* B43 N mode
@ 2015-09-30 15:05 Matt Goring
2015-09-30 16:37 ` Rafał Miłecki
0 siblings, 1 reply; 3+ messages in thread
From: Matt Goring @ 2015-09-30 15:05 UTC (permalink / raw)
To: b43-dev
Hello, I am using a BCM43217. And I'm wondering if there are any B43
devices which work in N mode?
I guess my main question is, is there any reverse engineering tools that
work with a Broadcom MIPS router. Mostly to monitor the PCI bus. Which
'hopefully' I can add to the GPL source which is supplied by large
companies.
^ permalink raw reply [flat|nested] 3+ messages in thread
* B43 N mode
2015-09-30 15:05 B43 N mode Matt Goring
@ 2015-09-30 16:37 ` Rafał Miłecki
2015-09-30 19:42 ` Matt Goring
0 siblings, 1 reply; 3+ messages in thread
From: Rafał Miłecki @ 2015-09-30 16:37 UTC (permalink / raw)
To: b43-dev
On 30 September 2015 at 17:05, Matt Goring <matt.goring@googlemail.com> wrote:
> I guess my main question is, is there any reverse engineering tools that
> work with a Broadcom MIPS router. Mostly to monitor the PCI bus. Which
> 'hopefully' I can add to the GPL source which is supplied by large
> companies.
The tool I used on x86 / x86_64 is mmiotrace. It's not available for MIPS.
--
Rafa?
^ permalink raw reply [flat|nested] 3+ messages in thread
* B43 N mode
2015-09-30 16:37 ` Rafał Miłecki
@ 2015-09-30 19:42 ` Matt Goring
0 siblings, 0 replies; 3+ messages in thread
From: Matt Goring @ 2015-09-30 19:42 UTC (permalink / raw)
To: b43-dev
Thanks for responding. Perhaps I will try to hard-code some addresses
and transfer the data between them?
> The tool I used on x86 / x86_64 is mmiotrace. It's not available for
> MIPS.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-09-30 19:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-30 15:05 B43 N mode Matt Goring
2015-09-30 16:37 ` Rafał Miłecki
2015-09-30 19:42 ` Matt Goring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox