Historical ath9k-devel archives
 help / color / mirror / Atom feed
From: Oleksij Rempel <linux@rempel-privat.de>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] [PATCH 05/18] ath9k: add multi_read to be compatible with ath9k_htc
Date: Fri, 20 Mar 2015 13:38:45 +0100	[thread overview]
Message-ID: <1426855138-6121-6-git-send-email-linux@rempel-privat.de> (raw)
In-Reply-To: <1426855138-6121-1-git-send-email-linux@rempel-privat.de>

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/net/wireless/ath/ath9k/init.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 6c6e884..041decc 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -141,6 +141,16 @@ static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
 	return val;
 }
 
+static void ath9k_multi_ioread32(void *hw_priv, u32 *addr,
+                                u32 *val, u16 count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		val[i] = ath9k_ioread32(hw_priv, addr[i]);
+}
+
+
 static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset,
 				    u32 set, u32 clr)
 {
@@ -530,6 +540,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	ah->hw = sc->hw;
 	ah->hw_version.devid = devid;
 	ah->reg_ops.read = ath9k_ioread32;
+	ah->reg_ops.multi_read = ath9k_multi_ioread32;
 	ah->reg_ops.write = ath9k_iowrite32;
 	ah->reg_ops.rmw = ath9k_reg_rmw;
 	pCap = &ah->caps;
-- 
1.9.1

  parent reply	other threads:[~2015-03-20 12:38 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-20 12:38 [ath9k-devel] [PATCH 00/18] reduce some of ath9k_htc performance problems Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 01/18] ath9k_htc: add new WMI_REG_RMW_CMDID command Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 02/18] ath9k: ar9271_hw_pa_cal - use defs instead of magin numbers Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 03/18] ath9k: ar9271_hw_pa_cal: use proper makroses Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 04/18] ath9k: ar9271_hw_pa_cal: use RMW buffer Oleksij Rempel
2015-03-20 12:38 ` Oleksij Rempel [this message]
2015-03-20 12:38 ` [ath9k-devel] [PATCH 06/18] ath9k: add new function ath9k_hw_read_array Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 07/18] ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 08/18] ath9k: use one shot read in ath9k_hw_update_mibstats Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 09/18] ath9k: ath9k_hw_loadnf: use REG_RMW Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 10/18] ath9k: write buffer related optimisation in ar5008_hw_set_channel_regs Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 11/18] ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 12/18] ath9k: use rmw buffer in ath9k_hw_set_operating_mode and ath9k_hw_reset Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 13/18] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 14/18] ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 15/18] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 16/18] ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_gain Oleksij Rempel
2015-03-20 13:00   ` Felix Fietkau
2015-03-21  5:25     ` Oleksij Rempel
2015-03-21  8:07     ` [ath9k-devel] [PATCH 16/18 v2] " Oleksij Rempel
2015-03-21  8:43       ` Kalle Valo
2015-03-20 12:38 ` [ath9k-devel] [PATCH 17/18] ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_board_values Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 18/18] ath9k: use REG_RMW and rmw buffer in ath9k_hw_def_set_gain Oleksij Rempel
2015-03-20 13:01   ` Felix Fietkau
2015-03-21  8:04     ` [ath9k-devel] [PATCH 18/18 v2] " Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426855138-6121-6-git-send-email-linux@rempel-privat.de \
    --to=linux@rempel-privat.de \
    --cc=ath9k-devel@lists.ath9k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox