From: Harshitha Ramamurthy <hramamurthy@google.com>
To: netdev@vger.kernel.org
Cc: joshwash@google.com, hramamurthy@google.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, ast@kernel.org,
daniel@iogearbox.net, hawk@kernel.org, john.fastabend@gmail.com,
sdf@fomichev.me, jordanrhee@google.com, willemb@google.com,
nktgrg@google.com, maolson@google.com, thostet@google.com,
jacob.e.keller@intel.com, debarghyak@google.com,
kees@kernel.org, bpf@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 14/15] gve: add ctrl ops to for queue operations
Date: Mon, 3 Aug 2026 18:46:29 +0000 [thread overview]
Message-ID: <20260803184630.3813311-15-hramamurthy@google.com> (raw)
In-Reply-To: <20260803184630.3813311-1-hramamurthy@google.com>
Add the next few control ops to
- create queues
- destroy queues
These changes are just moving existing code into ops, no functional
change.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
- remove double logging in the create queues path
drivers/net/ethernet/google/gve/gve.h | 4 ++
drivers/net/ethernet/google/gve/gve_adminq.c | 50 ++++++++++++++++++++
drivers/net/ethernet/google/gve/gve_adminq.h | 3 +-
drivers/net/ethernet/google/gve/gve_dqo.h | 2 +-
drivers/net/ethernet/google/gve/gve_main.c | 48 +++++--------------
5 files changed, 68 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 352755660138..38b93238e2ca 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -844,6 +844,8 @@ struct gve_device_info {
* @configure_rss: Set up default RSS configuration
* @setup_stats_report: Set up DMA region for stats report (AdminQ only)
* @reset_flow_rules: Flush all flow rules from device
+ * @create_queues: Sends commands to the device to create TX/RX queues.
+ * @destroy_queues: Sends commands to the device to destroy TX/RX queues.
*/
struct gve_ctrl_ops {
int (*map_db_bar)(struct gve_priv *priv);
@@ -862,6 +864,8 @@ struct gve_ctrl_ops {
dma_addr_t stats_report_addr,
u64 interval_ms); /* AQ-specific */
int (*reset_flow_rules)(struct gve_priv *priv);
+ int (*create_queues)(struct gve_priv *priv);
+ int (*destroy_queues)(struct gve_priv *priv);
};
struct gve_priv {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 4299a3931789..b04968257355 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -941,6 +941,30 @@ static void gve_set_default_rss_sizes(struct gve_priv *priv)
}
}
+int gve_adminq_destroy_queues(struct gve_priv *priv)
+{
+ int num_tx_queues = gve_num_tx_queues(priv);
+ int err;
+
+ err = gve_adminq_destroy_tx_queues(priv, 0, num_tx_queues);
+ if (err) {
+ netif_err(priv, drv, priv->dev,
+ "failed to destroy tx queues\n");
+ /* This failure will trigger a reset - no need to clean up */
+ return err;
+ }
+ netif_dbg(priv, drv, priv->dev, "destroyed tx queues\n");
+ err = gve_adminq_destroy_rx_queues(priv, priv->rx_cfg.num_queues);
+ if (err) {
+ netif_err(priv, drv, priv->dev,
+ "failed to destroy rx queues\n");
+ /* This failure will trigger a reset - no need to clean up */
+ return err;
+ }
+ netif_dbg(priv, drv, priv->dev, "destroyed rx queues\n");
+ return err;
+}
+
static void gve_enable_supported_features(struct gve_priv *priv,
u32 supported_features_mask,
const struct gve_device_option_jumbo_frames
@@ -1784,3 +1808,29 @@ void gve_adminq_teardown_mgmt_irq(struct gve_priv *priv)
priv->mgmt_irq_requested = false;
}
}
+
+int gve_adminq_create_queues(struct gve_priv *priv)
+{
+ int num_tx_queues = gve_num_tx_queues(priv);
+ int err;
+
+ err = gve_adminq_create_tx_queues(priv, 0, num_tx_queues);
+ if (err) {
+ netif_err(priv, drv, priv->dev, "failed to create %d tx queues\n",
+ num_tx_queues);
+ return err;
+ }
+ netif_dbg(priv, drv, priv->dev, "created %d tx queues\n",
+ num_tx_queues);
+
+ err = gve_adminq_create_rx_queues(priv, priv->rx_cfg.num_queues);
+ if (err) {
+ netif_err(priv, drv, priv->dev, "failed to create %d rx queues\n",
+ priv->rx_cfg.num_queues);
+ return err;
+ }
+ netif_dbg(priv, drv, priv->dev, "created %d rx queues\n",
+ priv->rx_cfg.num_queues);
+
+ return err;
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index ff656fb4f113..03e8318f7327 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -628,6 +628,8 @@ int gve_adminq_configure_device_resources(struct gve_priv *priv,
dma_addr_t db_array_bus_addr,
u32 num_ntfy_blks);
int gve_adminq_deconfigure_device_resources(struct gve_priv *priv);
+int gve_adminq_create_queues(struct gve_priv *priv);
+int gve_adminq_destroy_queues(struct gve_priv *priv);
int gve_adminq_create_tx_queues(struct gve_priv *priv, u32 start_id, u32 num_queues);
int gve_adminq_destroy_tx_queues(struct gve_priv *priv, u32 start_id, u32 num_queues);
int gve_adminq_create_single_rx_queue(struct gve_priv *priv, u32 queue_index);
@@ -661,5 +663,4 @@ int gve_adminq_request_db_info(struct gve_priv *priv);
void gve_adminq_free_db_resources(struct gve_priv *priv);
int gve_adminq_setup_mgmt_irq(struct gve_priv *priv);
void gve_adminq_teardown_mgmt_irq(struct gve_priv *priv);
-
#endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_dqo.h b/drivers/net/ethernet/google/gve/gve_dqo.h
index 5871f773f0c7..ce402020dff6 100644
--- a/drivers/net/ethernet/google/gve/gve_dqo.h
+++ b/drivers/net/ethernet/google/gve/gve_dqo.h
@@ -66,7 +66,7 @@ void gve_rx_write_doorbell_dqo(const struct gve_priv *priv, int queue_idx);
void gve_xdp_tx_flush_dqo(struct gve_priv *priv, u32 xdp_qid);
static inline void
-gve_tx_put_doorbell_dqo(const struct gve_priv *priv,
+gve_tx_put_doorbell_dqo(struct gve_priv *priv,
const struct gve_queue_resources *q_resources, u32 val)
{
u64 index;
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index f2dd82f6c254..484f5a54a408 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -871,33 +871,15 @@ static int gve_unregister_qpls(struct gve_priv *priv)
static int gve_create_rings(struct gve_priv *priv)
{
- int num_tx_queues = gve_num_tx_queues(priv);
int err;
int i;
- err = gve_adminq_create_tx_queues(priv, 0, num_tx_queues);
- if (err) {
- netif_err(priv, drv, priv->dev, "failed to create %d tx queues\n",
- num_tx_queues);
- /* This failure will trigger a reset - no need to clean
- * up
- */
- return err;
- }
- netif_dbg(priv, drv, priv->dev, "created %d tx queues\n",
- num_tx_queues);
-
- err = gve_adminq_create_rx_queues(priv, priv->rx_cfg.num_queues);
- if (err) {
- netif_err(priv, drv, priv->dev, "failed to create %d rx queues\n",
- priv->rx_cfg.num_queues);
- /* This failure will trigger a reset - no need to clean
- * up
- */
+ err = priv->ctrl_ops->create_queues(priv);
+ /* This failure will trigger a reset - no need to clean
+ * up
+ */
+ if (err)
return err;
- }
- netif_dbg(priv, drv, priv->dev, "created %d rx queues\n",
- priv->rx_cfg.num_queues);
if (gve_is_gqi(priv)) {
/* Rx data ring has been prefilled with packet buffers at queue
@@ -1052,26 +1034,16 @@ static int gve_queues_mem_alloc(struct gve_priv *priv,
static int gve_destroy_rings(struct gve_priv *priv)
{
- int num_tx_queues = gve_num_tx_queues(priv);
int err;
- err = gve_adminq_destroy_tx_queues(priv, 0, num_tx_queues);
+ err = priv->ctrl_ops->destroy_queues(priv);
+
if (err) {
- netif_err(priv, drv, priv->dev,
- "failed to destroy tx queues\n");
/* This failure will trigger a reset - no need to clean up */
- return err;
- }
- netif_dbg(priv, drv, priv->dev, "destroyed tx queues\n");
- err = gve_adminq_destroy_rx_queues(priv, priv->rx_cfg.num_queues);
- if (err) {
netif_err(priv, drv, priv->dev,
- "failed to destroy rx queues\n");
- /* This failure will trigger a reset - no need to clean up */
- return err;
+ "failed to destroy queues\n");
}
- netif_dbg(priv, drv, priv->dev, "destroyed rx queues\n");
- return 0;
+ return err;
}
static void gve_queues_mem_free(struct gve_priv *priv,
@@ -2482,6 +2454,8 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
.free_db_resources = gve_adminq_free_db_resources,
.setup_mgmt_irq = gve_adminq_setup_mgmt_irq,
.teardown_mgmt_irq = gve_adminq_teardown_mgmt_irq,
+ .create_queues = gve_adminq_create_queues,
+ .destroy_queues = gve_adminq_destroy_queues,
};
static int gve_init_priv(struct gve_priv *priv)
--
2.55.0.571.g244d577d93-goog
next prev parent reply other threads:[~2026-08-03 18:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-03 18:46 [PATCH net-next v3 00/15] gve: AdminQ mode related refactors Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 01/15] gve: don't pass in unused parameter to gve_adminq_free Harshitha Ramamurthy
2026-08-04 18:46 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 02/15] gve: refactor initialization with helper functions Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 03/15] gve: add a few helper functions to set device properties Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 04/15] gve: add struct gve_device_info to hold " Harshitha Ramamurthy
2026-08-04 18:46 ` sashiko-bot
2026-08-06 7:19 ` Przemek Kitszel
2026-08-03 18:46 ` [PATCH net-next v3 05/15] gve: introduce control plane operations structure Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 06/15] gve: introduce ctrl ops to set vectors and Qs Harshitha Ramamurthy
2026-08-06 7:33 ` Przemek Kitszel
2026-08-03 18:46 ` [PATCH net-next v3 07/15] gve: introduce gve_adminq_get_device_properties() Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 08/15] gve: refactor gve_init_priv for reset path Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 09/15] gve: simplify reset logic Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-06 1:37 ` Jakub Kicinski
2026-08-03 18:46 ` [PATCH net-next v3 10/15] gve: add gve_ctrl_ops for gve initialization/teardown sequences Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 11/15] gve: split up notify block allocation and setup paths Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 12/15] gve: introduce new methods to handle IRQ doorbells Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 13/15] gve: setup and teardown management interrupts Harshitha Ramamurthy
2026-08-03 18:46 ` Harshitha Ramamurthy [this message]
2026-08-04 18:47 ` [PATCH net-next v3 14/15] gve: add ctrl ops to for queue operations sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 15/15] gve: add link status/speed ctrl ops Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803184630.3813311-15-hramamurthy@google.com \
--to=hramamurthy@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=debarghyak@google.com \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=john.fastabend@gmail.com \
--cc=jordanrhee@google.com \
--cc=joshwash@google.com \
--cc=kees@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maolson@google.com \
--cc=netdev@vger.kernel.org \
--cc=nktgrg@google.com \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
--cc=thostet@google.com \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox