* [ath9k-devel] ath9k bug: DMA failed to stop ...
@ 2013-01-18 22:15 Xose Vazquez Perez
0 siblings, 0 replies; only message in thread
From: Xose Vazquez Perez @ 2013-01-18 22:15 UTC (permalink / raw)
To: ath9k-devel
hi,
I see occasionally bugs with ath9k hardware:
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
ath: phy0: Could not stop RX, we could be confusing the DMA engine when
we start RX up
ath: phy0: Failed to stop TX DMA, queues=0x001!
kernel: 3.6.11-5.fc17.x86_64, and older.
device:
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900116c0000, irq=19
05:00.0 Network controller [0280]: Atheros Communications Inc. AR928X
Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
I also see the *same bug* with openwrt ATTITUDE ADJUSTMENT (12.09-rc1,
r34185) on a Buffalo WZR-HP-G300NH device:
https://dev.openwrt.org/ticket/12623
-thanks-
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-01-18 22:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-18 22:15 [ath9k-devel] ath9k bug: DMA failed to stop Xose Vazquez Perez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox