[PATCH AUTOSEL 5.12 026/160] bpf: Check for BPF_F_ADJ_ROOM_FIXED_GSO when bpf_skb_change_proto

[PATCH AUTOSEL 5.12 026/160] bpf: Check for BPF_F_ADJ_ROOM_FIXED_GSO when bpf_skb_change_proto

[Sasha Levin]

From: Dongseok Yi <dseok.yi@samsung.com>

[ Upstream commit fa7b83bf3b156c767f3e4a25bbf3817b08f3ff8e ]

In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
coalesced packet payload can be > MSS, but < MSS + 20.

bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
length. After then tcp_gso_segment checks for the payload length if it
is <= MSS. The condition is causing the packet to be dropped.

tcp_gso_segment():
        [...]
        mss = skb_shinfo(skb)->gso_size;
        if (unlikely(skb->len <= mss))
                goto out;
        [...]

Allow to upgrade/downgrade MSS only when BPF_F_ADJ_ROOM_FIXED_GSO is
not set.

Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/1620804453-57566-1-git-send-email-dseok.yi@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 52f4359efbd2..849b08350a39 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3238,7 +3238,7 @@ static int bpf_skb_net_hdr_pop(struct sk_buff *skb, u32 off, u32 len)
 	return ret;
 }
 
-static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
+static int bpf_skb_proto_4_to_6(struct sk_buff *skb, u64 flags)
 {
 	const u32 len_diff = sizeof(struct ipv6hdr) - sizeof(struct iphdr);
 	u32 off = skb_mac_header_len(skb);
@@ -3267,7 +3267,9 @@ static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 		}
 
 		/* Due to IPv6 header, MSS needs to be downgraded. */
-		skb_decrease_gso_size(shinfo, len_diff);
+		if (!(flags & BPF_F_ADJ_ROOM_FIXED_GSO))
+			skb_decrease_gso_size(shinfo, len_diff);
+
 		/* Header must be checked, and gso_segs recomputed. */
 		shinfo->gso_type |= SKB_GSO_DODGY;
 		shinfo->gso_segs = 0;
@@ -3279,7 +3281,7 @@ static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 	return 0;
 }
 
-static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
+static int bpf_skb_proto_6_to_4(struct sk_buff *skb, u64 flags)
 {
 	const u32 len_diff = sizeof(struct ipv6hdr) - sizeof(struct iphdr);
 	u32 off = skb_mac_header_len(skb);
@@ -3308,7 +3310,9 @@ static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
 		}
 
 		/* Due to IPv4 header, MSS can be upgraded. */
-		skb_increase_gso_size(shinfo, len_diff);
+		if (!(flags & BPF_F_ADJ_ROOM_FIXED_GSO))
+			skb_increase_gso_size(shinfo, len_diff);
+
 		/* Header must be checked, and gso_segs recomputed. */
 		shinfo->gso_type |= SKB_GSO_DODGY;
 		shinfo->gso_segs = 0;
@@ -3320,17 +3324,17 @@ static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
 	return 0;
 }
 
-static int bpf_skb_proto_xlat(struct sk_buff *skb, __be16 to_proto)
+static int bpf_skb_proto_xlat(struct sk_buff *skb, __be16 to_proto, u64 flags)
 {
 	__be16 from_proto = skb->protocol;
 
 	if (from_proto == htons(ETH_P_IP) &&
 	      to_proto == htons(ETH_P_IPV6))
-		return bpf_skb_proto_4_to_6(skb);
+		return bpf_skb_proto_4_to_6(skb, flags);
 
 	if (from_proto == htons(ETH_P_IPV6) &&
 	      to_proto == htons(ETH_P_IP))
-		return bpf_skb_proto_6_to_4(skb);
+		return bpf_skb_proto_6_to_4(skb, flags);
 
 	return -ENOTSUPP;
 }
@@ -3340,7 +3344,7 @@ BPF_CALL_3(bpf_skb_change_proto, struct sk_buff *, skb, __be16, proto,
 {
 	int ret;
 
-	if (unlikely(flags))
+	if (unlikely(flags & ~(BPF_F_ADJ_ROOM_FIXED_GSO)))
 		return -EINVAL;
 
 	/* General idea is that this helper does the basic groundwork
@@ -3360,7 +3364,7 @@ BPF_CALL_3(bpf_skb_change_proto, struct sk_buff *, skb, __be16, proto,
 	 * that. For offloads, we mark packet as dodgy, so that headers
 	 * need to be verified first.
 	 */
-	ret = bpf_skb_proto_xlat(skb, proto);
+	ret = bpf_skb_proto_xlat(skb, proto, flags);
 	bpf_compute_data_pointers(skb);
 	return ret;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.12 098/160] bpf: Fix up register-based shifts in interpreter to silence KUBSAN

[Sasha Levin]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 28131e9d933339a92f78e7ab6429f4aaaa07061c ]

syzbot reported a shift-out-of-bounds that KUBSAN observed in the
interpreter:

  [...]
  UBSAN: shift-out-of-bounds in kernel/bpf/core.c:1420:2
  shift exponent 255 is too large for 64-bit type 'long long unsigned int'
  CPU: 1 PID: 11097 Comm: syz-executor.4 Not tainted 5.12.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x141/0x1d7 lib/dump_stack.c:120
   ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
   __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
   ___bpf_prog_run.cold+0x19/0x56c kernel/bpf/core.c:1420
   __bpf_prog_run32+0x8f/0xd0 kernel/bpf/core.c:1735
   bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
   bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
   bpf_prog_run_clear_cb include/linux/filter.h:755 [inline]
   run_filter+0x1a1/0x470 net/packet/af_packet.c:2031
   packet_rcv+0x313/0x13e0 net/packet/af_packet.c:2104
   dev_queue_xmit_nit+0x7c2/0xa90 net/core/dev.c:2387
   xmit_one net/core/dev.c:3588 [inline]
   dev_hard_start_xmit+0xad/0x920 net/core/dev.c:3609
   __dev_queue_xmit+0x2121/0x2e00 net/core/dev.c:4182
   __bpf_tx_skb net/core/filter.c:2116 [inline]
   __bpf_redirect_no_mac net/core/filter.c:2141 [inline]
   __bpf_redirect+0x548/0xc80 net/core/filter.c:2164
   ____bpf_clone_redirect net/core/filter.c:2448 [inline]
   bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2420
   ___bpf_prog_run+0x34e1/0x77d0 kernel/bpf/core.c:1523
   __bpf_prog_run512+0x99/0xe0 kernel/bpf/core.c:1737
   bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
   bpf_test_run+0x3ed/0xc50 net/bpf/test_run.c:50
   bpf_prog_test_run_skb+0xabc/0x1c50 net/bpf/test_run.c:582
   bpf_prog_test_run kernel/bpf/syscall.c:3127 [inline]
   __do_sys_bpf+0x1ea9/0x4f00 kernel/bpf/syscall.c:4406
   do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  [...]

Generally speaking, KUBSAN reports from the kernel should be fixed.
However, in case of BPF, this particular report caused concerns since
the large shift is not wrong from BPF point of view, just undefined.
In the verifier, K-based shifts that are >= {64,32} (depending on the
bitwidth of the instruction) are already rejected. The register-based
cases were not given their content might not be known at verification
time. Ideas such as verifier instruction rewrite with an additional
AND instruction for the source register were brought up, but regularly
rejected due to the additional runtime overhead they incur.

As Edward Cree rightly put it:

  Shifts by more than insn bitness are legal in the BPF ISA; they are
  implementation-defined behaviour [of the underlying architecture],
  rather than UB, and have been made legal for performance reasons.
  Each of the JIT backends compiles the BPF shift operations to machine
  instructions which produce implementation-defined results in such a
  case; the resulting contents of the register may be arbitrary but
  program behaviour as a whole remains defined.

  Guard checks in the fast path (i.e. affecting JITted code) will thus
  not be accepted.

  The case of division by zero is not truly analogous here, as division
  instructions on many of the JIT-targeted architectures will raise a
  machine exception / fault on division by zero, whereas (to the best
  of my knowledge) none will do so on an out-of-bounds shift.

Given the KUBSAN report only affects the BPF interpreter, but not JITs,
one solution is to add the ANDs with 63 or 31 into ___bpf_prog_run().
That would make the shifts defined, and thus shuts up KUBSAN, and the
compiler would optimize out the AND on any CPU that interprets the shift
amounts modulo the width anyway (e.g., confirmed from disassembly that
on x86-64 and arm64 the generated interpreter code is the same before
and after this fix).

The BPF interpreter is slow path, and most likely compiled out anyway
as distros select BPF_JIT_ALWAYS_ON to avoid speculative execution of
BPF instructions by the interpreter. Given the main argument was to
avoid sacrificing performance, the fact that the AND is optimized away
from compiler for mainstream archs helps as well as a solution moving
forward. Also add a comment on LSH/RSH/ARSH translation for JIT authors
to provide guidance when they see the ___bpf_prog_run() interpreter
code and use it as a model for a new JIT backend.

Reported-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com
Reported-by: Kurt Manucredo <fuzzybritches0@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com
Cc: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/bpf/0000000000008f912605bd30d5d7@google.com
Link: https://lore.kernel.org/bpf/bac16d8d-c174-bdc4-91bd-bfa62b410190@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 61 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 43 insertions(+), 18 deletions(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 75244ecb2389..952d98beda63 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1399,29 +1399,54 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 select_insn:
 	goto *jumptable[insn->code];
 
-	/* ALU */
-#define ALU(OPCODE, OP)			\
-	ALU64_##OPCODE##_X:		\
-		DST = DST OP SRC;	\
-		CONT;			\
-	ALU_##OPCODE##_X:		\
-		DST = (u32) DST OP (u32) SRC;	\
-		CONT;			\
-	ALU64_##OPCODE##_K:		\
-		DST = DST OP IMM;		\
-		CONT;			\
-	ALU_##OPCODE##_K:		\
-		DST = (u32) DST OP (u32) IMM;	\
+	/* Explicitly mask the register-based shift amounts with 63 or 31
+	 * to avoid undefined behavior. Normally this won't affect the
+	 * generated code, for example, in case of native 64 bit archs such
+	 * as x86-64 or arm64, the compiler is optimizing the AND away for
+	 * the interpreter. In case of JITs, each of the JIT backends compiles
+	 * the BPF shift operations to machine instructions which produce
+	 * implementation-defined results in such a case; the resulting
+	 * contents of the register may be arbitrary, but program behaviour
+	 * as a whole remains defined. In other words, in case of JIT backends,
+	 * the AND must /not/ be added to the emitted LSH/RSH/ARSH translation.
+	 */
+	/* ALU (shifts) */
+#define SHT(OPCODE, OP)					\
+	ALU64_##OPCODE##_X:				\
+		DST = DST OP (SRC & 63);		\
+		CONT;					\
+	ALU_##OPCODE##_X:				\
+		DST = (u32) DST OP ((u32) SRC & 31);	\
+		CONT;					\
+	ALU64_##OPCODE##_K:				\
+		DST = DST OP IMM;			\
+		CONT;					\
+	ALU_##OPCODE##_K:				\
+		DST = (u32) DST OP (u32) IMM;		\
+		CONT;
+	/* ALU (rest) */
+#define ALU(OPCODE, OP)					\
+	ALU64_##OPCODE##_X:				\
+		DST = DST OP SRC;			\
+		CONT;					\
+	ALU_##OPCODE##_X:				\
+		DST = (u32) DST OP (u32) SRC;		\
+		CONT;					\
+	ALU64_##OPCODE##_K:				\
+		DST = DST OP IMM;			\
+		CONT;					\
+	ALU_##OPCODE##_K:				\
+		DST = (u32) DST OP (u32) IMM;		\
 		CONT;
-
 	ALU(ADD,  +)
 	ALU(SUB,  -)
 	ALU(AND,  &)
 	ALU(OR,   |)
-	ALU(LSH, <<)
-	ALU(RSH, >>)
 	ALU(XOR,  ^)
 	ALU(MUL,  *)
+	SHT(LSH, <<)
+	SHT(RSH, >>)
+#undef SHT
 #undef ALU
 	ALU_NEG:
 		DST = (u32) -DST;
@@ -1446,13 +1471,13 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 		insn++;
 		CONT;
 	ALU_ARSH_X:
-		DST = (u64) (u32) (((s32) DST) >> SRC);
+		DST = (u64) (u32) (((s32) DST) >> (SRC & 31));
 		CONT;
 	ALU_ARSH_K:
 		DST = (u64) (u32) (((s32) DST) >> IMM);
 		CONT;
 	ALU64_ARSH_X:
-		(*(s64 *) &DST) >>= SRC;
+		(*(s64 *) &DST) >>= (SRC & 63);
 		CONT;
 	ALU64_ARSH_K:
 		(*(s64 *) &DST) >>= IMM;
-- 
2.30.2

[PATCH AUTOSEL 5.12 138/160] media, bpf: Do not copy more entries than user space requested

[Sasha Levin]

From: Sean Young <sean@mess.org>

[ Upstream commit 647d446d66e493d23ca1047fa8492b0269674530 ]

The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.

Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/bpf-lirc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c
index 3fe3edd80876..afae0afe3f81 100644
--- a/drivers/media/rc/bpf-lirc.c
+++ b/drivers/media/rc/bpf-lirc.c
@@ -326,7 +326,8 @@ int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr)
 	}
 
 	if (attr->query.prog_cnt != 0 && prog_ids && cnt)
-		ret = bpf_prog_array_copy_to_user(progs, prog_ids, cnt);
+		ret = bpf_prog_array_copy_to_user(progs, prog_ids,
+						  attr->query.prog_cnt);
 
 unlock:
 	mutex_unlock(&ir_raw_handler_lock);
-- 
2.30.2

[PATCH AUTOSEL 5.12 139/160] net: retrieve netns cookie via getsocketopt

[Sasha Levin]

From: Martynas Pumputis <m@lambda.lt>

[ Upstream commit e8b9eab99232c4e62ada9d7976c80fd5e8118289 ]

It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.

Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.

Thus, this is following up on Eric's commit 3d368ab87cf6 ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE.  This is also in line in how we retrieve socket cookie
via SO_COOKIE.

  [1] https://kind.sigs.k8s.io/

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/uapi/asm/socket.h  | 2 ++
 arch/mips/include/uapi/asm/socket.h   | 2 ++
 arch/parisc/include/uapi/asm/socket.h | 2 ++
 arch/sparc/include/uapi/asm/socket.h  | 2 ++
 include/uapi/asm-generic/socket.h     | 2 ++
 net/core/sock.c                       | 7 +++++++
 6 files changed, 17 insertions(+)

diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 57420356ce4c..6b3daba60987 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -127,6 +127,8 @@
 #define SO_PREFER_BUSY_POLL	69
 #define SO_BUSY_POLL_BUDGET	70
 
+#define SO_NETNS_COOKIE		71
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index 2d949969313b..cdf404a831b2 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -138,6 +138,8 @@
 #define SO_PREFER_BUSY_POLL	69
 #define SO_BUSY_POLL_BUDGET	70
 
+#define SO_NETNS_COOKIE		71
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h
index f60904329bbc..5b5351cdcb33 100644
--- a/arch/parisc/include/uapi/asm/socket.h
+++ b/arch/parisc/include/uapi/asm/socket.h
@@ -119,6 +119,8 @@
 #define SO_PREFER_BUSY_POLL	0x4043
 #define SO_BUSY_POLL_BUDGET	0x4044
 
+#define SO_NETNS_COOKIE		0x4045
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/sparc/include/uapi/asm/socket.h b/arch/sparc/include/uapi/asm/socket.h
index 848a22fbac20..92675dc380fa 100644
--- a/arch/sparc/include/uapi/asm/socket.h
+++ b/arch/sparc/include/uapi/asm/socket.h
@@ -120,6 +120,8 @@
 #define SO_PREFER_BUSY_POLL	 0x0048
 #define SO_BUSY_POLL_BUDGET	 0x0049
 
+#define SO_NETNS_COOKIE          0x0050
+
 #if !defined(__KERNEL__)
 
 
diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h
index 4dcd13d097a9..d588c244ec2f 100644
--- a/include/uapi/asm-generic/socket.h
+++ b/include/uapi/asm-generic/socket.h
@@ -122,6 +122,8 @@
 #define SO_PREFER_BUSY_POLL	69
 #define SO_BUSY_POLL_BUDGET	70
 
+#define SO_NETNS_COOKIE		71
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
diff --git a/net/core/sock.c b/net/core/sock.c
index a266760cd65e..60750f9ae32d 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1622,6 +1622,13 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		v.val = sk->sk_bound_dev_if;
 		break;
 
+	case SO_NETNS_COOKIE:
+		lv = sizeof(u64);
+		if (len != lv)
+			return -EINVAL;
+		v.val64 = sock_net(sk)->net_cookie;
+		break;
+
 	default:
 		/* We implement the SO_SNDLOWAT etc to not be settable
 		 * (1003.1g 7).
-- 
2.30.2

[PATCH AUTOSEL 5.12 154/160] bpf: Fix false positive kmemleak report in bpf_ringbuf_area_alloc()

[Sasha Levin]

From: Rustam Kovhaev <rkovhaev@gmail.com>

[ Upstream commit ccff81e1d028bbbf8573d3364a87542386c707bf ]

kmemleak scans struct page, but it does not scan the page content. If we
allocate some memory with kmalloc(), then allocate page with alloc_page(),
and if we put kmalloc pointer somewhere inside that page, kmemleak will
report kmalloc pointer as a false positive.

We can instruct kmemleak to scan the memory area by calling kmemleak_alloc()
and kmemleak_free(), but part of struct bpf_ringbuf is mmaped to user space,
and if struct bpf_ringbuf changes we would have to revisit and review size
argument in kmemleak_alloc(), because we do not want kmemleak to scan the
user space memory. Let's simplify things and use kmemleak_not_leak() here.

For posterity, also adding additional prior analysis from Andrii:

  I think either kmemleak or syzbot are misreporting this. I've added a
  bunch of printks around all allocations performed by BPF ringbuf. [...]
  On repro side I get these two warnings:

  [vmuser@archvm bpf]$ sudo ./repro
  BUG: memory leak
  unreferenced object 0xffff88810d538c00 (size 64):
    comm "repro", pid 2140, jiffies 4294692933 (age 14.540s)
    hex dump (first 32 bytes):
      00 af 19 04 00 ea ff ff c0 ae 19 04 00 ea ff ff  ................
      80 ae 19 04 00 ea ff ff c0 29 2e 04 00 ea ff ff  .........)......
    backtrace:
      [<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
      [<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
      [<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
      [<00000000f601d565>] do_syscall_64+0x2d/0x40
      [<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae

  BUG: memory leak
  unreferenced object 0xffff88810d538c80 (size 64):
    comm "repro", pid 2143, jiffies 4294699025 (age 8.448s)
    hex dump (first 32 bytes):
      80 aa 19 04 00 ea ff ff 00 ab 19 04 00 ea ff ff  ................
      c0 ab 19 04 00 ea ff ff 80 44 28 04 00 ea ff ff  .........D(.....
    backtrace:
      [<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
      [<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
      [<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
      [<00000000f601d565>] do_syscall_64+0x2d/0x40
      [<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae

  Note that both reported leaks (ffff88810d538c80 and ffff88810d538c00)
  correspond to pages array bpf_ringbuf is allocating and tracking properly
  internally. Note also that syzbot repro doesn't close FD of created BPF
  ringbufs, and even when ./repro itself exits with error, there are still
  two forked processes hanging around in my system. So clearly ringbuf maps
  are alive at that point. So reporting any memory leak looks weird at that
  point, because that memory is being used by active referenced BPF ringbuf.

  It's also a question why repro doesn't clean up its forks. But if I do a
  `pkill repro`, I do see that all the allocated memory is /properly/ cleaned
  up [and the] "leaks" are deallocated properly.

  BTW, if I add close() right after bpf() syscall in syzbot repro, I see that
  everything is immediately deallocated, like designed. And no memory leak
  is reported. So I don't think the problem is anywhere in bpf_ringbuf code,
  rather in the leak detection and/or repro itself.

Reported-by: syzbot+5d895828587f49e7fe9b@syzkaller.appspotmail.com
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
[ Daniel: also included analysis from Andrii to the commit log ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+5d895828587f49e7fe9b@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzYk+dqs+jwu6VKXP-RttcTEGFe+ySTGWT9CRNkagDiJVA@mail.gmail.com
Link: https://lore.kernel.org/lkml/YNTAqiE7CWJhOK2M@nuc10
Link: https://lore.kernel.org/lkml/20210615101515.GC26027@arm.com
Link: https://syzkaller.appspot.com/bug?extid=5d895828587f49e7fe9b
Link: https://lore.kernel.org/bpf/20210626181156.1873604-1-rkovhaev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/ringbuf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/bpf/ringbuf.c b/kernel/bpf/ringbuf.c
index 84b3b35fc0d0..9e0c10c6892a 100644
--- a/kernel/bpf/ringbuf.c
+++ b/kernel/bpf/ringbuf.c
@@ -8,6 +8,7 @@
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
 #include <linux/poll.h>
+#include <linux/kmemleak.h>
 #include <uapi/linux/btf.h>
 
 #define RINGBUF_CREATE_FLAG_MASK (BPF_F_NUMA_NODE)
@@ -105,6 +106,7 @@ static struct bpf_ringbuf *bpf_ringbuf_area_alloc(size_t data_sz, int numa_node)
 	rb = vmap(pages, nr_meta_pages + 2 * nr_data_pages,
 		  VM_ALLOC | VM_USERMAP, PAGE_KERNEL);
 	if (rb) {
+		kmemleak_not_leak(pages);
 		rb->pages = pages;
 		rb->nr_pages = nr_pages;
 		return rb;
-- 
2.30.2