[PATCH AUTOSEL 5.4 049/205] net: netsec: Correct dma sync for XDP_TX frames

[PATCH AUTOSEL 5.4 049/205] net: netsec: Correct dma sync for XDP_TX frames

[Sasha Levin]

From: Ilias Apalodimas <ilias.apalodimas@linaro.org>

[ Upstream commit d9496f3ecfe4823c1e12aecbcc29220147fa012c ]

bpf_xdp_adjust_head() can change the frame boundaries. Account for the
potential shift properly by calculating the new offset before
syncing the buffer to the device for XDP_TX

Fixes: ba2b232108d3 ("net: netsec: add XDP support")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/netsec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index f9e6744d8fd6..41ddd8fff2a7 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -847,8 +847,8 @@ static u32 netsec_xdp_queue_one(struct netsec_priv *priv,
 		enum dma_data_direction dma_dir =
 			page_pool_get_dma_dir(rx_ring->page_pool);
 
-		dma_handle = page_pool_get_dma_addr(page) +
-			NETSEC_RXBUF_HEADROOM;
+		dma_handle = page_pool_get_dma_addr(page) + xdpf->headroom +
+			sizeof(*xdpf);
 		dma_sync_single_for_device(priv->dev, dma_handle, xdpf->len,
 					   dma_dir);
 		tx_desc.buf_type = TYPE_NETSEC_XDP_TX;
-- 
2.20.1

[PATCH AUTOSEL 5.4 077/205] libbpf: Fix compatibility for kernels without need_wakeup

[Sasha Levin]

From: Magnus Karlsson <magnus.karlsson@intel.com>

[ Upstream commit 94ff9ebb49a546b7f009ed840bafa235c96d4c4b ]

When the need_wakeup flag was added to AF_XDP, the format of the
XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the
kernel to take care of compatibility issues arrising from running
applications using any of the two formats. However, libbpf was
not extended to take care of the case when the application/libbpf
uses the new format but the kernel only supports the old
format. This patch adds support in libbpf for parsing the old
format, before the need_wakeup flag was added, and emulating a
set of static need_wakeup flags that will always work for the
application.

v2 -> v3:
* Incorporated code improvements suggested by Jonathan Lemon

v1 -> v2:
* Rebased to bpf-next
* Rewrote the code as the previous version made you blind

Fixes: a4500432c2587cb2a ("libbpf: add support for need_wakeup flag in AF_XDP part")
Reported-by: Eloy Degen <degeneloy@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 83 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 71 insertions(+), 12 deletions(-)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index 70f9e10de286..b29d37fba2b0 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -73,6 +73,21 @@ struct xsk_nl_info {
 	int fd;
 };
 
+/* Up until and including Linux 5.3 */
+struct xdp_ring_offset_v1 {
+	__u64 producer;
+	__u64 consumer;
+	__u64 desc;
+};
+
+/* Up until and including Linux 5.3 */
+struct xdp_mmap_offsets_v1 {
+	struct xdp_ring_offset_v1 rx;
+	struct xdp_ring_offset_v1 tx;
+	struct xdp_ring_offset_v1 fr;
+	struct xdp_ring_offset_v1 cr;
+};
+
 int xsk_umem__fd(const struct xsk_umem *umem)
 {
 	return umem ? umem->fd : -EINVAL;
@@ -133,6 +148,58 @@ static int xsk_set_xdp_socket_config(struct xsk_socket_config *cfg,
 	return 0;
 }
 
+static void xsk_mmap_offsets_v1(struct xdp_mmap_offsets *off)
+{
+	struct xdp_mmap_offsets_v1 off_v1;
+
+	/* getsockopt on a kernel <= 5.3 has no flags fields.
+	 * Copy over the offsets to the correct places in the >=5.4 format
+	 * and put the flags where they would have been on that kernel.
+	 */
+	memcpy(&off_v1, off, sizeof(off_v1));
+
+	off->rx.producer = off_v1.rx.producer;
+	off->rx.consumer = off_v1.rx.consumer;
+	off->rx.desc = off_v1.rx.desc;
+	off->rx.flags = off_v1.rx.consumer + sizeof(u32);
+
+	off->tx.producer = off_v1.tx.producer;
+	off->tx.consumer = off_v1.tx.consumer;
+	off->tx.desc = off_v1.tx.desc;
+	off->tx.flags = off_v1.tx.consumer + sizeof(u32);
+
+	off->fr.producer = off_v1.fr.producer;
+	off->fr.consumer = off_v1.fr.consumer;
+	off->fr.desc = off_v1.fr.desc;
+	off->fr.flags = off_v1.fr.consumer + sizeof(u32);
+
+	off->cr.producer = off_v1.cr.producer;
+	off->cr.consumer = off_v1.cr.consumer;
+	off->cr.desc = off_v1.cr.desc;
+	off->cr.flags = off_v1.cr.consumer + sizeof(u32);
+}
+
+static int xsk_get_mmap_offsets(int fd, struct xdp_mmap_offsets *off)
+{
+	socklen_t optlen;
+	int err;
+
+	optlen = sizeof(*off);
+	err = getsockopt(fd, SOL_XDP, XDP_MMAP_OFFSETS, off, &optlen);
+	if (err)
+		return err;
+
+	if (optlen == sizeof(*off))
+		return 0;
+
+	if (optlen == sizeof(struct xdp_mmap_offsets_v1)) {
+		xsk_mmap_offsets_v1(off);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 int xsk_umem__create_v0_0_4(struct xsk_umem **umem_ptr, void *umem_area,
 			    __u64 size, struct xsk_ring_prod *fill,
 			    struct xsk_ring_cons *comp,
@@ -141,7 +208,6 @@ int xsk_umem__create_v0_0_4(struct xsk_umem **umem_ptr, void *umem_area,
 	struct xdp_mmap_offsets off;
 	struct xdp_umem_reg mr;
 	struct xsk_umem *umem;
-	socklen_t optlen;
 	void *map;
 	int err;
 
@@ -190,8 +256,7 @@ int xsk_umem__create_v0_0_4(struct xsk_umem **umem_ptr, void *umem_area,
 		goto out_socket;
 	}
 
-	optlen = sizeof(off);
-	err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	err = xsk_get_mmap_offsets(umem->fd, &off);
 	if (err) {
 		err = -errno;
 		goto out_socket;
@@ -499,7 +564,6 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
 	struct sockaddr_xdp sxdp = {};
 	struct xdp_mmap_offsets off;
 	struct xsk_socket *xsk;
-	socklen_t optlen;
 	int err;
 
 	if (!umem || !xsk_ptr || !rx || !tx)
@@ -558,8 +622,7 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
 		}
 	}
 
-	optlen = sizeof(off);
-	err = getsockopt(xsk->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	err = xsk_get_mmap_offsets(xsk->fd, &off);
 	if (err) {
 		err = -errno;
 		goto out_socket;
@@ -645,7 +708,6 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
 int xsk_umem__delete(struct xsk_umem *umem)
 {
 	struct xdp_mmap_offsets off;
-	socklen_t optlen;
 	int err;
 
 	if (!umem)
@@ -654,8 +716,7 @@ int xsk_umem__delete(struct xsk_umem *umem)
 	if (umem->refcount)
 		return -EBUSY;
 
-	optlen = sizeof(off);
-	err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	err = xsk_get_mmap_offsets(umem->fd, &off);
 	if (!err) {
 		munmap(umem->fill->ring - off.fr.desc,
 		       off.fr.desc + umem->config.fill_size * sizeof(__u64));
@@ -673,7 +734,6 @@ void xsk_socket__delete(struct xsk_socket *xsk)
 {
 	size_t desc_sz = sizeof(struct xdp_desc);
 	struct xdp_mmap_offsets off;
-	socklen_t optlen;
 	int err;
 
 	if (!xsk)
@@ -684,8 +744,7 @@ void xsk_socket__delete(struct xsk_socket *xsk)
 		close(xsk->prog_fd);
 	}
 
-	optlen = sizeof(off);
-	err = getsockopt(xsk->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	err = xsk_get_mmap_offsets(xsk->fd, &off);
 	if (!err) {
 		if (xsk->rx) {
 			munmap(xsk->rx->ring - off.rx.desc,
-- 
2.20.1

[PATCH AUTOSEL 5.4 080/205] libbpf: Don't use kernel-side u32 type in xsk.c

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit a566e35f1e8b4b3be1e96a804d1cca38b578167c ]

u32 is a kernel-side typedef. User-space library is supposed to use __u32.
This breaks Github's projection of libbpf. Do u32 -> __u32 fix.

Fixes: 94ff9ebb49a5 ("libbpf: Fix compatibility for kernels without need_wakeup")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191029055953.2461336-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index b29d37fba2b0..0c7386b0e42e 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -161,22 +161,22 @@ static void xsk_mmap_offsets_v1(struct xdp_mmap_offsets *off)
 	off->rx.producer = off_v1.rx.producer;
 	off->rx.consumer = off_v1.rx.consumer;
 	off->rx.desc = off_v1.rx.desc;
-	off->rx.flags = off_v1.rx.consumer + sizeof(u32);
+	off->rx.flags = off_v1.rx.consumer + sizeof(__u32);
 
 	off->tx.producer = off_v1.tx.producer;
 	off->tx.consumer = off_v1.tx.consumer;
 	off->tx.desc = off_v1.tx.desc;
-	off->tx.flags = off_v1.tx.consumer + sizeof(u32);
+	off->tx.flags = off_v1.tx.consumer + sizeof(__u32);
 
 	off->fr.producer = off_v1.fr.producer;
 	off->fr.consumer = off_v1.fr.consumer;
 	off->fr.desc = off_v1.fr.desc;
-	off->fr.flags = off_v1.fr.consumer + sizeof(u32);
+	off->fr.flags = off_v1.fr.consumer + sizeof(__u32);
 
 	off->cr.producer = off_v1.cr.producer;
 	off->cr.consumer = off_v1.cr.consumer;
 	off->cr.desc = off_v1.cr.desc;
-	off->cr.flags = off_v1.cr.consumer + sizeof(u32);
+	off->cr.flags = off_v1.cr.consumer + sizeof(__u32);
 }
 
 static int xsk_get_mmap_offsets(int fd, struct xdp_mmap_offsets *off)
-- 
2.20.1

[PATCH AUTOSEL 5.4 111/205] libbpf: Fix memory leak/double free issue

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 3dc5e059821376974177cc801d377e3fcdac6712 ]

Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.

Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index a267cd0c0ce2..d98838c5820c 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3220,6 +3220,7 @@ bpf_program__reloc_text(struct bpf_program *prog, struct bpf_object *obj,
 			pr_warning("oom in prog realloc\n");
 			return -ENOMEM;
 		}
+		prog->insns = new_insn;
 
 		if (obj->btf_ext) {
 			err = bpf_program_reloc_btf_ext(prog, obj,
@@ -3231,7 +3232,6 @@ bpf_program__reloc_text(struct bpf_program *prog, struct bpf_object *obj,
 
 		memcpy(new_insn + prog->insns_cnt, text->insns,
 		       text->insns_cnt * sizeof(*insn));
-		prog->insns = new_insn;
 		prog->main_prog_cnt = prog->insns_cnt;
 		prog->insns_cnt = new_cnt;
 		pr_debug("added %zd insn from %s to prog %s\n",
-- 
2.20.1

[PATCH AUTOSEL 5.4 112/205] libbpf: Fix potential overflow issue

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 4ee1135615713387b869dfd099ffdf8656be6784 ]

Fix a potential overflow issue found by LGTM analysis, based on Github libbpf
source code.

Fixes: 3d65014146c6 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index cbb933532981..9d0485959308 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -189,7 +189,7 @@ static void *
 alloc_zero_tailing_info(const void *orecord, __u32 cnt,
 			__u32 actual_rec_size, __u32 expected_rec_size)
 {
-	__u64 info_len = actual_rec_size * cnt;
+	__u64 info_len = (__u64)actual_rec_size * cnt;
 	void *info, *nrecord;
 	int i;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 113/205] libbpf: Fix another potential overflow issue in bpf_prog_linfo

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit dd3ab126379ec040b3edab8559f9c72de6ef9d29 ]

Fix few issues found by Coverity and LGTM.

Fixes: b053b439b72a ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-4-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf_prog_linfo.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/tools/lib/bpf/bpf_prog_linfo.c b/tools/lib/bpf/bpf_prog_linfo.c
index 8c67561c93b0..3ed1a27b5f7c 100644
--- a/tools/lib/bpf/bpf_prog_linfo.c
+++ b/tools/lib/bpf/bpf_prog_linfo.c
@@ -101,6 +101,7 @@ struct bpf_prog_linfo *bpf_prog_linfo__new(const struct bpf_prog_info *info)
 {
 	struct bpf_prog_linfo *prog_linfo;
 	__u32 nr_linfo, nr_jited_func;
+	__u64 data_sz;
 
 	nr_linfo = info->nr_line_info;
 
@@ -122,11 +123,11 @@ struct bpf_prog_linfo *bpf_prog_linfo__new(const struct bpf_prog_info *info)
 	/* Copy xlated line_info */
 	prog_linfo->nr_linfo = nr_linfo;
 	prog_linfo->rec_size = info->line_info_rec_size;
-	prog_linfo->raw_linfo = malloc(nr_linfo * prog_linfo->rec_size);
+	data_sz = (__u64)nr_linfo * prog_linfo->rec_size;
+	prog_linfo->raw_linfo = malloc(data_sz);
 	if (!prog_linfo->raw_linfo)
 		goto err_free;
-	memcpy(prog_linfo->raw_linfo, (void *)(long)info->line_info,
-	       nr_linfo * prog_linfo->rec_size);
+	memcpy(prog_linfo->raw_linfo, (void *)(long)info->line_info, data_sz);
 
 	nr_jited_func = info->nr_jited_ksyms;
 	if (!nr_jited_func ||
@@ -142,13 +143,12 @@ struct bpf_prog_linfo *bpf_prog_linfo__new(const struct bpf_prog_info *info)
 	/* Copy jited_line_info */
 	prog_linfo->nr_jited_func = nr_jited_func;
 	prog_linfo->jited_rec_size = info->jited_line_info_rec_size;
-	prog_linfo->raw_jited_linfo = malloc(nr_linfo *
-					     prog_linfo->jited_rec_size);
+	data_sz = (__u64)nr_linfo * prog_linfo->jited_rec_size;
+	prog_linfo->raw_jited_linfo = malloc(data_sz);
 	if (!prog_linfo->raw_jited_linfo)
 		goto err_free;
 	memcpy(prog_linfo->raw_jited_linfo,
-	       (void *)(long)info->jited_line_info,
-	       nr_linfo * prog_linfo->jited_rec_size);
+	       (void *)(long)info->jited_line_info, data_sz);
 
 	/* Number of jited_line_info per jited func */
 	prog_linfo->nr_jited_linfo_per_func = malloc(nr_jited_func *
-- 
2.20.1

[PATCH AUTOSEL 5.4 114/205] libbpf: Make btf__resolve_size logic always check size error condition

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 994021a7e08477f7e51285920aac99fc967fae8a ]

Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.

Fixes: 69eaab04c675 ("btf: extract BTF type size calculation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/btf.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 1aa189a9112a..d606a358480d 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -269,10 +269,9 @@ __s64 btf__resolve_size(const struct btf *btf, __u32 type_id)
 		t = btf__type_by_id(btf, type_id);
 	}
 
+done:
 	if (size < 0)
 		return -EINVAL;
-
-done:
 	if (nelems && size > UINT32_MAX / nelems)
 		return -E2BIG;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 155/205] libbpf: Fix call relocation offset calculation bug

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit a0d7da26ce86a25e97ae191cb90574ada6daea98 ]

When relocating subprogram call, libbpf doesn't take into account
relo->text_off, which comes from symbol's value. This generally works fine for
subprograms implemented as static functions, but breaks for global functions.

Taking a simplified test_pkt_access.c as an example:

__attribute__ ((noinline))
static int test_pkt_access_subprog1(volatile struct __sk_buff *skb)
{
        return skb->len * 2;
}

__attribute__ ((noinline))
static int test_pkt_access_subprog2(int val, volatile struct __sk_buff *skb)
{
        return skb->len + val;
}

SEC("classifier/test_pkt_access")
int test_pkt_access(struct __sk_buff *skb)
{
        if (test_pkt_access_subprog1(skb) != skb->len * 2)
                return TC_ACT_SHOT;
        if (test_pkt_access_subprog2(2, skb) != skb->len + 2)
                return TC_ACT_SHOT;
        return TC_ACT_UNSPEC;
}

When compiled, we get two relocations, pointing to '.text' symbol. .text has
st_value set to 0 (it points to the beginning of .text section):

0000000000000008  000000050000000a R_BPF_64_32            0000000000000000 .text
0000000000000040  000000050000000a R_BPF_64_32            0000000000000000 .text

test_pkt_access_subprog1 and test_pkt_access_subprog2 offsets (targets of two
calls) are encoded within call instruction's imm32 part as -1 and 2,
respectively:

0000000000000000 test_pkt_access_subprog1:
       0:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
       1:       64 00 00 00 01 00 00 00 w0 <<= 1
       2:       95 00 00 00 00 00 00 00 exit

0000000000000018 test_pkt_access_subprog2:
       3:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
       4:       04 00 00 00 02 00 00 00 w0 += 2
       5:       95 00 00 00 00 00 00 00 exit

0000000000000000 test_pkt_access:
       0:       bf 16 00 00 00 00 00 00 r6 = r1
===>   1:       85 10 00 00 ff ff ff ff call -1
       2:       bc 01 00 00 00 00 00 00 w1 = w0
       3:       b4 00 00 00 02 00 00 00 w0 = 2
       4:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
       5:       64 02 00 00 01 00 00 00 w2 <<= 1
       6:       5e 21 08 00 00 00 00 00 if w1 != w2 goto +8 <LBB0_3>
       7:       bf 61 00 00 00 00 00 00 r1 = r6
===>   8:       85 10 00 00 02 00 00 00 call 2
       9:       bc 01 00 00 00 00 00 00 w1 = w0
      10:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
      11:       04 02 00 00 02 00 00 00 w2 += 2
      12:       b4 00 00 00 ff ff ff ff w0 = -1
      13:       1e 21 01 00 00 00 00 00 if w1 == w2 goto +1 <LBB0_3>
      14:       b4 00 00 00 02 00 00 00 w0 = 2
0000000000000078 LBB0_3:
      15:       95 00 00 00 00 00 00 00 exit

Now, if we compile example with global functions, the setup changes.
Relocations are now against specifically test_pkt_access_subprog1 and
test_pkt_access_subprog2 symbols, with test_pkt_access_subprog2 pointing 24
bytes into its respective section (.text), i.e., 3 instructions in:

0000000000000008  000000070000000a R_BPF_64_32            0000000000000000 test_pkt_access_subprog1
0000000000000048  000000080000000a R_BPF_64_32            0000000000000018 test_pkt_access_subprog2

Calls instructions now encode offsets relative to function symbols and are both
set ot -1:

0000000000000000 test_pkt_access_subprog1:
       0:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
       1:       64 00 00 00 01 00 00 00 w0 <<= 1
       2:       95 00 00 00 00 00 00 00 exit

0000000000000018 test_pkt_access_subprog2:
       3:       61 20 00 00 00 00 00 00 r0 = *(u32 *)(r2 + 0)
       4:       0c 10 00 00 00 00 00 00 w0 += w1
       5:       95 00 00 00 00 00 00 00 exit

0000000000000000 test_pkt_access:
       0:       bf 16 00 00 00 00 00 00 r6 = r1
===>   1:       85 10 00 00 ff ff ff ff call -1
       2:       bc 01 00 00 00 00 00 00 w1 = w0
       3:       b4 00 00 00 02 00 00 00 w0 = 2
       4:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
       5:       64 02 00 00 01 00 00 00 w2 <<= 1
       6:       5e 21 09 00 00 00 00 00 if w1 != w2 goto +9 <LBB2_3>
       7:       b4 01 00 00 02 00 00 00 w1 = 2
       8:       bf 62 00 00 00 00 00 00 r2 = r6
===>   9:       85 10 00 00 ff ff ff ff call -1
      10:       bc 01 00 00 00 00 00 00 w1 = w0
      11:       61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
      12:       04 02 00 00 02 00 00 00 w2 += 2
      13:       b4 00 00 00 ff ff ff ff w0 = -1
      14:       1e 21 01 00 00 00 00 00 if w1 == w2 goto +1 <LBB2_3>
      15:       b4 00 00 00 02 00 00 00 w0 = 2
0000000000000080 LBB2_3:
      16:       95 00 00 00 00 00 00 00 exit

Thus the right formula to calculate target call offset after relocation should
take into account relocation's target symbol value (offset within section),
call instruction's imm32 offset, and (subtracting, to get relative instruction
offset) instruction index of call instruction itself. All that is shifted by
number of instructions in main program, given all sub-programs are copied over
after main program.

Convert few selftests relying on bpf-to-bpf calls to use global functions
instead of static ones.

Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191119224447.3781271-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c                             | 8 ++++++--
 tools/testing/selftests/bpf/progs/test_btf_haskv.c | 4 ++--
 tools/testing/selftests/bpf/progs/test_btf_newkv.c | 4 ++--
 tools/testing/selftests/bpf/progs/test_btf_nokv.c  | 4 ++--
 4 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index d98838c5820c..de2be6b2a748 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -1791,9 +1791,13 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr,
 				pr_warning("incorrect bpf_call opcode\n");
 				return -LIBBPF_ERRNO__RELOC;
 			}
+			if (sym.st_value % 8) {
+				pr_warn("bad call relo offset: %lu\n", sym.st_value);
+				return -LIBBPF_ERRNO__RELOC;
+			}
 			prog->reloc_desc[i].type = RELO_CALL;
 			prog->reloc_desc[i].insn_idx = insn_idx;
-			prog->reloc_desc[i].text_off = sym.st_value;
+			prog->reloc_desc[i].text_off = sym.st_value / 8;
 			obj->has_pseudo_calls = true;
 			continue;
 		}
@@ -3239,7 +3243,7 @@ bpf_program__reloc_text(struct bpf_program *prog, struct bpf_object *obj,
 			 prog->section_name);
 	}
 	insn = &prog->insns[relo->insn_idx];
-	insn->imm += prog->main_prog_cnt - relo->insn_idx;
+	insn->imm += relo->text_off + prog->main_prog_cnt - relo->insn_idx;
 	return 0;
 }
 
diff --git a/tools/testing/selftests/bpf/progs/test_btf_haskv.c b/tools/testing/selftests/bpf/progs/test_btf_haskv.c
index e5c79fe0ffdb..d65c61e64df2 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_haskv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_haskv.c
@@ -25,7 +25,7 @@ struct dummy_tracepoint_args {
 };
 
 __attribute__((noinline))
-static int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(struct dummy_tracepoint_args *arg)
 {
 	struct ipv_counts *counts;
 	int key = 0;
@@ -43,7 +43,7 @@ static int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-static int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(struct dummy_tracepoint_args *arg)
 {
 	return test_long_fname_2(arg);
 }
diff --git a/tools/testing/selftests/bpf/progs/test_btf_newkv.c b/tools/testing/selftests/bpf/progs/test_btf_newkv.c
index 5ee3622ddebb..8e83317db841 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_newkv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_newkv.c
@@ -33,7 +33,7 @@ struct dummy_tracepoint_args {
 };
 
 __attribute__((noinline))
-static int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(struct dummy_tracepoint_args *arg)
 {
 	struct ipv_counts *counts;
 	int key = 0;
@@ -56,7 +56,7 @@ static int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-static int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(struct dummy_tracepoint_args *arg)
 {
 	return test_long_fname_2(arg);
 }
diff --git a/tools/testing/selftests/bpf/progs/test_btf_nokv.c b/tools/testing/selftests/bpf/progs/test_btf_nokv.c
index 434188c37774..3f4422044759 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_nokv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_nokv.c
@@ -23,7 +23,7 @@ struct dummy_tracepoint_args {
 };
 
 __attribute__((noinline))
-static int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(struct dummy_tracepoint_args *arg)
 {
 	struct ipv_counts *counts;
 	int key = 0;
@@ -41,7 +41,7 @@ static int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-static int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(struct dummy_tracepoint_args *arg)
 {
 	return test_long_fname_2(arg);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 164/205] bpf: skmsg, fix potential psock NULL pointer dereference

[Sasha Levin]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 8163999db445021f2651a8a47b5632483e8722ea ]

Report from Dan Carpenter,

 net/core/skmsg.c:792 sk_psock_write_space()
 error: we previously assumed 'psock' could be null (see line 790)

 net/core/skmsg.c
   789 psock = sk_psock(sk);
   790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)))
 Check for NULL
   791 schedule_work(&psock->work);
   792 write_space = psock->saved_write_space;
                     ^^^^^^^^^^^^^^^^^^^^^^^^
   793          rcu_read_unlock();
   794          write_space(sk);

Ensure psock dereference on line 792 only occurs if psock is not null.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skmsg.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 0675d022584e..ded2d5227678 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -793,15 +793,18 @@ static void sk_psock_strp_data_ready(struct sock *sk)
 static void sk_psock_write_space(struct sock *sk)
 {
 	struct sk_psock *psock;
-	void (*write_space)(struct sock *sk);
+	void (*write_space)(struct sock *sk) = NULL;
 
 	rcu_read_lock();
 	psock = sk_psock(sk);
-	if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)))
-		schedule_work(&psock->work);
-	write_space = psock->saved_write_space;
+	if (likely(psock)) {
+		if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
+			schedule_work(&psock->work);
+		write_space = psock->saved_write_space;
+	}
 	rcu_read_unlock();
-	write_space(sk);
+	if (write_space)
+		write_space(sk);
 }
 
 int sk_psock_init_strp(struct sock *sk, struct sk_psock *psock)
-- 
2.20.1

[PATCH AUTOSEL 5.4 172/205] xdp: Fix cleanup on map free for devmap_hash map type

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 071cdecec57fb5d5df78e6a12114ad7bccea5b0e ]

Tetsuo pointed out that it was not only the device unregister hook that was
broken for devmap_hash types, it was also cleanup on map free. So better
fix this as well.

While we're at it, there's no reason to allocate the netdev_map array for
DEVMAP_HASH, so skip that and adjust the cost accordingly.

Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191121133612.430414-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/devmap.c | 74 ++++++++++++++++++++++++++++-----------------
 1 file changed, 46 insertions(+), 28 deletions(-)

diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index 3867864cdc2f..3d3d61b5985b 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -74,7 +74,7 @@ struct bpf_dtab_netdev {
 
 struct bpf_dtab {
 	struct bpf_map map;
-	struct bpf_dtab_netdev **netdev_map;
+	struct bpf_dtab_netdev **netdev_map; /* DEVMAP type only */
 	struct list_head __percpu *flush_list;
 	struct list_head list;
 
@@ -101,6 +101,12 @@ static struct hlist_head *dev_map_create_hash(unsigned int entries)
 	return hash;
 }
 
+static inline struct hlist_head *dev_map_index_hash(struct bpf_dtab *dtab,
+						    int idx)
+{
+	return &dtab->dev_index_head[idx & (dtab->n_buckets - 1)];
+}
+
 static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 {
 	int err, cpu;
@@ -120,8 +126,7 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 	bpf_map_init_from_attr(&dtab->map, attr);
 
 	/* make sure page count doesn't overflow */
-	cost = (u64) dtab->map.max_entries * sizeof(struct bpf_dtab_netdev *);
-	cost += sizeof(struct list_head) * num_possible_cpus();
+	cost = (u64) sizeof(struct list_head) * num_possible_cpus();
 
 	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
 		dtab->n_buckets = roundup_pow_of_two(dtab->map.max_entries);
@@ -129,6 +134,8 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 		if (!dtab->n_buckets) /* Overflow check */
 			return -EINVAL;
 		cost += (u64) sizeof(struct hlist_head) * dtab->n_buckets;
+	} else {
+		cost += (u64) dtab->map.max_entries * sizeof(struct bpf_dtab_netdev *);
 	}
 
 	/* if map size is larger than memlock limit, reject it */
@@ -143,24 +150,22 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 	for_each_possible_cpu(cpu)
 		INIT_LIST_HEAD(per_cpu_ptr(dtab->flush_list, cpu));
 
-	dtab->netdev_map = bpf_map_area_alloc(dtab->map.max_entries *
-					      sizeof(struct bpf_dtab_netdev *),
-					      dtab->map.numa_node);
-	if (!dtab->netdev_map)
-		goto free_percpu;
-
 	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
 		dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets);
 		if (!dtab->dev_index_head)
-			goto free_map_area;
+			goto free_percpu;
 
 		spin_lock_init(&dtab->index_lock);
+	} else {
+		dtab->netdev_map = bpf_map_area_alloc(dtab->map.max_entries *
+						      sizeof(struct bpf_dtab_netdev *),
+						      dtab->map.numa_node);
+		if (!dtab->netdev_map)
+			goto free_percpu;
 	}
 
 	return 0;
 
-free_map_area:
-	bpf_map_area_free(dtab->netdev_map);
 free_percpu:
 	free_percpu(dtab->flush_list);
 free_charge:
@@ -228,21 +233,40 @@ static void dev_map_free(struct bpf_map *map)
 			cond_resched();
 	}
 
-	for (i = 0; i < dtab->map.max_entries; i++) {
-		struct bpf_dtab_netdev *dev;
+	if (dtab->map.map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
+		for (i = 0; i < dtab->n_buckets; i++) {
+			struct bpf_dtab_netdev *dev;
+			struct hlist_head *head;
+			struct hlist_node *next;
 
-		dev = dtab->netdev_map[i];
-		if (!dev)
-			continue;
+			head = dev_map_index_hash(dtab, i);
 
-		free_percpu(dev->bulkq);
-		dev_put(dev->dev);
-		kfree(dev);
+			hlist_for_each_entry_safe(dev, next, head, index_hlist) {
+				hlist_del_rcu(&dev->index_hlist);
+				free_percpu(dev->bulkq);
+				dev_put(dev->dev);
+				kfree(dev);
+			}
+		}
+
+		kfree(dtab->dev_index_head);
+	} else {
+		for (i = 0; i < dtab->map.max_entries; i++) {
+			struct bpf_dtab_netdev *dev;
+
+			dev = dtab->netdev_map[i];
+			if (!dev)
+				continue;
+
+			free_percpu(dev->bulkq);
+			dev_put(dev->dev);
+			kfree(dev);
+		}
+
+		bpf_map_area_free(dtab->netdev_map);
 	}
 
 	free_percpu(dtab->flush_list);
-	bpf_map_area_free(dtab->netdev_map);
-	kfree(dtab->dev_index_head);
 	kfree(dtab);
 }
 
@@ -263,12 +287,6 @@ static int dev_map_get_next_key(struct bpf_map *map, void *key, void *next_key)
 	return 0;
 }
 
-static inline struct hlist_head *dev_map_index_hash(struct bpf_dtab *dtab,
-						    int idx)
-{
-	return &dtab->dev_index_head[idx & (dtab->n_buckets - 1)];
-}
-
 struct bpf_dtab_netdev *__dev_map_hash_lookup_elem(struct bpf_map *map, u32 key)
 {
 	struct bpf_dtab *dtab = container_of(map, struct bpf_dtab, map);
-- 
2.20.1

[PATCH AUTOSEL 5.4 179/205] bpf: Support pre-2.25-binutils objcopy for vmlinux BTF

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit da5fb18225b49b97bb37c51bcbbb2990a507c364 ]

If vmlinux BTF generation fails, but CONFIG_DEBUG_INFO_BTF is set,
.BTF section of vmlinux is empty and kernel will prohibit
BPF loading and return "in-kernel BTF is malformed".

--dump-section argument to binutils' objcopy was added in version 2.25.
When using pre-2.25 binutils, BTF generation silently fails. Convert
to --only-section which is present on pre-2.25 binutils.

Documentation/process/changes.rst states that binutils 2.21+
is supported, not sure those standards apply to BPF subsystem.

v2:
* exit and print an error if gen_btf fails (John Fastabend)

v3:
* resend with Andrii's Acked-by/Tested-by tags

Fixes: 341dfcf8d78ea ("btf: expose BTF info through sysfs")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191127161410.57327-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/link-vmlinux.sh | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 06495379fcd8..2998ddb323e3 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -127,7 +127,8 @@ gen_btf()
 		cut -d, -f1 | cut -d' ' -f2)
 	bin_format=$(LANG=C ${OBJDUMP} -f ${1} | grep 'file format' | \
 		awk '{print $4}')
-	${OBJCOPY} --dump-section .BTF=.btf.vmlinux.bin ${1} 2>/dev/null
+	${OBJCOPY} --set-section-flags .BTF=alloc -O binary \
+		--only-section=.BTF ${1} .btf.vmlinux.bin 2>/dev/null
 	${OBJCOPY} -I binary -O ${bin_format} -B ${bin_arch} \
 		--rename-section .data=.BTF .btf.vmlinux.bin ${2}
 }
@@ -253,6 +254,10 @@ btf_vmlinux_bin_o=""
 if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
 	if gen_btf .tmp_vmlinux.btf .btf.vmlinux.bin.o ; then
 		btf_vmlinux_bin_o=.btf.vmlinux.bin.o
+	else
+		echo >&2 "Failed to generate BTF for vmlinux"
+		echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
+		exit 1
 	fi
 fi
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 180/205] libbpf: Fix Makefile' libbpf symbol mismatch diagnostic

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit b568405856906ee4d9ba6284fd36f2928653a623 ]

Fix Makefile's diagnostic diff output when there is LIBBPF_API-versioned
symbols mismatch.

Fixes: 1bd63524593b ("libbpf: handle symbol versioning properly for libbpf.a")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191127200134.1360660-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 56ce6292071b..33e2638ef7f0 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -215,7 +215,7 @@ check_abi: $(OUTPUT)libbpf.so
 		     "versioned symbols in $^ ($(VERSIONED_SYM_COUNT))." \
 		     "Please make sure all LIBBPF_API symbols are"	 \
 		     "versioned in $(VERSION_SCRIPT)." >&2;		 \
-		readelf -s --wide $(OUTPUT)libbpf-in.o |		 \
+		readelf -s --wide $(BPF_IN_SHARED) |			 \
 		    cut -d "@" -f1 | sed 's/_v[0-9]_[0-9]_[0-9].*//' |	 \
 		    awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$8}'|   \
 		    sort -u > $(OUTPUT)libbpf_global_syms.tmp;		 \
-- 
2.20.1

[PATCH AUTOSEL 5.4 186/205] bpf: Force .BTF section start to zero when dumping from vmlinux

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit df786c9b947639aedbc7bb44b5dae2a7824af360 ]

While trying to figure out why fentry_fexit selftest doesn't pass for me
(old pahole, broken BTF), I found out that my latest patch can break vmlinux
.BTF generation. objcopy preserves section start when doing --only-section,
so there is a chance (depending on where pahole inserts .BTF section) to
have leading empty zeroes. Let's explicitly force section offset to zero.

Before:

$ objcopy --set-section-flags .BTF=alloc -O binary \
	--only-section=.BTF vmlinux .btf.vmlinux.bin
$ xxd .btf.vmlinux.bin | head -n1
00000000: 0000 0000 0000 0000 0000 0000 0000 0000  ................

After:

$ objcopy --change-section-address .BTF=0 \
	--set-section-flags .BTF=alloc -O binary \
	--only-section=.BTF vmlinux .btf.vmlinux.bin
$ xxd .btf.vmlinux.bin | head -n1
00000000: 9feb 0100 1800 0000 0000 0000 80e1 1c00  ................
          ^BTF magic

As part of this change, I'm also dropping '2>/dev/null' from objcopy
invocation to be able to catch possible other issues (objcopy doesn't
produce any warnings for me anymore, it did before with --dump-section).

Fixes: da5fb18225b4 ("bpf: Support pre-2.25-binutils objcopy for vmlinux BTF")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191127225759.39923-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/link-vmlinux.sh | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 2998ddb323e3..436379940356 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -127,8 +127,9 @@ gen_btf()
 		cut -d, -f1 | cut -d' ' -f2)
 	bin_format=$(LANG=C ${OBJDUMP} -f ${1} | grep 'file format' | \
 		awk '{print $4}')
-	${OBJCOPY} --set-section-flags .BTF=alloc -O binary \
-		--only-section=.BTF ${1} .btf.vmlinux.bin 2>/dev/null
+	${OBJCOPY} --change-section-address .BTF=0 \
+		--set-section-flags .BTF=alloc -O binary \
+		--only-section=.BTF ${1} .btf.vmlinux.bin
 	${OBJCOPY} -I binary -O ${bin_format} -B ${bin_arch} \
 		--rename-section .data=.BTF .btf.vmlinux.bin ${2}
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 191/205] samples/bpf: Fix broken xdp_rxq_info due to map order assumptions

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit edbca120a8cdfa5a5793707e33497aa5185875ca ]

In the days of using bpf_load.c the order in which the 'maps' sections
were defines in BPF side (*_kern.c) file, were used by userspace side
to identify the map via using the map order as an index. In effect the
order-index is created based on the order the maps sections are stored
in the ELF-object file, by the LLVM compiler.

This have also carried over in libbpf via API bpf_map__next(NULL, obj)
to extract maps in the order libbpf parsed the ELF-object file.

When BTF based maps were introduced a new section type ".maps" were
created. I found that the LLVM compiler doesn't create the ".maps"
sections in the order they are defined in the C-file. The order in the
ELF file is based on the order the map pointer is referenced in the code.

This combination of changes lead to xdp_rxq_info mixing up the map
file-descriptors in userspace, resulting in very broken behaviour, but
without warning the user.

This patch fix issue by instead using bpf_object__find_map_by_name()
to find maps via their names. (Note, this is the ELF name, which can
be longer than the name the kernel retains).

Fixes: be5bca44aa6b ("samples: bpf: convert some XDP samples from bpf_load to libbpf")
Fixes: 451d1dc886b5 ("samples: bpf: update map definition to new syntax BTF-defined map")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157529025128.29832.5953245340679936909.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/xdp_rxq_info_user.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/samples/bpf/xdp_rxq_info_user.c b/samples/bpf/xdp_rxq_info_user.c
index c7e4e45d824a..b88df17853b8 100644
--- a/samples/bpf/xdp_rxq_info_user.c
+++ b/samples/bpf/xdp_rxq_info_user.c
@@ -489,9 +489,9 @@ int main(int argc, char **argv)
 	if (bpf_prog_load_xattr(&prog_load_attr, &obj, &prog_fd))
 		return EXIT_FAIL;
 
-	map = bpf_map__next(NULL, obj);
-	stats_global_map = bpf_map__next(map, obj);
-	rx_queue_index_map = bpf_map__next(stats_global_map, obj);
+	map =  bpf_object__find_map_by_name(obj, "config_map");
+	stats_global_map = bpf_object__find_map_by_name(obj, "stats_global_map");
+	rx_queue_index_map = bpf_object__find_map_by_name(obj, "rx_queue_index_map");
 	if (!map || !stats_global_map || !rx_queue_index_map) {
 		printf("finding a map in obj file failed\n");
 		return EXIT_FAIL;
-- 
2.20.1