From: Oleksij Rempel <linux@rempel-privat.de>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] [PATCH 06/18] ath9k: add new function ath9k_hw_read_array
Date: Fri, 20 Mar 2015 13:38:46 +0100 [thread overview]
Message-ID: <1426855138-6121-7-git-send-email-linux@rempel-privat.de> (raw)
In-Reply-To: <1426855138-6121-1-git-send-email-linux@rempel-privat.de>
REG_READ generate most overhead on usb bus. It send and read micro packages
and reduce usb bandwidth. To reduce this overhead we should read in batches.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
drivers/net/wireless/ath/ath9k/hw.c | 20 ++++++++++++++++++++
drivers/net/wireless/ath/ath9k/hw.h | 3 +++
2 files changed, 23 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 60aa8d7..15433c7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -121,6 +121,26 @@ void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
REGWRITE_BUFFER_FLUSH(ah);
}
+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size)
+{
+ u32 *tmp_reg_list, *tmp_data;
+ int i;
+
+ tmp_reg_list = kmalloc(size * sizeof(u32), GFP_KERNEL);
+ tmp_data = kmalloc(size * sizeof(u32), GFP_KERNEL);
+
+ for (i = 0; i < size; i++)
+ tmp_reg_list[i] = array[i][0];
+
+ REG_READ_MULTI(ah, tmp_reg_list, tmp_data, size);
+
+ for (i = 0; i < size; i++)
+ array[i][1] = tmp_data[i];
+
+ kfree(tmp_reg_list);
+ kfree(tmp_data);
+}
+
u32 ath9k_hw_reverse_bits(u32 val, u32 n)
{
u32 retval;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index f1864cc..66aba10 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -138,6 +138,8 @@
#define REG_WRITE_ARRAY(iniarray, column, regWr) \
ath9k_hw_write_array(ah, iniarray, column, &(regWr))
+#define REG_READ_ARRAY(ah, array, size) \
+ ath9k_hw_read_array(ah, array, size)
#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0
#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
@@ -1020,6 +1022,7 @@ void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
int column, unsigned int *writecnt);
+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size);
u32 ath9k_hw_reverse_bits(u32 val, u32 n);
u16 ath9k_hw_computetxtime(struct ath_hw *ah,
u8 phy, int kbps,
--
1.9.1
next prev parent reply other threads:[~2015-03-20 12:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 12:38 [ath9k-devel] [PATCH 00/18] reduce some of ath9k_htc performance problems Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 01/18] ath9k_htc: add new WMI_REG_RMW_CMDID command Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 02/18] ath9k: ar9271_hw_pa_cal - use defs instead of magin numbers Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 03/18] ath9k: ar9271_hw_pa_cal: use proper makroses Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 04/18] ath9k: ar9271_hw_pa_cal: use RMW buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 05/18] ath9k: add multi_read to be compatible with ath9k_htc Oleksij Rempel
2015-03-20 12:38 ` Oleksij Rempel [this message]
2015-03-20 12:38 ` [ath9k-devel] [PATCH 07/18] ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 08/18] ath9k: use one shot read in ath9k_hw_update_mibstats Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 09/18] ath9k: ath9k_hw_loadnf: use REG_RMW Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 10/18] ath9k: write buffer related optimisation in ar5008_hw_set_channel_regs Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 11/18] ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 12/18] ath9k: use rmw buffer in ath9k_hw_set_operating_mode and ath9k_hw_reset Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 13/18] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 14/18] ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 15/18] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 16/18] ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_gain Oleksij Rempel
2015-03-20 13:00 ` Felix Fietkau
2015-03-21 5:25 ` Oleksij Rempel
2015-03-21 8:07 ` [ath9k-devel] [PATCH 16/18 v2] " Oleksij Rempel
2015-03-21 8:43 ` Kalle Valo
2015-03-20 12:38 ` [ath9k-devel] [PATCH 17/18] ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_board_values Oleksij Rempel
2015-03-20 12:38 ` [ath9k-devel] [PATCH 18/18] ath9k: use REG_RMW and rmw buffer in ath9k_hw_def_set_gain Oleksij Rempel
2015-03-20 13:01 ` Felix Fietkau
2015-03-21 8:04 ` [ath9k-devel] [PATCH 18/18 v2] " Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426855138-6121-7-git-send-email-linux@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox