Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit:trunk/buildroot/toolchain/binutils/2.17.50.0.17
Date: Mon, 25 Feb 2008 06:50:55 +0100	[thread overview]
Message-ID: <010001c87777$b0949440$020514ac@atmel.com> (raw)
In-Reply-To: 20080225002503.6253D12C6E8@busybox.net

Why is the patch below called "toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch"
when it is affecting "binutils-2.16.91.0.7/*" ?

I assume it is not be applied to all binutils versions?
Why only this version?


Best Regards
Ulf Samuelsson


----- Original Message ----- 
From: <sjhill@uclibc.org>
To: <buildroot@uclibc.org>
Sent: Monday, February 25, 2008 1:25 AM
Subject: [Buildroot] svn commit:trunk/buildroot/toolchain/binutils/2.17.50.0.17


> Author: sjhill
> Date: 2008-02-24 16:25:02 -0800 (Sun, 24 Feb 2008)
> New Revision: 21110
> 
> Log:
> Copy patch needed for dynamic loader strings and config targets.
> 
> 
> Added:
>   trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch
> 
> 
> Changeset:
> Copied: trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch (from rev 21109, trunk/buildroot/toolchain/binutils/2.17.50.0.16/100-uclibc-conf.patch)
> ===================================================================
> --- trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch                         (rev 0)
> +++ trunk/buildroot/toolchain/binutils/2.17.50.0.17/100-uclibc-conf.patch 2008-02-25 00:25:02 UTC (rev 21110)
> @@ -0,0 +1,139 @@
> +--- binutils-2.16.91.0.7/bfd/configure
> ++++ binutils-2.16.91.0.7/bfd/configure
> +@@ -3576,7 +3576,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   lt_cv_deplibs_check_method=pass_all
> +   ;;
> + 
> +--- binutils-2.16.91.0.7/binutils/configure
> ++++ binutils-2.16.91.0.7/binutils/configure
> +@@ -3411,7 +3411,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   lt_cv_deplibs_check_method=pass_all
> +   ;;
> + 
> +--- binutils-2.16.91.0.7/configure
> ++++ binutils-2.16.91.0.7/configure
> +@@ -1270,7 +1270,7 @@
> +   am33_2.0-*-linux*)
> +     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
> +     ;;
> +-  sh-*-linux*)
> ++  sh*-*-linux*)
> +     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
> +     ;;    
> +   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
> +@@ -1578,7 +1578,7 @@
> +   romp-*-*)
> +     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
> +     ;;
> +-  sh-*-* | sh64-*-*)
> ++  sh*-*-* | sh64-*-*)
> +     case "${host}" in
> +       i[3456789]86-*-vsta) ;; # don't add gprof back in
> +       i[3456789]86-*-go32*) ;; # don't add gprof back in
> +--- binutils-2.16.91.0.7/configure.ac
> ++++ binutils-2.16.91.0.7/configure.ac
> +@@ -468,7 +468,7 @@
> +   am33_2.0-*-linux*)
> +     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
> +     ;;
> +-  sh-*-linux*)
> ++  sh*-*-linux*)
> +     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
> +     ;;    
> +   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
> +@@ -776,7 +776,7 @@
> +   romp-*-*)
> +     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
> +     ;;
> +-  sh-*-* | sh64-*-*)
> ++  sh*-*-* | sh64-*-*)
> +     case "${host}" in
> +       i[[3456789]]86-*-vsta) ;; # don't add gprof back in
> +       i[[3456789]]86-*-go32*) ;; # don't add gprof back in
> +--- binutils-2.16.91.0.7/gas/configure
> ++++ binutils-2.16.91.0.7/gas/configure
> +@@ -3411,7 +3411,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   lt_cv_deplibs_check_method=pass_all
> +   ;;
> + 
> +--- binutils-2.16.91.0.7/gprof/configure
> ++++ binutils-2.16.91.0.7/gprof/configure
> +@@ -3419,6 +3419,11 @@
> +   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
> +   ;;
> + 
> ++linux-uclibc*)
> ++  lt_cv_deplibs_check_method=pass_all
> ++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
> ++  ;;
> ++
> + netbsd* | knetbsd*-gnu)
> +   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
> +     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
> +--- binutils-2.16.91.0.7/ld/configure
> ++++ binutils-2.16.91.0.7/ld/configure
> +@@ -3413,7 +3413,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   lt_cv_deplibs_check_method=pass_all
> +   ;;
> + 
> +--- binutils-2.16.91.0.7/libtool.m4
> ++++ binutils-2.16.91.0.7/libtool.m4
> +@@ -739,7 +739,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   lt_cv_deplibs_check_method=pass_all
> +   ;;
> + 
> +--- binutils-2.16.91.0.7/ltconfig
> ++++ binutils-2.16.91.0.7/ltconfig
> +@@ -602,6 +602,7 @@
> + 
> + # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
> + case $host_os in
> ++linux-uclibc*) ;;
> + linux-gnu*) ;;
> + linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
> + esac
> +@@ -1247,7 +1248,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   version_type=linux
> +   need_lib_prefix=no
> +   need_version=no
> +--- binutils-2.16.91.0.7/opcodes/configure
> ++++ binutils-2.16.91.0.7/opcodes/configure
> +@@ -3579,7 +3579,7 @@
> +   ;;
> + 
> + # This must be Linux ELF.
> +-linux-gnu*)
> ++linux-gnu*|linux-uclibc*)
> +   lt_cv_deplibs_check_method=pass_all
> +   ;;
> + 
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>

  reply	other threads:[~2008-02-25  5:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-25  0:25 [Buildroot] svn commit: trunk/buildroot/toolchain/binutils/2.17.50.0.17 sjhill at uclibc.org
2008-02-25  5:50 ` Ulf Samuelsson [this message]
  -- strict thread matches above, loose matches on Subject: below --
2007-06-25 10:40 aldot at uclibc.org

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='010001c87777$b0949440$020514ac@atmel.com' \
    --to=ulf.samuelsson@atmel.com \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox