return __ath12k_core_create_board_name(ab, name, name_len, true, false);
+	return __ath12k_core_create_board_name(ab, name, name_len, true, false, false);
 }
 
 static int ath12k_core_create_fallback_board_name(struct ath12k_base *ab, char *name,
 						  size_t name_len)
 {
-	return __ath12k_core_create_board_name(ab, name, name_len, false, false);
+	return __ath12k_core_create_board_name(ab, name, name_len, false, false, true);
 }
 
 static int ath12k_core_create_bus_type_board_name(struct ath12k_base *ab, char *name,
 						  size_t name_len)
 {
-	return __ath12k_core_create_board_name(ab, name, name_len, false, true);
+	return __ath12k_core_create_board_name(ab, name, name_len, false, true, true);
 }
 
 const struct firmware *ath12k_core_firmware_request(struct ath12k_base *ab,
-- 
2.39.5

[PATCH AUTOSEL 6.14 598/642] wifi: ath12k: Fix end offset bit definition in monitor ring descriptor

[Sasha Levin]

From: P Praneesh <quic_ppranees@quicinc.com>

[ Upstream commit 6788a666000d600bd8f2e9f991cad9cc805e7f01 ]

End offset for the monitor destination ring descriptor is defined as
16 bits, while the firmware definition specifies only 12 bits.
The remaining bits (bit 12 to bit 15) are reserved and may contain
junk values, leading to invalid information retrieval. Fix this issue
by updating the correct genmask values.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20241223060132.3506372-8-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/hal_desc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/hal_desc.h b/drivers/net/wireless/ath/ath12k/hal_desc.h
index 7b0403d245e59..a102d27e5785f 100644
--- a/drivers/net/wireless/ath/ath12k/hal_desc.h
+++ b/drivers/net/wireless/ath/ath12k/hal_desc.h
@@ -2968,7 +2968,7 @@ struct hal_mon_buf_ring {
 
 #define HAL_MON_DEST_COOKIE_BUF_ID      GENMASK(17, 0)
 
-#define HAL_MON_DEST_INFO0_END_OFFSET		GENMASK(15, 0)
+#define HAL_MON_DEST_INFO0_END_OFFSET		GENMASK(11, 0)
 #define HAL_MON_DEST_INFO0_FLUSH_DETECTED	BIT(16)
 #define HAL_MON_DEST_INFO0_END_OF_PPDU		BIT(17)
 #define HAL_MON_DEST_INFO0_INITIATOR		BIT(18)
-- 
2.39.5

[PATCH AUTOSEL 6.14 599/642] wifi: ath12k: report station mode receive rate for IEEE 802.11be

[Sasha Levin]

From: Lingbo Kong <quic_lingbok@quicinc.com>

[ Upstream commit 5e73276c814fc1a5a1bce6be743e1a07baa6d4bc ]

Currently, the receive rate of EHT of "iw dev xxx station dump" command
always show an invalid value.

This is because ath12k does not pass information about the rx_status of EHT
to mac80211. So, mac80211 not calculate the receive rate.

To address this issue, add logic for handling rx_status of EHT to the
ath12k_dp_rx_h_rate() function.

After that, "iw dev xxx station dump" show the correct receive rate.
Such as:

Station 00:03:7f:12:03:03 (on wlo1)
        inactive time:  48 ms
        rx bytes:       59226
        rx packets:     320
        tx bytes:       26556
        tx packets:     191
        tx retries:     99
        tx failed:      0
        beacon loss:    0
        beacon rx:      79
        rx drop misc:   68
        signal:         -95 dBm
        beacon signal avg:      -20 dBm
        tx bitrate:     688.2 MBit/s 40MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0
        tx duration:    0 us
        rx bitrate:     619.5 MBit/s 40MHz EHT-MCS 8 EHT-NSS 3 EHT-GI 0

This patch affects the station mode of WCN7850 and QCN9274.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219715
Link: https://patch.msgid.link/20250115063537.35797-3-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_rx.c   | 22 ++++++++++++++++++++--
 drivers/net/wireless/ath/ath12k/rx_desc.h |  2 ++
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index ae6608b10bb57..ff6a709b5042c 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/ieee80211.h>
@@ -2392,6 +2392,23 @@ static void ath12k_dp_rx_h_rate(struct ath12k *ar, struct hal_rx_desc *rx_desc,
 		rx_status->he_gi = ath12k_he_gi_to_nl80211_he_gi(sgi);
 		rx_status->bw = ath12k_mac_bw_to_mac80211_bw(bw);
 		break;
+	case RX_MSDU_START_PKT_TYPE_11BE:
+		rx_status->rate_idx = rate_mcs;
+
+		if (rate_mcs > ATH12K_EHT_MCS_MAX) {
+			ath12k_warn(ar->ab,
+				    "Received with invalid mcs in EHT mode %d\n",
+				    rate_mcs);
+			break;
+		}
+
+		rx_status->encoding = RX_ENC_EHT;
+		rx_status->nss = nss;
+		rx_status->eht.gi = ath12k_mac_eht_gi_to_nl80211_eht_gi(sgi);
+		rx_status->bw = ath12k_mac_bw_to_mac80211_bw(bw);
+		break;
+	default:
+		break;
 	}
 }
 
@@ -2486,7 +2503,7 @@ static void ath12k_dp_rx_deliver_msdu(struct ath12k *ar, struct napi_struct *nap
 	spin_unlock_bh(&ab->base_lock);
 
 	ath12k_dbg(ab, ATH12K_DBG_DATA,
-		   "rx skb %p len %u peer %pM %d %s sn %u %s%s%s%s%s%s%s%s%s rate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n",
+		   "rx skb %p len %u peer %pM %d %s sn %u %s%s%s%s%s%s%s%s%s%s rate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n",
 		   msdu,
 		   msdu->len,
 		   peer ? peer->addr : NULL,
@@ -2497,6 +2514,7 @@ static void ath12k_dp_rx_deliver_msdu(struct ath12k *ar, struct napi_struct *nap
 		   (status->encoding == RX_ENC_HT) ? "ht" : "",
 		   (status->encoding == RX_ENC_VHT) ? "vht" : "",
 		   (status->encoding == RX_ENC_HE) ? "he" : "",
+		   (status->encoding == RX_ENC_EHT) ? "eht" : "",
 		   (status->bw == RATE_INFO_BW_40) ? "40" : "",
 		   (status->bw == RATE_INFO_BW_80) ? "80" : "",
 		   (status->bw == RATE_INFO_BW_160) ? "160" : "",
diff --git a/drivers/net/wireless/ath/ath12k/rx_desc.h b/drivers/net/wireless/ath/ath12k/rx_desc.h
index 10366bbe99999..fc1eceb2d99bb 100644
--- a/drivers/net/wireless/ath/ath12k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath12k/rx_desc.h
@@ -637,6 +637,8 @@ enum rx_msdu_start_pkt_type {
 	RX_MSDU_START_PKT_TYPE_11N,
 	RX_MSDU_START_PKT_TYPE_11AC,
 	RX_MSDU_START_PKT_TYPE_11AX,
+	RX_MSDU_START_PKT_TYPE_11BA,
+	RX_MSDU_START_PKT_TYPE_11BE,
 };
 
 enum rx_msdu_start_sgi {
-- 
2.39.5

[PATCH AUTOSEL 6.14 600/642] wifi: ath12k: report station mode transmit rate

[Sasha Levin]

From: Lingbo Kong <quic_lingbok@quicinc.com>

[ Upstream commit 8a9c06b40882ebea45563059ddc5d57acdec9dda ]

Currently, the transmit rate of "iw dev xxx station dump" command
always show an invalid value.

To address this issue, ath12k parse the info of transmit complete
report from firmware and indicate the transmit rate to mac80211.

This patch affects the station mode of WCN7850 and QCN9274.

After that, "iw dev xxx station dump" show the correct transmit rate.
Such as:

Station 00:03:7f:12:03:03 (on wlo1)
        inactive time:  872 ms
        rx bytes:       219111
        rx packets:     1133
        tx bytes:       53767
        tx packets:     462
        tx retries:     51
        tx failed:      0
        beacon loss:    0
        beacon rx:      403
        rx drop misc:   74
        signal:         -95 dBm
        beacon signal avg:      -18 dBm
        tx bitrate:     1441.1 MBit/s 80MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219715
Link: https://patch.msgid.link/20250115063537.35797-2-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/core.h    |   2 +
 drivers/net/wireless/ath/ath12k/dp_rx.h   |   5 +-
 drivers/net/wireless/ath/ath12k/dp_tx.c   | 139 +++++++++++++++++++++-
 drivers/net/wireless/ath/ath12k/hal_rx.h  |   5 +-
 drivers/net/wireless/ath/ath12k/hal_tx.h  |  10 +-
 drivers/net/wireless/ath/ath12k/mac.c     |  79 ++++++++++++
 drivers/net/wireless/ath/ath12k/mac.h     |   5 +-
 drivers/net/wireless/ath/ath12k/rx_desc.h |   3 +-
 8 files changed, 238 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 2699c383fc4c9..96b2830e891bd 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -87,6 +87,7 @@ enum wme_ac {
 #define ATH12K_HT_MCS_MAX	7
 #define ATH12K_VHT_MCS_MAX	9
 #define ATH12K_HE_MCS_MAX	11
+#define ATH12K_EHT_MCS_MAX	15
 
 enum ath12k_crypt_mode {
 	/* Only use hardware crypto engine */
@@ -501,6 +502,7 @@ struct ath12k_link_sta {
 	struct ath12k_rx_peer_stats *rx_stats;
 	struct ath12k_wbm_tx_stats *wbm_tx_stats;
 	u32 bw_prev;
+	u32 peer_nss;
 
 	/* For now the assoc link will be considered primary */
 	bool is_assoc_link;
diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.h b/drivers/net/wireless/ath/ath12k/dp_rx.h
index 1ce82088c9540..c0aa965f47e77 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.h
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #ifndef ATH12K_DP_RX_H
 #define ATH12K_DP_RX_H
@@ -79,6 +79,9 @@ static inline u32 ath12k_he_gi_to_nl80211_he_gi(u8 sgi)
 	case RX_MSDU_START_SGI_3_2_US:
 		ret = NL80211_RATE_INFO_HE_GI_3_2;
 		break;
+	default:
+		ret = NL80211_RATE_INFO_HE_GI_0_8;
+		break;
 	}
 
 	return ret;
diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index a39bfb959797a..7dc3576287850 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -8,6 +8,8 @@
 #include "dp_tx.h"
 #include "debug.h"
 #include "hw.h"
+#include "peer.h"
+#include "mac.h"
 
 static enum hal_tcl_encap_type
 ath12k_dp_tx_get_encap_type(struct ath12k_link_vif *arvif, struct sk_buff *skb)
@@ -582,6 +584,124 @@ ath12k_dp_tx_process_htt_tx_complete(struct ath12k_base *ab,
 	}
 }
 
+static void ath12k_dp_tx_update_txcompl(struct ath12k *ar, struct hal_tx_status *ts)
+{
+	struct ath12k_base *ab = ar->ab;
+	struct ath12k_peer *peer;
+	struct ieee80211_sta *sta;
+	struct ath12k_sta *ahsta;
+	struct ath12k_link_sta *arsta;
+	struct rate_info txrate = {0};
+	u16 rate, ru_tones;
+	u8 rate_idx = 0;
+	int ret;
+
+	spin_lock_bh(&ab->base_lock);
+	peer = ath12k_peer_find_by_id(ab, ts->peer_id);
+	if (!peer || !peer->sta) {
+		ath12k_dbg(ab, ATH12K_DBG_DP_TX,
+			   "failed to find the peer by id %u\n", ts->peer_id);
+		spin_unlock_bh(&ab->base_lock);
+		return;
+	}
+	sta = peer->sta;
+	ahsta = ath12k_sta_to_ahsta(sta);
+	arsta = &ahsta->deflink;
+
+	/* This is to prefer choose the real NSS value arsta->last_txrate.nss,
+	 * if it is invalid, then choose the NSS value while assoc.
+	 */
+	if (arsta->last_txrate.nss)
+		txrate.nss = arsta->last_txrate.nss;
+	else
+		txrate.nss = arsta->peer_nss;
+	spin_unlock_bh(&ab->base_lock);
+
+	switch (ts->pkt_type) {
+	case HAL_TX_RATE_STATS_PKT_TYPE_11A:
+	case HAL_TX_RATE_STATS_PKT_TYPE_11B:
+		ret = ath12k_mac_hw_ratecode_to_legacy_rate(ts->mcs,
+							    ts->pkt_type,
+							    &rate_idx,
+							    &rate);
+		if (ret < 0) {
+			ath12k_warn(ab, "Invalid tx legacy rate %d\n", ret);
+			return;
+		}
+
+		txrate.legacy = rate;
+		break;
+	case HAL_TX_RATE_STATS_PKT_TYPE_11N:
+		if (ts->mcs > ATH12K_HT_MCS_MAX) {
+			ath12k_warn(ab, "Invalid HT mcs index %d\n", ts->mcs);
+			return;
+		}
+
+		if (txrate.nss != 0)
+			txrate.mcs = ts->mcs + 8 * (txrate.nss - 1);
+
+		txrate.flags = RATE_INFO_FLAGS_MCS;
+
+		if (ts->sgi)
+			txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+		break;
+	case HAL_TX_RATE_STATS_PKT_TYPE_11AC:
+		if (ts->mcs > ATH12K_VHT_MCS_MAX) {
+			ath12k_warn(ab, "Invalid VHT mcs index %d\n", ts->mcs);
+			return;
+		}
+
+		txrate.mcs = ts->mcs;
+		txrate.flags = RATE_INFO_FLAGS_VHT_MCS;
+
+		if (ts->sgi)
+			txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+		break;
+	case HAL_TX_RATE_STATS_PKT_TYPE_11AX:
+		if (ts->mcs > ATH12K_HE_MCS_MAX) {
+			ath12k_warn(ab, "Invalid HE mcs index %d\n", ts->mcs);
+			return;
+		}
+
+		txrate.mcs = ts->mcs;
+		txrate.flags = RATE_INFO_FLAGS_HE_MCS;
+		txrate.he_gi = ath12k_he_gi_to_nl80211_he_gi(ts->sgi);
+		break;
+	case HAL_TX_RATE_STATS_PKT_TYPE_11BE:
+		if (ts->mcs > ATH12K_EHT_MCS_MAX) {
+			ath12k_warn(ab, "Invalid EHT mcs index %d\n", ts->mcs);
+			return;
+		}
+
+		txrate.mcs = ts->mcs;
+		txrate.flags = RATE_INFO_FLAGS_EHT_MCS;
+		txrate.eht_gi = ath12k_mac_eht_gi_to_nl80211_eht_gi(ts->sgi);
+		break;
+	default:
+		ath12k_warn(ab, "Invalid tx pkt type: %d\n", ts->pkt_type);
+		return;
+	}
+
+	txrate.bw = ath12k_mac_bw_to_mac80211_bw(ts->bw);
+
+	if (ts->ofdma && ts->pkt_type == HAL_TX_RATE_STATS_PKT_TYPE_11AX) {
+		txrate.bw = RATE_INFO_BW_HE_RU;
+		ru_tones = ath12k_mac_he_convert_tones_to_ru_tones(ts->tones);
+		txrate.he_ru_alloc =
+			ath12k_he_ru_tones_to_nl80211_he_ru_alloc(ru_tones);
+	}
+
+	if (ts->ofdma && ts->pkt_type == HAL_TX_RATE_STATS_PKT_TYPE_11BE) {
+		txrate.bw = RATE_INFO_BW_EHT_RU;
+		txrate.eht_ru_alloc =
+			ath12k_mac_eht_ru_tones_to_nl80211_eht_ru_alloc(ts->tones);
+	}
+
+	spin_lock_bh(&ab->base_lock);
+	arsta->txrate = txrate;
+	spin_unlock_bh(&ab->base_lock);
+}
+
 static void ath12k_dp_tx_complete_msdu(struct ath12k *ar,
 				       struct sk_buff *msdu,
 				       struct hal_tx_status *ts)
@@ -660,6 +780,8 @@ static void ath12k_dp_tx_complete_msdu(struct ath12k *ar,
 	 * Might end up reporting it out-of-band from HTT stats.
 	 */
 
+	ath12k_dp_tx_update_txcompl(ar, ts);
+
 	ieee80211_tx_status_skb(ath12k_ar_to_hw(ar), msdu);
 
 exit:
@@ -670,6 +792,8 @@ static void ath12k_dp_tx_status_parse(struct ath12k_base *ab,
 				      struct hal_wbm_completion_ring_tx *desc,
 				      struct hal_tx_status *ts)
 {
+	u32 info0 = le32_to_cpu(desc->rate_stats.info0);
+
 	ts->buf_rel_source =
 		le32_get_bits(desc->info0, HAL_WBM_COMPL_TX_INFO0_REL_SRC_MODULE);
 	if (ts->buf_rel_source != HAL_WBM_REL_SRC_MODULE_FW &&
@@ -684,10 +808,17 @@ static void ath12k_dp_tx_status_parse(struct ath12k_base *ab,
 
 	ts->ppdu_id = le32_get_bits(desc->info1,
 				    HAL_WBM_COMPL_TX_INFO1_TQM_STATUS_NUMBER);
-	if (le32_to_cpu(desc->rate_stats.info0) & HAL_TX_RATE_STATS_INFO0_VALID)
-		ts->rate_stats = le32_to_cpu(desc->rate_stats.info0);
-	else
-		ts->rate_stats = 0;
+
+	ts->peer_id = le32_get_bits(desc->info3, HAL_WBM_COMPL_TX_INFO3_PEER_ID);
+
+	if (info0 & HAL_TX_RATE_STATS_INFO0_VALID) {
+		ts->pkt_type = u32_get_bits(info0, HAL_TX_RATE_STATS_INFO0_PKT_TYPE);
+		ts->mcs = u32_get_bits(info0, HAL_TX_RATE_STATS_INFO0_MCS);
+		ts->sgi = u32_get_bits(info0, HAL_TX_RATE_STATS_INFO0_SGI);
+		ts->bw = u32_get_bits(info0, HAL_TX_RATE_STATS_INFO0_BW);
+		ts->tones = u32_get_bits(info0, HAL_TX_RATE_STATS_INFO0_TONES_IN_RU);
+		ts->ofdma = u32_get_bits(info0, HAL_TX_RATE_STATS_INFO0_OFDMA_TX);
+	}
 }
 
 void ath12k_dp_tx_completion_handler(struct ath12k_base *ab, int ring_id)
diff --git a/drivers/net/wireless/ath/ath12k/hal_rx.h b/drivers/net/wireless/ath/ath12k/hal_rx.h
index 55b2dd5b76f6b..ac3b3f17ec2c8 100644
--- a/drivers/net/wireless/ath/ath12k/hal_rx.h
+++ b/drivers/net/wireless/ath/ath12k/hal_rx.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_HAL_RX_H
@@ -666,6 +666,9 @@ enum nl80211_he_ru_alloc ath12k_he_ru_tones_to_nl80211_he_ru_alloc(u16 ru_tones)
 	case RU_996:
 		ret = NL80211_RATE_INFO_HE_RU_ALLOC_996;
 		break;
+	case RU_2X996:
+		ret = NL80211_RATE_INFO_HE_RU_ALLOC_2x996;
+		break;
 	case RU_26:
 		fallthrough;
 	default:
diff --git a/drivers/net/wireless/ath/ath12k/hal_tx.h b/drivers/net/wireless/ath/ath12k/hal_tx.h
index 3cf5973771d78..eb065a79f6c64 100644
--- a/drivers/net/wireless/ath/ath12k/hal_tx.h
+++ b/drivers/net/wireless/ath/ath12k/hal_tx.h
@@ -1,7 +1,8 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022, 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2022, 2024-2025 Qualcomm Innovation Center, Inc.
+ * All rights reserved.
  */
 
 #ifndef ATH12K_HAL_TX_H
@@ -63,7 +64,12 @@ struct hal_tx_status {
 	u8 try_cnt;
 	u8 tid;
 	u16 peer_id;
-	u32 rate_stats;
+	enum hal_tx_rate_stats_pkt_type pkt_type;
+	enum hal_tx_rate_stats_sgi sgi;
+	enum ath12k_supported_bw bw;
+	u8 mcs;
+	u16 tones;
+	u8 ofdma;
 };
 
 #define HAL_TX_PHY_DESC_INFO0_BF_TYPE		GENMASK(17, 16)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 95ad9fefbdfcd..5f6d9896ef613 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -337,6 +337,82 @@ static const char *ath12k_mac_phymode_str(enum wmi_phy_mode mode)
 	return "<unknown>";
 }
 
+u16 ath12k_mac_he_convert_tones_to_ru_tones(u16 tones)
+{
+	switch (tones) {
+	case 26:
+		return RU_26;
+	case 52:
+		return RU_52;
+	case 106:
+		return RU_106;
+	case 242:
+		return RU_242;
+	case 484:
+		return RU_484;
+	case 996:
+		return RU_996;
+	case (996 * 2):
+		return RU_2X996;
+	default:
+		return RU_26;
+	}
+}
+
+enum nl80211_eht_gi ath12k_mac_eht_gi_to_nl80211_eht_gi(u8 sgi)
+{
+	switch (sgi) {
+	case RX_MSDU_START_SGI_0_8_US:
+		return NL80211_RATE_INFO_EHT_GI_0_8;
+	case RX_MSDU_START_SGI_1_6_US:
+		return NL80211_RATE_INFO_EHT_GI_1_6;
+	case RX_MSDU_START_SGI_3_2_US:
+		return NL80211_RATE_INFO_EHT_GI_3_2;
+	default:
+		return NL80211_RATE_INFO_EHT_GI_0_8;
+	}
+}
+
+enum nl80211_eht_ru_alloc ath12k_mac_eht_ru_tones_to_nl80211_eht_ru_alloc(u16 ru_tones)
+{
+	switch (ru_tones) {
+	case 26:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_26;
+	case 52:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_52;
+	case (52 + 26):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_52P26;
+	case 106:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_106;
+	case (106 + 26):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_106P26;
+	case 242:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_242;
+	case 484:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_484;
+	case (484 + 242):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_484P242;
+	case 996:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_996;
+	case (996 + 484):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_996P484;
+	case (996 + 484 + 242):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242;
+	case (2 * 996):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_2x996;
+	case (2 * 996 + 484):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484;
+	case (3 * 996):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_3x996;
+	case (3 * 996 + 484):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484;
+	case (4 * 996):
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_4x996;
+	default:
+		return NL80211_RATE_INFO_EHT_RU_ALLOC_26;
+	}
+}
+
 enum rate_info_bw
 ath12k_mac_bw_to_mac80211_bw(enum ath12k_supported_bw bw)
 {
@@ -3116,6 +3192,7 @@ static void ath12k_peer_assoc_prepare(struct ath12k *ar,
 	ath12k_peer_assoc_h_smps(arsta, arg);
 	ath12k_peer_assoc_h_mlo(arsta, arg);
 
+	arsta->peer_nss = arg->peer_nss;
 	/* TODO: amsdu_disable req? */
 }
 
@@ -10042,6 +10119,8 @@ static void ath12k_mac_op_sta_statistics(struct ieee80211_hw *hw,
 		sinfo->txrate.he_gi = arsta->txrate.he_gi;
 		sinfo->txrate.he_dcm = arsta->txrate.he_dcm;
 		sinfo->txrate.he_ru_alloc = arsta->txrate.he_ru_alloc;
+		sinfo->txrate.eht_gi = arsta->txrate.eht_gi;
+		sinfo->txrate.eht_ru_alloc = arsta->txrate.eht_ru_alloc;
 	}
 	sinfo->txrate.flags = arsta->txrate.flags;
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
diff --git a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
index 3594729b63974..1acaf3f68292c 100644
--- a/drivers/net/wireless/ath/ath12k/mac.h
+++ b/drivers/net/wireless/ath/ath12k/mac.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_MAC_H
@@ -108,5 +108,8 @@ int ath12k_mac_vdev_stop(struct ath12k_link_vif *arvif);
 void ath12k_mac_get_any_chanctx_conf_iter(struct ieee80211_hw *hw,
 					  struct ieee80211_chanctx_conf *conf,
 					  void *data);
+u16 ath12k_mac_he_convert_tones_to_ru_tones(u16 tones);
+enum nl80211_eht_ru_alloc ath12k_mac_eht_ru_tones_to_nl80211_eht_ru_alloc(u16 ru_tones);
+enum nl80211_eht_gi ath12k_mac_eht_gi_to_nl80211_eht_gi(u8 sgi);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath12k/rx_desc.h b/drivers/net/wireless/ath/ath12k/rx_desc.h
index fc1eceb2d99bb..7367935ee68b3 100644
--- a/drivers/net/wireless/ath/ath12k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath12k/rx_desc.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #ifndef ATH12K_RX_DESC_H
 #define ATH12K_RX_DESC_H
@@ -1548,5 +1548,6 @@ struct hal_rx_desc {
 #define RU_242 9
 #define RU_484 18
 #define RU_996 37
+#define RU_2X996 74
 
 #endif /* ATH12K_RX_DESC_H */
-- 
2.39.5