public inbox for b43-dev@lists.infradead.org
 help / color / mirror / Atom feed
* Fw: Regression: bcm4312 lp-phy device not recognized in 4.15 kernel
@ 2018-02-04 18:58 Chris Vine
  2018-02-04 20:03 ` Florian Fainelli
  0 siblings, 1 reply; 4+ messages in thread
From: Chris Vine @ 2018-02-04 18:58 UTC (permalink / raw)
  To: b43-dev, linux-wireless

I probably should have copied this to the relevant kernel wireless
mailing lists.  Anyway, here it is.

As a further datum point, the b43 driver works fine with the 4.15.0-rc3
kernel.  So something seems to have changed between that and 4.15.0.

Chris

Begin forwarded message:

Date: Mon, 29 Jan 2018 23:37:49 +0000
From: Chris Vine <vine35792468@gmail.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Regression: bcm4312 lp-phy device not recognized in 4.15 kernel


I have an old netbook with a Broadcom bcm4312 802.11b/g lp-phy
[14e4:4315] (rev 01) wifi device.  It is no longer recognized in kernel
4.15: it works fine with the 4.14 kernel and earlier, with the b43 and
ssb kernel modules.

I cannot give any further information as there are no error messages
logged. The b43 firmware (wl-5.100.138) is not loaded for it, nor are
the ssb/b43/bcma/ mmc_core/mac80211/cfg80211 modules.  The modules can
be loaded by hand without error, but nothing happens and no network
interface is presented.

This is a pretty slow and rubbish netbook but is useful when travelling
to a country which might impound your laptop (no names) and you don't
mind too much losing it.  It would be nice to continue to be able to
use it for that.

Chris

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2018-02-05 10:26 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-04 18:58 Fw: Regression: bcm4312 lp-phy device not recognized in 4.15 kernel Chris Vine
2018-02-04 20:03 ` Florian Fainelli
2018-02-04 22:00   ` Chris Vine
2018-02-05 10:26     ` Chris Vine

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox