[PATCH AUTOSEL 6.12 01/28] bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic

[PATCH AUTOSEL 6.12 01/28] bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 98671a0fd1f14e4a518ee06b19037c20014900eb ]

For all BPF maps we ensure that VM_MAYWRITE is cleared when
memory-mapping BPF map contents as initially read-only VMA. This is
because in some cases BPF verifier relies on the underlying data to not
be modified afterwards by user space, so once something is mapped
read-only, it shouldn't be re-mmap'ed as read-write.

As such, it's not necessary to check VM_MAYWRITE in bpf_map_mmap() and
map->ops->map_mmap() callbacks: VM_WRITE should be consistently set for
read-write mappings, and if VM_WRITE is not set, there is no way for
user space to upgrade read-only mapping to read-write one.

This patch cleans up this VM_WRITE vs VM_MAYWRITE handling within
bpf_map_mmap(), which is an entry point for any BPF map mmap()-ing
logic. We also drop unnecessary sanitization of VM_MAYWRITE in BPF
ringbuf's map_mmap() callback implementation, as it is already performed
by common code in bpf_map_mmap().

Note, though, that in bpf_map_mmap_{open,close}() callbacks we can't
drop VM_MAYWRITE use, because it's possible (and is outside of
subsystem's control) to have initially read-write memory mapping, which
is subsequently dropped to read-only by user space through mprotect().
In such case, from BPF verifier POV it's read-write data throughout the
lifetime of BPF map, and is counted as "active writer".

But its VMAs will start out as VM_WRITE|VM_MAYWRITE, then mprotect() can
change it to just VM_MAYWRITE (and no VM_WRITE), so when its finally
munmap()'ed and bpf_map_mmap_close() is called, vm_flags will be just
VM_MAYWRITE, but we still need to decrement active writer count with
bpf_map_write_active_dec() as it's still considered to be a read-write
mapping by the rest of BPF subsystem.

Similar reasoning applies to bpf_map_mmap_open(), which is called
whenever mmap(), munmap(), and/or mprotect() forces mm subsystem to
split original VMA into multiple discontiguous VMAs.

Memory-mapping handling is a bit tricky, yes.

Cc: Jann Horn <jannh@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/ringbuf.c |  4 ----
 kernel/bpf/syscall.c | 10 ++++++++--
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/kernel/bpf/ringbuf.c b/kernel/bpf/ringbuf.c
index e1cfe890e0be6..1499d8caa9a35 100644
--- a/kernel/bpf/ringbuf.c
+++ b/kernel/bpf/ringbuf.c
@@ -268,8 +268,6 @@ static int ringbuf_map_mmap_kern(struct bpf_map *map, struct vm_area_struct *vma
 		/* allow writable mapping for the consumer_pos only */
 		if (vma->vm_pgoff != 0 || vma->vm_end - vma->vm_start != PAGE_SIZE)
 			return -EPERM;
-	} else {
-		vm_flags_clear(vma, VM_MAYWRITE);
 	}
 	/* remap_vmalloc_range() checks size and offset constraints */
 	return remap_vmalloc_range(vma, rb_map->rb,
@@ -289,8 +287,6 @@ static int ringbuf_map_mmap_user(struct bpf_map *map, struct vm_area_struct *vma
 			 * position, and the ring buffer data itself.
 			 */
 			return -EPERM;
-	} else {
-		vm_flags_clear(vma, VM_MAYWRITE);
 	}
 	/* remap_vmalloc_range() checks size and offset constraints */
 	return remap_vmalloc_range(vma, rb_map->rb, vma->vm_pgoff + RINGBUF_PGOFF);
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 368ae8d231d41..fa43f26ce0dac 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -966,15 +966,21 @@ static int bpf_map_mmap(struct file *filp, struct vm_area_struct *vma)
 	vma->vm_ops = &bpf_map_default_vmops;
 	vma->vm_private_data = map;
 	vm_flags_clear(vma, VM_MAYEXEC);
+	/* If mapping is read-only, then disallow potentially re-mapping with
+	 * PROT_WRITE by dropping VM_MAYWRITE flag. This VM_MAYWRITE clearing
+	 * means that as far as BPF map's memory-mapped VMAs are concerned,
+	 * VM_WRITE and VM_MAYWRITE and equivalent, if one of them is set,
+	 * both should be set, so we can forget about VM_MAYWRITE and always
+	 * check just VM_WRITE
+	 */
 	if (!(vma->vm_flags & VM_WRITE))
-		/* disallow re-mapping with PROT_WRITE */
 		vm_flags_clear(vma, VM_MAYWRITE);
 
 	err = map->ops->map_mmap(map, vma);
 	if (err)
 		goto out;
 
-	if (vma->vm_flags & VM_MAYWRITE)
+	if (vma->vm_flags & VM_WRITE)
 		bpf_map_write_active_inc(map);
 out:
 	mutex_unlock(&map->freeze_mutex);
-- 
2.39.5

[PATCH AUTOSEL 6.12 02/28] selftests/bpf: Fix invalid flag of recv()

[Sasha Levin]

From: Jiayuan Chen <mrpre@163.com>

[ Upstream commit a0c11149509aa905aeec10cf9998091443472b0b ]

SOCK_NONBLOCK flag is only effective during socket creation, not during
recv. Use MSG_DONTWAIT instead.

Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-5-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/sockmap_basic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
index 82bfb266741cf..fb08c565d6aad 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
@@ -492,8 +492,8 @@ static void test_sockmap_skb_verdict_shutdown(void)
 	if (!ASSERT_EQ(err, 1, "epoll_wait(fd)"))
 		goto out_close;
 
-	n = recv(c1, &b, 1, SOCK_NONBLOCK);
-	ASSERT_EQ(n, 0, "recv_timeout(fin)");
+	n = recv(c1, &b, 1, MSG_DONTWAIT);
+	ASSERT_EQ(n, 0, "recv(fin)");
 out_close:
 	close(c1);
 	close(p1);
@@ -546,7 +546,7 @@ static void test_sockmap_skb_verdict_fionread(bool pass_prog)
 	ASSERT_EQ(avail, expected, "ioctl(FIONREAD)");
 	/* On DROP test there will be no data to read */
 	if (pass_prog) {
-		recvd = recv_timeout(c1, &buf, sizeof(buf), SOCK_NONBLOCK, IO_TIMEOUT_SEC);
+		recvd = recv_timeout(c1, &buf, sizeof(buf), MSG_DONTWAIT, IO_TIMEOUT_SEC);
 		ASSERT_EQ(recvd, sizeof(buf), "recv_timeout(c0)");
 	}
 
-- 
2.39.5