Linux brcm80211 wireless device drivers
 help / color / mirror / Atom feed
* [PATCH] wifi: brcmsmac: Spelling corrections
@ 2025-04-15 16:06 Simon Horman
  2025-04-18 17:20 ` Arend Van Spriel
  0 siblings, 1 reply; 2+ messages in thread
From: Simon Horman @ 2025-04-15 16:06 UTC (permalink / raw)
  To: Arend van Spriel; +Cc: linux-wireless, brcm80211, brcm80211-dev-list.pdl

Various spelling corrections as flagged by codespell.

Signed-off-by: Simon Horman <horms@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.c     | 6 +++---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.h     | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c       | 4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c     | 4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/dma.c         | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c | 4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c        | 4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h        | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c         | 2 +-
 9 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.c
index 50d817485cf9..0cb64fc56783 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.c
@@ -198,7 +198,7 @@
 #define	CST4313_SPROM_OTP_SEL_SHIFT		0
 
 /* 4313 Chip specific ChipControl register bits */
- /* 12 mA drive strengh for later 4313 */
+ /* 12 mA drive strength for later 4313 */
 #define CCTRL_4313_12MA_LED_DRIVE    0x00000007
 
 /* Manufacturer Ids */
@@ -453,7 +453,7 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 	/* get chipcommon chipstatus */
 	sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
 
-	/* get chipcommon capabilites */
+	/* get chipcommon capabilities */
 	sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));
 
 	/* get pmu rev and caps */
@@ -657,7 +657,7 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
 }
 
 /*
- *  clock control policy function throught chipcommon
+ *  clock control policy function through chipcommon
  *
  *    set dynamic clk control mode (forceslow, forcefast, dynamic)
  *    returns true if we are forcing fast clock
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.h
index 90b6e3982d2c..e791dd07ca78 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.h
@@ -76,7 +76,7 @@
  * conventions for the use the flash space:
  */
 
-/* Minumum amount of flash we support */
+/* Minimum amount of flash we support */
 #define FLASH_MIN		0x00020000	/* Minimum flash size */
 
 #define	CC_SROM_OTP		0x800	/* SROM/OTP address space */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c
index a767cbb79185..e1d707a7c964 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c
@@ -479,7 +479,7 @@ void brcms_c_ampdu_reset_session(struct brcms_ampdu_session *session,
 
 /*
  * Preps the given packet for AMPDU based on the session data. If the
- * frame cannot be accomodated in the current session, -ENOSPC is
+ * frame cannot be accommodated in the current session, -ENOSPC is
  * returned.
  */
 int brcms_c_ampdu_add_frame(struct brcms_ampdu_session *session,
@@ -529,7 +529,7 @@ int brcms_c_ampdu_add_frame(struct brcms_ampdu_session *session,
 	}
 
 	/*
-	 * Now that we're sure this frame can be accomodated, update the
+	 * Now that we're sure this frame can be accommodated, update the
 	 * session information.
 	 */
 	session->ampdu_len += len;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
index d1b9a18d0374..3878c4124e25 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
@@ -445,7 +445,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 		/*
 		 * OFDM 40 MHz SISO has the same power as the corresponding
-		 * MCS0-7 rate unless overriden by the locale specific code.
+		 * MCS0-7 rate unless overridden by the locale specific code.
 		 * We set this value to 0 as a flag (presumably 0 dBm isn't
 		 * a possibility) and then copy the MCS0-7 value to the 40 MHz
 		 * value if it wasn't explicitly set.
@@ -479,7 +479,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 		/*
 		 * 20 MHz has the same power as the corresponding OFDM rate
-		 * unless overriden by the locale specific code.
+		 * unless overridden by the locale specific code.
 		 */
 		txpwr->mcs_20_siso[i] = txpwr->ofdm[i];
 		txpwr->mcs_40_siso[i] = 0;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/dma.c
index 80c35027787a..c739bf7463b3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/dma.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/dma.c
@@ -1348,7 +1348,7 @@ static void prep_ampdu_frame(struct dma_info *di, struct sk_buff *p)
 	ret = brcms_c_ampdu_add_frame(session, p);
 	if (ret == -ENOSPC) {
 		/*
-		 * AMPDU cannot accomodate this frame. Close out the in-
+		 * AMPDU cannot accommodate this frame. Close out the in-
 		 * progress AMPDU session and start a new one.
 		 */
 		ampdu_finalize(di);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 5b1d35601bbd..1c3d29dca424 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -48,9 +48,9 @@
 	FIF_BCN_PRBRESP_PROMISC | \
 	FIF_PSPOLL)
 
-#define CHAN2GHZ(channel, freqency, chflags)  { \
+#define CHAN2GHZ(channel, frequency, chflags)  { \
 	.band = NL80211_BAND_2GHZ, \
-	.center_freq = (freqency), \
+	.center_freq = (frequency), \
 	.hw_value = (channel), \
 	.flags = chflags, \
 	.max_antenna_gain = 0, \
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
index 2738d4d6c60a..c1a9c1e442ee 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c
@@ -921,7 +921,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
 		 * The "fallback limit" is the number of tx attempts a given
 		 * MPDU is sent at the "primary" rate. Tx attempts beyond that
 		 * limit are sent at the "secondary" rate.
-		 * A 'short frame' does not exceed RTS treshold.
+		 * A 'short frame' does not exceed RTS threshold.
 		 */
 		u16 sfbl,	/* Short Frame Rate Fallback Limit */
 		    lfbl,	/* Long Frame Rate Fallback Limit */
@@ -6259,7 +6259,7 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw,
 		}
 
 		/*
-		 * Currently only support same setting for primay and
+		 * Currently only support same setting for primary and
 		 * fallback rates. Unify flags for each rate into a
 		 * single value for the frame
 		 */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
index 9f76b880814e..b7ca0d9891c4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
@@ -603,7 +603,7 @@ enum brcms_bss_type {
  * cur_etheraddr: h/w address
  * flags: BSSCFG flags; see below
  *
- * current_bss: BSS parms in ASSOCIATED state
+ * current_bss: BSS parameters in ASSOCIATED state
  *
  *
  * ID: 'unique' ID of this bsscfg, assigned at bsscfg allocation
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c
index 71b80381f3ad..c9a29e626daa 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/pmu.c
@@ -31,7 +31,7 @@
 #define EXT_ILP_HZ 32768
 
 /*
- * Duration for ILP clock frequency measurment in milliseconds
+ * Duration for ILP clock frequency measurement in milliseconds
  *
  * remark: 1000 must be an integer multiple of this duration
  */


^ permalink raw reply related	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-04-18 17:20 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-04-15 16:06 [PATCH] wifi: brcmsmac: Spelling corrections Simon Horman
2025-04-18 17:20 ` Arend Van Spriel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox