* multiple SSID support (in BCM4318)
@ 2012-05-06 6:29 Tomáš Hnyk
2012-05-06 15:02 ` Larry Finger
2012-05-07 22:38 ` Francesco Gringoli
0 siblings, 2 replies; 3+ messages in thread
From: Tomáš Hnyk @ 2012-05-06 6:29 UTC (permalink / raw)
To: b43-dev
Hello all,
are multiple SSID supported (especially on BCM4318)? I could not find the
answer through googling.
By tw way, on your page, you say "BCM4318 chipset: AP mode does not work
because of packet loss in high transmission rates. Hard to debug & fix."
IS it still true? It seems to me it works fine, but I have been trying it
only for a while.
Regards,
Tomas
^ permalink raw reply [flat|nested] 3+ messages in thread
* multiple SSID support (in BCM4318)
2012-05-06 6:29 multiple SSID support (in BCM4318) Tomáš Hnyk
@ 2012-05-06 15:02 ` Larry Finger
2012-05-07 22:38 ` Francesco Gringoli
1 sibling, 0 replies; 3+ messages in thread
From: Larry Finger @ 2012-05-06 15:02 UTC (permalink / raw)
To: b43-dev
On 05/06/2012 01:29 AM, Tom?? Hnyk wrote:
> Hello all,
> are multiple SSID supported (especially on BCM4318)? I could not find the answer
> through googling.
>
> By tw way, on your page, you say "BCM4318 chipset: AP mode does not work because
> of packet loss in high transmission rates. Hard to debug & fix." IS it still
> true? It seems to me it works fine, but I have been trying it only for a while.
> Regards,
> Tomas
To my knowledge, there have been no fixes specific for the BCM4318 that were
aimed at fixing the packet loss at high transmission rates; however, there have
been a lot of fixes for b43. Perhaps one or more of them helped that problem.
Your tests will likely tell.
As to the multiple SSID question, that will be a function of mac80211 and
friends. Comment #3 of http://forums.freebsd.org/showthread.php?t=24268 seems to
have a prescription for using nl80211 to accomplish that. If that posting
doesn't answer your question, direct further inquiries to
linux-wireless at vger.kernel.org.
Larry
^ permalink raw reply [flat|nested] 3+ messages in thread
* multiple SSID support (in BCM4318)
2012-05-06 6:29 multiple SSID support (in BCM4318) Tomáš Hnyk
2012-05-06 15:02 ` Larry Finger
@ 2012-05-07 22:38 ` Francesco Gringoli
1 sibling, 0 replies; 3+ messages in thread
From: Francesco Gringoli @ 2012-05-07 22:38 UTC (permalink / raw)
To: b43-dev
On May 6, 2012, at 8:29 AM, Tom?? Hnyk wrote:
> Hello all,
> are multiple SSID supported (especially on BCM4318)? I could not find the answer through googling.
>
> By tw way, on your page, you say "BCM4318 chipset: AP mode does not work because of packet loss in high transmission rates. Hard to debug & fix." IS it still true? It seems to me it works fine, but I have been trying it only for a while.
Hi Tom?s,
this problem was almost not detectable by users and it was finally addressed here http://lists.infradead.org/pipermail/b43-dev/2011-December/002249.html
Everything should work fine as you say.
KR,
-Francesco
> Regards,
> Tomas
>
> _______________________________________________
> b43-dev mailing list
> b43-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/b43-dev
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-05-07 22:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-06 6:29 multiple SSID support (in BCM4318) Tomáš Hnyk
2012-05-06 15:02 ` Larry Finger
2012-05-07 22:38 ` Francesco Gringoli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox