* [B.A.T.M.A.N.] IBSS key in batman-adv
@ 2014-09-17 7:04 Zaki
2014-09-17 7:31 ` Antonio Quartulli
0 siblings, 1 reply; 3+ messages in thread
From: Zaki @ 2014-09-17 7:04 UTC (permalink / raw)
To: The list for a Better Approach To Mobile Ad-hoc Networking
Hi,
I have a short question. I am using IBSS to create batman-adv mesh
network. To secure the IBSS, i am using the IBSS key. I noticed that
when i am on the mesh network, any device that is not having the key
also can ping and iperf to me. I thought IBSS key is supposed to
allow only legitimate device. Does anybody know where i do wrong
here?.
Rgds,
Zack.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [B.A.T.M.A.N.] IBSS key in batman-adv
2014-09-17 7:04 [B.A.T.M.A.N.] IBSS key in batman-adv Zaki
@ 2014-09-17 7:31 ` Antonio Quartulli
2014-09-17 7:43 ` Zaki
0 siblings, 1 reply; 3+ messages in thread
From: Antonio Quartulli @ 2014-09-17 7:31 UTC (permalink / raw)
To: zaki.bm; +Cc: The list for a Better Approach To Mobile Ad-hoc Networking
[-- Attachment #1: Type: text/plain, Size: 1114 bytes --]
Hi Zaki,
On 17/09/14 09:04, Zaki wrote:
> Hi,
>
>
> I have a short question. I am using IBSS to create batman-adv mesh
> network. To secure the IBSS, i am using the IBSS key. I noticed that
> when i am on the mesh network, any device that is not having the key
> also can ping and iperf to me. I thought IBSS key is supposed to
> allow only legitimate device. Does anybody know where i do wrong
> here?.
This is more a linux-wireless question other than a batman-adv one.
batman-adv itself can't do much in this case since it does not know
anything about what is happening on the layers below.
In my opinion you are doing something wrong while setting up the
IBSS-RSN mechanism. (I guess you are using IBSS-RSN right ?)
A station not having the correct key should show up in the "station
dump" output of the other nodes with the "Authorized" attribute set to
"no". Is this the case? If not, then something i wrong with the
wpa_supplicant setup.
Cheers,
p.s. I'd recommend CC'ing the linux wireledd mailing list if you have
further questions.
--
Antonio Quartulli
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [B.A.T.M.A.N.] IBSS key in batman-adv
2014-09-17 7:31 ` Antonio Quartulli
@ 2014-09-17 7:43 ` Zaki
0 siblings, 0 replies; 3+ messages in thread
From: Zaki @ 2014-09-17 7:43 UTC (permalink / raw)
To: Antonio Quartulli
Cc: The list for a Better Approach To Mobile Ad-hoc Networking
Hi Antonio,
Thank you very much for your great support. Ok, now it clear to me
that i need to troubleshoot on my IBSS setup rather than batman-adv.
I will check again my IBSS-RSN.
Rgds,
Zack.
On Wed, Sep 17, 2014 at 3:31 PM, Antonio Quartulli
<antonio@meshcoding.com> wrote:
> Hi Zaki,
>
> On 17/09/14 09:04, Zaki wrote:
>> Hi,
>>
>>
>> I have a short question. I am using IBSS to create batman-adv mesh
>> network. To secure the IBSS, i am using the IBSS key. I noticed that
>> when i am on the mesh network, any device that is not having the key
>> also can ping and iperf to me. I thought IBSS key is supposed to
>> allow only legitimate device. Does anybody know where i do wrong
>> here?.
>
> This is more a linux-wireless question other than a batman-adv one.
> batman-adv itself can't do much in this case since it does not know
> anything about what is happening on the layers below.
>
> In my opinion you are doing something wrong while setting up the
> IBSS-RSN mechanism. (I guess you are using IBSS-RSN right ?)
>
> A station not having the correct key should show up in the "station
> dump" output of the other nodes with the "Authorized" attribute set to
> "no". Is this the case? If not, then something i wrong with the
> wpa_supplicant setup.
>
>
> Cheers,
>
> p.s. I'd recommend CC'ing the linux wireledd mailing list if you have
> further questions.
>
> --
> Antonio Quartulli
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-09-17 7:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-17 7:04 [B.A.T.M.A.N.] IBSS key in batman-adv Zaki
2014-09-17 7:31 ` Antonio Quartulli
2014-09-17 7:43 ` Zaki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox