From: Harshitha Ramamurthy <hramamurthy@google.com>
To: netdev@vger.kernel.org
Cc: joshwash@google.com, hramamurthy@google.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, ast@kernel.org,
daniel@iogearbox.net, hawk@kernel.org, john.fastabend@gmail.com,
sdf@fomichev.me, jordanrhee@google.com, willemb@google.com,
nktgrg@google.com, maolson@google.com, thostet@google.com,
jacob.e.keller@intel.com, debarghyak@google.com,
kees@kernel.org, bpf@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 06/15] gve: introduce ctrl ops to set vectors and Qs
Date: Mon, 3 Aug 2026 18:46:21 +0000 [thread overview]
Message-ID: <20260803184630.3813311-7-hramamurthy@google.com> (raw)
In-Reply-To: <20260803184630.3813311-1-hramamurthy@google.com>
Introduce following ctrl ops for Adminq mode. This change does
not introduce any functional change, just movement of code into
ops.
- set_num_queues to set maximum and default TX/RX queues in the
alloc structures used in the initialization flow.
- set_num_ntfy_blks op to set number of vectors(ntfy_blks) in the
initialization flow.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
drivers/net/ethernet/google/gve/gve.h | 6 ++
drivers/net/ethernet/google/gve/gve_adminq.c | 45 ++++++++++++++
drivers/net/ethernet/google/gve/gve_adminq.h | 2 +
drivers/net/ethernet/google/gve/gve_main.c | 64 +++-----------------
4 files changed, 63 insertions(+), 54 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 56148ea3cfbf..1bc5e32b6618 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -829,10 +829,16 @@ struct gve_device_info {
* struct gve_ctrl_ops - Control plane operations structure
* @map_db_bar: Maps the doorbell BAR for the device and store in @priv.
* @unmap_db_bar: Unmaps the doorbell BAR previously mapped by @map_db_bar.
+ * @set_num_queues: Sets default and max TX/RX queues into allocation
+ * structures stored in @priv to be used during initialization.
+ * @set_num_ntfy_blks: Sets no. of vectors into @priv to be used during
+ * initialization.
*/
struct gve_ctrl_ops {
int (*map_db_bar)(struct gve_priv *priv);
void (*unmap_db_bar)(struct gve_priv *priv);
+ void (*set_num_queues)(struct gve_priv *priv);
+ int (*set_num_ntfy_blks)(struct gve_priv *priv);
};
struct gve_priv {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 9c3ebdb547cf..1d9ae601cdeb 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1612,3 +1612,48 @@ void gve_adminq_unmap_db_bar(struct gve_priv *priv)
pci_iounmap(pdev, priv->db_bar2);
}
+
+int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv)
+{
+ int num_ntfy;
+
+ num_ntfy = pci_msix_vec_count(priv->pdev);
+ if (num_ntfy <= 0) {
+ dev_err(&priv->pdev->dev,
+ "could not count MSI-x vectors: err=%d\n", num_ntfy);
+ return num_ntfy;
+ } else if (num_ntfy < GVE_MIN_MSIX) {
+ dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
+ GVE_MIN_MSIX, num_ntfy);
+ return -EINVAL;
+ }
+
+ /* gvnic has one Notification Block per MSI-x vector, except for the
+ * management vector
+ */
+ priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
+ priv->mgmt_msix_idx = priv->num_ntfy_blks;
+
+ return 0;
+}
+
+void gve_adminq_set_num_queues(struct gve_priv *priv)
+{
+ struct gve_device_info *device_info = &priv->device_info;
+
+ priv->tx_cfg.max_queues =
+ min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
+ priv->rx_cfg.max_queues =
+ min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
+
+ priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
+ priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
+ if (device_info->default_tx_queues > 0)
+ priv->tx_cfg.num_queues = min_t(int,
+ device_info->default_tx_queues,
+ priv->tx_cfg.num_queues);
+ if (device_info->default_rx_queues > 0)
+ priv->rx_cfg.num_queues = min_t(int,
+ device_info->default_rx_queues,
+ priv->rx_cfg.num_queues);
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 2a184e051202..52fe4a9f7b87 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -658,5 +658,7 @@ int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
struct gve_ptype_lut *ptype_lut);
int gve_adminq_map_db_bar(struct gve_priv *priv);
void gve_adminq_unmap_db_bar(struct gve_priv *priv);
+int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv);
+void gve_adminq_set_num_queues(struct gve_priv *priv);
#endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index fff63b90dcbb..ce55f845a6f9 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2398,56 +2398,6 @@ static const struct xdp_metadata_ops gve_xdp_metadata_ops = {
.xmo_rx_timestamp = gve_xdp_rx_timestamp,
};
-static int gve_set_num_ntfy_blks(struct gve_priv *priv)
-{
- int num_ntfy;
-
- num_ntfy = pci_msix_vec_count(priv->pdev);
- if (num_ntfy <= 0) {
- dev_err(&priv->pdev->dev,
- "could not count MSI-x vectors: err=%d\n", num_ntfy);
- return num_ntfy;
- } else if (num_ntfy < GVE_MIN_MSIX) {
- dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
- GVE_MIN_MSIX, num_ntfy);
- return -EINVAL;
- }
-
- /* gvnic has one Notification Block per MSI-x vector, except for the
- * management vector
- */
- priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
- priv->mgmt_msix_idx = priv->num_ntfy_blks;
-
- return 0;
-}
-
-static void gve_set_num_queues(struct gve_priv *priv)
-{
- struct gve_device_info *device_info = &priv->device_info;
-
- priv->tx_cfg.max_queues =
- min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
- priv->rx_cfg.max_queues =
- min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
-
- priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
- priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
- if (device_info->default_tx_queues > 0)
- priv->tx_cfg.num_queues = min_t(int,
- device_info->default_tx_queues,
- priv->tx_cfg.num_queues);
- if (device_info->default_rx_queues > 0)
- priv->rx_cfg.num_queues = min_t(int,
- device_info->default_rx_queues,
- priv->rx_cfg.num_queues);
-
- dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
- priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
- dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
- priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
-}
-
static void gve_set_desc_cnt(struct gve_priv *priv)
{
struct gve_device_info *device_info = &priv->device_info;
@@ -2509,8 +2459,10 @@ static void gve_set_buf_sizes(struct gve_priv *priv)
}
static const struct gve_ctrl_ops gve_adminq_ops = {
- .map_db_bar = gve_adminq_map_db_bar,
- .unmap_db_bar = gve_adminq_unmap_db_bar,
+ .map_db_bar = gve_adminq_map_db_bar,
+ .unmap_db_bar = gve_adminq_unmap_db_bar,
+ .set_num_queues = gve_adminq_set_num_queues,
+ .set_num_ntfy_blks = gve_adminq_set_num_ntfy_blks,
};
static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
@@ -2549,14 +2501,18 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
priv->queue_format = priv->device_info.queue_format;
- err = gve_set_num_ntfy_blks(priv);
+ err = priv->ctrl_ops->set_num_ntfy_blks(priv);
if (err) {
dev_err(&priv->pdev->dev,
"Could not setup notify blocks: err=%d\n", err);
goto err;
}
- gve_set_num_queues(priv);
+ priv->ctrl_ops->set_num_queues(priv);
+ dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
+ priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
+ dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
+ priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
if (gve_is_dqo(priv)) {
/* DQO supports HW-GRO and UDP_GSO */
--
2.55.0.571.g244d577d93-goog
next prev parent reply other threads:[~2026-08-03 18:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-03 18:46 [PATCH net-next v3 00/15] gve: AdminQ mode related refactors Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 01/15] gve: don't pass in unused parameter to gve_adminq_free Harshitha Ramamurthy
2026-08-04 18:46 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 02/15] gve: refactor initialization with helper functions Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 03/15] gve: add a few helper functions to set device properties Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 04/15] gve: add struct gve_device_info to hold " Harshitha Ramamurthy
2026-08-04 18:46 ` sashiko-bot
2026-08-06 7:19 ` Przemek Kitszel
2026-08-03 18:46 ` [PATCH net-next v3 05/15] gve: introduce control plane operations structure Harshitha Ramamurthy
2026-08-03 18:46 ` Harshitha Ramamurthy [this message]
2026-08-06 7:33 ` [PATCH net-next v3 06/15] gve: introduce ctrl ops to set vectors and Qs Przemek Kitszel
2026-08-03 18:46 ` [PATCH net-next v3 07/15] gve: introduce gve_adminq_get_device_properties() Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 08/15] gve: refactor gve_init_priv for reset path Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 09/15] gve: simplify reset logic Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-06 1:37 ` Jakub Kicinski
2026-08-03 18:46 ` [PATCH net-next v3 10/15] gve: add gve_ctrl_ops for gve initialization/teardown sequences Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 11/15] gve: split up notify block allocation and setup paths Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 12/15] gve: introduce new methods to handle IRQ doorbells Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 13/15] gve: setup and teardown management interrupts Harshitha Ramamurthy
2026-08-03 18:46 ` [PATCH net-next v3 14/15] gve: add ctrl ops to for queue operations Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
2026-08-03 18:46 ` [PATCH net-next v3 15/15] gve: add link status/speed ctrl ops Harshitha Ramamurthy
2026-08-04 18:47 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803184630.3813311-7-hramamurthy@google.com \
--to=hramamurthy@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=debarghyak@google.com \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=john.fastabend@gmail.com \
--cc=jordanrhee@google.com \
--cc=joshwash@google.com \
--cc=kees@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maolson@google.com \
--cc=netdev@vger.kernel.org \
--cc=nktgrg@google.com \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
--cc=thostet@google.com \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox